Related
Hey guys first topic on this forum hope i posted in the right area.
I recently brought a unlocked Nexus S (9023) and downloaded the official 4.0.3 update manually from google and copied to internal hard drive and installed it.
I really dont like the new android version it is laggy and is draining the battery rapidly!
I have tried to re install 2.3.6 but cant because when I try to boot into recovery it fails showing a dead android figure??.
Please help!!!!
I have the same problem but do not want to down date. Just want a solution to the blank recovery screen
I think if you hold up a torch you will be able to read text .
Something very strange happened yesterday.
I got the latest OTA and installed it, after this the touch screen is not responding at all.
I managed to control the tablet with an usb mouse, so I have been able to do a factory reset, but to no avail.
Just now I'm clueless on what to do.
I actually did on more thing in the same process; the initial reason for why I took up the tablet yesterday, was to put on a screen protector film.
So while it was updating I put on the screen protector, after all this was done the touch screen was not responding. I don't think this issue has nothing to do with the screen protector, and I have also now removed the film. But still the screen does not react to touch.
But what to do from here?
Is it possible to revert to a previous version of the firmware?
I doubt reversion is the best option.
If this was common this forum would be flooded with complaints.
It might have been something to do with putting on the screen protector DURING an update.
Factory reset may help. Did you try the pinhole reset switch?
Sent from my HTC One X using Tapatalk 2
I can use the tablet with a usb mouse, and have been able to do a factory reset. But this did not difference.
I have also tried the pinhole reset, no luck...
I have the same issue.
I tried back to ICS stock rom. Touch screen is not responding too. :crying:
imtheyoyo said:
I have the same issue.
I tried back to ICS stock rom. Touch screen is not responding too. :crying:
Click to expand...
Click to collapse
Interesting.
Was it after the latest OTA the touch screen stopped working? Or was it something else that started this?
My tablet is stock in every way, never been rooted or had other roms installed.
I could of course send it in to service, but since I bought the tablet while on holiday in Washington DC and I reside in Norway, it's a little unpractical.
owangen said:
Interesting.
Was it after the latest OTA the touch screen stopped working? Or was it something else that started this?
My tablet is stock in every way, never been rooted or had other roms installed.
I could of course send it in to service, but since I bought the tablet while on holiday in Washington DC and I reside in Norway, it's a little unpractical.
Click to expand...
Click to collapse
what is your image version and touch FW version? my A700 touch function is normal after OTA update.
my image is Acer_AV051_A700_RV19RC01_TWN_GEN1
touch FW version:AT0-22F40-F6935B
My touch screen work again.
I back to ICS stock rom (Acer_AV043_A700_RV07RC06_EMEA_FR), then I apply the update (Acer_A700_AV043.RV07RC06_AV043.RV23RC04_EMEA_FR).
Now I'm on JB (Acer_A700_AV043.RV23RC04_AV051.RV10RC01_EMEA_FR). All Work fine.
jacksonkuo said:
what is your image version and touch FW version? my A700 touch function is normal after OTA update.
my image is Acer_AV051_A700_RV19RC01_TWN_GEN1
touch FW version:AT0-22F40-F6935B
Click to expand...
Click to collapse
Thanks. Compared to yours I see that there is some problem with my touch FW version. On my tablet it says AT0-0-0.
Image version reads Acer_AV051_A700_1.052.00_PA_CUS1
Is it a way for me to fix this? Could I perhaps reapply some of the patches?
Sent from my U8860 using Tapatalk 2
owangen said:
Thanks. Compared to yours I see that there is some problem with my touch FW version. On my tablet it says AT0-0-0.
Image version reads Acer_AV051_A700_1.052.00_PA_CUS1
Is it a way for me to fix this? Could I perhaps reapply some of the patches?
Sent from my U8860 using Tapatalk 2
Click to expand...
Click to collapse
Seems the touch FW is incorrect.Maybe you can download the OS upgrade image from Acer website and reflash OS. I checked the image and it should packed touch FW. If still failed, maybe contact Acer service is good way to solve your problem.
