Hard Keys Not Working
So, I searched and searched, but couldn't find anything that addressed my issue, so here goes...
Yesterday out of nowhere, the hard keys on my ATT Fuze just stopped working (Home, back, call, and hang up). Also, when I press my volume rocker it not only causes the volume screen to fluctuate wildly and not really do anything (but make lots of noise), it also makes the battery screen and the camera program open...
I've done a hard reset, a soft reset, and I have reflashed my old ROM (RRE21725 V3) and just flashed a new ROM (RRE21725 V5). Doesn't matter what I do, the hard keys still won't work and every time I reboot, the volume window opens and flashes a lot, the camera program opens, and the battery page pops up.
I'm going crazy and am finding my phone a bit unusable.
This hasn't happened up until late yesterday. I've never dropped my phone or gotten it wet. I just purchased it back in March.
Help, if anyone can.
hello, sound like the phone itself, i sent mine back about 3 weeks ago, same problem. you can try and flash the att rom, new one is posted on htc's web site and see if that works.
lupe
Installed anything recently?
have you tried a reset (soft/hard)?
Put a new screen protector on recently? (might be activating screen elements.)
Hi guys,
My girlfriend has a galaxy s6 running marshmallow. The soft keys are constantly flashing/blinking whenever the screen is turned on. This also causes the device to lag, draining the battery.
I've tried factory resetting the device, and running it in safe mode suggesting it's not software related.
I also installed the the app "Galaxy button lights" that allows the control of the lights, this does stop them flashing, but the device still seems to be running slowly.
Thanks for any advice in advance.
Hi did you find a solution to this as I am having the same problem. Power mode on stops the constant flashing but the phone still lags and it flashes when I charge my phone. My power button also phantom presses :/
I have the same problem. Did you find a solution?
Me too. Turning off the buttons seems to help... it drives me less crazy... but it still feels like there is screen lag. I think this started after I installed the last system update.
One of my co-workers suggested that it may be caused by moisture inside the phone. I set it in the sun for a while, and the problem seems to have gone away.
nhusby said:
One of my co-workers suggested that it may be caused by moisture inside the phone. I set it in the sun for a while, and the problem seems to have gone away.
Click to expand...
Click to collapse
This happened to me like 4 months ago, it hasn't "dried" till now However if i press hard on the lower left bezel - next to the app switcher button my phone works. I have a theory that the contact has become loose under the phone or so?
Hi, I have the same problem for a long time I installed a couple of firmware and the same thing on the factory software always happens, now I use custom rom and it works without problems, it means only on the factory versions I have a problem
Hey guys,
strange and frustrating problem. I was using my phone pretty extensively today (although nothing crazy), mostly thanks to Pokemon Go. Tonight after using my phone normally, I went to press the power button to turn the screen off and nothing happened. I was able to reboot (by changing one of the long-press actions to bring up the power menu via GravityBox) and then was unable to power on the phone. It seems like my hardware power button has suddenly become unresponsive. This leaves me unable to power on/off the phone, including booting into the bootloader. Also, I seem to be unable to wake my phone up by double tapping the screen or swiping up.
The phone otherwise functions fine. If I get a notification, the screen wakes up and I can use the phone. Otherwise, the only way I've been able to get into the phone is by connecting it to a computer and issuing ADB commands. The IR blaster functions fine which makes me think it's not the hardware button?
Has this happened to anyone else before? Can the power button just break like that without any water / physical damage? The fact that I also can't wake the screen makes me think it's a software issue. One other thing I suspect is that my phone abruptly died yesterday (battery died despite software thinking it still had juice left). In the past, with the modified kernel / rom, this has resulted in some nasty issues, including 4G not working and the Android system process basically exploding. I thought I lucked out when I powered it on after that, but maybe it just took a day for this issue to manifest itself.
I'm going to make a NANDROID backup and try flashing a few different things to see if I can fix it. I'll post my progress here.
Current build:
- Verizon M8, S-OFF
- TWRP
- Android GPE 6.0 (MRA58K.H13)
Edit: I haven't been able to find a fix. I'm a bit afraid to try a full RUU since I can't use the hardware keys to reboot into the bootloader should something go wrong. It may just be that my PWR hardware button is f'd which really sucks. I'm not sure I'm up to cracking open the phone to fix it. In the meantime I downloaded an app called Gravity Screen On/Off which uses the phone's proximity sensor to wake the screen up and it seems to work ok for now.
My z-flip3 5g has a strange problem. If i close it (by folding the screen closed), then after opening (unfolding) the screen and touching the right side button/fingerprint reader to unlock it, i hear the quiet "click" noise that indicates the phone is unlocked, but the screen stays black. i then have to repeatedly push the lock button on the right to lock the phone again and unlock it again. after several attempts the screen finally turns on. sometimes it will go black a few seconds later and the same issue continues. but other times the screen will stay on and work fine.
i have noticed that if i do not close the phone (folding the screen together) then i do NOT encounter this issue. the phone screen turns on when pushing the right side button (or touching the fingerprint sensor) and everything works fine.
this issue started yesterday, a system update installed yesterday as well, could it be related?
i already restarted many times, booted into recovery mode and wiped the cache. nothing has helped. the only way to avoid the problem is by not closing (folding the screen shut) the phone.
One UI v 5.1
Android 13
Security patch level Feb 1, 2023
fully stock/not rooted
I have same behavior. Did you solve this problem?
Unfortunately no. Did a factory reset, hoping that would help, but the issue persists
Mine has recently started doing the same. Last update was right before this started several weeks ago. I don't have mine set to require fingerprint, it should just turn on after opening. If I open it partway, it will turn on, then turn back off when fully opened.
hi,
i have same problem, it's software problem?
Not completely sure about that. They update this thing so often, it could be coincedence that it started shortly after an update. I want to try blowing out the hinges as I've got some dust under there that I hear when opening the phone. Definitely not a phone to put in your pocket after working in the wood shop!
Digital Dragon said:
Not completely sure about that. They update this thing so often, it could be coincedence that it started shortly after an update. I want to try blowing out the hinges as I've got some dust under there that I hear when opening the phone. Definitely not a phone to put in your pocket after working in the wood shop!
Click to expand...
Click to collapse
and don´t take it to the beach either!
What is also strange is that when I close the phone and open it a few seconds later, there is no issues whatsoever. However, if I leave it closed a few minutes, then when opening it, the problems with the screen staying off happen.
Yes, definitely don't take it to the beach!
@netridah , mine is doing exactly that. Which makes me wonder is it a wake issue, or a mechanical/sensor issue with the hinge.
one more to the bill
I checked the flexes and I warmed up the logic nothing works
I have the same issue: Flip 3 - 5G with OneUI 5.1 - 1 April Patch level
When I open the phone I eventually see for less than one second the lock screen, the goes black and unresponsive.
Then I have to press the button to turn the screen off (even if it is already) and then re-press the button or use the fingerprint to turn it on and it will work (eventually, sometime I have to do it a couple of times).
I already googled it on many forums but no solutions, I've tried to:
Disable the always-on display - no result, at first looked like it did the trick but the day after was having the same issue.
Check all the updates of the system components like always on-on display (settings --> lock screen --> always on display --> info), no help everything is up to date.
Hi,
I have the exact same problem, only difference is that I'm on the z flip 4.
I get the black screen and sometimes when opening or closing the phone the screen can flash in a bright yellow or green color.
I got a motherboard but the problem continued
Next step changing screen is very expensive at the moment
This is driving me crazy - also started the day I updated to OneUI 5.1.
Hoping for a solution soon!
I am also encountering this problem, I went to samsung repair shop 1 month out of warranty, sales person said it is a screen issue and needs to be replaced for 430$. Mine was before the update, i took mine near the pool, got wet maybe, as the alarm for usb charging mentioned unplug it immediately, day after it began randomly dark when phone is openned fully. Zflip 3
Oh just an update, i did some tinkering today, Good lock all updated, disabled clockface, sprayed some contact cleaner on power button, and hinges, fold close and open for a minute or two, fell asleep for 1 hour, and when I woke up, my screen works back to normal, it wakes up when unfolded, no more waiting or hitting the power button several times. hope this stays like this.
piper_indebt said:
Oh just an update, i did some tinkering today, Good lock all updated, disabled clockface, sprayed some contact cleaner on power button, and hinges, fold close and open for a minute or two, fell asleep for 1 hour, and when I woke up, my screen works back to normal, it wakes up when unfolded, no more waiting or hitting the power button several times. hope this stays like this.
Click to expand...
Click to collapse
How to disable the clockface? what would that contact cleaner be?
thanks
firstchris said:
How to disable the clockface? what would that contact cleaner be?
thanks
Click to expand...
Click to collapse
Hi, few days now, I still have occasional blacking out, I've tried putting my phone on safe mode, and this seems to solve the problem. I suspect it may not be hardware fault, but 3rd party software, "good lock" or something else that conflicts wit one ui, that makes the flipping open lag waking up. Contact cleaner used for electrical stuff
Didnt use my z3 for about a week let the battery drain.. then charged it too 100% without turning on the phone.. my phone back to normal now.. hope it works for you guys
Hello,
I am using Z Flip 4 and last night I started having this problem as well. I can confirm 100% that my phone has no hardware nor a history of impact of any sort that's why it's really frustrating having this kind of problem.
Has anyone already found a resolution for this problem?
Z flip 4 here also. Had the same problem with the screen. Took the phone to Samsung and they changed the screen, frame and back panel's for free under warranty.
They said it's a hardware issue.
So better to take the phone to Samsung.