Updated 03.26.14 - Released v2.1 - bug fixes and code cleaned
Introduction:
I am by no means a developer. I am just an android enthusiast who has learned a bit of bash. The reason I made this script was that settings>>wifi>>advanced was not promptly turning wifi off when my device would sleep; sometimes it would not turn off at all. So I figured since I am making a script to resolve this issue I might as well add a couple of other functions as well. To this end I noticed some people saying THIS APP was helpful and I missed the Flush-O-Matic script from V6 SuperCharger so I added fstrim and drop_caches=3 to the script.
Click to expand...
Click to collapse
What will this do?
The script will allow you to sync wifi, fstrim, and/or drop_caches=3 with sleep and/or it will allow you to schedule fstrim and/or drop_caches=3 using crond. The scheduling option can work on either a hourly (you can choose to run desired programs every hour on the hour, every two hours on the hour, every 3 hours on the hour, etc) or daily basis (you can choose to run desired programs at a given time on the hour).
Both the sync and schedule options will load themselves in to memory each boot and each time your device goes to sleep and/or when scheduled the scripts will depending on your options: (1) sync your data so as to ensure no data is lost; (2) TRIM your /system, /data, and /cache partitions; (3) DROP CACHES = 3; and (4) turn off wifi.
In addition, there is also an on-the-fly script to manually trim partitions and drop caches when desired.
Click to expand...
Click to collapse
Benefits:
Reduce lag/improve i/o efficiency (see THIS and THIS).
Although android automatically invokes fstrim when certain conditions are met, these criteria could seldom if ever be met depending upon your usage style. The init.d script should ensure fstrim is invoked more frequently for most users.
Should use less ram than apps that perform similar functions (I say should because I have never used such apps, but I imagine they consume more that .2-.5 mb of ram).
Click to expand...
Click to collapse
Requirements:
root
init.d
busybox
fstrim (should be in all nexus 4.3+ roms)
Click to expand...
Click to collapse
Warning/Disclaimer:
Although these scripts function as intended on my device – Nexus 7 (2013), SlimKat (weekly), ElementalX...Use at your own risk. Neither I nor XDA are responsible for any possible deleterious effects.
Click to expand...
Click to collapse
Known Issues/Bugs:
If you use the sync option, scripts with a lower priority than Z99 will not execute.
The log files don't always display as intended...dunno why...any help/suggestions would be appreciated.
Let me know if you find any others .
Click to expand...
Click to collapse
Install, Usage/Verification, & Uninstall:
Install -
Note: If you use crond for other tasks, both the install and uninstall routine account for this potential contigency and should leave your other crond tasks uneffects.
make a nandroid backup
download the zip (<<NOT flashable) attached to this post
extract the zip’s contents
if you were/are using the first version of this script manually delete: /etc/init.d/07TrimDropOff, /data/TrimDropOff_Awake.log, and /data/TrimDropOff_Sleep.log
run TrimDropOffInstaller with superuser permission via terminal or script manager.
follow the scripts prompts
reboot
enjoy
Usage/Verification -
Assuming you have followed the install procedure, next, put your device to sleep and then wake it if you are using the sync option.
Now check the various logs in /data/TrimDropOff. The logs will show the time, the script’s PIDs, the path of the PIDs (just to double-check the PIDs are correct), the ram used by the PIDs, action(s) preformed (amount trimmed from each partition and/or if drop_cahes was run), or errors.
If you want verify manually via terminal do [pgrep -f TrimDrop] for the sync option or [pgrep crond] for the scheduling option to get the PIDs, do [cat /proc/PID/cmdline] for each PID to verify it truly belongs to Z99TrimDropOff or crond, and do [dumpsys meminfo | grep PID] for each PID to verify ram usage (this command will yield duplicates, which can be disregarded and may output undesired additional results, which can be filtered by looking through the results for the relevant PID).
To use the on-the-fly script to trim and/or drop as desired, in terminal do [su -c trimdrop].
Should you want to reconfigure your setup, uninstall before reinstalling to avoid potential issues.
Uninstall -
Note: If you use crond for other tasks, both the install and uninstall routine account for this potential contigency and should leave your other crond tasks uneffects.
Rerun TrimDropOffInstaller with superuser permission and use uninstall option at the beginning of the script.
Reboot and all will be back to as it was before.
Click to expand...
Click to collapse
To-Do List:
Make in to an AROMA package.
I don't know, you tell me .
Click to expand...
Click to collapse
Code:
#!/system/bin/sh
# This script was authored by Defiant07 @ xda. Feel free to use it as you see fit, but please give proper credits.
# Big thanks to zeppelinrox, dk_zero-cool, & gu5t3r @ xda for their contributions to portions of this script (see the code of my other script SwapItOn @ xda for detailed citations).
# Read Karl Marx.
input_error(){
echo "That is not a valid input...try again...bye ."
exit 69
}
mount_rw(){
mount -o remount,rw / 2>/dev/null
mount -o remount,rw rootfs 2>/dev/null
busybox mount -o remount,rw / 2>/dev/null
busybox mount -o remount,rw rootfs 2>/dev/null
mount -o remount,rw /system 2>/dev/null
busybox mount -o remount,rw /system 2>/dev/null
busybox mount -o remount,rw $(busybox mount | awk '/system /{print $1,$3}') 2>/dev/null
}
mount_ro(){
mount -o remount,ro / 2>/dev/null
mount -o remount,ro rootfs 2>/dev/null
busybox mount -o remount,ro / 2>/dev/null
busybox mount -o remount,ro rootfs 2>/dev/null
mount -o remount,ro /system 2>/dev/null
busybox mount -o remount,ro /system 2>/dev/null
busybox mount -o remount,ro $(busybox mount | awk '/system /{print $1,$3}') 2>/dev/null
}
clear
if [ ! "`busybox`" ]; then
echo "Missing busybox...try again...bye ."
exit 69
fi
id=$(id); id=${id#*=}; id=${id%%[\( ]*}
if [ "$id" = "0" ] || [ "$id" = "root" ]; then
echo "" 1>/dev/null
else
echo "Not running as root...try again...bye ."
exit 69
fi
if [ ! -d /etc/init.d ]; then
echo "Missing /etc/init.d...try again...bye ."
exit 69
fi
if [ ! "`grep -r fstrim /system/bin`" ] && [ ! "`grep -r fstrim /system/xbin`" ]; then
echo "Missing fstrim...try again...bye ."
exit 69
fi
echo "Do you want to install or uninstall TrimDropOff?"
echo "Note: If you are rerunning this script to"
echo "reconfigure your setup, uninstall first."
echo -n "Input (i)nstall or (u)ninstall: "
read install_uninstall
echo
case $install_uninstall in
i|I)mount_rw
if [ ! -d "/sqlite_stmt_journals" ]; then
mkdir /sqlite_stmt_journals
fi
if [ ! -d "/data/TrimDropOff" ]; then
mkdir /data/TrimDropOff
chmod 755 /data/TrimDropOff
fi;;
u|U)mount_rw
rm /system/etc/init.d/Z99TrimDropOff_Sync 2>/dev/null
rm /system/etc/init.d/07TrimDropOff_Cron 2>/dev/null
rm /system/xbin/trimdrop 2>/dev/null
rm -rf /data/TrimDropOff 2>/dev/null
echo "Are you using cron.d for any other services?"
echo -n "Input es or o: "
read crond_use
echo
case $crond_use in
y|Y)sed '/TrimDropOff/d' -i /system/etc/cron.d/crontabs/root 2>/dev/null;;
n|N)rm -rf /system/etc/cron.d 2>/dev/null;;
*)input_error;;
esac
mount_ro
echo "All done. You can close your app now."
