After installing the CM 12.1 ROM on xperia L, photos taken by the camera app, both Google's and cyanogenmod, just disappear after a few days or minutes after taking them. I cannot find them on either the sd card or phone memory. Phone internal memory is full with only the OS and gapps package. Also torch doesn't switch off once on. Please help.
XDA Visitor said:
After installing the CM 12.1 ROM on xperia L, photos taken by the camera app, both Google's and cyanogenmod, just disappear after a few days or minutes after taking them. I cannot find them on either the sd card or phone memory. Phone internal memory is full with only the OS and gapps package. Also torch doesn't switch off once on. Please help.
Click to expand...
Click to collapse
Hello, and welcome to XDA! Did you flash it from an XDA thread? In which case, the best thing to do is ask directly in that thread. Alternatively, you can try flashing CM12.1 from an XDA thread. You will find a build here: http://forum.xda-developers.com/xperia-l/development and a beta build here: http://forum.xda-developers.com/xperia-l/orig-development
Good luck!
Related
[Q&A] [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014
Q&A for [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Port][4.4.4][A2EPT][Unofficial]~{LiquidSmooth v3.2}~Updated 11/07/2014. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i need help
Az-one786 said:
here you go... http://forum.xda-developers.com/showthread.php?t=2397942
you can choose between micro/nano/pico
Click to expand...
Click to collapse
hi guys
iam new in rooting world
I have atrix 2
I have rooted it
and now I want to install a rom on it
but I don't know how to start
please help me :'(
mohammad jarrah said:
hi guys
iam new in rooting world
I have atrix 2
I have rooted it
and now I want to install a rom on it
but I don't know how to start
please help me :'(
Click to expand...
Click to collapse
I think u should put your questions here http://forum.xda-developers.com/showthread.php?t=1877166
This topic is only for LiquidSmooth questions
About your question: Install BMM and do partition stuffs then you will be able to install 4 more custom ROMs on your phone :fingers-crossed:
But first, read this great tutorial (including videos)
http://forum.xda-developers.com/showthread.php?t=2602229
System 6 Error when loading Nano/mini Gapps on LS v32 Atrix2
I got brave today, after much reading on the forums and watching Tech ArnY rooting videos and BMM 0.3.4 - Great information.
Here are the steps that I took today and their results:
1.) Rooted the Atrix 2 MB865 (AT&T) that has OTA ICS 4.0.4 ROM. Rooting was successful,
2.) Post install of MBB 0.3.4 and SuperUser, I kept the ICS 4.0.4 ROM on System 1 of the phone.
3.) Next, following Tech Arn Y's teaching, I was able to successfully flash LiquidSmooth (AcePort-LS-KK-Milestone-3.2-edison.zip) onto System 3 post wipe clean /dalvik, et cetera and successful install.
4.) So far, so good. Next I attempted to load GAPPS from this link (http://forum.xda-developers.com/showthread.php?t=2397942). Again, post check of MD5 check sum for both mini and nano GAPPS - no issues.
5.) While attempting to flash either the mini or nano GAPPS onto the Atrix 2 into System 3, it shows the following (E: Error in /ext/pa_gapps-modular-nano-4.4.4-20141121-signed.zip) (Status 6) Installation aborted.
6.) I can boot into either ROM without issues, however, even after a reflash of System 3 and again successful install of LS-KK-Miestone 3.2, GAPPS gives Status 6 install error.
Looking for clues in these forums, but I have not come across anything yet. Any/all help would be very much appreciated!
@Starrider17 I'm betting your gapps are too large for your partition size. Find the PA gapps thread and download the pico gapps then try again. If it fails again the PA gapps will generate a log and place it on your SD card to tell you why it failed.
1BadWolf said:
@Starrider17 I'm betting your gapps are too large for your partition size. Find the PA gapps thread and download the pico gapps then try again. If it fails again the PA gapps will generate a log and place it on your SD card to tell you why it failed.
Click to expand...
Click to collapse
Thanks 1BadWolf for the reply. At first, I thought that the size of the GAPPS was perhaps the issue, but it did not end up to be the case. After continuing my search in XDA Forums (a wealth of great information here without doubt!), I stumbled upon a video that explained Status 6 and Status 7 errors which are the most common when flashing GAPPS post ROM into any phone. In my case, here is the summary of the events:
1.) Flashed pa-gapps mini 4.4.4 (at 229 mbytes ) - Status 6 error.
2.) Wipe clean System 3 and then flashed pa-gapps-nano 4.4.4 (at 120 mbytes) 2x - Status 6 error.
3.) Being somewhat frustrated, and yet challenged, I took the clue for the status 6 error and by chance, I grabbed the Slim_mini-gapps 4.4.4 (at 65 mybtes) - Gapps successfully loaded!
4.) Wanting to confirm whether the issue lives in the size of the GAPPS - or - something in one of the scripts (Meta-INF > com > google > android > update-binary or update-script), I went ahead and did another Wipe-Clean and flashed Slim-normal-gapps 4.4.4 (at 183 mbytes) - Gapps successfully loaded
Summary: In business and in life, something a solution or a work-around is found and implemented without knowing the root cause!
