Related
Following various threads here how to successfully unlocking and rooting their device, I've failed on so many levels.
At the moment I think my xoom is semi-bricked because its just stuck on the M screen. I've think I got the recovery screen working last night as I was able to go into recover mode but after updates through wifi I think it possibly stopped it.
So when i reboot and go into recovery mode, I get an exclamation mark over an android. I've tried rebooting and just got it to mount back on Fastboot but when I've tried to wipe it and reflesh it to (recovery-Tiamat-R4c-100611-1150-cwm.img) its not doing what its suppose to do and giving me "unknown partition, Failed to process command error (0x300003)
Any ideas what I need to do?
Btw, I can reboot, voldown and then volup to choose the 3 options but like I said I can't get into the recovery mode properly.
Schizophonic said:
Following various threads here how to successfully unlocking and rooting their device, I've failed on so many levels.
At the moment I think my xoom is semi-bricked because its just stuck on the M screen. I've think I got the recovery screen working last night as I was able to go into recover mode but after updates through wifi I think it possibly stopped it.
So when i reboot and go into recovery mode, I get an exclamation mark over an android. I've tried rebooting and just got it to mount back on Fastboot but when I've tried to wipe it and reflesh it to (recovery-Tiamat-R4c-100611-1150-cwm.img) its not doing what its suppose to do and giving me "unknown partition, Failed to process command error (0x300003)
Any ideas what I need to do?
Btw, I can reboot, voldown and then volup to choose the 3 options but like I said I can't get into the recovery mode properly.
Click to expand...
Click to collapse
Could I ask what steps in rooting you completed successfully and where exactly it went wrong?
Then, what exactly have you done to try to move forward?
Also, which guide did you use?
Don't worry, you're not bricked if you can get to fastboot.
okantomi said:
Could I ask what steps in rooting you completed successfully and where exactly it went wrong?
Then, what exactly have you done to try to move forward?
Also, which guide did you use?
Don't worry, you're not bricked if you can get to fastboot.
Click to expand...
Click to collapse
Last night I followed this videolinked in http://www.youtube.com/watch?v=OYc1lVWm7ks to Unlock OEM my device
I think that worked fine because it didn't throw up any hiccups.
I then followed this http://forum.xda-developers.com/showthread.php?t=1242241 to root it. It didn't have superuser so I downloaded it and installed it and then tried Terminal on the "SU" command. Said I did not have 'permissions'
This morning, I then followed this Youtbue link http://www.youtube.com/watch?v=ZsVpY0PDwtQ and after the first reboot of puting the new .img, it failed to reboot. Now I'm stuck on the M screen.
I think I managed to get my computer to pick up the device in adb fastboot because it responds to that. However when I type in adb devices it doesn't pick up anything...
Next after messing around I managed to flash it to the boot.img on this, http://forum.xda-developers.com/showthread.php?t=1049901
It flashed it ( I think) and worked without errors unlike the other flash I tried today, and its still stuck in M screen.
BTW, this is a UK Wifi Zoom.
Little update - I've downloaded and flash this boot: boot_3.1_insecure.zip from http://forum.xda-developers.com/showthread.php?t=1049901 and now boots up. However my Wifi has now disappeared. I'm in the process of doing a factory reset but will this work?
Still no avail - need to get this wifi working again soon. Think I've finally got access to superuser
Schizophonic said:
Little update - I've downloaded and flash this boot: boot_3.1_insecure.zip from http://forum.xda-developers.com/showthread.php?t=1049901 and now boots up. However my Wifi has now disappeared. I'm in the process of doing a factory reset but will this work?
Still no avail - need to get this wifi working again soon. Think I've finally got access to superuser
Click to expand...
Click to collapse
It sounds like you are on the right track. Hang in there, you'll make it!
Do you have access to an Ubuntu OS? when you connect an android device to a PC running Ubuntu it will mount the internal memory to the PC which makes it much easier to browse the partitions. Also, Go ahead and reflash the CWM recovery through Rom manager (if thats available to UK users) so that hopefully youll get a fresh recovery.img to work with. As far as ADB not noticing the xoom, you probably erased the adb drivers, and is the usb cord youre using 100% data transferable type? I about pulled my hair out a few times because adb wouldnt recognize my phone but realised I was using an older micro usb cable that only allowed electrical current for charging, not data transfer capable. You might also be able to find a clean nandroid backup file from a fellow UK xoom owner, that you trust, and see if they dont mind sending you their backed up boot-img and system-img. Just some guesses, but sounds like you got it pretty well figured out
Hello all, after a bit of self taught ADB and etc and understanding the mechanics how to successfully flash a Xoom, I managed to follow another guide from stratch (unlock oem, etc) and flashes it to the US stock 3.2.2 rom. It picked up wifi but couldn't connect for some reason - maybe different frequency?