echo "Reboot your device to stop all processes."
exit 0;;
*)input_error;;
esac
wifi_only(){
cat > /system/etc/init.d/Z99TrimDropOff_Sync << EOF
#!/system/bin/sh
tdo_time(){
while [ ! "\`ps | grep -m 1 [a]ndroid\`" ]; do sleep 10; done
while [ 1 ]; do
AWAKE=\`cat /sys/power/wait_for_fb_wake\`
if [ "\$AWAKE" = "awake" ]; then
exec 1>/data/TrimDropOff/Awake.log
svc wifi enable
echo "\$(date +"%r %Y.%m.%d"): Waiting for screen to sleep. Confirming script in memory..."
echo "PIDs:"
pgrep -f TrimDrop
pidls=\`pgrep -f TrimDrop\`
echo "Verify Correct PIDs:"
for i in \$pidls; do
cat /proc/\$i/cmdline
done
echo ""
echo "RAM Usage:"
for i in \$pidls; do
dumpsys meminfo | grep \$i | grep sh | grep -m 1 pid
done
fi
SLEEPING=\`cat /sys/power/wait_for_fb_sleep\`
if [ "\$SLEEPING" = "sleeping" ]; then
exec 1>/data/TrimDropOff/Sleep.log
echo "\$(date +"%r %Y.%m.%d"): Offing."
svc wifi disable
fi
done
}
if [ "\`ps | grep -m 1 [a]ndroid\`" ]; then tdo_time
else exec > /data/TrimDropOff/Sync_BootErrors.log 2>&1
tdo_time &
fi
exit 0
EOF
}
fstrim_only(){
cat > /system/etc/init.d/Z99TrimDropOff_Sync << EOF
#!/system/bin/sh
tdo_time(){
while [ ! "\`ps | grep -m 1 [a]ndroid\`" ]; do sleep 10; done
while [ 1 ]; do
AWAKE=\`cat /sys/power/wait_for_fb_wake\`
if [ "\$AWAKE" = "awake" ]; then
exec 1>/data/TrimDropOff/Awake.log
echo "\$(date +"%r %Y.%m.%d"): Waiting for screen to sleep. Confirming script in memory..."
echo "PIDs:"
pgrep -f TrimDrop
pidls=\`pgrep -f TrimDrop\`
echo "Verify Correct PIDs:"
for i in \$pidls; do
cat /proc/\$i/cmdline
done
echo ""
echo "RAM Usage:"
for i in \$pidls; do
dumpsys meminfo | grep \$i | grep sh | grep -m 1 pid
done
fi
SLEEPING=\`cat /sys/power/wait_for_fb_sleep\`
if [ "\$SLEEPING" = "sleeping" ]; then
exec 1>/data/TrimDropOff/Sleep.log
echo "\$(date +"%r %Y.%m.%d"): Trimming."
echo "/system:"
busybox sync
fstrim -v /system
echo "/data:"
busybox sync
fstrim -v /data
echo "/cache:"
busybox sync
fstrim -v /cache
fi
done
}
if [ "\`ps | grep -m 1 [a]ndroid\`" ]; then tdo_time
else exec > /data/TrimDropOff/Sync_BootErrors.log 2>&1
tdo_time &
fi
exit 0
EOF
}
drop_only(){
cat > /system/etc/init.d/Z99TrimDropOff_Sync << EOF
#!/system/bin/sh
tdo_time(){
while [ ! "\`ps | grep -m 1 [a]ndroid\`" ]; do sleep 10; done
while [ 1 ]; do
AWAKE=\`cat /sys/power/wait_for_fb_wake\`
if [ "\$AWAKE" = "awake" ]; then
exec 1>/data/TrimDropOff/Awake.log
echo "\$(date +"%r %Y.%m.%d"): Waiting for screen to sleep. Confirming script in memory..."
echo "PIDs:"
pgrep -f TrimDrop
pidls=\`pgrep -f TrimDrop\`
echo "Verify Correct PIDs:"
for i in \$pidls; do
cat /proc/\$i/cmdline
done
echo ""
echo "RAM Usage:"
for i in \$pidls; do
dumpsys meminfo | grep \$i | grep sh | grep -m 1 pid
done
fi
SLEEPING=\`cat /sys/power/wait_for_fb_sleep\`
if [ "\$SLEEPING" = "sleeping" ]; then
exec 1>/data/TrimDropOff/Sleep.log
echo "\$(date +"%r %Y.%m.%d"): Dropping."
echo "drop caches:"
busybox sync
busybox sysctl -w vm.drop_caches=3
fi
done
}
if [ "\`ps | grep -m 1 [a]ndroid\`" ]; then tdo_time
else exec > /data/TrimDropOff/Sync_BootErrors.log 2>&1
tdo_time &
fi
exit 0
EOF
}
wifi_fstrim(){
cat > /system/etc/init.d/Z99TrimDropOff_Sync << EOF
#!/system/bin/sh
tdo_time(){
while [ ! "\`ps | grep -m 1 [a]ndroid\`" ]; do sleep 10; done
while [ 1 ]; do
AWAKE=\`cat /sys/power/wait_for_fb_wake\`
if [ "\$AWAKE" = "awake" ]; then
exec 1>/data/TrimDropOff/Awake.log
svc wifi enable
echo "\$(date +"%r %Y.%m.%d"): Waiting for screen to sleep. Confirming script in memory..."
echo "PIDs:"
pgrep -f TrimDrop
pidls=\`pgrep -f TrimDrop\`
echo "Verify Correct PIDs:"
for i in \$pidls; do
cat /proc/\$i/cmdline
done
echo ""
echo "RAM Usage:"
for i in \$pidls; do
dumpsys meminfo | grep \$i | grep sh | grep -m 1 pid
done
fi
SLEEPING=\`cat /sys/power/wait_for_fb_sleep\`
if [ "\$SLEEPING" = "sleeping" ]; then
exec 1>/data/TrimDropOff/Sleep.log
echo "\$(date +"%r %Y.%m.%d"): Trimming, Offing."
echo "/system:"
busybox sync
fstrim -v /system
echo "/data:"
busybox sync
fstrim -v /data
echo "/cache:"
busybox sync
fstrim -v /cache
svc wifi disable
fi
done
}
if [ "\`ps | grep -m 1 [a]ndroid\`" ]; then tdo_time
else exec > /data/TrimDropOff/Sync_BootErrors.log 2>&1
tdo_time &
fi
exit 0
EOF
}
wifi_drop(){
cat > /system/etc/init.d/Z99TrimDropOff_Sync << EOF
#!/system/bin/sh
tdo_time(){
while [ ! "\`ps | grep -m 1 [a]ndroid\`" ]; do sleep 10; done
while [ 1 ]; do
AWAKE=\`cat /sys/power/wait_for_fb_wake\`
if [ "\$AWAKE" = "awake" ]; then
exec 1>/data/TrimDropOff/Awake.log
svc wifi enable
echo "\$(date +"%r %Y.%m.%d"): Waiting for screen to sleep. Confirming script in memory..."
echo "PIDs:"
pgrep -f TrimDrop
pidls=\`pgrep -f TrimDrop\`
echo "Verify Correct PIDs:"
for i in \$pidls; do
cat /proc/\$i/cmdline
done
echo ""
echo "RAM Usage:"
for i in \$pidls; do
dumpsys meminfo | grep \$i | grep sh | grep -m 1 pid
done
fi
SLEEPING=\`cat /sys/power/wait_for_fb_sleep\`
if [ "\$SLEEPING" = "sleeping" ]; then
exec 1>/data/TrimDropOff/Sleep.log
echo "\$(date +"%r %Y.%m.%d"): Dropping, Offing."
