Hello Xda community, I open this thread after two days of reading and trying different ways to solve my problem.
My Nexus 5 runs Android 5.1.1 which I got OTA, I've never Rooted, installed any ROMS or done anything that might violate the system or the warranty.:angel:
Few days ago I downloaded some crappy program to my PC called Wondershare Dr.Fone (BURN IN HELL !!!) that was suppose to recover my deleted photoes from the Nexus, during the process of syncing etc.. it asked me to open developer settings and turn ON debugging mode.. which I did... and after about 30-40 minutes of "working" I realized it FROZE
The program didn't have any "Abort" button, and it was already late, so I just disconnected my Nexus, and after a moment it restarted and went into Bootloop
First I waited about an hour to realize it was infinite, then I tried going into Recovery Mode and deleting Cache Partition then restarting... it also didn't help, whenever I tried to turn it off, it was just turning on again, showing the Google Logo and then bashing those infinite Spinning Google Ballz in my face (I can turn off the phone using the Bootloader which works just fine, but it doesn't helps with the bootloop)...
The next whole day I was trying to at least recover my photos and videos, hoping that I can use the ADB to Pull the Camera folder out... I tried to install maaaany Google USB drivers following the steps of dozen tutorials, downloaded the SDK Manager and tried to install them thru Google server, and even Installed Naked Drivers with Windows 8.1 Signature Check Disabled... and tried it on 3 different PCs (win 8.1 and 7) the result was the same: Nexus 5 remained invisible until I Clicked in recovery mode "ADB Sideload.." in which case my Nexus 5 appeared in Device manager under Other Devices section (which let me install the drivers) otherwise it was invisible for my PCs...
The problem: whenever I was lunching the ADB from it's folder and typing "adb devices" I saw some sort of serial number, and "Sideload" next to it (while in other tutorials people have the word "Device" instead) and every command such as "adb usb" or "adb pull /sdcard/" or "adb pull /Camera/" result in "Error: closed" :crying:
In despair I tried to Factory reset my Nexus, and after about an hour of wiping, it allowed me to reboot which ended up in another infinite Bootloop....
I don't know what to do now, I don't live in the States and don't have warranty, I feel it's really unfair how after preserving my Nexus and it's Stock OS for so long... some Dr.fone bull**** broke it...
Please help me save my Nexus
Yea well... I knew nobody would give a crap in here... >.>
iJutsu said:
Yea well... I knew nobody would give a crap in here... >.>
Click to expand...
Click to collapse
[sarcasm]Way to stay positive.[/sarcasm]
You said you've tried doing a factory reset and that your system detects your device while in sideload mode on the stock recovery, correct? If so, have you at least tried sideloading the stock system update? Could be worth a shot at least.
Or with the driver issues, have you looked into opening device manager and see if it reads any kind of connection when hooked up not under sideload?
When adb is in sideload mode, you cant use any of the normal adb operations, like pull or push.
davehasninjas said:
You said you've tried doing a factory reset and that your system detects your device while in sideload mode on the stock recovery, correct? If so, have you at least tried sideloading the stock system update? Could be worth a shot at least.
Or with the driver issues, have you looked into opening device manager and see if it reads any kind of connection when hooked up not under sideload?
Click to expand...
Click to collapse
Factory reset didn't give any results, just destroyed any hope of recovering the photos I had onboard...
The system did detect my device for some time only when I activated the "ADB Sideload.." in the Recovery mode, but it wasn't same as in most guides and tutorials I've seen... When I typed the command "adb devices" it showed "4bd...serial.. Sideload", while according to tutorials it should be detected as "4bd.... Device"... Also I think the phone should get detected even without pushing the "Adb Sideload"... but the main problem is that every command results in "Error: Closed" so I can Pull or Push or Sideload anything since it's always same error"... which made me think perhaps the drivers aren't Okey, but I tried every Nexus 5/Google driver I could find, and I really doubt it's the drivers fault.
As I said the device remains invisible both in Device Manager and in Devices and Printers, until I click the Adb Sideload on the Nexus...
Factory Reset didn't work even tho I've never did any root or install Stock ROM or Kernel or anything of that sort, makes me wonder if that Dr.Fone crap app actually bricked my phone...
Thanks for trying to help
beekay201 said:
When adb is in sideload mode, you cant use any of the normal adb operations, like pull or push.
Click to expand...
Click to collapse
Aw... that's what I suspected... But activating the ADB sideload is the only way to make my Nexus 5 visible when I type "adb devices".... Does the fact that my PC can see it during ADB Sideload means that the Drivers are installed correctly? what may be the problem then? uff..
Have u tried this
Since you dont mind losing your data, I guess u already did a factory reset, I seriously suggest trying this guide. Read carefully. It worked perfectly for me which was in bootloop after 5.1.1 update.
http://forum.xda-developers.com/google-nexus-5/help/nexus-5-stuck-boot-loop-lollipop-t3098632
Related
Phone: Hauwei Ascend 2
Model: M865
Carrier: Cricket
Ok, I'm hoping someone on here can help me with my problem. I have already been to this thread, tried every trick that was posted, and am still having problems. I rooted my phone and uninstalled some apps. I accidently deleted one app (I believe it was the Dialer program.) After that I would get a error message that poped up every couple of seconds that said I needed to force close a program. So I decided to do a factory reset of my phone (and no I didnt back anything up.) Now my phone wont go past the setup screen (touch the android to begin.) I eventually found out about the adb and fastboot (I'm a noob to all of this. Good with computers, not so much with phones) installed them, and after some tinkering got them to work.
Now I'm stuck. when I run the command 'adb devices' it will show my phone, but only if it is in bootloader mode. It also shows up in device manager. If I try to boot the phone to the set up screen now suddenly nothing shows up. It dosent show anything in device manager, nothing in comand prompt with the "adb devices' command. I have tried uninstalling the drivers and reinstalling them but windows does this automatically (and it says its successfull)
Thats problem 1. Problem 2 is that when I try running the 'fastboot devices' comand nothing shows up. which is just grrrrr...
After messing with this for two days I tried the flash_image method. I'm not getting anywhere with that. Anyone know a good tut for that with my device?
I just want my dam phone back, hopefully someone on here can help me with this...
hi im pretty new here a friend of mine gave me her lg c800 mytouch to try and fix it for her.. not sure what she did she said she rooted the phone and the root was successful but i have a good idea that she doesnt know what she was doing..i will post a pic of the error screen im getting. but it says
E:Cant find misc
E:cant find misc
Finding update package...
E:unknown volume for path [sd:/download/adb_fastboot_and_other_tools.Zip]
E:Cant mount SDCARD:/download/adb_fastboot_and_other_tools.zip
Installation aborted
facory reset failed
restart factory reset..
now im far from a pro at this i know a lil more about computers and Ios devices..but ive rooted a few phones and to me it looks like she unzipped adb fastboot on her phone from her sd card??
ive tried holding F..A..vol down..and power..Nothing..
ive tried volume up .volume down and power still nothing..
BUT if i hold E..vol UP and power it brings me to a white screen that says S/W update
the big problem is the phone wont stay on long enough to do anything on the computer it stays on 3 sec. then reboots to same screen (computer says phone is unplugged) then phone just keeps restarting.
but the phone WILL stay on when i put it on the S/W update screen..but computer wont recognize the phone at all on that screen
ive tried the adb and fastboot commands but the phone wont stay recognized..it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
well thanks ahead of time if anyone has any input or solution
and hopefully all this will make sense to someone lol
i think this pic will work.. if not ill try again
any ideas please?? or am i completely out of luck?
When you say:
delilah25 said:
it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
Click to expand...
Click to collapse
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
post-mortem said:
When you say:
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
Click to expand...
Click to collapse
Yes In Adb device list it shows the phone and then says recovery..but after that I don't have enough time to type any other commands ..the phone is also recognized in "my computer" as removable device then when the phone restarts seconds later it says device unplugged ..and just keeps restarting on its own till I remove the battery...I just read on the forum in a post that Adb will recognize the phone if it's off but I remove the battery and put it back in and plug in USB and phone turns on and keeps restarting won't even let me turn it off!! I'm losing patience with this thing lol
But I don't get why the error mentions fastboot? Not my phone so if it's not fixable I don't really care but I'm just the stuborn type when it comes to fixing electronics ..again thanks ahead of time to anyone that helps cuz I'm completely lost on this one
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
i have the same problem
post-mortem said:
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
Click to expand...
Click to collapse
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
diabolus ae said:
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
Click to expand...
Click to collapse
Normally, if you want to flash a custom recovery through fastboot, people will tell you to run 2 commands:
fastboot flash recovery nameofimagefile.img
fastboot reboot recovery
Since you don't have time to execute those 2 commands, you can tell it to just boot from the .img file, without flashing over your current recovery. (This is actually proper form, as you can test if the .img file works properly without damaging your existing recovery.) The way you do that is to 1st copy a recovery .img file to the root of your SD card, then execute the following 1 command:
fastboot boot nameofimagefile.img
Since you only have ~3 seconds, type the command in, and wait for the right instant to hit enter on the keyboard. If the command is successfully sent to the phone, it will reboot into that .img.
See if that works for you. Good luck.
NS4G
Will boot to fastboot and recovery
CWMR Touch 6.0.1.0
Situation:
My device started bootlooping after about a week of random restarts and freezes. I had just flashed BlackBean and now this, so I decided I was just going to flash a new ROM/Kernel combo. I remembered someone saying I should format /system to install the specific ROM, but I'm fairly sure I formatted /boot along with it, like an idiot. FYI - Fast Charge and a build.prop tweak to set permissions on boot was enabled when this happened. So then I try and flash a new ROM/Kernel combo to fix my bootloop and it wouldn't read the sdcard afterwards. Now it boots straight to fastboot everytime. Toolkit seems to be able to do some things via USB control like reboot the bootloader, but it does not detect an ADB device when I run the driver check or try to restore my CWM backup. I ran the stock+unroot option in Toolkit (was going to send it in thinking the sdcard thing was hardware at first) and it seemed to have went through the whole process correctly... Until the end when it did not reboot automatically like it should have. After doing this, I now get "STANDARD_SET_CONFIGURATION" on the phone when I insert the USB cord while in fastboot. It did not do this before, whether it is the new cord or the flash I do not know. My old cord WAS having problems with data though.
Problem:
I now have no USB debug or SDcard functionality. I assume because of missing files on /boot. I can mount nothing (except cache, but the PC doesn't recognize) without getting a "can't mount" error. This puts a serious dent in my novice ability to fix it. Anything in Toolkit that runs via ADB commands doesn't seem to work properly because it says the device is not in debug mode. PDAnet USB Drivers seemed to install without a hitch and device is recognized on my PC.
Errors:
When trying to mount ANYTHING except the cache while in CWM, I only get: "E:/ Can't mount /sdcard/".
If I try to mount USB storage I get: "E:/ Unable to write to ums lunfile (No such file or directory)Error mounting /sdcard!"
If I try to run any one click methods that use ADB I get: "Daemon not running* No ADB device detected. Make sure you have debugging enabled on your phone"
The log in CWM recovery always shows: "I: Set boot command "" failed to open /sys/class/android_usb/android0/state: No such file or directory" over and over (as many times as I tried to mount something while in recovery for that session)
Questions:
Do you think USB Fast Charge or having the build.prop tweaks enabled could have done something to USB debug? Is there a way to at least just fix the USB Debug problem? Am I correct in assuming that wiping the /system along with the /boot folder is what caused me to not be able to mount the /sdcard to flash another ROM? Is there a way to push the files I need onto the device to restore sdcard function and flash another zip?
Also, what fastboot do I need to be in to do the StockROM+Unroot method in the Toolkit? I have two. Only hold Vol Up/Power takes me to "FASTBOOT". Holding both Volumes+Power puts me into "FASTBOOT - NO BOOT OR RECOVERY IMG"
What is the difference?
I only ask because the Toolkit wants me to hold both volumes and up to get into bootloader mode, but they describe a big green "Start" with an android lying on it's back, mine does not look like that. It simply looks like regular fastboot, but says "FASTBOOT - NO BOOT OR RECOVERY IMG" instead.
It seems you messed with the ROM zip with some tool. Sorry could read your lengthy post completely.
I just want to know one thing clearly, what is the problem basically? where are you stuck?
Edit - Made it as concise as I could, hope it helps. Sorry for length.
Basically, the phone has a formatted /boot, /data, /sdcard, /system, dalvik cache, and I can't seem to use any of the flashing tools via Toolkit in Fastboot mode because the Toolkit says it "cannot find ADB device" please enable "debug" mode. Even when I run the driver check, it says ADB Device Not Found. Though I do have some control of the device via USB (I can use Toolkit to soft reboot from the bootloader) telling me my drivers are probably OK? I couldn't flash any ROM zips (or anything, even backups on the device) because I lost /sdcard functionality.
After a bunch of reading last night, it seems I want to Push a backup of /system and /boot onto the device, which should then restore USB functionality and allow me to flash a ROM... Right?
DizturbedOne said:
Edit - Made it as concise as I could, hope it helps. Sorry for length.
Basically, the phone has a formatted /boot, /data, /sdcard, /system, dalvik cache, and I can't seem to use any of the flashing tools via Toolkit in Fastboot mode because the Toolkit says it "cannot find ADB device" please enable "debug" mode. Even when I run the driver check, it says ADB Device Not Found. Though I do have some control of the device via USB (I can use Toolkit to soft reboot from the bootloader) telling me my drivers are probably OK? I couldn't flash any ROM zips (or anything, even backups on the device) because I lost /sdcard functionality.
After a bunch of reading last night, it seems I want to Push a backup of /system and /boot onto the device, which should then restore USB functionality and allow me to flash a ROM... Right?
Click to expand...
Click to collapse
Your storage memory is completely inaccessible?
Yes, no way to access it via CWM. ADB stuff does not work either. It seems Fastboot stuff DOES. I would like to find a boot.img and system.img to flash via Toolkit (I believe toolkit uses fastboot or odin for these) to see if that would work for me. Any ideas?
It seems like the easy nature of unlocking, rooting, and customizing this phone leads to less of these kind of discussions, I can usually find many files and discussions pertaining to this for HTC phones, but never for this phone.
My bootloader version is KE1, but my baseband version is LF2, makes no sense to me.
The KE1 bootloader was when I was on ICS, but the LF2 baseband was from Jellybean... wth?
Do you think the time I flashed "stock+unroot" on the toolkit that it only partially took? (I did try to back it up to ICS because the Jellybean download didn't work). It seemed as if it flashed everything via fastboot, but never restarted at the end and still won't boot when done.
same problem kinda
i am having the same problem as this with my nexus. mine started after i downloaded Jellybean.it worked fine for about 1 month. i had changed nothing but when i would change my battery or restart my phone it would get stuck at the google screen every now and then, then it started more often. i could normally pull the battery and restart it and it would work after a couple of times doing that. but now this last time i tried that the phone wouldnt go past google screen at all. i can access my clockwork mods recovery but when i try to install zip from sd i get the error cant load sd i have tried everything i know and cant get nothing to work. please help. i miss my nexus this prevail is too slow and small...
Your drivers don't seem to be installed properly.
Get that right, then you can reflash your recovery via fastboot, then you can mount your usb and transfer anything (rom kernel gapps etc etc)
Edit: oh and Bamamac82, that's not the same problem at all. Create a topic of your own.
polobunny said:
Your drivers don't seem to be installed properly.
Get that right, then you can reflash your recovery via fastboot, then you can mount your usb and transfer anything (rom kernel gapps etc etc)
Edit: oh and Bamamac82, that's not the same problem at all. Create a topic of your own.
Click to expand...
Click to collapse
@ polobunny - There is no way for me to install them more properly if I can't go into debug mode to install them though... I wiped out ALL drivers and manually reinstalled the drivers from PDAnet that had previously worked perfectly on my device. But now it never installs as Nexus S, only as Samsung ADB Interface or some such. I've tried it with PDAnet drivers and the Samsung drivers and have followed every driver install guide on the web... Any other suggestions on how to do this properly? I was even thinking of installing a Google SDK just to see if the drivers would work better...
@ Bamamac82 - Yes, that is pretty much the exact same problem, with the exception of the fact that you didn't wipe the /boot partition as I did. But yeah, I installed a JB ROM, it got a few random restarts, froze up twice, then one morning got stuck in a bootloop after I pulled the battery on a freeze up. Not having a working USB cord at the time botched me, because I couldn't get my drivers reliably installed before anything happened, I was using AirDroid because my OEM cable wasn't working with data reliably.
I totally thought the sdcard problem was because I formatted /boot in a hasty ROM flash though. Could I be wrong here?
DizturbedOne said:
There is no way for me to install them more properly if I can't go into debug mode to install them though... I wiped out ALL drivers and reinstalled the drivers from PDAnet that had previously worked perfectly on my device. But now it never installs as Nexus S, only as Samsung ADB Interface or some such.
And Bamamac82 has the exact same problem, with the exception of the fact that he didn't wipe the /boot partition as I did. But yeah, I installed a JB ROM, it got a few random restarts, froze up twice, then one morning got stuck in a bootloop after I pulled the battery on a freeze up.
I totally thought the sdcard problem was because I formatted /boot in a hasty ROM flash though. Could I be wrong here?
Click to expand...
Click to collapse
When you're in fastboot mode on your phone, on your windows PC point the unknown device or the device with an exclamation/question mark to the path where the .inf for the drivers are located. If it still doesn't detect it, you can always try and force it to install a certain device (adb debug bridge or something of the sort).
Once that is done as I said you won't have any problem fastboot'ing to your phone and doing the other steps. Windows drivers and especially the adb drivers can be finnicky.
Your SDcard problem has nothing to do with the fact your formatted boot partition though, those are not linked.
Edit: Oh and I know there is some people, namely with NS4Gs, that had issues with the drivers. I believe for some reason there's some missing IDs in the inf making it impossible to install automatically. Forcing it should work though.
Polobunny thank you so much for your help so far. My device has been softbricked for a week and I'm using a HTC Hero for now! It's atrocious. I'm going to try as you said when I get home tonight and will update if fastboot allows me to flash after that.
Any idea where I can get all the .img's I need? I can only find the complete .tgz for IMM76D (which is fine for now just want it back to working state) and don't know how to extract .img's from it. Can't even find the complete .tgz for JRO03R though, the link is always down. At this point, all I want is a factory img to start from so I can upgrade to JRO03R, root it, and then make a fresh NAND backup from there.
If I were you, I would download Odin, a factory image from Google (just search nexus s factory image), the SDK tools (Google it) and would "reset" the phone.
You will easily find a guide for Odin. Then you'll just have to follow it and your nexus should be fine (but it will be factory reseted and you will have lost all your data )
Sent from my Nexus S using xda premium
Sorry guys, have been putting late hours in at work and haven't had much time until this weekend.
@BenHeng, that's what I am about to look into tonight. I didn't want to learn an entirely new aspect to restore this, I have been limited on free time and am starting to think it will be less hassle than dealing with this.
Only caveat to that, is that I definitely would like to know what happened to cause the SDCARD problem, because that was the main problem that got to me here, would like to prevent that from happening again.
ADB
Make sure ADB debuging is checked under Developer options
localpagefirst said:
Make sure ADB debuging is checked under Developer options
Click to expand...
Click to collapse
Please read the thread before replying.
@polobunny - I did a complete manual install of the RAW drivers, and got it to recognize properly as a Nexus S, as it did when USB Debug and everything worked correctly... But it still does not recognize it as an ADB device when running a driver check.
Is it safe to continue forward with a flash via ODIN in this state?
Hi, I don't understand why you want to use ODIN, fastboot commands still don't work after you installed correctly your driver?
Anyway you can find all (new and old) originals google image here:
http://www.randomphantasmagoria.com/firmware/nexus-s/
Listen mate, the best way would be to flash the factory image via fastboot in bootloader mode. Follow this simple step to step guide.
If you have any issues. post them there on the blog post itself :good:
DizturbedOne said:
Please read the thread before replying.
@polobunny - I did a complete manual install of the RAW drivers, and got it to recognize properly as a Nexus S, as it did when USB Debug and everything worked correctly... But it still does not recognize it as an ADB device when running a driver check.
Is it safe to continue forward with a flash via ODIN in this state?
Click to expand...
Click to collapse
Please, please don't use a shi**y 1-click package thing. There's no driver check to be done other than using adb and typing "adb devices". Do it manually and report the results. It should show your adb device ID, a long string of number and letters.
polobunny said:
Please, please don't use a shi**y 1-click package thing. There's no driver check to be done other than using adb and typing "adb devices". Do it manually and report the results. It should show your adb device ID, a long string of number and letters.
Click to expand...
Click to collapse
I get nothing when I do that. It says "List of devices attached" and a blank line underneath. When I plug the USB in during fastboot I get "STANDARD_SET_CONFIGURATION" at the bottom, which I never get until I install the drivers.
It seems as if the computer must recognize the device in debug mode in some way to properly install the drivers.
Why is my sdcard partition unable to be written to? This never would have been a problem as I always keep a couple backup ROM's on the phone. Either way, it seems as if all of this is for nothing if the phone will not allow me to read/write to the memory in the device.
So last night I tried to install CM11 and unfortunately forgot to make sure it was a clean install. Got stuck on boot animation and after remembering what I did wrong, tried to get back into recovery, however this is my first time trying to install CM on this device so was confused when the power button wasn't the "select" button to get me into recovery...so I ended up messing around for a bit and now I'm screwed.
My phone doesn't show up as a storage device on my computer and only recognises it as an "Android" device or "Fastboot Falcon S". I have tried reinstalling the Motorola drivers and I'm just at a loss. :crying:
I can access recovery on my phone but when I attempt to install a zip from sdcard it says "E: Can't mount /sdcard". Which means I can't install any Roms. I did some research and apparently I can push a stock rom to my phone, but this leads me to my next problem.
I can't seem to get adb to recognise my phone. I feel like I have tried everything but I have reached the extent of my knowledge on this matter and It's starting to hurt my brain. I saw mention of using "Eclipse" but when I try to run it I get an error message about Java.
Edit: When I say adb doesn't recognise my phone, it doesn't show up when I type the command "adb devices" and whenever I attempt an adb command such as "adb push" or "adb shell" I get an error message. I can however use all fastboot commands, which were a big help.
I honestly am completely and totally baffled on how to recover from this total f*ck up, so if any of you geniuses could help me save my device I would be forever grateful. I'm not sure what information I should supply you with as this is my first post. So please tell me what you need and I'll try me best to get you the info.
Thank you!
If you can boot into fastboot mode, just flash stock firmware of your region. There are many guides in the general and q/a sections. Just read them properly and remember to use mfastboot.
Sent from my Moto G using Tapatalk
You don't need adb, but mfastboot, which are two different things.
Let your brain rest few hours and then read the guides how to flash stock firmware.
You are fantastic. Thank you so much!
I can finally use it again.....and attempt to flash CM11 again, hopefully this time without screwing it up.
I owe you!
Ok so I usually do searching (in this case a few hours of searching), to get help but I am in a very unique situation. Long story.
I tried updating my rooted nexus 5 to android 4.4.3 via CWM Recovery. It seemed to be taking an extremely long time to flash the rom. (I think it was a mod stock rom with root) So I shut it down, of course it wouldnt boot. So I did a whole wipe and reset in CWM, nothing. So I did it using Command prompt with one of the guides here. Worked great! Got it running, apps downloading. Then I noticed that my storage was cut in half. (It said I had 12 gigs and not 28, I have a 32 gig nexus 5) I read up and found someone who re locked, then unlocked hit boot loader. So I did that using Command Prompt. Now im stuck in a boot loop. Here's the kicker, When you lock the bootloader, the phone gets wiped. Well there went my USB debugging mode. So now, Im stuck in a boot loop and no way to get out. Ive tried using CWM to factory reset. Nothing.
I think I may have to get a new phone. From what Ive found theres no other way to get usb debugging mode on unless your in the phone. Without that, I cant do anything with command prompt. I dont post really at all, just read. So for me to do this means I am really stuck. Any advice or ideas would be greatly appreciated! I have all the latest drivers and everything.
Can you access the recovery? If so, format cache partition and then perform a factory reset and try to boot. If it fails, download the factory images and flash it. Factory images are flashed in fastboot mode and doesn't require a working OS or USB Debugging.
Follow the links in my signature and read everything mentioned it those threads. I'm sure your phone will be up and running in no time!
Thanks for the quick reply. Yes I can get into clockwork mod. Ive tried wiping data factory reset, wiping dalvik and cache partitions. When I do a factory data reset, I get this:
Formatting data /data...
error mounting /data...
Skipping format...
Formatting /cahce
Formatting /sd-ext...
E: Unknown volume for path [/sd-ext]
Formatting /sdcard/.android_secure!
Skipping format...
Data Wipe Complete
Still in boot loop.
zeroshift11 said:
Thanks for the quick reply. Yes I can get into clockwork mod. Ive tried wiping data factory reset, wiping dalvik and cache partitions. When I do a factory data reset, I get this:
Formatting data /data...
error mounting /data...
Skipping format...
Formatting /cahce
Formatting /sd-ext...
E: Unknown volume for path [/sd-ext]
Formatting /sdcard/.android_secure!
Skipping format...
Data Wipe Complete
Still in boot loop.
Click to expand...
Click to collapse
Dumb question, but do you have access to your latest back up on your phone?
Boot into recovery and adb push a rom zip
Sent from my Nexus 5 using Tapatalk
zeroshift11 said:
Ok so I usually do searching (in this case a few hours of searching), to get help but I am in a very unique situation. Long story.
I tried updating my rooted nexus 5 to android 4.4.3 via CWM Recovery. It seemed to be taking an extremely long time to flash the rom. (I think it was a mod stock rom with root) So I shut it down, of course it wouldnt boot. So I did a whole wipe and reset in CWM, nothing. So I did it using Command prompt with one of the guides here. Worked great! Got it running, apps downloading. Then I noticed that my storage was cut in half. (It said I had 12 gigs and not 28, I have a 32 gig nexus 5) I read up and found someone who re locked, then unlocked hit boot loader. So I did that using Command Prompt. Now im stuck in a boot loop. Here's the kicker, When you lock the bootloader, the phone gets wiped. Well there went my USB debugging mode. So now, Im stuck in a boot loop and no way to get out. Ive tried using CWM to factory reset. Nothing.
I think I may have to get a new phone. From what Ive found theres no other way to get usb debugging mode on unless your in the phone. Without that, I cant do anything with command prompt. I dont post really at all, just read. So for me to do this means I am really stuck. Any advice or ideas would be greatly appreciated! I have all the latest drivers and everything.
Click to expand...
Click to collapse
Try changing to TWRP recovery by using - fastboot flash recovery recoveryname.img
Format data, factory reset your devices in TWRP,
Then, install any rom using adb sideload in TWRP
Oh and if you're booting in any way possible, you're never screwed ?
Sent from my Nexus 5 using Tapatalk
zeroshift11 said:
Ok so I usually do searching (in this case a few hours of searching), to get help but I am in a very unique situation. Long story.
I tried updating my rooted nexus 5 to android 4.4.3 via CWM Recovery. It seemed to be taking an extremely long time to flash the rom. (I think it was a mod stock rom with root) So I shut it down, of course it wouldnt boot. So I did a whole wipe and reset in CWM, nothing. So I did it using Command prompt with one of the guides here. Worked great! Got it running, apps downloading. Then I noticed that my storage was cut in half. (It said I had 12 gigs and not 28, I have a 32 gig nexus 5) I read up and found someone who re locked, then unlocked hit boot loader. So I did that using Command Prompt. Now im stuck in a boot loop. Here's the kicker, When you lock the bootloader, the phone gets wiped. Well there went my USB debugging mode. So now, Im stuck in a boot loop and no way to get out. Ive tried using CWM to factory reset. Nothing.
I think I may have to get a new phone. From what Ive found theres no other way to get usb debugging mode on unless your in the phone. Without that, I cant do anything with command prompt. I dont post really at all, just read. So for me to do this means I am really stuck. Any advice or ideas would be greatly appreciated! I have all the latest drivers and everything.
Click to expand...
Click to collapse
First of all you most certainly not screwed.
Now what you have done is oem unlock without google stock recovery.
For the process of wiping userdata to complete , after you type fastboot oem unlock and restart the phone will boot to recovery and execute the wipe.
Because you have cwm recovery the process is stuck and hence the bootloop.
You need to boot to bootloader and type : fastboot -w (press enter) ,it will erase userdata and cache, and restart to system.
You can also try "fastboot format data " and "fastboot format cache" .but if -w worked then no need for that.
If you still stuck in bootloop then you need to flash the stock factory img.
zeroshift11 said:
Thanks for the quick reply. Yes I can get into clockwork mod. Ive tried wiping data factory reset, wiping dalvik and cache partitions. When I do a factory data reset, I get this:
Formatting data /data...
error mounting /data...
Skipping format...
Formatting /cahce
Formatting /sd-ext...
E: Unknown volume for path [/sd-ext]
Formatting /sdcard/.android_secure!
Skipping format...
Data Wipe Complete
Still in boot loop.
Click to expand...
Click to collapse
No need to worry. Download the 4.4.3 factory images and follow the guide "How to flash factory image" which is linked in my signature.
Or, if you want to try out a custom rom, you can push the rom.zip and gapps.zip to your device using "adb push" or sideload it in recovery.
I really appreciate the help guys. Ok I would love to try these, but, I cant do anything with the command prompt. It always says "waiting for device"
I have the latest good drivers installed from ADB. In my device manager the Yellow ! triangle is there beside the android bootloader interface. Ive tried uninstalling the drivers and the software and doing it again and nothing. Mind you, when I do that, it shows up as samsung android devices so that could be a a problem. Im going to try and work on that. Any other ideas?
zeroshift11 said:
I really appreciate the help guys. Ok I would love to try these, but, I cant do anything with the command prompt. It always says "waiting for device"
I have the latest good drivers installed from ADB. In my device manager the Yellow ! triangle is there beside the android bootloader interface. Ive tried uninstalling the drivers and the software and doing it again and nothing. Mind you, when I do that, it shows up as samsung android devices so that could be a a problem. Im going to try and work on that. Any other ideas?
Click to expand...
Click to collapse
I had a similar problem and solved it by going to update driver software, browes my computer, let me pick from a list on the computer. Then find the android adb interface
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
I had a similar problem and solved it by going to update driver software, browes my computer, let me pick from a list on the computer. Then find the android adb interface
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Done that. A few times. Says it's up to date. Problem for me that I can see so far, any tutorial on how to unlock bootloader or side load, requires USB debugging, which is turned off. Thats why I get the waiting for device message in Command Prompt.
zeroshift11 said:
I really appreciate the help guys. Ok I would love to try these, but, I cant do anything with the command prompt. It always says "waiting for device"
I have the latest good drivers installed from ADB. In my device manager the Yellow ! triangle is there beside the android bootloader interface. Ive tried uninstalling the drivers and the software and doing it again and nothing. Mind you, when I do that, it shows up as samsung android devices so that could be a a problem. Im going to try and work on that. Any other ideas?
Click to expand...