Good luck.
I had the same problem this week, bought the Tablet on monday, made the OTA Update and boom, no Touch input.
I resolved it by unlock my device, flash CWM and then flashed a older full rom.
After that i made the OTA Update again and this time it worked well.
I can upload the ROM i used for this if it's needed.
MfG Frank
via Acer Iconia Tab A700 mit Tapatalk 2.0
Thanks. I have fixed my tablet now.
I managed to reflash an older rom, taken from Acer site. And then upgraded via ota to the latest version.
I did not need to use cwm. Just started the tablet the power + volume - combination
Sent from my A700 using Tapatalk 2
Problem: Screen touches are bugged..
Hi,
I need some urgent help..
I upgraded my A700 (was shipped with 4.0.4) to JB but the screen touches are completely off track. I did the following:
1) unlocked the bootloader
2) flashed CWM Rom 6.0.1.5
3) installed cm-10
Don't know what to do next..
I have an Acer A700 and I'm having the same problem as others here.
Once I upgarded my ROM, the A700 touch-screen did not work.
I found a post that explained a fix. Here's what I did:
* Flashed the non-touch CWM v6.0.1.5
* Wiped everything (system, data, cache, dalvik)
* Installed the IconiaN ROM (by Vorbeth) and choose the option to have IconiaN upgrade my "Touch Firmware"
* The A700 is now booting with version JB-653b3d3 (Unlocked)
* The ROM loads just fine
However, in the ROM, the touchscreen does not work. Clicking in one place on the screen will trigger a click in an entirely different area of the screen.
I then tried installing one of the stock Acer ROMs from their website through CWM. None of them would load, not sure why?
Other people here seem to have solved the problem by flashing an "older ROM" from Acer. I could not find any trace of this older ROM.
I'm running an American version (PA1_CUS) if that makes any difference? I've also tried installing CM 10.1 with the same problems in the touchscreen.
Thank you in advance for any suggestions!
RKM
Where can i get the acer software to update? i've tried to find it on the acer website but i cant find it.
please help. i just got the device and i updated it and now a portion of the screen becomes unresponsive to touch input.
toggling the screen on and off will fix it temporarily but that only lasts for 5 minutes max before it stops being responsive again.
Every thing on it is stock so i want to keep it that way
pyrochance said:
Where can i get the acer software to update? i've tried to find it on the acer website but i cant find it.
please help. i just got the device and i updated it and now a portion of the screen becomes unresponsive to touch input.
toggling the screen on and off will fix it temporarily but that only lasts for 5 minutes max before it stops being responsive again.
Every thing on it is stock so i want to keep it that way
Click to expand...
Click to collapse
Try Google and search for your Rom Build number. Should be able to find the update file. You can also try some of the Acer support sites. I remember they have some ICS full roms for the 700.
Next of course, you're going to ask how to install it?
1. Decrypt the original update file (tool is in the themes and apps forum)
2. Using 7zip, OPEN the decrypted file (DO NOT UNZIP IT)
3. Pull the "update.zip" (NO NOT UNZIP IT)
4. Copy the update.zip to your ext sd card
5. Start tablet holding PWR & Vol- or + (can't remember which) until you see the text in upper left corner then release. Now, JB may have a different stock recovery which offers a small menu. I believe you can select the install update from there.
If the update doesn't install, it may be the wrong update file, so you'll have to search for another.
Anyhow, should work for you. But you may have to roll back to the original ICS rom (full version) then OTA update again.
Remember though, you do this at your own risk, so if things get messed up, don't blame anybody
Moscow Desire said:
Try Google and search for your Rom Build number. Should be able to find the update file. You can also try some of the Acer support sites. I remember they have some ICS full roms for the 700.
Next of course, you're going to ask how to install it?
1. Decrypt the original update file (tool is in the themes and apps forum)
2. Using 7zip, OPEN the decrypted file (DO NOT UNZIP IT)
3. Pull the "update.zip" (NO NOT UNZIP IT)
4. Copy the update.zip to your ext sd card
5. Start tablet holding PWR & Vol- or + (can't remember which) until you see the text in upper left corner then release. Now, JB may have a different stock recovery which offers a small menu. I believe you can select the install update from there.