echo "drop caches:"
busybox sync
busybox sysctl -w vm.drop_caches=3
svc wifi disable
fi
done
}
if [ "\`ps | grep -m 1 [a]ndroid\`" ]; then tdo_time
else exec > /data/TrimDropOff/Sync_BootErrors.log 2>&1
tdo_time &
fi
exit 0
EOF
}
fstrim_drop(){
cat > /system/etc/init.d/Z99TrimDropOff_Sync << EOF
#!/system/bin/sh
tdo_time(){
while [ ! "\`ps | grep -m 1 [a]ndroid\`" ]; do sleep 10; done
while [ 1 ]; do
AWAKE=\`cat /sys/power/wait_for_fb_wake\`
if [ "\$AWAKE" = "awake" ]; then
exec 1>/data/TrimDropOff/Awake.log
echo "\$(date +"%r %Y.%m.%d"): Waiting for screen to sleep. Confirming script in memory..."
echo "PIDs:"
pgrep -f TrimDrop
pidls=\`pgrep -f TrimDrop\`
echo "Verify Correct PIDs:"
for i in \$pidls; do
cat /proc/\$i/cmdline
done
echo ""
echo "RAM Usage:"
for i in \$pidls; do
dumpsys meminfo | grep \$i | grep sh | grep -m 1 pid
done
fi
SLEEPING=\`cat /sys/power/wait_for_fb_sleep\`
if [ "\$SLEEPING" = "sleeping" ]; then
exec 1>/data/TrimDropOff/Sleep.log
echo "\$(date +"%r %Y.%m.%d"): Trimming, Dropping."
echo "/system:"
busybox sync
fstrim -v /system
echo "/data:"
busybox sync
fstrim -v /data
echo "/cache:"
busybox sync
fstrim -v /cache
echo "drop caches:"
busybox sync
busybox sysctl -w vm.drop_caches=3
fi
done
}
if [ "\`ps | grep -m 1 [a]ndroid\`" ]; then tdo_time
else exec > /data/TrimDropOff/Sync_BootErrors.log 2>&1
tdo_time &
fi
exit 0
EOF
}
wifi_fstrim_drop(){
cat > /system/etc/init.d/Z99TrimDropOff_Sync << EOF
#!/system/bin/sh
tdo_time(){
while [ ! "\`ps | grep -m 1 [a]ndroid\`" ]; do sleep 10; done
while [ 1 ]; do
AWAKE=\`cat /sys/power/wait_for_fb_wake\`
if [ "\$AWAKE" = "awake" ]; then
exec 1>/data/TrimDropOff/Awake.log
svc wifi enable
echo "\$(date +"%r %Y.%m.%d"): Waiting for screen to sleep. Confirming script in memory..."
echo "PIDs:"
pgrep -f TrimDrop
pidls=\`pgrep -f TrimDrop\`
echo "Verify Correct PIDs:"
for i in \$pidls; do
cat /proc/\$i/cmdline
done
echo ""
echo "RAM Usage:"
for i in \$pidls; do
dumpsys meminfo | grep \$i | grep sh | grep -m 1 pid
done
fi
SLEEPING=\`cat /sys/power/wait_for_fb_sleep\`
if [ "\$SLEEPING" = "sleeping" ]; then
exec 1>/data/TrimDropOff/Sleep.log
echo "\$(date +"%r %Y.%m.%d"): Trimming, Dropping, Offing."
echo "/system:"
busybox sync
fstrim -v /system
echo "/data:"
busybox sync
fstrim -v /data
echo "/cache:"
busybox sync
fstrim -v /cache
echo "drop caches:"
busybox sync
busybox sysctl -w vm.drop_caches=3
svc wifi disable
fi
done
}
if [ "\`ps | grep -m 1 [a]ndroid\`" ]; then tdo_time
else exec > /data/TrimDropOff/Sync_BootErrors.log 2>&1
tdo_time &
fi
exit 0
EOF
}
echo "Do you want to sync fstrim, drop_caches=3, and/or"
echo "wifi with sleep?"
echo "WARNING: This will cause init.d scripts with a"
echo "priority lower than Z99 to NOT execute."
echo -n "Input es or o: "
read TDOsync
echo
case $TDOsync in
y|Y)echo "Which function(s) would you like to sync with sleep?"
echo "Input 1 for wifi only, 2 for fstrim only,"
echo "3 for drop_caches only, 4 for wifi and fstrim"
echo "5 for wifi and drop, 6 for fstrim and drop, or"
echo -n "7 for all: "
read sync_opt
echo
case $sync_opt in
1)wifi_only;;
2)fstrim_only;;
3)drop_only;;
4)wifi_fstrim;;
5)wifi_drop;;
6)fsrim_drop;;
7)wifi_fstrim_drop;;
*)input_error;;
esac
chmod 755 /system/etc/init.d/Z99TrimDropOff_Sync;;
n|N);;
*)input_error;;
esac
only_fstrim(){
cat > /data/TrimDropOff/TrimDropOff_Cron << EOF
#!/system/bin/sh
# This script was authored by Defiant07 @ xda. Feel free to use it as you see fit, but please give proper credits.
# Read Karl Marx.
exec 1>/data/TrimDropOff/CronRan.log
echo "\$(date +"%r %Y.%m.%d"): Trimming."
echo "/system:"
busybox sync
fstrim -v /system
echo "/data:"
busybox sync
fstrim -v /data
echo "/cache:"
busybox sync
fstrim -v /cache
exit 0
EOF
}
only_drop(){
cat > /data/TrimDropOff/TrimDropOff_Cron << EOF
#!/system/bin/sh
# This script was authored by Defiant07 @ xda. Feel free to use it as you see fit, but please give proper credits.
# Read Karl Marx.
exec 1>/data/TrimDropOff/CronRan.log
echo "\$(date +"%r %Y.%m.%d"): Dropping."
echo "drop caches:"
busybox sync
busybox sysctl -w vm.drop_caches=3
exit 0
EOF
}
both_funct(){
cat > /data/TrimDropOff/TrimDropOff_Cron << EOF
#!/system/bin/sh
# This script was authored by Defiant07 @ xda. Feel free to use it as you see fit, but please give proper credits.
# Read Karl Marx.
exec 1>/data/TrimDropOff/CronRan.log
echo "\$(date +"%r %Y.%m.%d"): Trimming, Dropping."
echo "/system:"
busybox sync
fstrim -v /system
echo "/data:"
busybox sync
fstrim -v /data
echo "/cache:"
busybox sync
fstrim -v /cache
echo "drop caches:"
busybox sync
busybox sysctl -w vm.drop_caches=3
exit 0
EOF
}
cron_starter(){
cat > /system/etc/init.d/07TrimDropOff_Cron << EOF
#!/system/bin/sh
# This script was authored by Defiant07 @ xda. Feel free to use it as you see fit, but please give proper credits.
# Read Karl Marx.
tdo_time(){
while [ ! "\`ps | grep -m 1 [a]ndroid\`" ]; do sleep 10; done
crond
exec 1>/data/TrimDropOff/CronBoot.log
echo "\$(date +"%r %Y.%m.%d"): cron.d service started."
echo "PIDs:"
pgrep crond
pidls=\`pgrep crond\`
echo "Verify Correct PIDs:"
for i in \$pidls; do
cat /proc/\$i/cmdline
done
echo ""
echo "RAM Usage:"
for i in \$pidls; do
dumpsys meminfo | grep \$i | grep -m 1 crond
done
}
if [ "\`ps | grep -m 1 [a]ndroid\`" ]; then tdo_time
else exec > /data/TrimDropOff/Cron_BootErrors.log 2>&1
tdo_time &
fi
exit 0
EOF
}
echo "Do you want to run fstrim and/or drop_caches"
echo "on a schedule?"
