Related
Hello,
Earlier today I installed BAKED ROM on my AT&T HTC ONE XL that was at the time running CM 10.1 After having some issues with wifi not working I decided to restore from my backup made in CWR when installing CM 10.1 on my phone. After the restore finished i was stuck in a bootloop. So i went back into CWR to re install the BAKED ROM. Once i cleared drive i came to realize that i somehow deleted the .zip files for the ROM on my phone and no longer had a ROM to install. After that i decided that I would mount my phone from CWR so i can transfer the .zip to my phone and then install. After realizing i need to use TWRP to be able to mount and transfer files i was going to flash over TWRP in fastboot. My issue currently is that my phone is powered off after telling it to shutdown in bootloader, and i can not get it to turn back on or to boot into bootloader so that i can flash TWRP. Hopefully i am missing something small here. Any advise is appreciated.
Thank You
coltp10 said:
Hello,
Earlier today I installed BAKED ROM on my AT&T HTC ONE XL that was at the time running CM 10.1 After having some issues with wifi not working I decided to restore from my backup made in CWR when installing CM 10.1 on my phone. After the restore finished i was stuck in a bootloop. So i went back into CWR to re install the BAKED ROM. Once i cleared drive i came to realize that i somehow deleted the .zip files for the ROM on my phone and no longer had a ROM to install. After that i decided that I would mount my phone from CWR so i can transfer the .zip to my phone and then install. After realizing i need to use TWRP to be able to mount and transfer files i was going to flash over TWRP in fastboot. My issue currently is that my phone is powered off after telling it to shutdown in bootloader, and i can not get it to turn back on or to boot into bootloader so that i can flash TWRP. Hopefully i am missing something small here. Any advise is appreciated.
Thank You
Click to expand...
Click to collapse
hold the power button down for about 15 seconds. wait for 5 seconds, then press the power button and volume down at the same time after a few seconds you should get the bootloader screen.
does the led come on when you're charging it?
cr1960 said:
hold the power button down for about 15 seconds. wait for 5 seconds, then press the power button and volume down at the same time after a few seconds you should get the bootloader screen.
does the led come on when you're charging it?
Click to expand...
Click to collapse
Thank you for your response. From following your instructions i was still not able to get into bootloader, and when i plug it in to charge the LED does not come on
coltp10 said:
Thank you for your response. From following your instructions i was still not able to get into bootloader, and when i plug it in to charge the LED does not come on
Click to expand...
Click to collapse
Sadly based on my knowledge and experience(I learned this the hard way by taking the ATT OTA) if the led doesn't come on while charging and you cant access your bootloader your phone is sadly dead. However you can double check to see if its your cord and if it is not then call HTC if device is still under warranty. They replaced the internals of mine and recieved it back at no charge.
If I have helped in any way hit the Thanks button please.
Why did you "need" to go to TWRP to mount SD? Clockworkmod has had SD mount fixed for some time now, hasn't it?
Leave the phone on wall charger (not connected to computer) overnight or 8 Hrs or so, and see if you get any LED's or can get into bootloader. If you were only messing with ROMs and recovery, I don't see how you can be bricked (as long as anything you were trying to flash was for the EVITA). The battery may just have run down while you were messing with the device.
redpoint73 said:
Why did you "need" to go to TWRP to mount SD? Clockworkmod has had SD mount fixed for some time now, hasn't it?
Leave the phone on wall charger (not connected to computer) overnight or 8 Hrs or so, and see if you get any LED's or can get into bootloader. If you were only messing with ROMs and recovery, I don't see how you can be bricked (as long as anything you were trying to flash was for the EVITA). The battery may just have run down while you were messing with the device.
Click to expand...
Click to collapse
Well when i went into clockworkmod and told it to mount SD it did not work, i have all of my drivers installed properly so it couldn't be a driver issue. So i figured that i would just flash over TWRP and use mount to usb as a second shot. I will have to try and leave it plugged in later after work. Yes the ROM that i installed was for the EVITA, it was running fine except the wifi wouldnt turn on.
coltp10 said:
Well when i went into clockworkmod and told it to mount SD it did not work, i have all of my drivers installed properly so it couldn't be a driver issue.
Click to expand...
Click to collapse
If/when you get back up and running, if still on CWM, make sure its up to date. I think the SD mount was fixed quite some time ago.
redpoint73 said:
If/when you get back up and running, if still on CWM, make sure its up to date. I think the SD mount was fixed quite some time ago.
Click to expand...