If the update doesn't install, it may be the wrong update file, so you'll have to search for another.
Anyhow, should work for you. But you may have to roll back to the original ICS rom (full version) then OTA update again.
Remember though, you do this at your own risk, so if things get messed up, don't blame anybody
Click to expand...
Click to collapse
Thank you for the detailed help!
after many google searches i finally found the update files on the acer website!
i managed to go back to ics then re update to jb
and for a while my screen had no issues but they came back again. Im begining to think that its a hardware related issue because it comes and goes. I am going to see if my warranty with square trade will get it fixed.
Hi guys,
I just bought a new Coby Kyros MID8127 tablet (A8, Android 2.3) for my friend.
Now, I want to flash a custom ROM with JB on it, but I just did not find any ROM, CWM or tutorial for that here at XDA (or elsewhere).
Is it possible, that there is no custom ROM for that tablet to have?
Thank you in advance.
Greetings,
sYCO
I have the same tablet and I bought a custom ROM from the people at KTZ, however, I could not install this ROM successfully, in order to install it I had to take the tablet to factory reset state and then delete a bunch of system applications to make room for the new ROM because the ROM does not allow you to install it from a formatted system partition (it's more like an upgrade). But when I finally installed the ROM it wuold not boot a second time; what that means is that, after installation the ROM boots normally but if I reboot it gets caught in a loop where I just see a blue disk spinning and it doesn't do anything else and the only way to get it out of that loop is to connect the USB cable and boot to recovery via adb and restore the backup that i did before flashing the new ROM. I tried to get help from the guy who makes these ROMs but he wasn't very helpful. I followed all his instructions and always got the same result.
I managed to install manually most of the components of this ROM through a long process of trial and error and left out the components that make the tablet misbehave and now I have a hybrid on my tablet which works pretty well with the exception of the wifi. The wifi works but at times is painfully slow.
I tried other ROMs from Android Tablet forums (check here). There is an ICS Rom there (or more than one, I don't remember) and also a JB ROM for the 8127 but I could not make them work on my tablet. The ICS ROM installed fine and runs very fast but it keeps freezing so I uninstalled. The Jelly Bean did not install properly and it was very hard to get the tablet to a working state after it bricked.
That was a while ago and I haven't checked lately if there is something else out there.
leunam12 said:
I have the same tablet and I bought a custom ROM from the people at KTZ, however, I could not install this ROM successfully, in order to install it I had to take the tablet to factory reset state and then delete a bunch of system applications to make room for the new ROM because the ROM does not allow you to install it from a formatted system partition (it's more like an upgrade). But when I finally installed the ROM it wuold not boot a second time; what that means is that, after installation the ROM boots normally but if I reboot it gets caught in a loop where I just see a blue disk spinning and it doesn't do anything else and the only way to get it out of that loop is to connect the USB cable and boot to recovery via adb and restore the backup that i did before flashing the new ROM. I tried to get help from the guy who makes these ROMs but he wasn't very helpful. I followed all his instructions and always got the same result.
I managed to install manually most of the components of this ROM through a long process of trial and error and left out the components that make the tablet misbehave and now I have a hybrid on my tablet which works pretty well with the exception of the wifi. The wifi works but at times is painfully slow.
I tried other ROMs from Android Tablet forums (check here). There is an ICS Rom there (or more than one, I don't remember) and also a JB ROM for the 8127 but I could not make them work on my tablet. The ICS ROM installed fine and runs very fast but it keeps freezing so I uninstalled. The Jelly Bean did not install properly and it was very hard to get the tablet to a working state after it bricked.
That was a while ago and I haven't checked lately if there is something else out there.
Click to expand...