Click to collapse
Are you in fastboot mode while running fastboot commands? If so,
Uninstall each and every driver installed on your computer. Download the full android sdk from here: http://developer.android.com/sdk/index.html
Open SDK manager and download all the required tools. Also, download the usb_driver from within the sdk manager. Now connect your device to your computer and let it detect. Now, open device manager, right click on the recognized device (Name of the nexus device may be different. Don't worry). Select update driver. Now navigate to the usb_driver folder which you had downloaded previously and select it. Once the driver is updated, windows might reconnect the device. (Ding ding sounds). Once it does, open cmd from the fastboot folder and try running the commands again.
zeroshift11 said:
Done that. A few times. Says it's up to date. Problem for me that I can see so far, any tutorial on how to unlock bootloader or side load, requires USB debugging, which is turned off. Thats why I get the waiting for device message in Command Prompt.
Click to expand...
Click to collapse
No, pick it yourself, see below the search for driver software
Sent from my Nexus 5 using XDA Free mobile app
vin4yak said:
Are you in fastboot mode while running fastboot commands? If so,
Uninstall each and every driver installed on your computer. Download the full android sdk from here: http://developer.android.com/sdk/index.html
Open SDK manager and download all the required tools. Also, download the usb_driver from within the sdk manager. Now connect your device to your computer and let it detect. Now, open device manager, right click on the recognized device (Name of the nexus device may be different. Don't worry). Select update driver. Now navigate to the usb_driver folder which you had downloaded previously and select it. Once the driver is updated, windows might reconnect the device. (Ding ding sounds). Once it does, open cmd from the fastboot folder and try running the commands again.
Click to expand...
Click to collapse
Doing that again. Maybe I missed a step last time but I tried that already a few times. Im trying again.
zeroshift11 said:
I really appreciate the help guys. Ok I would love to try these, but, I cant do anything with the command prompt. It always says "waiting for device"
I have the latest good drivers installed from ADB. In my device manager the Yellow ! triangle is there beside the android bootloader interface. Ive tried uninstalling the drivers and the software and doing it again and nothing. Mind you, when I do that, it shows up as samsung android devices so that could be a a problem. Im going to try and work on that. Any other ideas?
Click to expand...
Click to collapse
zeroshift11 said:
Done that. A few times. Says it's up to date. Problem for me that I can see so far, any tutorial on how to unlock bootloader or side load, requires USB debugging, which is turned off. Thats why I get the waiting for device message in Command Prompt.
Click to expand...
Click to collapse
I think the drivers aren't installed properly. My phone comes up as Android Device, then in the drilldown Android Composite ADB Interface.
I know you've said you've done it many times, but try reinstalling the drivers manually. Go to whatever it's listed as under Device manager->Right click->Update Driver. I can't remember the exact prompts, but basically don't let it look online. Tell it that you want to install drivers you have on your computer. Navigate to where ever you have driver files and install it.
Try different USB ports/cables. Computers are weird. Sometimes this actually works.
Ok so I uninstalled the drivers from the device manager, went to control panel did it there as well. I have the SDK on my desktop, I installed the google drivers. But I also had downloaded just the google driver manually from their website. Unrared it, plugged my phone in, it detected the phone, I manually updated drivers to the ones I got from the google page. It updated. I was in bootloader mode, and I get that the drivers installed successfully, then it also says Device could not start (error code 10). Anything I type into command prompt still says waiting for device.
Johmama said:
I think the drivers aren't installed properly. My phone comes up as Android Device, then in the drilldown Android Composite ADB Interface.
I know you've said you've done it many times, but try reinstalling the drivers manually. Go to whatever it's listed as under Device manager->Right click->Update Driver. I can't remember the exact prompts, but basically don't let it look online. Tell it that you want to install drivers you have on your computer. Navigate to where ever you have driver files and install it.
Try different USB ports/cables. Computers are weird. Sometimes this actually works.
Click to expand...
Click to collapse
Wow........switching usb ports worked..............Thanks so much! Ok so bootloader unlocked. Now Ill try factory reset, if nothing Ill flash original recovery and do it again. After I sideload the stock zip.
Thanks to everyone here my phone is back up. Who knew the USB would have been the issue I was having. Its up, but again my storage was cut in half. Back to 12 gigs. So Im going to look for a fix unless anyone here has it haha.
zeroshift11 said:
Thanks to everyone here my phone is back up. Who knew the USB would have been the issue I was having. Its up, but again my storage was cut in half. Back to 12 gigs. So Im going to look for a fix unless anyone here has it haha.
Click to expand...
Click to collapse
Clear cache and factory reset in the stock recovery
Sent from my Nexus 5 using XDA Free mobile app