Hopefully, the documenting of my journey here will be beneficial to someone down the road just as many of the posting in this forum have been (and continue to be) to me too!
I have installed this ROM on my Atrix 2.. Stable rom as mentioned.I just found one bug,i.e The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
I have installed this ROM on my Atrix 2.. Stable ROM as mentioned.I just found one bug, i.e. The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
Expecting a hope..
I have tried your liquidsmooth 4.4.4 ROM and it works great...! Will we expect a lolipop update any soon from your PORT..!?
_partha_ said:
I have installed this ROM on my Atrix 2.. Stable ROM as mentioned.I just found one bug, i.e. The microphone for sound recording,Google voice or Whatsapp recording doesn't work But during a call the microphone does work.Please find a solution for it.
Click to expand...
Click to collapse
parthapmc said:
I have tried your liquidsmooth 4.4.4 ROM and it works great...! Will we expect a lolipop update any soon from your PORT..!?
Click to expand...
Click to collapse
Hey guys, thanks for trying out my Liquidsmooth port and offering your feedback. Unfortunately, I'm no longer able to work on the existing ports or even lollipop since development has completely died down.
This is because our current recovery, BMM isn't able to boot any lollipop rom and it's the only working one we have. All developers and supporters have moved on pretty much, so all you can do is just play around with what's there. I'm still kinda around with my A2, but don't have the time to do anything anymore since I've moved onto a newer device, work, life, etc.
If you want someone to blame for this, firstly blame Motorola for the locked bootloader and then blame Google for making 5.0 have enforced SELinux which is why we can't boot any LP rom. Aside from that, this device is amazing to have and I hope you all have a wonderful time with it.
Sent from the Ace's MB865 using Tapatalk
I've seen all the threads in XDA developers forum, visited at least 10 different sites, watched 50 videos(at least), tried all the apps and flashed all the ROMs(which would support my device) and yet my camera app doesn't open properly.
The Stock camera app says "Can't Connect to the Camera", Cyanogen Camera 2.0.0.4 fails to start, other third-party camera apps fail too.
I've tried flashing camera patch ROMs and my phone says an error and aborts the installation.
I've tried almost everything. I think the ROMs I'm trying to flash don't actually support my Galaxy Y, even when they say.
So, does anyone know anything else to do? I really need the camera, pretty badly if you ask :/
Note that:
I used,
1) CWM Recovery 6.xxxx something
2) Bangprovn Kernel
3) cm-11-20140719-NIGHTLY-totoro.zip
4) Gapps 4.4 Ultra Stripped Masuele 02-02-14 .zip
another note: I think my GAPPS had some issues because it didn't have the Stock camera app in the appdrawer(but it was accessible via Gallery), the gallery app didn't work and I had to install Cyanogen Gallery and things like that.
I'm somewhat a newbie in Modding, so I use youtube, and the modding was successful, whereas the camera fix wasn't.
Thanks in advance
XDA Visitor said:
I've seen all the threads in XDA developers forum, visited at least 10 different sites, watched 50 videos(at least), tried all the apps and flashed all the ROMs(which would support my device) and yet my camera app doesn't open properly.
The Stock camera app says "Can't Connect to the Camera", Cyanogen Camera 2.0.0.4 fails to start, other third-party camera apps fail too.
I've tried flashing camera patch ROMs and my phone says an error and aborts the installation.
I've tried almost everything. I think the ROMs I'm trying to flash don't actually support my Galaxy Y, even when they say.
So, does anyone know anything else to do? I really need the camera, pretty badly if you ask :/
Note that:
I used,
1) CWM Recovery 6.xxxx something
2) Bangprovn Kernel
3) cm-11-20140719-NIGHTLY-totoro.zip
4) Gapps 4.4 Ultra Stripped Masuele 02-02-14 .zip
another note: I think my GAPPS had some issues because it didn't have the Stock camera app in the appdrawer(but it was accessible via Gallery), the gallery app didn't work and I had to install Cyanogen Gallery and things like that.
I'm somewhat a newbie in Modding, so I use youtube, and the modding was successful, whereas the camera fix wasn't.
Thanks in advance
Click to expand...
Click to collapse
Hello, and welcome to XDA!
This post may help (if it's more than advice for CM7)...
you need to use percys kernel and percys latest rc build
whitexp builds will have bugs that have been fixed in percys builds
Click to expand...
Click to collapse
The lack of camera in the app drawer means that the ROM was compiled without the proper support. Been there, done that. No wonder why gallery didn't act properly either.
I cannot find the CM11 you reference, but if you go back to stock and still cannot access camera, then you have a hardware issue.
Any other questions you have can go here:
> Legacy & Low Activity Devices > Samsung Galaxy Y GT-S5360 > Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubleshooting > [HELP THREAD]Ask Any Questions![GT-5360/5510/5512/6102]
Hope this helps, and good luck!