Click to collapse
Hey Guys,
Just found this link. Maybe you can try it out and tell me if it works for you.
http://www.androidtablets.net/forum...lly-bean-stock-lite-mid8127-rooted-gapps.html
jpapadami said:
Hey Guys,
Just found this link. Maybe you can try it out and tell me if it works for you.
http://www.androidtablets.net/forum...lly-bean-stock-lite-mid8127-rooted-gapps.html
Click to expand...
Click to collapse
Sorry, I gave that tablet back and cannot test it anymore. I rather recommend to buy an Ainol Novo 7 Crystal. It is cheaper, better and ****ing fast with a nice custom ROM support like CM 10, CM 10.1, Paranoid 3.0, Crystal-Fuse, ...
Btw, KTZ sucks totally.
Hey gang, I got this Flytouch 8 tablet last week, model number is BC1003, android version 4.0.4, baseband version 1.5rc4, kernel version 3.0.8+ [email protected] #68 Sat Dec 8 08:54:36 CST 2012, build number crane_bc1003-eng 4.0.4 IMM76D 20121217 test-keys.
I've tried several options to load the recovery partition, only way I can access the recovery is through the backup and reset menu in settings, if I try to do it with the device powered off and holding the menu and power it just boots normal. I've tried a number of options home+power, vol up or down + home, none work. When I do get into the recovery, I cannot scroll through the options only thing there is the android robot with a red triangle and an exclamtion point.
Recovery version says android system recovery 3e EVB-V13.
I also cant get the sd card to mount. I've tried refromatting it with fat32, fat16, ext3 ext4. everything I get a message saying sd card damaged. I've tried 3 different card and same thing.
Any ideas XDA friends? I would like to put a custom rom like AOSP or CM9 or CM10 on it and clockwork recovery if that is an option. I've searched the net high and low for roms, I find many for other Flytouch tablets, but not Flytouch 8. This is the allwinner A10 processor in this one.
Thanks for your help friends.
I
Same problem her with a rooted FT 8 (same as yours)
.
After reboot i get sd card damage error.. after give this da RW i can mount this card again in settings/ storage.
After a reboot i get alway the error sd card damage....
I can get CWM 6.02 on this flytouch but didn`t get any custum roms or CWM backup installed...so get back tio basic image file with Livesuite.
have same recovery : recovery 3e EVB-V13 but cannot do anything with it. It don`t react with all the combination button on my flytouch.
Hopefully you can?
Same problem her with my fluytouch 8 32GB any halp pleas.
Recovery menu
hi
I've got the same tablet from china, am stuck at same spot as you are all, but I figured out how to move through menu in recovery, use usb mouse or keyboard.... any news on some custom rom and installation on this lousy tablet would be appreciated......
Solved Recovery Issue.
Hey everyone. I found this thread today, I tried it and it works perfectly. http://forum.xda-developers.com/showthread.php?t=2189640
I also read somewhere that Allwinner A10 and A13 cannot be flashed using stock recovery, you must use a program like Livesuit to flash firmwares. You can flash custom roms using CWM once it's installed on your device.
fldave612 said:
Hey everyone. I found this thread today, I tried it and it works perfectly. http://forum.xda-developers.com/showthread.php?t=2189640
I also read somewhere that Allwinner A10 and A13 cannot be flashed using stock recovery, you must use a program like Livesuit to flash firmwares. You can flash custom roms using CWM once it's installed on your device.
Click to expand...
Click to collapse
thanks man, this is good news, first step forward in cracking this damn slow tablet....now we need decent rom to install, any ideas?
Possible bricked BC1003..
Hi there I've got the exact same tablet with you BC1003 Model Flytouch Allwinner A10 Superpad 8 1GB Ram version running Android 4.0.4 stock.
So after following guides and researching a lot I ended up trying to upgrade to Jelly Bean.
I got CWM 6.02 installed fine. So I started the flash process.
Firstly I backed up my stuff and then I did a wipe data / factory reset.
Then proceeded and installed the latest possible rom version which I found to be : AOKP JB 4.1.2 ALLWINNER A10.zip
So I installed that one and the process went fine.