echo -n "Input es or o: "
read sched_opt
echo
case $sched_opt in
y|Y)echo "Which function do you want to schedule?"
echo "Input (f)strim only, (d)rop_caches only,"
echo -n "or (b)oth: "
read funct_opt
echo
case $funct_opt in
f|F)only_fstrim;;
d|D)only_drop;;
b|B)both_funct;;
*)input_error;;
esac
chmod 755 /data/TrimDropOff/TrimDropOff_Cron
echo "Do you want to schedule the function(s)"
echo "on an hourly or daily basis?"
echo -n "Input (h)ourly or (d)aily: "
read sched_opt
echo
if [ ! -d "/system/etc/cron.d" ]; then
mkdir /system/etc/cron.d
chmod 755 /system/etc/cron.d
fi
if [ ! -d "/system/etc/cron.d/crontabs" ]; then
mkdir /system/etc/cron.d/crontabs
chmod 755 /system/etc/cron.d/crontabs
fi
cron_starter
chmod 755 /system/etc/init.d/07TrimDropOff_Cron
case $sched_opt in
h|H)echo "Input 1 to run every hour, 2 to run every two hours,"
echo -n "3 to run every three hours...etc: "
read hour_opt
echo
if [ ! "`echo $hour_opt | awk '!/[^0-9]/'`" ]; then
input_error
fi
if [ -f "/system/etc/cron.d/crontabs/root" ]; then
echo "0 */$hour_opt * * * nohup /data/TrimDropOff/TrimDropOff_Cron" >> /system/etc/cron.d/crontabs/root
else
echo "0 */$hour_opt * * * nohup /data/TrimDropOff/TrimDropOff_Cron" > /system/etc/cron.d/crontabs/root
fi
chmod 755 /system/etc/cron.d/crontabs/root;;
d|D)echo "Input 0 to run at midnight every day,"
echo "1 to run at 1:00 am...13 to run at 1:00 pm"
echo -n "...etc...up to 23: "
read daily_opt
echo
if [ ! "`echo $daily_opt | awk '!/[^0-9]/ && $1<=23'`" ]; then
input_error
fi
if [ -f "/system/etc/cron.d/crontabs/root" ]; then
echo "0 $daily_opt * * * nohup /data/TrimDropOff/TrimDropOff_Cron" >> /system/etc/cron.d/crontabs/root
else
echo "0 $daily_opt * * * nohup /data/TrimDropOff/TrimDropOff_Cron" > /system/etc/cron.d/crontabs/root
fi
chmod 755 /system/etc/cron.d/crontabs/root;;
*)input_error;;
esac;;
n|N);;
*)input_error;;
esac
cat > /system/xbin/trimdrop << EOF
#!/system/bin/sh
# This script was authored by Defiant07 @ xda. Feel free to use it as you see fit, but please give proper credits.
# Read Karl Marx.
clear
trimmer(){
echo "/system:"
busybox sync
fstrim -v /system
echo "/data:"
busybox sync
fstrim -v /data
echo "/cache:"
busybox sync
fstrim -v /cache
}
dropper(){
echo "drop caches:"
busybox sync
busybox sysctl -w vm.drop_caches=3
}
echo -n "Do you want to run (f)strim, (d)rop_caches=3, or (b)oth? "
read funct_opt
echo
case \$funct_opt in
f|F)trimmer;;
d|D)dropper;;
b|B)trimmer
dropper;;
*)echo "That is not a valid input...try again...bye ."
exit 69;;
esac
echo
echo "All done...enjoy! You can close your app now."
exit 0
EOF
chmod 755 /system/xbin/trimdrop
mount_ro
echo "In addition to making the files required by"
echo "your desired configuration, I have also made"
echo "an on-the-fly script to run fstrim and/or"
echo "drop_caches on-demand."
echo "To use it, in terminal do: su -c trimdrop"
echo
sleep 3
echo "Reboot your device to start your desired services."
echo
sleep 3
echo "If you want to know how to verify everything"
echo "is working, read the script's OP (FFS)!"
echo
sleep 5
echo "All done...enjoy! You can close your app now."
exit 0
Click to expand...
Click to collapse
Changelog:
v2.0
made in to installer script
added cron options
added bootloop precautions to the init.d scripts (should make it compatible with all devices that meet the requirments)
the on-the-fly script, trimdrop, now allows user to choose fstrim and/or drop_caches=3
added more syncs to further ensure no data is lost
a bunch of other stuff I probably forget
v2.1
bug fixes - fixed issue if using only sync option (missing directory); fixed display of irrelevant errors in uninstall routine
cleaned code a bit (reduced redundancy)
Click to expand...
Click to collapse
Download History:
Defiant07s_TrimDropOff.zip - [Click for QR Code] (1.6 KB, 162 views)
Defiant07s_TrimDropOff_v2.0_[NOT_FLASHABLE].zip - [Click for QR Code] (3.0 KB, 89 views)
Click to expand...
Click to collapse
Credits:
Big thanks to @zeppelinrox, @dk_zero-cool, & @gu5t3r for their contributions to portions of this script (see the code of my other script SwapItOn for detailed citations).
Much thanks to @mdamaged for spotting the issue with sync init.d script and his note regarding syncing data.
Click to expand...
Click to collapse
Don't forget to click THANKS and RATE 5 STARS if you found this useful :highfive:.
peep my other script SwapItOn
Update to v2.1 if you were only using the sync option.
If you were using both the sync and schedule options or only the schedule option there is no need to update; the bug I found would not effect you.
reserved...on the off chance it will be needed
Thanks, sounds interesting. I'm assuming the zip can be flashed right after flashing a new rom?
MidnightDevil said:
Thanks, sounds interesting. I'm assuming the zip can be flashed right after flashing a new rom?
Click to expand...
Click to collapse
Not a flashable ZIP per line 2.
AnarchoXen said:
Not a flashable ZIP per line 2.
Click to expand...
Click to collapse
Oh, thanks
Is compatible with custom kernel? Franco in my case
vía n7II r-paco
Will performing trimming operations too frequently cause additional flash memory degradation?
MidnightDevil said:
Thanks, sounds interesting. I'm assuming the zip can be flashed right after flashing a new rom?
Click to expand...
Click to collapse
As you were informed the zip is NOT flashable. If there is sufficient interest (say a 100 downloads) I'll make it flashable/aroma.
jordirpz said:
Is compatible with custom kernel? Franco in my case
vía n7II r-paco
Click to expand...
Click to collapse
Yes, it should be compatible...the fstrim utility is part of the rom (it should be in all nexus 4.3+ roms).
creeve4 said:
Will performing trimming operations too frequently cause additional flash memory degradation?
Click to expand...
Click to collapse
No, to my limited knowledge it should not be harmful (in fact it should increase lifespan - google "fstrim lifespan"). Did a quick google search but could not find anything definitive/reliable regarding frequency...what I did see seemed to suggest 'no' though.
If you are concerned about the frequency, you could not install the init.d script and just use the on-the-fly script, trimdrop, to trim on-demand. Should there be interest and if I have the motivation and time, I have been thinking about making this in to an installer script and/or aroma zip with cron-based options so it could be scheduled hourly, daily, or weekly.
Scheduling options would be awesome!
creeve4 said:
Scheduling options would be awesome!
Click to expand...
Click to collapse
+1
creeve4 said:
Scheduling options would be awesome!
Click to expand...
Click to collapse
BUBA0071 said:
+1
Click to expand...