Click to collapse
Okay thanks for the input i will check it out as soon as I am able
When i came home from work and plugged it in the red LED light came on. After letting it charge for about 5 hours i tried to access the bootloader by pressing power down for 15 seconds, then waiting 5, and then power and volume down, to no result. Only when holding down power for the first 15 seconds the soft on screen keys did flash
coltp10 said:
When i came home from work and plugged it in the red LED light came on. After letting it charge for about 5 hours i tried to access the bootloader by pressing power down for 15 seconds, then waiting 5, and then power and volume down, to no result. Only when holding down power for the first 15 seconds the soft on screen keys did flash
Click to expand...
Click to collapse
After holding the power button down and let the capacitive keys flash 6 times. The 6 flashes means a hard reset and it's about to start rebooting. Let go of the power button and immediately hold volume down. It should take you into the bootloader. Then you can fastboot flash TWRP.
Sent from my HTC One X using Tapatalk 2
Thank you
Finally after letting it charge all night, i was able to access my bootloader, i flashed over TWRP and am in the process of mounting my sd to transfer the rom and hopefully install. Thank you all for you help!!
coltp10 said:
Finally after letting it charge all night, i was able to access my bootloader, i flashed over TWRP and am in the process of mounting my sd to transfer the rom and hopefully install. Thank you all for you help!!
Click to expand...
Click to collapse
Good luck
Sent from my HTC One X using xda premium
Well i was able to install cm 10.1 back to my phone and successfully load it, my only issue now as before when i installed the BAKED rom, is my wifi doesn't seem to work or recognize any networks
coltp10 said:
Well i was able to install cm 10.1 back to my phone and successfully load it, my only issue now as before when i installed the BAKED rom, is my wifi doesn't seem to work or recognize any networks
Click to expand...
Click to collapse
Glad you got it working.
What hboot are you on? If you are on one of the newer ones, not 1.09, and don't have s-off you have to manually flash the boot.img through fastboot after installing the ROM. That sounds like it might be your issue.
pside15 said:
Glad you got it working.
What hboot are you on? If you are on one of the newer ones, not 1.09, and don't have s-off you have to manually flash the boot.img through fastboot after installing the ROM. That sounds like it might be your issue.
Click to expand...
Click to collapse
Agreed, i did forget to flash to boot image during my excitement to a working phone again, even so, if i hadn't flashed the boot image why is it that my phone was actually able to start up the rom and go through phone system setup?
coltp10 said:
Agreed, i did forget to flash to boot image during my excitement to a working phone again, even so, if i hadn't flashed the boot image why is it that my phone was actually able to start up the rom and go through phone system setup?
Click to expand...
Click to collapse
because the rom you flashed is based on CM so it was compatible enough to boot but not have everything working as it should. if you don't flash the boot.img, the previously used kernel would still be used.
The ROM was running and i was able to use my phone. Then i flashed over the boot.img for my rom and now it doesnt boot up it is stuck at the Cyanogen Mod loading screen
coltp10 said:
The ROM was running and i was able to use my phone. Then i flashed over the boot.img for my rom and now it doesnt boot up it is stuck at the Cyanogen Mod loading screen
Click to expand...
Click to collapse
boot to recovery, wipe everything (cache, dalvik, system, factory reset), reflash the rom you want to use, then reboot to bootloader and fastboot flash boot boot.img extracted from the rom you just flashed.
Not sure where you went wrong but that will get you booting. To avoid having to fastboot flash boot boot.img everytime, you can S-OFF.
exad said:
boot to recovery, wipe everything (cache, dalvik, system, factory reset), reflash the rom you want to use, then reboot to bootloader and fastboot flash boot boot.img extracted from the rom you just flashed.
Not sure where you went wrong but that will get you booting. To avoid having to fastboot flash boot boot.img everytime, you can S-OFF.
Click to expand...
Click to collapse
I will have to look into the S-OFF. As of right now i wiped everything, installed rom, installed gaps, went to bootloader flashed boot.img and now just waiting to see if it will start up
coltp10 said:
I will have to look into the S-OFF. As of right now i wiped everything, installed rom, installed gaps, went to bootloader flashed boot.img and now just waiting to see if it will start up
Click to expand...
Click to collapse
You can also use the flash image GUI app to flash a boot image in Android right before you boot to recovery to flash the ROM. But I would definitely look into s-off. It's a very easy process and then you don't ever have to worry about the boot.img at all.
I have been having this issue with flashing recovery on my Nex5 ever since I installed lollipop(factory image).