Then I installed this compatibility pack : t05a-v3_compatibility_1.2.0.zip
It also went fine.
Then I installed this google apps pack : gapps-jb-20120726-signed.zip
And it also installed normally.
So I was ready to reboot my tablet and so I did.
It turned off and then on again and here we are :
I now notice the screen turn on but it never shows anything..
Before flashing it it would turn on and show the Android OEM screen, then show the android loading text and then turn off and on and show the locked screen which I had to unlock and enter my desktop.
I notice that the screen light follows that pattern so the system is running normally only I don't get to actually see anything on it.
Now I'm kinda stuck here.. I've installed LiveSuite but when I try to install the recovery.img I have from my backup it says invalid image..
Have I bricked it or is there a way out of this mess?
Actually it's not entirely bricked.. well I finally got it to work with LiveSuit 1.09 and managed to flash its firmware to a couple more roms.
1. sun4i_crane_t05a_20120409.img -> Ends up showing some messy stuff on the screen. Looks like the resolution is not correct.
2. sun4i_crane_futekoA90universal_20120531.img -> Shows lots of white stuff and colors switching jelly-like.. But still it doesn't work.
3. TAB360-364_Android_411_Jelly_Bean.img -> This is the official A10 Jelly Bean firmware for Yarvik TAB364 GoTab Gravity 8".. No wonder I still got back to the blank screen issue. I only notice the back light turn on and off following the pattern of normal functionality, only I'm not able to actually see it..
Well, at least I'm still able to keep flashing roms to it.. Any ideas?
I can't even find my stock rom to turn back to 4.0.4. Where exactly is it located in my recovery-mode backup?
Btw, in case it plays any part my tablet is 10.2''.
Any help would be greatly appreciated.
EDIT : Finally I figured it out! My correct stock rom is : sun4i_crane_bc1003.img
I found it through google and after flashing to it I managed to get my tablet at a working state. (ICS 4.0.4 ICS 4.0.3)
So, I'll now try to use more Jelly Bean roms without worrying about bricking it.
Oh, something I noticed that might help others too.. even though on the packaging it says Flytouch Superpad 8 Allwinner A10 this tablet model (BC1003) is actually the Flytouch Superpad 7 and that helped me find my correct rom. Keep that in mind from now on. I'll keep you updated if I succeed in booting to Jelly Bean.
Finally some success..
Well, I finally have some interesting updates on the subject.
I managed to get Jelly Bean to work (Versions 4.1.2 and 4.1.1) on my BC1003 tablet without a compatibility pack (still none has worked for me).
Details on 4.1.2 Version :
Rom File Name : AOKP-4.1.2-3.0.52-Revb.zip
System running smoothly with wifi working fine.
Sound is fine and no crashes occurred.
Touchscreen, screen rotation and camera do not work.
I noticed that I can't browse to my external sd card.. it doesn't seem to get mounted.
Details on 4.1.1 Version :
Rom File Name : cm10_a10_20120913.zip
System running extremely smooth with wifi working fine.
Sound is fine and I experienced no crashes.
Touchscreen, screen rotation and camera do not work.
Also could not mount my external sd card.
Important bug noticed : When I try to change the brightness of my tablet's screen it enters suspended mode no matter what I do and is not fixable. I had to reflash the rom to recover from that state.
I think most of the problems would go away if I found a compatible jelly bean compatibility pack for this tablet.
If anyone has any clue please let me know.
So far I've tried these with no luck :
t05a-v3_compatibility_1.2.0.zip
t05a-unk_compatibility_1.2.0.zip
907c_compatibility_1.2.0.zip
By the way the BC1003 ICS rom that I found to be working was actually not my manufacturer's and it was version 4.0.3 instead of 4.0.4 that my original one was.
So, @fldave612 if it's possible could you please backup and upload yours somewhere so that I can also have it?
EDIT: Actually I figured out that I had kept a good backup form my ICS 4.0.4 using clockwork backup/restore and switched back to that for now.
