Have a Telstra One XL 1.89 - after hours of reading/researching I finally rooted the phone and flashed TWRP (ver 2.2.2.0) recovery with a custom ROM.
Everything was working fine until I tried to install a different ROM - I made a backup via TWRP, installed the new ROM but it wouldn't boot ... no worries I had the backup ... I accidentally selected FACTORY RESET from the bootloader instead of RECOVERY which seemed to have wiped all my data on the internal SD card - so my backup has been wiped.
I'm still able to access TWRP so I thought I could simply mount my SD card to my computer and copy my old ROM to flash - however I can't mount the SD card from TWRP - TWRP's console is throwing up "E:failed to mount /sdcard (Invalid argument)" and "E:Unable to mount /sdcard when trying to read settings file." errors - hence in the Mount menu, I can't check the "Mount SDCard" checkbox! (WTF?) - I Google'd this and someone advised that you will need to partition the SD card from within TWRP before it will allow you to mount it - I tried partitioning it but still throwing up those errors
I can also access the device from command prompt via adb - so I tried to flash a rom directly via fastboot but it throws up a "FAILED (remote: not allowed)" when it tries to flash it.
What are my options here? Am I completely screwed? I'm currently in the process of downloading the Telstra RUU - will this even work in my case?? Any help would be GREATLY appreciated - pulling my hair out here ... 2 week old phone
The RUU will make it all better
just lock your bootloader again before you run it
Look who's still floating
Sent from my HTC One X using xda premium
So you could post here when you didn't have a hox but I can't? Oooookayyyy.
In my heart I always had a hox......now I hate this p.o.s yet I'm still here, smh
My fastboot oem unlock tabby will be here Tuesday tho
Sent from my HTC One X using xda premium
slavlazar said:
Have a Telstra One XL 1.89 - after hours of reading/researching I finally rooted the phone and flashed TWRP (ver 2.2.2.0) recovery with a custom ROM.
Everything was working fine until I tried to install a different ROM - I made a backup via TWRP, installed the new ROM but it wouldn't boot ... no worries I had the backup ... I accidentally selected FACTORY RESET from the bootloader instead of RECOVERY which seemed to have wiped all my data on the internal SD card - so my backup has been wiped.
I'm still able to access TWRP so I thought I could simply mount my SD card to my computer and copy my old ROM to flash - however I can't mount the SD card from TWRP - TWRP's console is throwing up "E:failed to mount /sdcard (Invalid argument)" and "E:Unable to mount /sdcard when trying to read settings file." errors - hence in the Mount menu, I can't check the "Mount SDCard" checkbox! (WTF?) - I Google'd this and someone advised that you will need to partition the SD card from within TWRP before it will allow you to mount it - I tried partitioning it but still throwing up those errors
I can also access the device from command prompt via adb - so I tried to flash a rom directly via fastboot but it throws up a "FAILED (remote: not allowed)" when it tries to flash it.
What are my options here? Am I completely screwed? I'm currently in the process of downloading the Telstra RUU - will this even work in my case?? Any help would be GREATLY appreciated - pulling my hair out here ... 2 week old phone
Click to expand...
Click to collapse
Hey mate,
RUU will work but before you do just try mounting it through twrp then plugging it into your pc.
When you're in the mount menu in twrp make sure you hit mount usb storage for Windows to recognise it.
When I did this I got a prompt in Windows that said it needed to format the drive so I formatted it then just copied over the rom I wanted to flash then unmounted and flashed the rom.
Sent from my HTC One XL using xda premium
Hi there, I seem to have messed up my mounting partitions while trying to deodex Stock JB Central Europe. I basically used xultimate to pull the files and deodex then tried using adb shell to mount the system partition and copy them over. After I rebooted the phone, it would get stuck on unlocked bootloader warning or on the motorola logo. I hard reset into recovery and restored a nandroid backup and once booted into android found so many folders under the Storage folder such as "asec", "obb", rfs0" and so on. Now, when I try to wipe dalvik-cache in recovery, i get the following error: "E: unknown volume for path [/sd-ext]". Also, when i try flashing custom rom's and reboot, it gets stuck on the unlocked bootloader warning and wont load - while in recovery after flashing, i also get another error something like this: "E: cant load /cache/recovery.log" or similar. I also sometimes have issues mounting system, cache partitions, data and internal storage, all depending on which custom recovery i am using. I read on another site that downgrading to ics might solve mounting problems so I forced a downgrade to ics but that didnt work either and am still on ics.