I have repeatedly tried to install TWRP (2.8.2.0) on my device but it just doesn't seem to stick no matter what I try.
Each time it gets installed but as soon the the system reboots, its gone. If I directly boot into the recovery from fastboot or bootup recoveryafter flash without restarting the bootloader, the TWRP logo shows up and then the device just restarts.
Please help me out here. Really want to go back to PA4
Thanks
You probably updated to LRX21O through OTA.
Go back to 4.4.4 through factory image. Boot system once. Reboot to bootloader. Flash twrp. Using vol keys, boot to recovery directly from bootloader. Flash PA.
agent47er said:
I have been having this issue with flashing recovery on my Nex5 ever since I installed lollipop(factory image).
I have repeatedly tried to install TWRP (2.8.2.0) on my device but it just doesn't seem to stick no matter what I try.
Each time it gets installed but as soon the the system reboots, its gone. If I directly boot into the recovery from fastboot or bootup recoveryafter flash without restarting the bootloader, the TWRP logo shows up and then the device just restarts.
Please help me out here. Really want to go back to PA4
Thanks
Click to expand...
Click to collapse
Read this.
I just got a broken Nexus5 with a boot-loop issue. As soon as the Google logo appears it reboots. I can enter booloader normally but if I select recovery the same happens, reboot. I unlocked the bootloader and flashed TWRP in, same thing. Tried to flash full stock 5.1.1, same thing.
Any ideas?
Himeko7 said:
I just got a broken Nexus5 with a boot-loop issue. As soon as the Google logo appears it reboots. I can enter booloader normally but if I select recovery the same happens, reboot. I unlocked the bootloader and flashed TWRP in, same thing. Tried to flash full stock 5.1.1, same thing.
Any ideas?
Click to expand...
Click to collapse
Try flashing stock google image 5.1 with or without fastboot.
ghosty7 said:
Try flashing stock google image 5.1 with or without fastboot.
Click to expand...
Click to collapse
I did already as I mentioned. But I can't even enter TWRP, as soon I select recovery it reboots. Faulty board/storage?
Himeko7 said:
I did already as I mentioned. But I can't even enter TWRP, as soon I select recovery it reboots. Faulty board/storage?
Click to expand...
Click to collapse
You said 5.1.1 that is not out yet only 5.1. Also you do not need TWRP to flash google stock image, if you can get into bootloader as you said, you can flash the image with your PC. or am i missing something ?
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
ghosty7 said:
You said 5.1.1 that is not out yet only 5.1. Also you do not need TWRP to flash google stock image, if you can get into bootloader as you said, you can flash the image with your PC. or am i missing something ?
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Click to expand...
Click to collapse
Sorry I meant 5.1.0 from https://developers.google.com/android/nexus/images
I first flashed TWRP with the idea to install CM from there, but then I can't even enter it (all commands through fastboot work just fine), which is a pretty bad sign I guess. Then I flashed stock 5.1.0, and nothing changed.
Himeko7 said:
Sorry I meant 5.1.0 from https://developers.google.com/android/nexus/images
I first flashed TWRP with the idea to install CM from there, but then I can't even enter it (all commands through fastboot work just fine), which is a pretty bad sign I guess. Then I flashed stock 5.1.0, and nothing changed.
Click to expand...
Click to collapse
That does not sound good at all...
Himeko7 said:
I just got a broken Nexus5 with a boot-loop issue. As soon as the Google logo appears it reboots. I can enter booloader normally but if I select recovery the same happens, reboot. I unlocked the bootloader and flashed TWRP in, same thing. Tried to flash full stock 5.1.1, same thing.
Any ideas?
Click to expand...
Click to collapse
Power button issue?
zagorteney said:
Power button issue?
Click to expand...
Click to collapse
I don't think so, phone stays in bootloader indefinitely until I reboot or try to enter recovery.
Hi,
I tried yesterday to return my Nexus 5 to a stock image so that I could do OTA updates. I realised after that I also had to return it to stock recovery because TWRP was not letting it work.
using this tutorial, I booted into the latest TWRP image, which only caused my phone to go into a boot loop, only making it as far as the Teamwin screen. The phone will not load the bootloader to do anything with fastboot.
what are my options?
t.holley.os said:
Hi,
I tried yesterday to return my Nexus 5 to a stock image so that I could do OTA updates. I realised after that I also had to return it to stock recovery because TWRP was not letting it work.
using this tutorial, I booted into the latest TWRP image, which only caused my phone to go into a boot loop, only making it as far as the Teamwin screen. The phone will not load the bootloader to do anything with fastboot.
what are my options?
