Hello guys, i am new here and I am seeking help from the more experienced
To cut to the chase and make a long story short, my Galaxy Tab 2 is currently in a boot loop in ClockworkMod recovery. (I was trying to flash my first ROM, got Status 7, and while waiting for my order of OEM USB cable to come as to fix the problem, my data got deleted one day idk how) The tablet model is 10.1 P5113
It probably doesn't seem like a big deal until you find out that you can't flash roms from internal; storage (all my data got deleted somehow and I figured I was screwed after reading "no data found" on the script)
But what makes matters worse is that I cannot flash a stock ROM via ODIN...this is because USB Debugging was left disabled...i never knew i would need it now lol. What sucks also is that I have no nandroid backups to fall back on...
Basically, I have a tablet that boots into CWM and has no data to rely on whatsoever, it really sucks...no USB Debugging means I cannot flash my out of this predicament with ODIN either. I have a Windows PC (Windows 7) and a OEM USB cable. My tablet model again is 10.1 P5113
May somebody please give me advice on how to take this? I want to get out of this bootloop, get some rom running (even stock) and get another go at flashing my custom rom. I would greatly appreciate any advice from anybody)
I found a solution by flashing the stock rom via ODIN. It turns out stock roms do not need USB debugging to be enabled, so I saved my tablet....
I am going to switch to TWRP Recovery as soon as I can
Thread closed as user already founded by himself a solution.
Related
Hi all,
I've got a Nexus S 4G CDMA Sprint phone running Stock ICS 4.0.4 IMM76D.
My bootloader is unlocked from previous roots and whatnot.
My problem is that my phone is not being recognized by my computer at all. We're talking complete nonrecognition. No yellow triangle in device manager, no pop-ups, nothing. This phone will just not be read by my computer! I've tried different cords, different computers, re-installation of drivers after resetting my computer, installed PDA net, did a factory reset on the phone, I've literally been on Google for hours upon hours upon hours trying to figure this out and can't figure out why the computer is not recognizing the phone and why the phone is not allowing me to put it into usb mounting. It is however, charging via the computer and wall plug. I can get into stock 3e android recovery, fastboot using V-Up and Power and I can get it into download mode. It is NOT recognized in any modes by the computer nor other computers including my Linux box. The phone states that the usb control initializes but then ends a moment later. I am thinking this is a hardware issue but that leaves me with two issues:
If I was to go to Sprint to have it fixed they would realize my bootloader was unlocked thus voiding the warranty and I'd feel like quite an idiot at the store
If it is hardware related why is the charge working on the device.
I have also tried to bend up the usb plate to make it touch the pins better but that did not help at all. I am at my wits end and really need some help here, I've done everything I could find on Google and here plus more. I want to just return it but with the bootloader unlocked this is really not a possibility. I am looking for help to either become able to lock the bootloader without it having to be connected via the computer so I can then get it fixed if it is hardware related or if I can get the darn thing to be read by the computer once more. so yea, this is where I am at and I would appreciate it so much if someone could help me out, thanks guys!!!
Wireless adb in playstore should help.
Sent from my Nexus S 4G using XDA
That would be perfect! Only problem is that it requires root access on the phone which I am unable to obtain because I cannot access the phone. Is there a way to root the phone without having to connect it via the computer? Something like an update.zip with files able to be flashed through android recovery 3e? If I can get root access than wireless adb would be perfect.
*ultimately if I could remove signature checking in Android Recovery 3e that would work so I could in turn try to root the phone and install a different recovery to then try a different rom to see if that in turn fixes the issue.
Ebicoustic said:
That would be perfect! Only problem is that it requires root access on the phone which I am unable to obtain because I cannot access the phone. Is there a way to root the phone without having to connect it via the computer? Something like an update.zip with files able to be flashed through android recovery 3e? If I can get root access than wireless adb would be perfect.
*ultimately if I could remove signature checking in Android Recovery 3e that would work so I could in turn try to root the phone and install a different recovery to then try a different rom to see if that in turn fixes the issue.
Click to expand...
Click to collapse
You might be able to download your rom of choice and rename it update.zip. I'm not sure if it will flash though....someone else chime in if I'm wrong. You can use wireless file transfer if needed.
Sent from my Nexus S 4G using XDA
Yea I've tried that, everything gets shot down by the recovery with a E:Signature Verification Failed. Thank you for your help so far but I don't think this is something that is going to be helped. I've put in a ticket to Samsung for a repair under it's warranty. In the past I've sent in a rooted phone and they've fixed it so I think I'm going to give that a shot. Just don't want to be without a phone for 2+ weeks.
Well good luck...you are running stock unrooted so it shouldn't matter. It is a dev phone for damn sake. Sorry couldn't help.
Sent from my Nexus S 4G using XDA
Well if you want to download a custom rom... Since you are on this forum. Download any rom (preferably CM9 since its quite good from my experience). Flash the stable version and wait till everything is completed. Now when you flash make sure you download a recovery...eg ClockWorkMod Recovery from google market. You should now have a custom rom installed and download wireless adb as chappy said. See if that works
Ok guys here is the issue. I don't know what has happened but my computer will not at all detect my tablet if plugged in through USB. Even plugging in via download mode is useless because ODIN doesn't detect it. I have a feeling that the USB cable has broken so I have ordered a new one.
Apart from that, only other menu I can get into is CWM. I fomatted my tablet fully and when I try to flash any roms available here for T869, the tablet is just stuck at the samsung logo and doesn't move further. And as we all know, the development on T869 is dead to none, therefore I cannot try any other decent roms here.
What I am asking for is, if someone can do a nandroid backup of stock or even their current ROM which is working right now on T869, I can then flash that back onto mine via CWM and HOPEFULLY get the tablet working.
Please help. PM me or post below if anything. Thank you.
Can someone Plz update??? My tablet is dead without this
Stilll looking
Hey everyone
I have a Samsung Galaxy Note 10.1 tablet GT-N8013. I accidentally installed the wrong rom. Fixed the fact that my /efs wasn't working rewrote it with the backup or so I thought as it was inaccessible. Anyhow my issue is USB works in download mode. It does not work IN the OS nor can I charge via USB on stock. I need some help to fix this.
I reloaded stock rom via ODIN, and no change.
Help!!!
Thanks
Hello everyone,
I am a newbie and this was my first root/flash so please bare with me. I recently installed Gnabo rom on my note 10.1 gt-n8013 by flashing the cwm recovery and then installing the zip files from a guide i found online.
After I tried it out, it turned out to be a little buggy, and so I want to switch back to stock. However, my tablet is not being recognized on my computer. I've tried different computers and have bought a new USB with no luck. I have cleared all cache in recovery, cleared everything, uninstalled everything and it is still not working. I have enable USB debugging every time, and have tried without it. I do have the correct drivers installed on the computers. Please help if you can. I will try to flash the stock version if I can find a link to one with mobile odin (so far I have been unable to find a download of the stock firmware that the note came with).
UPDATE:
So I downloaded a stock firmware, turned out it was for note 2 (I think someone posted wrong link) and I flashed it with mobile odin. So now, It shows note 2 at startup and then a black screen. That's it. I am able to go into download mode but that won't do much since I am still unable to get the tablet connected to my pc. Any help would be appreciated!
I have a Galaxy Tab A 2016 SM-T580, which I Flashed TWRP onto. Had issues at first getting it to mount internal storage, but I got that resolved. Tho now it wont mount my SD Card. THe bigger issue tho is, when I boot into the stock rom, Wifi will no longer turn on, when I try to turn it on, it just says its turning on, and just hangs there, doesn't do anything. The other issue is when I connect my tablet to my laptop via USB, it says connected device cannot access the tablets data, so I can't transer files or anything. IDK what to do to resolve these. I thought about reflashing the stock ROM via ODIN, but wasn't sure if that was a good idea. I would like to just flash back to stock recovery and ROM, if possible, but IDK how to do it on this device. But if someone could at least help me fix the WiFi issue, then I could at least download the proper files to the tablet allowing to me to fix the other issue of not being able to transfer files perhaps.
I posted this question in the Galaxy Tab A forums, but I've yet to get a reply after 3 days, meanwhile my tablet is useless.
bump