Click to collapse
Seems there is a decent amount of interest (almost 100 downloads already ...thanks peeps), as such I'll add options and make things more configurable.
Regarding scheduling, I was thinking of doing hourly, daily (with ability to choose time), and weekly (with ability to choose day and time) options. Would every other hour or some other setting be desirable?
Regarding installation, what would be the preferred method, an installer script (e.g. V6 SuperCharger) or AROMA? Flashable zips would be another option, but would have less options/be less configurable.
Gimme some feedback and I'll put something together in the next week or two depending on work and my motivation .
wasn't this a nexus 7 2012 issue and fixed in the new version 2013?
defiant07 said:
Seems there is a decent amount of interest (almost 100 downloads already ...thanks peeps), as such I'll add options and make things more configurable.
Regarding scheduling, I was thinking of doing hourly, daily (with ability to choose time), and weekly (with ability to choose day and time) options. Would every other hour or some other setting be desirable?
Regarding installation, what would be the preferred method, an installer script (e.g. V6 SuperCharger) or AROMA? Flashable zips would be another option, but would have less options/be less configurable.
Gimme some feedback and I'll put something together in the next week or two depending on work and my motivation .
Click to expand...
Click to collapse
My 2 cents:
I would choose a daily option for my device.
I prefer Aroma over a script, but if you cannot get the customization you want with Aroma, then by all means go with a script.
Thanks again for the script and willingness to make it even better!
Thanks for the scripts, I time my startup, and this improved startup time by about 3-4secs, among other noticible improvements, apparently the stock OS does not run fstrim enough, initial operations freed several gigs on the data partition, and hundreds of megs on the others...
creeve4 said:
My 2 cents:
I would choose a daily option for my device.
I prefer Aroma over a script, but if you cannot get the customization you want with Aroma, then by all means go with a script.
Thanks again for the script and willingness to make it even better!
Click to expand...
Click to collapse
+1
Im going to turn this into a cron job, that will take care of scheduling, unless anyone else gets there first ( please lol )
Will give it a go in its present form, whats its resource footprint just sitting there waiting for screen off ?
Can we trigger the action from the screen off event ? or some other interupt type way ?
Great script by the way, your bash is damn site better than mine, jealous lol
KiaraTheDragon said:
wasn't this a nexus 7 2012 issue and fixed in the new version 2013?
Click to expand...
Click to collapse
Yes, I think this is true to a degree...it was more of a problem on the 2012 and other nexus devices. See the links in the OP for the conditions that need to be met for fstrim to autorun...for some users (myself included) the conditions will seldom if ever be met. Also see @mdamaged post; I get similar results the first time fstrim is initiated by my script after each boot...subsequent runs normally only frees up memory on /data.
creeve4 said:
My 2 cents:
I would choose a daily option for my device.
I prefer Aroma over a script, but if you cannot get the customization you want with Aroma, then by all means go with a script.
Thanks again for the script and willingness to make it even better!
Click to expand...
Click to collapse
imfun said:
+1
Click to expand...
Click to collapse
Okay will get to making an AROMA package...it will be my first, but it looks easy enough :fingers-crossed:...gimme a week or two to put it together and fully test.
mdamaged said:
Thanks for the scripts, I time my startup, and this improved startup time by about 3-4secs, among other noticible improvements, apparently the stock OS does not run fstrim enough, initial operations freed several gigs on the data partition, and hundreds of megs on the others...
Click to expand...
Click to collapse
Thanks for the feedback. I get similar results.
jubei_mitsuyoshi said:
Im going to turn this into a cron job, that will take care of scheduling, unless anyone else gets there first ( please lol )
Will give it a go in its present form, whats its resource footprint just sitting there waiting for screen off ?
Can we trigger the action from the screen off event ? or some other interupt type way ?
Great script by the way, your bash is damn site better than mine, jealous lol
Click to expand...
Click to collapse
See the first post on this page and my response to @creeve4 and @imfun in this post. I will make an AROMA package with cron options for fstrim and drop_caches=3.
However, should you feel ambitious and beat me to it, props to you...I will give you full credit in the OP and link your post as the d/l source so you should get the 'thanks' too.
Regarding triggering with screen on/off or some other event: It can probably be done, but I it's beyond my knowledge (screen on/off was actually the first trigger event I looked in to using, but despite fairly extensive searching I could not find how to detect it).
Regarding resource footprint: Read the OP (usage section) it explains where to find the log which contains this info and how to do it via terminal (should you not trust me )...also see OP (benefits section): in all my testing I have never seen it use more that .8 mb, but most of the time it is less than .2 mb.
Okay will get to making an AROMA package...it will be my first, but it looks easy enough :fingers-crossed:...gimme a week or two to put it together and fully test.
Click to expand...
Click to collapse
Can't wait already, because after whole day or two, hard usage of my nexus 7 tablet, the tablet starts to get laggy. I can see this on web browsing, touch press delay time, and onyl rebooting seems to help... Hope after istaling this will solve the problems
ohhh no dont want any credit lol lol, i have turned it into a cron job quite simply by adding it to the cron initilising script
Code:
###########
# IMPORTS #
###########
. /system/etc/init.d.cfg
#############
# FUNCTIONS #
#############
symlink_system_bin() {
# crond has "/bin/sh" hardcoded
if busybox [ ! -h /bin ]
then
mount -o remount,rw rootfs /
busybox ln -s /system/bin /bin
mount -o remount,ro rootfs /
fi
}
export_timezone() {
# set timezone (if you're not between -0500 and -0800 you get PST)
# todo - support other timezones
timezone=`date +%z`
if busybox [ $timezone = "-0800" ]; then
TZ=PST8PDT
elif busybox [ $timezone = "-0700" ]; then
TZ=MST7MDT
elif busybox [ $timezone = "-0600" ]; then
TZ=CST6CDT
elif busybox [ $timezone = "-0500" ]; then
TZ=EST5EDT
else
TZ=PST8PDT
fi
export TZ
}
set_crontab() {
# use /data/cron, call the crontab file "root"
if busybox [ -e /data/cron/root ]
then
mkdir -p /data/cron
cat > /data/cron/root << EOF
0 20 * * * sync; echo 3 > /proc/sys/vm/drop_caches
0 20 * * * sync; fstrim -v /system
0 20 * * * sync; fstrim -v /data
0 20 * * * sync; fstrim -v /cache
01 * * * * busybox run-parts /system/etc/cron/cron.hourly
02 4 * * * busybox run-parts /system/etc/cron/cron.daily
22 4 * * 0 busybox run-parts /system/etc/cron/cron.weekly
EOF
fi
busybox crond -c /data/cron
}
########
# MAIN #
########
if $enable_cron -a is_busybox_applet_available crond
then
symlink_system_bin
export_timezone
set_crontab
fi
adding the lines
Code:
0 20 * * * sync; echo 3 > /proc/sys/vm/drop_caches
0 20 * * * sync; fstrim -v /system
0 20 * * * sync; fstrim -v /data
0 20 * * * sync; fstrim -v /cache
should drop the caches and fstrim every 8 hours, oviously set to anything you want.
i also stuck it in boot at the end
/system/etc/init.d/92jubei
Code:
#!/system/bin/sh
if $file_system_speedups
then
busybox mount -o remount,noatime,barrier=0,nobh /system
busybox mount -o remount,noatime /data
busybox mount -o remount,noatime,barrier=0,nobh /cache
else
busybox mount -o remount,noatime,nobh /system
busybox mount -o remount,noatime /data
busybox mount -o remount,noatime,nobh /cache
fi
echo "$(date +"%r %Y.%m.%d"): Trimming, Dropping."
busybox sync
echo "/system:"
fstrim -v /system
echo "/data:"
fstrim -v /data
echo "/cache:"
fstrim -v /cache
echo "drop caches:"
busybox sysctl -w vm.drop_caches=3
exit 0
For an aroma script you will prob have to stick the file in /system/etc/cron/cron.hourly, daily, weekly and just give peeps that choice, will be most simple way. Ps not a fan of aroma lol
Ok, I should have spotted this issue right away, but did not, so here goes. It seems the use of while loop in the script in the OP causes any scripts with a lower priority in init.d to never get ran, if the script in the OP is the only one in your init.d this does not matter, nor should it matter if you have at boot script with a higher priority (they get ran before the OPs script).