Click to expand...
Click to collapse
What do you want to do exactly? Restore stock recovery so that you can take the OTA? If you followed either one of the methods on that thread, you should already be stock, i don't get why you booted TWRP again.
Hi,
As I mentioned, following that tutorial, I just booted into the TWRP image. It wasn't that tutorial I used to flash the stock image. All that I did was get back to the stock android.
I originally did try using their method, but wasn't able to get the .sh script to run so I used another tutorial to flash the android image, but didn't have a boot or recovery that I flashed. I was able to download the update now and tried installing, but it would take me to the TWRP recovery and say that the update failed.
I was following the optional steps at the bottom, thinking that was what I needed to lock everything back up, clearly that wasn't right.
t.holley.os said:
Hi,
As I mentioned, following that tutorial, I just booted into the TWRP image. It wasn't that tutorial I used to flash the stock image. All that I did was get back to the stock android.
I originally did try using their method, but wasn't able to get the .sh script to run so I used another tutorial to flash the android image, but didn't have a boot or recovery that I flashed. I was able to download the update now and tried installing, but it would take me to the TWRP recovery and say that the update failed.
I was following the optional steps at the bottom, thinking that was what I needed to lock everything back up, clearly that wasn't right.
Click to expand...
Click to collapse
Just flash the stock recovery image with fastboot
Sent from my Nexus 9 using XDA Free mobile app
That's what I am asking...I can't load into anything on the Nexus to use fastboot, it is stuck loading into this TWRP image.
t.holley.os said:
That's what I am asking...I can't load into anything on the Nexus to use fastboot, it is stuck loading into this TWRP image.
Click to expand...
Click to collapse
Press and hold power for 30 second, the device will try to boot but just keep holding the power. Then press and hold vol down and power. It doesn't boot into the bootloader?
Sent from my Nexus 9 using XDA Free mobile app
Hi,
I tried this again today and was able to get into it. Yesterday it didn't want to boot into it for some reason. Followed the tutorial I posted from the start to re-flash everything, and so far seems to be working. Hasn't loaded into android yet, just stuck on the loading screen, hoping it's just the initial start up that sometimes takes a while.
t.holley.os said:
Hi,
I tried this again today and was able to get into it. Yesterday it didn't want to boot into it for some reason. Followed the tutorial I posted from the start to re-flash everything, and so far seems to be working. Hasn't loaded into android yet, just stuck on the loading screen, hoping it's just the initial start up that sometimes takes a while.
Click to expand...
Click to collapse
FYI the TWRP boot loops are due to MTP bug that was never fully fixed from 2860. It's better than it used to be, but still an issue occasionally, especially if connected to power while you try to get in to TWRP.
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
atomkrieg said:
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
Click to expand...
Click to collapse
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
soupysoup said:
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
atomkrieg said:
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
Click to expand...
Click to collapse
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
soupysoup said:
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
in the end fastboot, since i coulndt see how i could copy the img over to install via twrp
im pretty sure the button is fine, since it was cycling from the ota update install, then was working fine unlocking the bootloader, but after the flash, it crapped the bed.
Different problem
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
siddhu007 said:
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
Click to expand...
Click to collapse
ok, took it into a shop, got the power button fixed. It must have been on the way out because literally one minute it worked and the second it didnt. now i think ive got it narrowed down. it's saying it's unable to mount /persist. ive tried the various fixes:
e2fsck/dev/block/platform/msm_sdcc.1/by-name/persist
and
make_ext4fs/dev/block/platform/msm_sdcc.1/by-name/persist
but all i get is a not found error. not sure what to do from here on.
success!! i ended up stumbling on a bit how to restore the persist partition i didnt try. got a custom rom installs and everything works. thanks to everyone who tried to help!!
stuck in bootloop while flashing cataclysm rom
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
When it was stuck in the loop, I had to hold vol up and down with the power button (wait a few secs until it was completely off) then reboot holding down + power till it opened the bootloader. if that doesnt work, try reflashing the bootloader via fastboot. I only found out i couldnt mount the persist partition by looking at the terminal window in twrp after trying to install a rom which kept it in the boot loop. I then used the cmd: make_ext4fs /dev/block/platform/msm_sdcc.1/by-name/persist to rebuild it.
jpau11 said:
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
Click to expand...
Click to collapse
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
audit13 said:
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
Click to expand...
Click to collapse
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
jpau11 said:
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
Click to expand...
Click to collapse
Great to hear it. Congratulations:good: