Related
Hi Folks.
Ok here is my situation, I have a rooted and unlocked TF700.
I flashed Zeus 4 and all worked well, then flashed (after full wipe) PARANOIDANDROID 2.15 and again everything was great,
Yesterday I flashed Baked Bean 4 (again after a full wipe) and apart from some SD issues all seemed ok,
I then decided to restore my TWRP backup of Zeus as I needed to use my 64gig msd card.
After a full wipe and restore Zeus started up but the dpi was messed up (160) I think (way small)
I was seeing loads of FC's and file manager showed my internal SD as being empty. Rebooted to recovery and tried the "Format Data" option
It failed right away with this message "E: Unable to format data."
I have tried flashing the stock .26 rom via TWRP and I have the same issue, dpi set to 160 and internal sd not mounted.
It seems my Internal sd is corrupt
What is the procedure to reformat it via ADB or fastboot? (I have searched but the results I found relate to other devices and I dont want to simply follow instructions that might cause further harm to my TF700)
I have followed the NVflash brick proof procedure and have all relevant files backed up (I did this before flashing the last 2 roms)
Please can some one point me in the right direction
Thanks a lot
Jules
I always wipe cache, system, internal, davic and then do a factory reset.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
When you said that you tried to flash the stock .26 you meant installing not restoring a backup, right? What rom you have on your device right now?
Pretoriano80 said:
When you said that you tried to flash the stock .26 you meant installing not restoring a backup, right. What rom you have on your device right now?
Click to expand...
Click to collapse
Yip extracted the zip from the zip file and copied it to my ext sd and flashed it via TWRP
I have an unusable Zeus4,
Im about to try a full wipe again and then flash .26 again
EDIT
After flashing .26 and selecting reboot I get the "No OS installed! Are you sure you wish to reboot?" message
Looks like the system partition is corrupted, but i'm not sure. I think you should come here on IRC and maybe someone with more experience will help you - - http://webchat.freenode.net/?channels=asus-transformer
Thanks so much Pretoriano80!
With his help on IRC I was able to solve the problem,
In the end I had to return to complete stock, It seems CM10 caused some problems,
You are a a legend dude Thanks!!
:good:
ZaJules said:
Thanks so much Pretoriano80!
With his help on IRC I was able to solve the problem,
In the end I had to return to complete stock, It seems CM10 caused some problems,
You are a a legend dude Thanks!!
:good:
Click to expand...
Click to collapse
This same thing happened to me with my Prime when I was getting ready to send it off for RMA because of a broken HDMI port. Since I was unlocked I was advised to restore to stock before sending it in. However, before I got the chance to do that I started getting the "E: Unable to format data." error that you were. I ended up erasing all partitions from fastboot and putting a note in the box that it wouldn't boot after an OTA. I managed to get away with it and wasn't charged for fixing it
For future reference it would be really helpful to know how you fixed this. Did you do something like what is in this thread: http://forum.xda-developers.com/showthread.php?t=1803343.
Did you ever figure out how CM10 messed up your Infinity? I was running CM9 on my Prime when I got this error. Thanks!
It's hard to say if it was CM10 (or any other custom rom) or TWRP to mess the things up but we managed to get back to stock by replacing the twrp with CWM recovery and installing a modified .30 update package. Was a tricky one but we didn't had to mess with the partitions and that's good.
Pretoriano80 said:
It's hard to say if it was CM10 (or any other custom rom) or TWRP to mess the things up but we managed to get back to stock by replacing the twrp with CWM recovery and installing a modified .30 update package. Was a tricky one but we didn't had to mess with the partitions and that's good.
Click to expand...
Click to collapse
Why did you switch to CWM? Do you have any thoughts on the advantages and disadvantages of TWRP vs CWM?
paddycr said:
Why did you switch to CWM? Do you have any thoughts on the advantages and disadvantages of TWRP vs CWM?
Click to expand...
Click to collapse
Switched to CWM just to make sure it wasn't twrp recovery that somehow was failing to flash the partitions correctly. Tbh so far both do their job and both share the same limitation so far, meaning both fail to restore the boot partition (kernel) so in order to restore successfully (from a nandroid backup) you need to flash the right kernel after restoring is done. Otherwise i like TWRP better and never had issues with it, but i miss the advanced option from CWM, the one that let you format each partition individually.
Pretoriano80 said:
Switched to CWM just to make sure it wasn't twrp recovery that somehow was failing to flash the partitions correctly. Tbh so far both do their job and both share the same limitation so far, meaning both fail to restore the boot partition (kernel) so in order to restore successfully (from a nandroid backup) you need to flash the right kernel after restoring is done. Otherwise i like TWRP better and never had issues with it, but i miss the advanced option from CWM, the one that let you format each partition individually.
Click to expand...
Click to collapse
I'm not certain what you're referring to here. I've restored many times from different TWRP backups (for each custom rom that successfully boots and is half-decent, I make and keep a backup in case I want to jump around and try new things) and I've never had any issues. I am still on the .26 firmware update because I plan to do the nvflash thing. Are you saying that between Zeus v4 (ICS) and various Jelly Bean roms I've been on the same kernel? I gues I just haven't checked.
Anyway, I really love the TWRP recovery and use it with Xoom and Nexus 7 as well. It's so easy to use and always has been reliable.
okantomi said:
I'm not certain what you're referring to here. I've restored many times from different TWRP backups (for each custom rom that successfully boots and is half-decent, I make and keep a backup in case I want to jump around and try new things) and I've never had any issues. I am still on the .26 firmware update because I plan to do the nvflash thing. Are you saying that between Zeus v4 (ICS) and various Jelly Bean roms I've been on the same kernel? I gues I just haven't checked.
Anyway, I really love the TWRP recovery and use it with Xoom and Nexus 7 as well. It's so easy to use and always has been reliable.
Click to expand...
Click to collapse
For me moving between various roms by just restoring a backup never worked like it should. Let's say i'm on CM10 and i want to restore from a stock rom backup, the restore process is done, after reboot the device gets stuck to the first Asus screen and will stay there. Now if i get back to recovery and flash an update. zip containing the stock kernel the device will boot just fine, so definitely the boot image doesn't get restored in my case (with . 26 bootloader ).
Edit: @okantomi: You are using the internal storage or a MicroSD for backup / restoring? I'm really curious how this could work for some and not work for others, i mean same device, same recovery, same bootloader version...
Pretoriano80 said:
For me moving between various roms by just restoring a backup never worked like it should. Let's say i'm on CM10 and i want to restore from a stock rom backup, the restore process is done, after reboot the device gets stuck to the first Asus screen and will stay there. Now if i get back to recovery and flash an update. zip containing the stock kernel the device will boot just fine, so definitely the boot image doesn't get restored in my case (with . 26 bootloader ).
Edit: @okantomi: You are using the internal storage or a MicroSD for backup / restoring? I'm really curious how this could work for some and not work for others, i mean same device, same recovery, same bootloader version...
Click to expand...
Click to collapse
Ok, I only flash a new zip from the internal storage...made myself a "Flashworthy" folder which I keep stocked with newest versions of roms/gapps. I save my TWRP backups to my external microsdcard, as well as my TiBu backups. I have never had a problem restoring from TWRP this way, honestly.
okantomi said:
Ok, I only flash a new zip from the internal storage...made myself a "Flashworthy" folder which I keep stocked with newest versions of roms/gapps. I save my TWRP backups to my external microsdcard, as well as my TiBu backups. I have never had a problem restoring from TWRP this way, honestly.
Click to expand...
Click to collapse
Well, in this case i really have no clue why restoring works for some users but not for all.Dees_Troy, the dev behind Twrp recovery told me that .26 bootloader is to blame for the recovery failing to restore the boot partition, but looks like you have that bootloader version and restoring works good for you... interesting.
Pretoriano80 said:
Well, in this case i really have no clue why restoring works for some users but not for all.Dees_Troy, the dev behind Twrp recovery told me that .26 bootloader is to blame for the recovery failing to restore the boot partition, but looks like you have that bootloader version and restoring works good for you... interesting.
Click to expand...
Click to collapse
It is a mystery. Is there any other info that might be relevant to see why the difference in results? I ask because I would like to understand this device better, as well as potentially help others.
okantomi said:
It is a mystery. Is there any other info that might be relevant to see why the difference in results? I ask because I would like to understand this device better, as well as potentially help others.