Hi guys,
I am using the latest build [ROM][UNOFFICIAL] CyanogenMod 12.1 [20160115]
My issue is the apps which I have already moved to SD card keeps moving to internal memory of the phone after updating them on the google play.
Any fix? Or is it only me?
Thank you!
Device: Asus Zenfone 2 - Z00AD -
CM Nightly Build: 13.0-20161219-Nightly-Z00A
Camera App: Asus Pixelmaster - CM Camera
My device is a Zenfone and is running with the last build of CM 13 released for it, although, the camera never worked properly before. Every time I try to take a pic, my device freezes and shut down the camera app. Is there any workaround avalaible to fix this annoying issue?
PS: Both apps are used without filters or in the manual mode.
XDA Visitor said:
Device: Asus Zenfone 2 - Z00AD -
CM Nightly Build: 13.0-20161219-Nightly-Z00A
Camera App: Asus Pixelmaster - CM Camera
My device is a Zenfone and is running with the last build of CM 13 released for it, although, the camera never worked properly before. Every time I try to take a pic, my device freezes and shut down the camera app. Is there any workaround avalaible to fix this annoying issue?
PS: Both apps are used without filters or in the manual mode.
Click to expand...
Click to collapse
Hello,
Firstly I would advice you to try Footej or Google Camera app from playstore.
Secondly, please post the issue in Zenfone 2 Cm13 thread with relevant logs, the developer might be able to assist you.
Also, you may register for XDA account to post and reply in the forums.
Regards
Vatsal,
Forum Moderator.
LineageOS By max127328
Instruction:
If you are using 3.4.67 kernel based custom rom
Flash lollipop 5.0 (use sp-flash tool) firstly
then flash this rom from Twrp
Description
Kernel Version 3.10.+
Android Version : 6.0.1
LineageOS is the successor to the popular CyanogenMod ROM. With an emphasis on openness, community development, and improvement of the stock Android experience, CyanogenMod supported dozens of devices officially with nightly updates, and unofficially, by the efforts of developers in the community, dozens more devices. LineageOS intends to pick up where CyanogenMod left off, but with a redoubled focus on being a grassroots community-focused development effort.
Click to expand...
Click to collapse
Changes
• New Security Patch
• Faster loading
• Change view of settings (UI changes)
• New boot animation
• patched youtube failure
screenshot
Thanks to
darklord4822 for his kernel
Virus25418 firmware Test
Download
Rom:here (*new)
Gapps :here
SuperSu:here
old
Rom :here
Click to expand...
Click to collapse
*Root is available @ settings-->developer menu
No Front Cam
How to fix this?
how to fix no front cam? everything works fine except front cam.
renren28 said:
how to fix no front cam? everything works fine except front cam.
Click to expand...
Click to collapse
this problem is currently under fixing,meantime you can use third-party camera apps.
rejul said:
this problem is currently under fixing,meantime you can use third-party camera apps.
Click to expand...
Click to collapse
What particular Camera app should I download? Because I already download camera apps but no Front Cam button on app. Thanks in advance.
renren28 said:
What particular Camera app should I download? Because I already download camera apps but no Front Cam button on app. Thanks in advance.
Click to expand...
Click to collapse
Sorry renren28,I had contacted the developer ,as it is core bug ,No solution is available for now atleast .As soon as fix is uploaded i will pm you.
rejul said:
Sorry renren,I had contacted the developer ,as it is core bug ,No solution is available for now atleast .As soon as fix is uploaded i will pm you.
Click to expand...
Click to collapse
Thanks. is this similar on CM13 bug, that you need to flash boot.img to fix front cam?
hello im about to install LineageOs to lenovo A536
is there anything new ?
Is there version 14.1 for this smartphone ? i checked somewhere but im not sure about that source
Mate the rooms is quite amazing..
But there are a few bugs
Camera
And when I open the dialer it reboots
Whenever I check for lineage os update it says check internet connection
Camera , microphone, torch, my files are not working and it is not showing my contact list of my sim
Plzzz told the solution plzzz....
Waiting for update. More Power to Developer of this ROM!
Link is dead, could you please reupload it somewhere else, for example on mega.nz?
Thanks
GoodMorning, some users has a working front cam using this ROM. I wonder how it works. I use their backup boot.IMG and flash it on my device. But still no luck.
Internal storage issues
After i flash my phone my internal storage cannot detected in any file manager plss help mee.
Google Drive:
Sorry. You do not have access to this document because it is inconsistent with our Terms of Service.
- Czech republic
Heya, guys!
I'm having a BIG problem.. I flashed LineageOS ROM through TWRP 3.0.2 recovery (my last ROM was on the 3.4.67 kernel) and now I lost my IMEI numbers. Could you please help me fix it? I installed all the drivers that are needed, but my PC still doesn't recognize the phone and FlashTool can't work either. I found some patches to flash through the recovery and restore it that way, but this didn't help too. I don't know what to do, because I need that phone and I can't fix it anyway. Thanks.
Link dead, please reupload
The link to the new rom is dead, please can you reupload it?