Is there a way to restore the partitions correctly or are they stuck this way? Would mounting and remounting solve this problem? Any help would be much appreciated and would very much appreciate it if someone could upload their mount point info so i could use to try and fix it.
Many thanks in advance.
EDIT: Managed to flash Slim Bean 4.3 Official using OUDHS recovery without wiping cache and dalvik-cache at first. After reboot, it would bootloop so went to recovery and wiped cache and dalvik-cache then it worked. Still no sd-ext and some apps can't write or backup to external memory such as Go Backup & Restore Pro so what remains is to mount/unmount the partitions correctly.
Alright so what I currently have is an htc one s that has been running MaximusHD for about 2 years.
Randomly today everything crashed and TWRP is now asking for a password when you load recovery, not password was ever set.
ADB and fastboot both recognize the phone when it's plugged into the pc. However, trying to format data doesn't work and says that it was unable to mount /cache /data and internal storage.
Phone is s-off with superCID and unlocked bootloader. Trying fastboot oem lock to flash an RUU returns FAILED <status read failed <Too many links>>
dmseg.txt and mmc.txt attached.
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Same problem
harshgoswami said:
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Click to expand...
Click to collapse
I'm also facing same problem.......shows 0MB in Internal storage(twrp).......and stuck with YU logo doesnt go further....
I am also facing the exact same problem. Did you find any solution ??
BOTDeveloper said:
I am also facing the exact same problem. Did you find any solution ??
Click to expand...
Click to collapse
same here. any solution?? please help guys !
Facing same problem. Did anyone solve the issue?
cm-13.0-20161219-NIGHTLY-lettuce.zip apply this update from sd card it works
Guys ,..... anybody plz any solutions..... developers!!
facing exact same problem
guys facing exact same problem. searched everywhere but couldn't find any solution. im very much frustrated right now. tried everything . nothing works
facing same problem
any update on howm top solvew thisa guys?
Solution for 0 MB storage in TWRP
Hi Brothers!
It's my first time posting here , so if i make a mistake i am sorry in advance for that.
Solution for 0 MB storage in TWRP is very easy.
You need to boot your phone into TWRP.
In 2nd step you need to go to WIPE option .
Select Data and click on FS Options e.g. trying to change its partition format, most phones use Ext4.
Do same with the Data.
And TADA!!!!
Your problem is solved
I hope it helps you guys getting answer after a long time because i saw it late. Sorry for that.
same problem
BOTDeveloper said:
I am also facing the exact same problem. Did you find any solution ??
Click to expand...
Click to collapse
Try to wipe everything
Format data using twrp
It should be solved.
Hi my YU Yuphoria 5010 started acting up since last week ,when i noticed that the phone was restarting randomly and the settings was missing and even if i clicked on the settings logo in the notification panel, nothing would happen .So i decided to flash a Cusstom ROM instead and boot into recovery.While trying to wipe cache,dalvik and data I got an error message "uable to mount data,cache ,system(invalid argument) and internal memory* was showing up as 0.So i thought my phone was bricked and tried reviving it with the sd card method.But everything else except for system flashed , and got an error FAILED (remote: flash write failure ) just for system .Anyway now I could boot into recovery using fastboot boot command and the internal memory started showing up correcty. The fastboot command is the only way i could get into recovery, if i try power+volume down it would just come up with the empty battery logo. After this i installed qualcomm drivers and manually changed the driver to Qualcomm HS-USB QD Loader 9008 and tried flashing through QFil with a flashable stock ROM and ended up with the error message:"Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol** at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)** at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail".
But after going through some of the posts I found that my phone might not be bricked in the first place.My device just shows up as 'Android' under Other devices in Device Manager.
The following are the details from device manager.