Click to expand...
Click to collapse
I don't know, maybe the twrp version and the backup options, like if you are using compression or not, which partitions do you backup (boot, system, data, recovery, cache)...
Pretoriano80 said:
I don't know, maybe the twrp version and the backup options, like if you are using compression or not, which partitions do you backup (boot, system, data, recovery, cache)...
Click to expand...
Click to collapse
I'm using TWRP 2.2.2.1, I back up boot, system and data only, and I don't use compression.
Hey there guys, im having trouble restoring my Rom backups through twrp recovery since im on cm 12.1 i had done nandroid backups of my stock and cm12 Roms. The other day i tried going back to previous rom but when i go to twrp/ restore option...there is nothing even though i have the backup folders in my external sd. I tried moving the folders to internal storage also to check if it shows in twrp but nothing there....what do i do, help me cuz this is essential for changing Roms and stuff.
Well I think I got the reason behind it. When the system partition is wiped, the backup that is created before the system being wiped is not read. I tried it my self, I flashed cm 12.1 doing it fail proof method (wiping cache/dalvik/data and SYSTEM partitions)and before flashing the ROM I did a nandroid back up which when I went in the restore option in twrp was there before flashing the ROM . once I flashed the ROM, after everything gets booted and all I go to twrp, even though I have the backup folders I just doesn't show in twrp restore. That's what I've figured. Is this really the reason or there's something else being it.....?
Sent from my SM-N9005 using XDA Free mobile app
Please Help
I was in miui ROM then I tried flashing Metallium ROM, after I flashed it, it booted up but, it wasn't restoring my previous apps, so I skip that part, but then when I got to the home screen I wasn't able to access my stuffs in my phone memory.
So I thought maybe I need to change the data to f2fs, so I went to the recovery and did and flashed the Metallic ROM again, but this time it didn't boot at all, there was a bootloop and I could get past the start up screen.
I tried my older ROMs the one that I had, but it's all giving me the same response now, I have switch before but I never have had this problem. Please help, how do I flash other lollipop ROM again.
Maybe changing to f2fs and doing a factory reset. If that doesn't help, flash stock ROM via fastboot.
kennylrmsailo said:
Please Help
I was in miui ROM then I tried flashing Metallium ROM, after I flashed it, it booted up but, it wasn't restoring my previous apps, so I skip that part, but then when I got to the home screen I wasn't able to access my stuffs in my phone memory.
So I thought maybe I need to change the data to f2fs, so I went to the recovery and did and flashed the Metallic ROM again, but this time it didn't boot at all, there was a bootloop and I could get past the start up screen.
I tried my older ROMs the one that I had, but it's all giving me the same response now, I have switch before but I never have had this problem. Please help, how do I flash other lollipop ROM again.
Click to expand...
Click to collapse
Anyone out there? Need help desperately.
Anyone?
samuelcr93 said:
Maybe changing to f2fs and doing a factory reset. If that doesn't help, flash stock ROM via fastboot.
Click to expand...
Click to collapse
Yeah that might work but I'm kinda looking for a solution where I don't have to flash the stock again because I lost all my moto g stuffs some months back.
And another thing is that when I flash MIUI its working fine again and I'm able to access all the file in my phone storage also. Any suggestions?
Mmmm if you are using TWRP you could connect the phone to the PC and make a backup while you are in recover mode. Then format again data partition to f2fs and make a factory reset including internal storage and finally flash your ROM and restore your files.
But if that is not working then the only option is flashing Stock ROM
If MIUI is still booting it means that your data partition is still ext4
Due to problems with Google Services on my rooted Galaxy S5 (SM-G900F) I opted for a reset from TWRP and it returned to a condition where after some initial screens it was just stuck at "Checking for Updates" so I went back into TWRP and told it to wipe the other partitions. Whoops - now I have no OS (I was sort of assuming that the factory reset OS was somewhere else)
Which is the stock ROM for my Region - UK, unbranded - where do I get it from and how do I load it using Odin and/or TWRP?
TIA
Hello,
Did you make a nandroid backup of your stock ROM or a nandroid backup of a custom ROM if you installed one? If you have a nandroid backup of either of those then you can restore them in TWRP by choosing the restore option and then your nandroid then swipe the slider at the bottom of the screen. If you installed a custom ROM at any time before this and you still have the ROM file then you can reflash the ROM and Gapps.
If you don't have a custom ROM stored anywhere but can still get to recovery, then you can download any of the custom ROMs compatible with your device and a Gapps package that matches it and put them on your extsdcard then boot to recovery and flash the ROM and gapps, do the normal wipes in recovery after flashing, the normal wipes(wipe data/factory reset, wipe cache and wipe dalvik cache), DO NOT CHOOSE THE ADVANCED OPTIONS THAT LET YOU WIPE PARTITIONS.
Check this thread to see if it is your stock firmware, it SHOULD be but double check first, it also has instructions for rooting again and installing recovery.
http://forum.xda-developers.com/galaxy-s5/development/stock-rom-root-recovery-sm-g900f-t2967725
If that doesn't work then go to Sammobile.com and search for your stock firmware by using your device model number.
The firmwares can sometimes be found at samsung-updates.com also.
Find the right firmware for your exact model number and flash through Odin.
For further assistance, post your question in the forum linked below.
http://forum.xda-developers.com/galaxy-s5/help
Good luck.
Droidriven said:
Did you make a nandroid backup of your stock ROM or a nandroid backup of a custom ROM if you installed one?
Click to expand...
Click to collapse
Sadly not - wasn't expecting to need it, thought it would revert to factory default - I have Titanium backup of apps and data.
I am hopefully a few minutes away from downloading the stock ROM and hopefully can reflash that using ODIN.
KD
colehill said:
Sadly not - wasn't expecting to need it, thought it would revert to factory default - I have Titanium backup of apps and data.
I am hopefully a few minutes away from downloading the stock ROM and hopefully can reflash that using ODIN.
KD
Click to expand...
Click to collapse
Making nandroid backups in recovery is the most important and valuable function of custom recovery, flashing ROMs is its' secondary purpose Android is not like PC with a recovery partition that restores a factory IMG, on PC that factory IMG is stored in a recovery partition. The factory reset feature in stock android does not restore an IMG, it deletes all data from the user partition and leaves everything in system partition the way it is, if you delete a system app and then do a factory reset then you will still not have the system app that you deleted. Anything you modify in system remains the way you modified it if you use the factory reset option. You should only use the factory reset in recovery, not the factory reset in system settings when you have a rooted device with custom recovery.
I'm sure that when you found the recovery, the directions had to have mentioned making a nandroid backup of your stock ROM before flashing anything, your present situation is why you do that, so that if anything goes wrong then you can easily restore to the one ROM that you know for sure works with no issues.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
I'm sure that when you found the recovery, the directions had to have mentioned making a nandroid backup of your stock ROM before flashing anything, your present situation is why you do that, so that if anything goes wrong then you can easily restore to the one ROM that you know for sure works with no issues.
Click to expand...
Click to collapse
I installed the TWERP recovery as part of the rooting operation and I didn't pay any attention to the backup option - I thought that's what Titanium did.
I am learning and will make sure that I take a Nandroid backup once I have it back up and running. Life would be so much simpler if only Samsunng didn't stuff their 'phones with bloatware that can't be deleted in stock mode.
KD
colehill said:
I installed the TWERP recovery as part of the rooting operation and I didn't pay any attention to the backup option - I thought that's what Titanium did.
I am learning and will make sure that I take a Nandroid backup once I have it back up and running. Life would be so much simpler if only Samsunng didn't stuff their 'phones with bloatware that can't be deleted in stock mode.
KD
Click to expand...
Click to collapse
Titanium backup can only backup data that you installed or downloaded, it does not backup anything that comes on the phone itself, that is what custom recovery is for.
When following guides to mod your device, read and understand ALL instructions before you even make the first move to touch your device. Get used to being thorough about reading and understanding first or you'll end up in a mess, possibly even hard brick your device, all it takes is one wrong move. Not all mistakes are fixable with android devices.
Sent from my SCH-I535 using Tapatalk
Hello!
I am sorry if this is the incorrect place to post, but I have a very annoying issue with my OnePlus One!