I run the ElementalX kernel which depends on a init.d to initialize some parameters for the kernel, with this script in init.d they never get initialized, in my case this resulted in some things not 'taking' such as the battery life extender, which on my device, is set to stop charging at 4100mv, however, since the while loop kept the ElementalX init.d from running, it kept charging to ~4300mv, this is how I noticed (actually none of my settings wrt ElementalX were being initialized, but this symptom was most pronounced).
A simple fix would be to move up the priority of the ElementalX init.d script, but this would have to be done after each flash, and frankly since I run Tasker anyway, I saw no need for this, what I did was remove the OPs script from init.d and simply made a very simple task in Tasker to run /system/xbin/trimdrop when display goes off, it could just as easily be a time event.
Anyways, hope that helps someone who may come across this with other kernels, or other at-boot scripts which depend on being ran before the OPs script.
Again, thanks to the OP for his work. Also, I added another sync just before the drop caches, since the state of dirtyness could change after the fstrims.
I present you universal script to enable Init.d in ALL ANDROID DEVICES (I hope...) while running the stock kernel. NO BUSYBOX needed! It is packed in easy to use ZIP flashable
EDIT: This script will NOT work with Magisk! However, notice that using Magisk you do not need init.d support at all (you can put your scripts in /magisk/.core/post-fs-data.d OR /magisk/.core/service.d, depending on your needs).
Requirements:
- a rooted Android device (SuperSU)
- ANY tool to flash a ZIP (custom recovery or FlashFire app)
Installation:
1. Custom recovery - open file using "Install Zip" option and confirm "Yes - install..."
2. FlashFire - open file using "Flash ZIP or OTA" option (default mount options). Tap "FLASH"
How to check:
Just check if /data/initd_test.log file exists (optionally you can check its content)
Changelog:
v1.3:
★ This version automatically detects privileges of launched sh script used to trigger init.d and if these are not sufficient to remount /system rw - all commands are automatically expanded to "/su/bin/su -c [command]" or "/system/xbin/su -c [command]" (depending on SuperSU install mode)
★ Fixed problem with "exit 0" at the end of used sh script resulting that simply added new lines never worked. This version automatically detects such case and moves "exit 0" at the end of modified file
★ SELinux context autodetection - starting from v1.3 modified file has always exact same context as original file
★ BusyBox will not be used anymore, even if exists (checking the presence removed)
v1.2:
★ Starting from this version installer performs more secure and only 100% reversible actions. Original *.sh file is never touched (just renamed to *.bak to keep its original attributes, including context). Installer will try to set to modified file as many attributes taken from original file as possible (instead of forcing "known values").
★ Added initd_remover.zip. Use it if you want to remove Init.d support (enabled by script from this thread!) and restore 100% original system files
v1.1:
★ Avoids potential WiFi problems in case of Samsung S6 (and probably other Samsung's Exynos based devices running Android 6.0.1) - see post #3
v1.0:
★ Initial version
Enabler [sh script]:
Code:
#!/sbin/sh
# Init.d enabler by ALEXNDR (_alexndr @ XDA)
OUTFD=/proc/self/fd/$2
ui_print() {
echo -n -e "ui_print $1\n" >> $OUTFD
echo -n -e "ui_print\n" >> $OUTFD
}
set_perm() {
chown $1.$2 $4
chown $1:$2 $4
chmod $3 $4
if [ -z "$5" ] ; then
chcon u:object_r:system_file:s0 $4
else
chcon u:object_r:$5:s0 $4
fi
}
resolve_link() {
if [ -z "$1" ] || [ ! -e $1 ] ; then return 1 ; fi
local VAR=$1
while [ -h "$VAR" ] ; do
VAR=$(readlink $VAR)
done
echo $VAR
}
is_mounted() {
if [ -z "$2" ] ; then
cat /proc/mounts | grep $1 >/dev/null
else
cat /proc/mounts | grep $1 | grep "$2," >/dev/null
fi
return $?
}
ui_print " "
ui_print "=========================================="
ui_print "Init.d enabler by ALEXNDR (_alexndr @ XDA)"
ui_print "=========================================="
ui_print " "
SYSTEM=$(resolve_link $(find /dev/block/platform -type l | grep -i -m 1 "/app$")) ||
SYSTEM=$(resolve_link $(find /dev/block/platform -type l | grep -i -m 1 "/system$"))
if (! is_mounted /system) ; then mount -o rw /system ; fi
if (! is_mounted /system rw) ; then mount -o rw,remount /system ; fi
if (! is_mounted /system rw) ; then mount -t ext4 -o rw $SYSTEM /system ; fi
if (! is_mounted /system rw) ; then mount -t f2fs -o rw $SYSTEM /system ; fi
if (! is_mounted /system rw) ; then
ui_print "Failed! Can't mount /system rw, aborting!"