But I've kept a backup of my Jelly Bean installation too so it's very easy to switch to that now. I'll try again once we get a compatibility pack working.
I feel we're very close to completely upgrading to Jelly Bean now on this tablet. We only need a working compatibility pack.
How did you succeed to install these ROMs, I tried both, installation went OK, but after reboot, only black screen......
Sent from my GT-P5110 using xda app-developers app
baschelik said:
How did you succeed to install these ROMs, I tried both, installation went OK, but after reboot, only black screen......
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
I just installed them without a compatibility pack. It's not the jelly bean build that fails.. it's just the compatibility pack.
I researched it a bit and starting to look for a compatibility pack that works on very similar tablets (10.2'' - 1024 x 600 - 1GB Ram).
I found some, and got it to boot without a blank screen. Some showed messy colors others seemed to be working fine but still no touch..
So until we get one working on our specific precious tablet, we're kinda stuck here..
The 4.1.2 version seemed to be working fine but without touchscreen it's pretty much useless.
We could live without a camera or screen rotation, but not without touchscreen..
I even figured out that I could browse to the external sd card by going to root and then storage folder.. instead of mnt..
Actually now I'm stuck with ICS 4.0.3 since the original backup I kept proved to not be working fine.. it kept on crashing all the time..
So if someone has the original BC1003 ICS 4.0.4 that came from the manufacturer please upload it somewhere and post a link here.
Also if someone works on it to create a touchscreen driver for the world would become more beautiful..
Go to this link: http://www.maixin-china.com/software-download.asp Scroll down about half way and go to the link for "MaPan F10B (Cortex A8 Flytouch 6 and Flytouch 8) Software". I used the newest one 11-28.
This is a firmware is the one for this tablet. Use Livesuit to flash it, it will restore the tablet back to 4.0.4 factory.
It is virtually impossible to brick an A10 tablet from what I'm reading because it can be flashed via usb and have to boot loader re-imaged.
This link is very helpful to flash via Livesuit: http://elinux.org/Hack_A10_devices
Hope this helps you all as much as it did for me. Hopefully in the near future some developers will build a CM10 or higher version that will work on this tablet, until then I'll use this rom with Clockwork recovery mod.
Moin @all
Ich have chrashed my tab too but the download link is dead.
Any ideas where ich can load the file ?
Sorry for my ****ty bad English :silly:
Gothfather
I've also got this tablet (BC1003) - thank you for all the useful information posted on this thread so far.
If I've understood correctly, it's possible to install custom firmware using LiveSuite but at the moment none of them fully support this tablet - is that right?
At the very least I'm looking for a way to increase the size of the internal memory partition - the stock partition table has this unnecessary virtual sdcard partition taking most of the 2GB internal memory...
i have one of these damn slow tablets
i watched a vid on youtube about how to remove the internal sd card it is so simple to do it only take like 3 mins and 7 screws ive done this and put a 16gb card in there
i cant post a link but heres the name of the vid "Flytouch 5 / Superpad 6 V10 - Disassembly - Access to internal TF"
it is not the same tablet but is pretty much the same
Tip use a knife to pop the caps off the outside i found this easier
try not to stab yourself.
thanks if i helped you out
noob
okay so i tried to install a new rom on my allwinner a10 bc1003 and ended up only booting a black screen i dont know what im doing as this is my first tablet an very little computer knolage but im interested i had seen in a post he used livesuit to flash the new rom.... i dont understand how that works if anyone could sit down and teach me that would be apriciated
---------- Post added at 12:21 PM ---------- Previous post was at 12:16 PM ----------
SolidSnakeGr said:
Actually it's not entirely bricked.. well I finally got it to work with LiveSuit 1.09 and managed to flash its firmware to a couple more roms.
1. sun4i_crane_t05a_20120409.img -> Ends up showing some messy stuff on the screen. Looks like the resolution is not correct.
2. sun4i_crane_futekoA90universal_20120531.img -> Shows lots of white stuff and colors switching jelly-like.. But still it doesn't work.