A few days ago I took the OTA update from Android 4.4.4 all the way to 5.1.1. However, there are quite a few bugs with this version, and the "Material UI" is seriously getting on my nerves so I would like to revert back to my previous version. This should be doable because I performed a Nandroid backup with TWRP before updating the phone. My backup is saved on a USB stick which I connect to the phone via a USB OTG cable, which is perfectly mountable in the Recovery.
My phone is rooted and WAS running TWRP Recovery before I upgraded to Lollipop, this replaced TWRP with Cyanogens stock. When I re-rooted my phone I had to reinstall a custom recovery. For some reason, ADB installing TWRP was just not working (No errors, it just didnt install no matter what) so I opted to try a CWM recovery which did the trick.
Now my issue is that my recovery is unable to mount /sdcard which prevents it from performing backups or restores.
I could really use some help here.
Did you update your backup (TWRP?) as well? What version of it are you on?
JeffDC said:
Did you update your backup (TWRP?) as well? What version of it are you on?
Click to expand...
Click to collapse
I am not sure what you mean by updating the backup. The backup is backed up and left in the state it was when I took it, that is to say Android 4.4.4 and the version of TWRP (The date I installed TWRP the first time) is mid February 2015.
The phones recovery right now is PhilzRecovery which as far as I understand is CWM. Latest version.
Try installing twrp from the CWM recovery.. And before restoring the phone from nandroid try installing the clean stock rom at 4.4.4 and then do the nandroid restore.
Sent from OPO using Tapatalk
Press on thanks if I helped you
ashuthosh.heda said:
Try installing twrp from the CWM recovery.. And before restoring the phone from nandroid try installing the clean stock rom at 4.4.4 and then do the nandroid restore.
Sent from OPO using Tapatalk
Press on thanks if I helped you
Click to expand...
Click to collapse
And to do this, I would just drop the .img for TWRP into my phones storage and chose it from inside the recovery? Would this really work? It might be my inexperience, but it sounds somewhat risky.
NodCom said:
And to do this, I would just drop the .img for TWRP into my phones storage and chose it from inside the recovery? Would this really work? It might be my inexperience, but it sounds somewhat risky.
Click to expand...
Click to collapse
Don't know if CWM recovery supports installing img. Twrp supports img flashing. Check the features of CWM recovery and proceed.
Sent from my A0001 using Tapatalk
ashuthosh.heda said:
Don't know if CWM recovery supports installing img. Twrp supports img flashing. Check the features of CWM recovery and proceed.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Well... I am not sure how I just managed this, but I was tinkering about inside my TWRP application and tried the "Install TWRP recovery" setting a second time (I tried it before making this thread, the first time it failed), it actually was successful because it booted into TWRP. From here I selected the TWRP-backup I kept and it installed it successfully (With one note, that it during the installation said something among the lines of "Restoring backup without deleting /data/media" or something like that. The phone rebooted itself after it finished updating, and the old Cyanogen/OPO bootanimation plays. But at login (My device is encrypted since long) it tells me my password is incorrect?!
How could this to happen? I've only ever used a single password (numbers only) for my phone encryption. This is very odd.
NodCom said:
Well... I am not sure how I just managed this, but I was tinkering about inside my TWRP application and tried the "Install TWRP recovery" setting a second time (I tried it before making this thread, the first time it failed), it actually was successful because it booted into TWRP. From here I selected the TWRP-backup I kept and it installed it successfully (With one note, that it during the installation said something among the lines of "Restoring backup without deleting /data/media" or something like that. The phone rebooted itself after it finished updating, and the old Cyanogen/OPO bootanimation plays. But at login (My device is encrypted since long) it tells me my password is incorrect?!
How could this to happen? I've only ever used a single password (numbers only) for my phone encryption. This is very odd.
Click to expand...
Click to collapse
I guess it's a side effect of restoring up a backup of 4.4.4 on lollipop. Try factory reset from twrp and then flash the backup. I would still suggest to first install the stock firmware of 4.4.4 and flash it and then do a restore of 4.4.4.
Sent from OPO using Tapatalk
Currently on Resurrection Remix
Thank me if I helped you.
Also make sure you are using the most recent version of TWRP, as it provides better 'outs' and reliability for newer OP OS versions.