ui_print " "
exit 1
fi
SYSLIB=/system/lib
cat /system/build.prop | grep "ro.product.cpu.abilist=" | grep "64" >/dev/null && SYSLIB=/system/lib64
cat /system/build.prop | grep "ro.product.cpu.abi=" | grep "64" >/dev/null && SYSLIB=/system/lib64
# These files are prefered to trigger init.d scripts (in following order, if exists):
# /system/etc/init.*.post_boot.sh
# /system/etc/*.post_boot.sh
# /system/etc/init.*.boot.sh
# /system/etc/*.boot.sh
#
# /system/bin/debuggerd is used if there is no suitable *.sh file in /system/etc
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.boot\.sh$") ||
BOOTFILE=/system/bin/debuggerd
BOOTCON=$(ls -Z $BOOTFILE 2>/dev/null | grep "u:object_r" | cut -d: -f3)
if [ -z "$BOOTCON" ] ; then
BOOTCON=$(LD_LIBRARY_PATH=$SYSLIB /system/bin/toolbox ls -Z $BOOTFILE 2>/dev/null | grep "u:object_r" | cut -d: -f3)
fi
if [ -z "$BOOTCON" ] ; then
BOOTCON=$(LD_LIBRARY_PATH=$SYSLIB /system/bin/toybox ls -Z $BOOTFILE 2>/dev/null | grep "u:object_r" | cut -d: -f3)
fi
if [ -z "$BOOTCON" ] ; then
BOOTCON=system_file
fi
cat $BOOTFILE | grep "^exit 0" >/dev/null && EXIT=true || EXIT=false
if [ -z "$(cat $BOOTFILE | grep "Init\.d")" ] ; then
if [ "$BOOTFILE" = "/system/bin/debuggerd" ] ; then
if [ ! -f /system/bin/debuggerd_real ] ; then
mv -f $BOOTFILE /system/bin/debuggerd_real
echo "#!/system/bin/sh" > $BOOTFILE
else
sed -i '/debuggerd_real/d' $BOOTFILE
fi
else
mv -f $BOOTFILE "$BOOTFILE.bak"
cp -pf "$BOOTFILE.bak" $BOOTFILE
if ($EXIT) ; then sed -i '/^exit 0/d' $BOOTFILE ; fi
echo "" >> $BOOTFILE
fi
echo "# Init.d support" >> $BOOTFILE
echo 'SU="$(ls /su/bin/su 2>/dev/null || ls /system/xbin/su) -c"' >> $BOOTFILE
echo 'mount -o rw,remount /system && SU="" || eval "$SU mount -o rw,remount /system"' >> $BOOTFILE
echo 'eval "$SU chmod 777 /system/etc/init.d"' >> $BOOTFILE
echo 'eval "$SU chmod 777 /system/etc/init.d/*"' >> $BOOTFILE
echo 'eval "$SU mount -o ro,remount /system"' >> $BOOTFILE
echo 'ls /system/etc/init.d/* 2>/dev/null | while read xfile ; do eval "$SU /system/bin/sh $xfile" ; done' >> $BOOTFILE
if [ "$BOOTFILE" = "/system/bin/debuggerd" ] ; then
echo '/system/bin/debuggerd_real [email protected]' >> $BOOTFILE
set_perm 0 2000 755 $BOOTFILE $BOOTCON
else
if ($EXIT) ; then echo "exit 0" >> $BOOTFILE ; fi
chcon u:object_r:$BOOTCON:s0 $BOOTFILE
fi
mkdir -p /system/etc/init.d
echo "#!/system/bin/sh" > /system/etc/init.d/00test
echo "# Init.d test" >> /system/etc/init.d/00test
echo 'echo "Init.d is working !!!" > /data/initd_test.log' >> /system/etc/init.d/00test
echo 'echo "excecuted on $(date +"%d-%m-%Y %r")" >> /data/initd_test.log' >> /system/etc/init.d/00test
echo "#!/system/bin/sh" > /system/etc/init.d/99SuperSUDaemon
echo "/system/xbin/daemonsu --auto-daemon &" >> /system/etc/init.d/99SuperSUDaemon
set_perm 0 0 777 /system/etc/init.d
set_perm 0 0 777 "/system/etc/init.d/*"
ui_print "Init.d has been successfully enabled"
ui_print "using following file run at boot:"
ui_print " "
ui_print "$BOOTFILE"
ui_print " "
ui_print "Check result in /data/initd_test.log file"
ui_print " "
else
ui_print "Init.d is enabled already, aborting!"
ui_print " " # exit is not necessary
fi
umount /system
exit 0
Remover [sh script]:
Code:
#!/sbin/sh
# Init.d remover by ALEXNDR (_alexndr @ XDA)
OUTFD=/proc/self/fd/$2
ui_print() {
echo -n -e "ui_print $1\n" >> $OUTFD
echo -n -e "ui_print\n" >> $OUTFD
}
resolve_link() {
if [ -z "$1" ] || [ ! -e $1 ] ; then return 1 ; fi
local VAR=$1
while [ -h "$VAR" ] ; do
VAR=$(readlink $VAR)
done
echo $VAR
}
is_mounted() {
if [ -z "$2" ] ; then
cat /proc/mounts | grep $1 >/dev/null
else
cat /proc/mounts | grep $1 | grep "$2," >/dev/null
fi
return $?
}
ui_print " "
ui_print "=========================================="
ui_print "Init.d remover by ALEXNDR (_alexndr @ XDA)"
ui_print "=========================================="
ui_print " "
SYSTEM=$(resolve_link $(find /dev/block/platform -type l | grep -i -m 1 "/app$")) ||
SYSTEM=$(resolve_link $(find /dev/block/platform -type l | grep -i -m 1 "/system$"))
if (! is_mounted /system) ; then mount -o rw /system ; fi
if (! is_mounted /system rw) ; then mount -o rw,remount /system ; fi
if (! is_mounted /system rw) ; then mount -t ext4 -o rw $SYSTEM /system ; fi
if (! is_mounted /system rw) ; then mount -t f2fs -o rw $SYSTEM /system ; fi
if (! is_mounted /system rw) ; then
ui_print "Failed! Can't mount /system rw, aborting!"
ui_print " "
exit 1
fi
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.boot\.sh$") ||
BOOTFILE=/system/bin/debuggerd
if [ ! -z "$(cat $BOOTFILE | grep "Init\.d")" ] ; then
if [ "$BOOTFILE" = "/system/bin/debuggerd" ] ; then
if [ -f /system/bin/debuggerd_real ] ; then
rm -f $BOOTFILE
mv -f /system/bin/debuggerd_real $BOOTFILE
else
ui_print "Failed! Missing debuggerd_real file!"
exit 1
fi
elif [ -f "$BOOTFILE.bak" ] ; then
rm -f $BOOTFILE
mv -f "$BOOTFILE.bak" $BOOTFILE
else
ui_print "Failed! Missing *.sh.bak file!"
exit 1
fi
rm -Rf /system/etc/init.d
ui_print "Init.d has been successfully removed :)"
else
ui_print "Init.d by ALEXNDR has not been detected!"
fi
ui_print " "
umount /system
exit 0
NOTE:
If it does not work for your device - please post here a feedback! I will try to find a reason and tune my script
Credits: @Chainfire, @JustArchi
Hit Thanks button if you like my work. If you really appreciate my work - feel free to buy me a beer
Great Work..
Thanks
@_alexndr mate today i tried ur init.d enabled but on my s6 mm 6.0.1 its bricked my wifi as after flashing ur script i can't get wifi connected any fix for MM ?? Thanks
thereassaad said:
@_alexndr mate today i tried ur init.d enabled but on my s6 mm 6.0.1 its bricked my wifi as after flashing ur script i can't get wifi connected any fix for MM ?? Thanks
Click to expand...
Click to collapse
In my case work good no problem with WiFi connection on S5 MM 6.0.1
Regards
thereassaad said:
@_alexndr mate today i tried ur init.d enabled but on my s6 mm 6.0.1 its bricked my wifi as after flashing ur script i can't get wifi connected any fix for MM ?? Thanks
Click to expand...
Click to collapse
Strange as my installer in case of G920F should only add to /system/etc/init.sec.boot.sh following lines:
Code:
# Init.d support
mount -o rw,remount /system
chmod 777 /system/etc/init.d
chmod 777 /system/etc/init.d/*
mount -o ro,remount /system
busybox run-parts /system/etc/init.d
or following if busybox has not been installed:
Code:
# Init.d support
mount -o rw,remount /system
chmod 777 /system/etc/init.d
chmod 777 /system/etc/init.d/*
mount -o ro,remount /system
ls /system/etc/init.d/* 2>/dev/null | while read xfile ; do $xfile ; done
Original file should be renamed to /system/etc/init.sec.boot.sh.bak, so you can just delete modified init.sec.boot.sh and then rename init.sec.boot.sh.bak -> init.sec.boot.sh to revert changes (+ delete /system/etc/init.d folder but it's just a cosmetic)
...but before you do it - it would be great if you help in further development and try if following command put in terminal emulator or adb shell will help:
Code:
su
mount -o rw,remount /system
chmod 550 /system/etc/init.sec.boot.sh
chown 0:2000 /system/etc/init.sec.boot.sh
chcon u:object_r:sec-sh_exec:s0 /system/etc/init.sec.boot.sh
mount -o ro,remount /system
...then reboot device
EDIT:
Anyway - #1 has been updated as I found potential permissions / SELinux context mismatch in case of Samsung's Exynos based devices running Android 6.0.1. NOTE: It will not fix broken installation already done - you need to revert changes first (as I mentioned above - by deleting init.sec.boot.sh and renaming init.sec.boot.sh.bak -> init.sec.boot.sh) and then re-flash v1.1
Another update
Changelog:
v1.2:
★ Starting from this version installer performs more secure and only 100% reversible actions. Original *.sh file is never touched (just renamed to *.bak to keep its original attributes, including context). Installer will try to set to modified file as many attributes taken from original file as possible (instead of forcing "known values").