Anyway since then I've installed one of the custom Roms here Team Tiamat Xoom Rom 2.2.2 and all is well now Got my Xoom back up and running with superaccess.
Thanks for all the info on this forum, great place for resource
Mind you, coming from a background with no experience with ADB, it was a bit mind boggling but I managed to get there in the end. Just a bit of feedback for those authors with the guides - maybe put a little subsection on the basics of how to get things prepared and up and running. This I think will help a lot of people who cannot sit for hours on end to trouble shoot something if it goes wrong. Most of the guides here are very useful and handy but at time I just kept saying to myself "wtf, what, where, huh?"
Schizophonic said:
Hello all, after a bit of self taught ADB and etc and understanding the mechanics how to successfully flash a Xoom, I managed to follow another guide from stratch (unlock oem, etc) and flashes it to the US stock 3.2.2 rom. It picked up wifi but couldn't connect for some reason - maybe different frequency?
Anyway since then I've installed one of the custom Roms here Team Tiamat Xoom Rom 2.2.2 and all is well now Got my Xoom back up and running with superaccess.
Thanks for all the info on this forum, great place for resource
Mind you, coming from a background with no experience with ADB, it was a bit mind boggling but I managed to get there in the end. Just a bit of feedback for those authors with the guides - maybe put a little subsection on the basics of how to get things prepared and up and running. This I think will help a lot of people who cannot sit for hours on end to trouble shoot something if it goes wrong. Most of the guides here are very useful and handy but at time I just kept saying to myself "wtf, what, where, huh?"
Click to expand...
Click to collapse
My guide, which is highlighted in the Xoom Heaven thread has a large section on setting up your adb files etc.
http://forum.xda-developers.com/showthread.php?t=1249798
Rooted 3.2 Xoom FAIL
Hi All,
Not the best way to join the boards but I am in deep....
I have a canadian wifi xoom on 3.2. I followed these instructions (How to root 3.2 on US WiFi & Verizon 3G XOOM! (Windows and Mac)) to root my xoom and was having issues with a wifi error.
I decided to use the Canadian boot.img file and when I rebooted the xoom got stuck on the moto logo and is no longer recognized by my computer.
I have tried resetting through the android recovery (I dont have anything 3rd party installed) but no luck. I am afraid that this thing is a total write off.
Any thoughts? Thanks
Blair
Ok, I've been reading around the forum for about a week, trying to solve a problem with an original moto g (falcon). Basically my cousin got the moto g a few years back, and I, in my ignorance, tried to root the device for him. What I can remember was oem unlocking the bootloader with Motorola's unlock code through their website and adb. then my cousin freaked about the warranty warning on the boot animation, and decided against it. So cut to now, I'm a little more experienced, the phone's years old now, and he'd like to refresh it with a new rom, which I suggested, trying to help him. So forgetting what I'd originally done those years ago, I started the process of rooting the phone, installing a custom recovery, to hopefully put a lighter rom on it for him.
OK so it's a UK Retail on tesco mobile, moto g xt1032 running Android 5.1.
in bootloader menu it says "Device Locked status 2", dunno what this is in relation to.
first I checked the bootloader was still unlocked, and adb said it was. so I tried to use CF-autoroot to finish the job, but there was issues. it restarted the phone into fastboot mode, but when the script started, pc end did nothing, on the phone it said, "flashing unlock" and just sat there for 10-15mins doing nothing (i left it the time, just incase it was doing it).
So i read a little more, and found because i'd already unlocked the bootloader, I could just flash a custom recovery and root from adb? so I downloaded the latest twrp and tried. I was unable to do so. it said the partition wasn't the right size? should have documented it, but really didn't expect to run into any problems.
So I restarted and tried to do my usual fallback, and flash the factory image and start again, But couldn't find a source for the specific img, and tried to keep fighting on.
So I noticed that the phone wouldn't respond to adb or fastboot once in fastboot mode, when in android with usb debugging, no problems, in fastboot, didn't show up as adb devices?