Device type: Other devices
Manufacturer: Unknown
Location Port_#002.Hub_#003
Problem code : 0000001C
Physical Device Object name: \Device\USBPDO-6
Hardware IDS: USB\VID_2A96&PID_300A&REV_0100
USB\VID_2A96&PID_300A
{259abffc-50a7-47ce-af08-68c9a7d73366}[13]: 6.0
{6a3433f4-5626-40e8-a9b9-dbd9ecd2884b}[4]: <true>
{6a3433f4-5626-40e8-a9b9-dbd9ecd2884b}[6]: <true>
I also tried to restore through TWRP recovery using the back up my brother created on his YU 5010A to no success.Changing the file system type and back to ext4 also didnt help. I use a Windows 10 64bit Laptop.
What could I possibly do to revive my phone?Kindly help.
Sent from my HUAWEI Y560-L01 using XDA Free mobile app
Not working for me
rahman.khan001 said:
Hi Brothers!
It's my first time posting here , so if i make a mistake i am sorry in advance for that.
Solution for 0 MB storage in TWRP is very easy.
You need to boot your phone into TWRP.
In 2nd step you need to go to WIPE option .
Select Data and click on FS Options e.g. trying to change its partition format, most phones use Ext4.
Do same with the Data.
And TADA!!!!
Your problem is solved
I hope it helps you guys getting answer after a long time because i saw it late. Sorry for that.
Click to expand...
Click to collapse
Not getting any help as the same failed to mount issue is continuing.
puriadeb said:
Not getting any help as the same failed to mount issue is continuing.
Click to expand...
Click to collapse
Wipe everything include system,internal storage and data.
Reboot TWRP to recovery again
Now check your internal storage will be mounted
After it connect phone with pc in mtp mode ( TWRP)
Copy any custom ROM
Then install it through recovery
Enjoy
nischait said:
Wipe everything include system,internal storage and data.
Reboot TWRP to recovery again
Now check your internal storage will be mounted
After it connect phone with pc in mtp mode ( TWRP)
Copy any custom ROM
Then install it through recovery
Enjoy
Click to expand...
Click to collapse
Hi,
I have tried this several times without any help.
Cache format issue .Solved using advanced wipe in TWRP
harshgoswami said:
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Click to expand...
Click to collapse
open TWRP recovery.Go to wipe section and select advanced wipe option here .Now select data and cache from check boxes.then click on change partition format.Select ext4fs .Wipe it then wait for sometime because sometimes it takes approximately 15-20 mins so be patient .It will successfully wipe and then you can see that everything is up to the mark !
puriadeb said:
Hi,
I have tried this several times without any help.
Click to expand...
Click to collapse
flash stock cyanogen rom again. Then install TWRP. Cross check at your end. We actually don't know which process you are following!
I have a YU5510A running Quarkos and YU5010A running AOSP Extended. I also flash a lot of custom Roms but never get any issue.
did you find any solution for this i can only access cyanogen recovery and fastboot mode .
harshgoswami said:
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Click to expand...
Click to collapse
duskyrahul said:
did you find any solution for this i can only access cyanogen recovery and fastboot mode .
Click to expand...
Click to collapse
Flash stock ROM using fastboot
For yu5010a you got fastboot package
Open flash all.bat
Just remove device code
02x1ebf or anything I don't remember what it was.
Remove it from all lines
Save flash all.bat
Run it
---------- Post added at 01:29 PM ---------- Previous post was at 01:26 PM ----------
duskyrahul said:
did you find any solution for this i can only access cyanogen recovery and fastboot mode .
Click to expand...
Click to collapse
Flash stock ROM using fastboot
For yu5010a you got fastboot package
Open flash all.bat
Just remove device code
02x1ebf or anything I don't remember what it was.
Remove it from all lines
Save flash all.bat
Run it
For 5510a
Download ygdp 5.0
Select developer option
Select CBP file
Wait for tool extract it
Now minimize tool
Go to folder
Ygdp 5.0
You find here downfiles folder
Copy it and paste in c:\
Run flash all.bat
Done
---------- Post added at 01:35 PM ---------- Previous post was at 01:29 PM ----------
If any one got error in mounting using twrp
Just follow steps
Goto wipe -> advance wipe-> format data->
Type yes
Wait for process completion
Now reboot twrp to recovery
You see everything is mounted successfully.
Note :- with this step you format everything from your phone so don't reboot to system
Now connect phone with pc and copy any downloaded custom ROM in external SD
Flash it
Enjoy