★ Added initd_remover.zip. Use it if you want to remove Init.d support (enabled by script from this thread!) and restore 100% original system files
@_alexndr , definitely mate will give a shot , later , thanks for ur work xD ,
good work bro will test more with new update
Good work ?
Sent from my A66A using XDA-Developers mobile app
Another update
Changelog:
v1.3:
★ This version automatically detects privileges of launched sh script used to trigger init.d and if these are not sufficient to remount /system rw - all commands are automatically expanded to "/su/bin/su -c [command]" or "/system/xbin/su -c [command]" (depending on SuperSU install mode)
★ Fixed problem with "exit 0" at the end of used sh script resulting that simply added new lines never worked. This version automatically detects such case and moves "exit 0" at the end of modified file
★ SELinux context autodetection - starting from v1.3 modified file has always exact same context as original file
★ BusyBox will not be used anymore, even if exists (checking the presence removed)
First of all really thank you for this script which works very well...except if included in the installation script.
The initd.sh is this
I use this command in the updater-script:
ui_print("@ Add init.d support");
package_extract_file("tools/initd.sh", "/tmp/initd.sh");
set_perm(0, 0, 0777, "/tmp/initd.sh");
run_program("/tmp/initd.sh");
delete("/tmp/initd.sh");
ui_print("--> Init.d Installed");
But not working. Got this error in recovery log
run_program: execv failed: No such file or directory
run_program: child exited with status 1
Any advice or a proper .sh script please ?
Thanks very much.
WILMANS2M said:
First of all really thank you for this script which works very well...except if included in the installation script.
The initd.sh is this
I use this command in the updater-script:
ui_print("@ Add init.d support");
package_extract_file("tools/initd.sh", "/tmp/initd.sh");
set_perm(0, 0, 0777, "/tmp/initd.sh");
run_program("/tmp/initd.sh");
delete("/tmp/initd.sh");
ui_print("--> Init.d Installed");
But not working. Got this error in recovery log
run_program: execv failed: No such file or directory
run_program: child exited with status 1
Any advice or a proper .sh script please ?
Thanks very much.
Click to expand...
Click to collapse
My script (as it is in post #1) is designed to be standalone installer. If you want to enable init.d by a sh script called from the updater-script - please try as follow:
Code:
#!/sbin/sh
# Init.d enabler by ALEXNDR (_alexndr @ XDA)
set_perm() {
chown $1.$2 $4
chown $1:$2 $4
chmod $3 $4
if [ -z "$5" ] ; then
chcon u:object_r:system_file:s0 $4
else
chcon u:object_r:$5:s0 $4
fi
}
# These files are prefered to trigger init.d scripts (in following order, if exists):
# /system/etc/init.*.post_boot.sh
# /system/etc/*.post_boot.sh
# /system/etc/init.*.boot.sh
# /system/etc/*.boot.sh
#
# /system/bin/debuggerd is used if there is no suitable *.sh file in /system/etc
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.boot\.sh$") ||
BOOTFILE=/system/bin/debuggerd
BOOTCON=$(ls -Z $BOOTFILE 2>/dev/null | grep "u:object_r" | cut -d: -f3)
if [ -z "$BOOTCON" ] ; then
BOOTCON=system_file
fi
cat $BOOTFILE | grep "^exit 0" >/dev/null && EXIT=true || EXIT=false
if [ -z "$(cat $BOOTFILE | grep "[Ii]nit\.d")" ] ; then
if [ "$BOOTFILE" = "/system/bin/debuggerd" ] ; then
if [ ! -f /system/bin/debuggerd_real ] ; then
mv -f $BOOTFILE /system/bin/debuggerd_real
echo "#!/system/bin/sh" > $BOOTFILE
else
sed -i '/debuggerd_real/d' $BOOTFILE
fi
else
mv -f $BOOTFILE "$BOOTFILE.bak"
cp -pf "$BOOTFILE.bak" $BOOTFILE
if ($EXIT) ; then sed -i '/^exit 0/d' $BOOTFILE ; fi
echo "" >> $BOOTFILE
fi
echo "# Init.d support" >> $BOOTFILE
echo 'SU="$(ls /su/bin/su 2>/dev/null || ls /system/xbin/su) -c"' >> $BOOTFILE
echo 'mount -o rw,remount /system && SU="" || eval "$SU mount -o rw,remount /system"' >> $BOOTFILE
echo 'eval "$SU chmod 777 /system/etc/init.d"' >> $BOOTFILE
echo 'eval "$SU chmod 777 /system/etc/init.d/*"' >> $BOOTFILE
echo 'eval "$SU mount -o ro,remount /system"' >> $BOOTFILE
echo 'ls /system/etc/init.d/* 2>/dev/null | while read xfile ; do eval "$SU /system/bin/sh $xfile" ; done' >> $BOOTFILE
if [ "$BOOTFILE" = "/system/bin/debuggerd" ] ; then
echo '/system/bin/debuggerd_real [email protected]' >> $BOOTFILE
set_perm 0 2000 755 $BOOTFILE $BOOTCON
else
if ($EXIT) ; then echo "exit 0" >> $BOOTFILE ; fi
chcon u:object_r:$BOOTCON:s0 $BOOTFILE
fi
mkdir -p /system/etc/init.d
echo "#!/system/bin/sh" > /system/etc/init.d/00test
echo "# Init.d test" >> /system/etc/init.d/00test
echo 'echo "Init.d is working !!!" > /data/initd_test.log' >> /system/etc/init.d/00test
echo 'echo "excecuted on $(date +"%d-%m-%Y %r")" >> /data/initd_test.log' >> /system/etc/init.d/00test
echo "#!/system/bin/sh" > /system/etc/init.d/99SuperSUDaemon
echo "/system/xbin/daemonsu --auto-daemon &" >> /system/etc/init.d/99SuperSUDaemon
set_perm 0 0 777 /system/etc/init.d
set_perm 0 0 777 "/system/etc/init.d/*"
fi
exit 0
Thanks for the answer. Will try it asap and give you feedback.
Envoyé de mon GT-I9505 en utilisant Tapatalk
hello @_alexndr
So tried again with the sh modified script, but same thing. Same error and no initd installed unfortunately
If you have any other advice, i really thank you in advance.
i tried something different. I keep your original zip file, and put it in tools/initd folder in my custom rom
Then i added this in the updater script:
ui_print("@ Add init.d support");
package_extract_dir("tools/initd", "/tmp/initd");
run_program("/sbin/busybox", "unzip", "/tmp/initd/initd.any.stock.1.3.zip", "META-INF/com/google/android/*", "-d", "/tmp/initd");
run_program("/sbin/busybox", "sh", "/tmp/initd/META-INF/com/google/android/update-binary", "dummy", "1", "/tmp/initd/initd.any.stock.1.3.zip");
ui_print("--> Init.d Installed");
IT WORKS with this
Thanks
great job
You sir are an animal. This script is intelligently designed
Deleted
Hey, Firstly thanks for all your work!
I've not tried this yet but I'm working on stock based ROM nd I want to enable to init.d support in it.
I've used the SuperR's Kitchen to enable the init.d support in the kernel nd I could find the script in the kernel too. Not sure if it'll work or not as I haven't tested in yet. So I hope you can tell me if I need to enable this way too or not,
Thanks.
@_alexndr
Thanks a lot
Confirmed Working on Samsung Galaxy S5 G900H
OS: Stock Deodexed Marshmallow 6.0.1 with GreenApple Kernal