I tried booting into the recovery from the bootloader menu, and got a no command. So there isn't a recovery, and I can't flash a new one? if i could find the stock recovery, I would try that.
so apart from deleting all his apps and settings, I hadn't solved the problem at all, and had to leave the job there as I couldn't find a solution.
I know this isn't the most detailed, but I've done this with quiet a few phones now, and felt I was pretty competent. I see everyday as an excuse to learn more, and like to think I have humility. So, I'm assuming I did something those years ago to damage the recovery? I'm running out of ideas, and was hoping someone could point me in the right direction?
I've lurked on xda for years, and learned so much about this kind of thing through my past experiences, but I'm stumped this time, and feel obliged to resolve the problem, as it was me who caused it.
TL DR
Can't flash recovery, no command when I try to open recovery, trying to either factory image back, or root/custom recovery it.
any insight would be much appreciated.
Hi. I just rooted and installed CM13 on an old XT1034 about two days ago. I am also sort of a ROM noob, I have ROMed a few devices, but usually but following strict step by step guides I have found here on XDA. Over the years I have some minor understanding of the process now.
I also got the "No command screen" when trying to get into TWRP recovery. The issue seems to be that if you reboot via ADB and the ROM launches it will automatically rewrite the recovery to the stock one, and when you try to go to recovery from fastboot, it gives you the "no command" error. Apparently you can get to the stock recovery from there by a hardware key combo, something like holding up vol for 10 sec then a quick press of power (I can't remeber the exact key sequence or what forum I read it in). If it does this you have to reflash TWRP again. This issue is mentioned here (http://wiki.cyanogenmod.org/w/Install_CM_for_falcon) in step 8 about installing recovery. What I ended up doing was after the flash of TWRP via ADB, I manually powered down, then manually bood into fastboot by holding volume down and power, and selecting recovery. This was a bit fiddly and I had to attempt it a few times but eventually it worked and TWRP installed.
The issue with the phone not being recognized may be due to incorrect drivers. I had no issue with this because I installed the official driver package from Motorola. It is available in their website in the developer section. I don't have the URL right now.
Hopefully this helps, for me CM13 Official has been an a stable fresh start for this old device.
Hi all,
I've hit a dead end and am hoping someone can point me in the right direction.
I have a Verizon Xperia Z2 tablet that had been a Verizon store demo (fully functional). I rooted it with KingRoot to get all the Verizon crap off (I only use it as WiFi anyway), upgraded it to stock Android 5.1.1, used Super-Sume to get rid of KingRoot and set it up with my apps.
Everything was fine until the other day, when I put an SD card in, installed Apps2SD, opened the app for the first time and it said it could not gain root access. So I ran Root Checker and it confirmed that the tablet was no longer rooted.
I then closed everything and tried to reboot it, which was definitely a mistake, because ever since then, the farthest I can get is the Verizon boot screen. I can get to TWRP, but my backup does not appear there. Factory Wipe does not have any effect.
I did try to use FlashTool to get the FTF I put on there back. The log spat out an error message that USB debugging might not be switched on (it had been) and then gives me the message "Upgrading, do not disconnect device from PC. SOftware Status: Modified". It then reboots and goes to the Verizon boot screen, where it stays forever.
I think I've read every Xperia thread I can find and can't get past where I am. Can anyone point me in the right direction?
Any help is greatly appreciated!
wcs2 said:
Hi all,
I've hit a dead end and am hoping someone can point me in the right direction.
I have a Verizon Xperia Z2 tablet that had been a Verizon store demo (fully functional). I rooted it with KingRoot to get all the Verizon crap off (I only use it as WiFi anyway), upgraded it to stock Android 5.1.1, used Super-Sume to get rid of KingRoot and set it up with my apps.
Everything was fine until the other day, when I put an SD card in, installed Apps2SD, opened the app for the first time and it said it could not gain root access. So I ran Root Checker and it confirmed that the tablet was no longer rooted.
I then closed everything and tried to reboot it, which was definitely a mistake, because ever since then, the farthest I can get is the Verizon boot screen. I can get to TWRP, but my backup does not appear there. Factory Wipe does not have any effect.
I did try to use FlashTool to get the FTF I put on there back. The log spat out an error message that USB debugging might not be switched on (it had been) and then gives me the message "Upgrading, do not disconnect device from PC. SOftware Status: Modified". It then reboots and goes to the Verizon boot screen, where it stays forever.
I think I've read every Xperia thread I can find and can't get past where I am. Can anyone point me in the right direction?