3. TAB360-364_Android_411_Jelly_Bean.img -> This is the official A10 Jelly Bean firmware for Yarvik TAB364 GoTab Gravity 8".. No wonder I still got back to the blank screen issue. I only notice the back light turn on and off following the pattern of normal functionality, only I'm not able to actually see it..
Well, at least I'm still able to keep flashing roms to it.. Any ideas?
I can't even find my stock rom to turn back to 4.0.4. Where exactly is it located in my recovery-mode backup?
Btw, in case it plays any part my tablet is 10.2''.
Any help would be greatly appreciated.
EDIT : Finally I figured it out! My correct stock rom is : sun4i_crane_bc1003.img
I found it through google and after flashing to it I managed to get my tablet at a working state. (ICS 4.0.4 ICS 4.0.3)
So, I'll now try to use more Jelly Bean roms without worrying about bricking it.
Oh, something I noticed that might help others too.. even though on the packaging it says Flytouch Superpad 8 Allwinner A10 this tablet model (BC1003) is actually the Flytouch Superpad 7 and that helped me find my correct rom. Keep that in mind from now on. I'll keep you updated if I succeed in booting to Jelly Bean.
Click to expand...
Click to collapse
okay im sitting at this point but i dont understand the flashing with livesuit
With the Windows utility "Phoenix Card" it is possible to burn the MaPan image mentioned above to a micro SD card. After inserting the micro SD card into the tablet and booting up the image will be flashed onto the tablet, indicated by a progress bar and a ticking sound.This works for our tablet, and should work for firmware for several Allwinner A10 and A20 tablets plus some other processor families (vimicro?).
where can i get Windows utility "Phoenix Card"
cant find 1 that works the inside says Yones toptech BC 1003 all winers A10
flusspferd said:
With the Windows utility "Phoenix Card" it is possible to burn the MaPan image mentioned above to a micro SD card. After inserting the micro SD card into the tablet and booting up the image will be flashed onto the tablet, indicated by a progress bar and a ticking sound.This works for our tablet, and should work for firmware for several Allwinner A10 and A20 tablets plus some other processor families (vimicro?).
Click to expand...
Click to collapse
hi ... i have a Yones toptech BC 1003 all winers A10 (superpad 8 / flaytouch) that im trying to fix...
after 3 days trying every possible firmware, and booting them from external sd card
all i could do was change de logo at boot start from (mapan to kosaco, to oem etc..)
than i had the idea of removing the internal sd card to look at it ...
and guess what it still runs the same with out no sd card in or out
so i thought ... the sd card was never read in the first place cause is damage or corrupted...
so on the 4th day im trying to format and partition the new internal sd card... hoping for the best.
so...
is the firmware installed in a built in memory ??
and how do i format the internall card TF card , and install all the software again
Problems with CWM v6.0.2.8
Sorry to interrupt people, but I'm quite new at this and I guess I made a mess....
I have a Flytouch Superpad VIII with A10 inside (BC1003), which is bricked.
Don't ask me how I got it this way, I guess **** happens.
Downloaded and installed CWM-based Recovery v6.0.2.8 only to find that on the log it cannot mount...
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache recovery/last log
My idea is that I probably used the wrong version of CWM, but if not the case, please tell me.
Anybody know a fix on this?
I've already intalled ADB drivers on my PC and at least I can communicate with my device using ADB.
Any help on unblocking the device and then flashing it would be greatly appreciated
Hi guys,
I bought a cheap tablet, It worked fine until i got an update to lollipop, it slowed the device down horribly and it can't multitask at all anymore. Even opening a new tab in google chrome is terrible laggy and slow.
I managed to get the tablet rooted with kingroot, the programs that came with it to clean and speed up the device work great, but the tablet still not works optimal.
When i tried to install the old rom from the asus website in recovery it sayd it cant find the root destination folder or something like that. And rom manager says there is a more recent version of cwm but when i want to install it it says my tablet is not supported. So how can i go back to the kitkat version of the rom? Am i doing something wrong?
Thanks in advance for your help!
up
anyone?
no one?