Any help is greatly appreciated!
Click to expand...
Click to collapse
Greetings and welcome to assist. It sounds like your sytem partition may have got corrupted or the pit file. Can you install another rom through twrp and can twrp file manager see any of your system files when mounted ? The only way to tell what is really going on is to adb a logcat while the phone is bootlooping if that is possible
Good Luck
Sawdoctor
Thanks! I'm not sure what other rom would work for the Z2 tablet. From what I've read, only stock roms work. But if there's something else you recommend, please let me know.
When I try copying the log to the SD card, it does tell me that SELinux support is present and I can read the log when I connect the tablet to my computer. When I go to File Manager, I can see some files, but the system and system/bin folders are empty.
I can sideload ADB if I understand you correctly. What would the next step be?
Thanks again, I really appreciate the help.
Hello. I've never bothered trying to root a phone before, but getting tired of the forceware apps being a buggy PITA you can't even disable/remove, so thought it was time to root for more control.
However, there are so many old posts, old tut videos, updates to software that might be superseded by newer software by the time you get to the last page, etc. that I'm not actually sure what's what or where to start, so figured I'd ask and hopefully get accurate info from you guys/gals that are more in the loop on the most current methods using the latest software.
Phone in question seems to be a 2015 J700PVPU2BQJ2 software version w/ J700P.03 version hardware updated to 7.1.1 and it's through Virgin. I ONLY want to root the phone, and nothing more, while trying to keep the phone as close to factory image as possible., and prefer using a PC to do it. Thought Auto-Root might be way, but it looks like it's not in use anymore?
Again, I'm new to phone rooting and the lingo, so treat me with kid gloves, thank you.
J727P
Nupid Stoob said:
Hello. I've never bothered trying to root a phone before, but getting tired of the forceware apps being a buggy PITA you can't even disable/remove, so thought it was time to root for more control.
However, there are so many old posts, old tut videos, updates to software that might be superseded by newer software by the time you get to the last page, etc. that I'm not actually sure what's what or where to start, so figured I'd ask and hopefully get accurate info from you guys/gals that are more in the loop on the most current methods using the latest software.
Phone in question seems to be a 2015 J700PVPU2BQJ2 software version w/ J700P.03 version hardware updated to 7.1.1 and it's through Virgin. I ONLY want to root the phone, and nothing more, while trying to keep the phone as close to factory image as possible., and prefer using a PC to do it. Thought Auto-Root might be way, but it looks like it's not in use anymore?
Again, I'm new to phone rooting and the lingo, so treat me with kid gloves, thank you.
Click to expand...
Click to collapse
ok you have an older phone the J700P you can start by downloading odin an twrp recovery an superSU zip you can get twrp from here !https://twrp.me/devices/samsunggalaxyj72015qcomsprint.html
an odin from here
https://mega.nz/#!nYVDXBAC!_cTWbW4_Ow8sZMWcZvO7bVwEEBFlD1DQsB5NeFhj1EY
An just google latest superSU zip to find that !
good luck !
step 1 enable oem in development settings !
step 2 put phone into download mod an flash twrp then boot into twrp recovery an flash superSU zip !
Thank you for the info. I'm presently confused. Here's what I've done:
I ran Odin and flashed with twrp-3.2.1-0-j7ltespr.img.tar. It went through successfully going off odin's message.
Vol. up + home + power. It'll eventually show a yellow triangle with the white trash can guy on it's side stating "No Command". Power + up gets the Android Recovery screen.
At this point, am I supposed to choose the Wipe Data/factory reset option? I see tuts that seem suggest I should already be in the twrp UI or something. I've tried watching vids and looking at a handful of tuts, but either they are the wrong phone, too old, the button combos show something else entirely, etc.
Thanks!
Anyone? Videos show the buttons vol. up + home + power as booting right into twrp recovery gui. For me, it's going into "Android Recovery" screen. Is there an extra step with Odin or something that I missed? Or am I supposed to wipe/boot in the Android Recovery screen and it'll boot the twrp recovery gui? If bricking something I'm not familiar with wasn't a concern, I'd be courageous with it.
I tried the twrp-3.1.1-2-j7ltespr.img.tar and same thing. Odin says it's a success. Phone boots up to normal phone screen. Videos show the person's phone booting right into Twrp recovery. Mine acts like nothing changed. Root checker says unrooted. The Twrp app says unrooted. OEM Unlock and Debugging options in phone are selected, and I have it set for manual updates.
Anyone have an idea what's going on here?
J700P
Nupid Stoob said:
I tried the twrp-3.1.1-2-j7ltespr.img.tar and same thing. Odin says it's a success. Phone boots up to normal phone screen. Videos show the person's phone booting right into Twrp recovery. Mine acts like nothing changed. Root checker says unrooted. The Twrp app says unrooted. OEM Unlock and Debugging options in phone are selected, and I have it set for manual updates.
Anyone have an idea what's going on here?
Click to expand...
Click to collapse
Ok when flashing twrp with Odin first uncheck auto reboot in options flash twrp pull battery replace battery an boot into twrp an flash superSU zip then reboot system !
Thank you so much Peter! That did the trick THANK YOU :good:
For posterity to anyone else w/limited root knowledge with a SM-J700P Virgin variant running 7.1.1 (and what was most recent factory updates until this point); Flashed the twrp-3.2.1-0-j7ltespr.img.tar again w/o auto reboot in options of Odin, pulled battery once safe (i.e. you get the "Pass" message from Odin confirming everything went as planned) to get out of the downloading screen, replaced battery, booted the recovery (vol up + power + home) and it finally booted into the twrp recovery gui. Selected the "Install" option, then went to where the supersu.zip was stored on the SD (I created a separate "supersu" folder via PC connection for easy locating; internal phone memory card looks to now be unlocked, so can most likely use that if you don't have a SD card). Checked the "reboot once installed option" in the gui box and swiped to install supersu,zip and verified it was rooted via app after phone fully booted back up.
BTW, If anyone gets a hang/crash in Odin immediately after trying to select a twrp tar image in the "AP" box, try downloading the twrp image via PC instead of the through the phone (the legit twrp site that has the repository of past/current .tar), and just put it somewhere like Odin folder on desktop. Somehow, mine were getting corrupted via phone download through the twrp app, and Odin would NOT recognize the file was bad/corrupt when trying to select it via the AP box and hangs instead of giving a warning message. I ran into this earlier on then noticed the file was too small for some reason after viewing it on my PC, hence the Odin hang that needed a task manager kill.
I hate to necro an old thread but I still do not want to create an entire new topic for a single question. If I was to follow this info will it wipe the phone or will it simply root it while keeping all data on the phone? I ask as it is my wife's old phone and she would be pissed if I wiped her apps and everything on accident since she wont be able to remember what she had.
Edit: also when I add the TWRP file to odin it immediately hang/crashes like OP mentions but I am already DLing via pc. any thoughts?
I got a few Problems, at first i tried to unlock the bootloader, after a while i got that, bootloader unlocked.
Then i tried to root my Moto G7 Power, with bad results... Tried to install TWRP with the fastboot commands etc. I got into TWRP but couldnt install it permanent, tried it in different ways but nothing worked. After hours of testing my phone decided to stop working and it bricked.
I can get into fastboot mode, but every time ill try to start it the screen with "Your device has been unlocked and can`t be trusted." shows up, then it goes off and the same screen comes back again, tried to get ride of that but with no results.... Can anybody help me with that?
Second thing: How the hell did i install TWRP permanent on my phone??
I had to do the Thing with the img again and again to get in, tried to push the zip to my internal storage and install it from there, the red warning "Failed to mount system root" showed up...
Its my first phone im trying to root since years, and my knowledge and english is pretty bad^^
Thanks for your answers
Gousch said:
I got a few Problems, at first i tried to unlock the bootloader, after a while i got that, bootloader unlocked.
Then i tried to root my Moto G7 Power, with bad results... Tried to install TWRP with the fastboot commands etc. I got into TWRP but couldnt install it permanent, tried it in different ways but nothing worked. After hours of testing my phone decided to stop working and it bricked.
I can get into fastboot mode, but every time ill try to start it the screen with "Your device has been unlocked and can`t be trusted." shows up, then it goes off and the same screen comes back again, tried to get ride of that but with no results.... Can anybody help me with that?
Second thing: How the hell did i install TWRP permanent on my phone??
I had to do the Thing with the img again and again to get in, tried to push the zip to my internal storage and install it from there, the red warning "Failed to mount system root" showed up...
Its my first phone im trying to root since years, and my knowledge and english is pretty bad^^
Thanks for your answers
Click to expand...
Click to collapse
Go to the Moto g7 power suport group in tellagram there is some people that can help