Related
Hello,
I was bought moto g 8 GB and i used it one day.
My phone does not work
I made factory reset and after that phone works but after 2 hours when i turn on phone, i see only Moto logo, after that he appeared black screen. I will record video tomorrow if you need it.
When i hold power down and power button i can see fastboot flash mode. I can see normally options in flash mode but also i see "Device is LOCKED". http://postimg.org/image/oa3blyd2n/
http://postimg.org/image/9pm8r4i3z/
When i click on recovery mode phone has restart and i see moto logo and black screen...
I wait 7 hours but nothing happened.
Please help me
Joomlar said:
Hello,
I was bought moto g 8 GB and i used it one day.
My phone does not work
I made factory reset and after that phone works but after 2 hours when i turn on phone, i see only Moto logo, after that he appeared black screen. I will record video tomorrow if you need it.
When i hold power down and power button i can see fastboot flash mode. I can see normally options in flash mode but also i see "Device is LOCKED". http://postimg.org/image/oa3blyd2n/
http://postimg.org/image/9pm8r4i3z/
When i click on recovery mode phone has restart and i see moto logo and black screen...
I wait 7 hours but nothing happened.
Please help me
Click to expand...
Click to collapse
The good thing about development phone like Moto G are that you can never brick your phone. It is very much recoverable. Try unlocking bootloader and then flash official firmware from this link http://sbf.droid-developers.org/phone.php?device=14
Use this link to unlock bootloader,
https://accounts.motorola.com/ssoau...ct/standalone/bootloader/unlock-your-device-b
You can bring your phone back to life.
Hope it helps.
smohanv said:
The good thing about development phone like Moto G are that you can never brick your phone. It is very much recoverable. Try unlocking bootloader and then flash official firmware from this link http://sbf.droid-developers.org/phone.php?device=14
Use this link to unlock bootloader,
https://accounts.motorola.com/ssoau...ct/standalone/bootloader/unlock-your-device-b
You can bring your phone back to life.
Hope it helps.
Click to expand...
Click to collapse
Or he can ask for replacement
Sent from Samsung Chat
jaspreet997 said:
Or he can ask for replacement
Sent from Samsung Chat
Click to expand...
Click to collapse
I would not wait for two weeks for replacement when we can bring the phone to life within 30min.
I agree a risk element in it. If the phone is basically faulty, then it is not worth trying the way I suggested. Has this worked before you started mess around?
Good luck..
smohanv said:
I would not wait for two weeks for replacement when we can bring the phone to life within 30min.
I agree a risk element in it. If the phone is basically faulty, then it is not worth trying the way I suggested. Has this worked before you started mess around?
Good luck..
Click to expand...
Click to collapse
If the phone is basically faulty (a potential hardware issue) the last thing one should do is unlock the bootloader and lose the warranty.
Sent from my Nexus 5
If you have ordered from flipkart Just call them and pretend that its not turning on at all.....and they will give you a hand to hand replacement!
I can return phone but it cost more then 60 EUR via DHL and i must wait long time...
Today i will try to unlock bootloader and flash firmware. Thanks you all, have you more suggestions?
I dont know what happened. This is strange problem because telephone work fine 5 hours and after power off, i see only Motorola Logo. I hope that i will not miss guarranty when i unlock bootloader.
Unlock device is finished. Can you give me tutorial for flashing stock firmware? I am noob
U used this tutorial: http://www.theandroidsoul.com/install-moto-g-uk-generic-firmwarestock-rom/
but after flashing i have the same problem
Is there any solution? If not, how i can lock bootloader because now i lose guarranty
Joomlar said:
Hello,
I was bought moto g 8 GB and i used it one day.
My phone does not work
I made factory reset and after that phone works but after 2 hours when i turn on phone, i see only Moto logo, after that he appeared black screen. I will record video tomorrow if you need it.
When i hold power down and power button i can see fastboot flash mode. I can see normally options in flash mode but also i see "Device is LOCKED". http://postimg.org/image/oa3blyd2n/
http://postimg.org/image/9pm8r4i3z/
When i click on recovery mode phone has restart and i see moto logo and black screen...
I wait 7 hours but nothing happened.
Please help me
Click to expand...
Click to collapse
I had exactly the same issue, after I unlocked the bootloader this happened to me, don't worry is not bricked just a software issue with some providers firmwares, what did I do? The good about this is, you should be able to put it in fastboot.
Read all before try it please
* I unlocked the bootloader (seems like you already did it)
* I flashed CWM http://forum.xda-developers.com/showthread.php?t=2563599
Here the next issue was I needed to flash a ROM but I wasn't able to put any file in my device even mouting the USB in CWM or adb push, so: sideload
* I downloaded this rom http://forum.xda-developers.com/showthread.php?t=2606943 (you could use other but that worked for me)
* I Put the zip file in the fastboot directory
* I turned on my device in recovery mode (CWM, you can do it by the fastboot, select recovery, use vol up to enter, vol down to move, power button doesn't work here).
* Wipe factory, cache and dalvik (just in case I think factory wipe is enough)
* I went to the option flash from zip file, flash from sideload (or similar not sure about the name but it says sideload)
adb sideload myromfile.zip
once the adb finish, CWM will notify you and you can flash your rom regularly. It will finish, then you should reboot, It should take about 5 minutes for the first boot. Then my phone worked again.
Sorry if I said something wrong, first time I talk here and I felt identified with your issue and wanted to help you.
Thank you. I flashed CWM but i can not enter to it. When i hold volume down + power button i enter in fastboot flash mode. How i can enter to recovery cwm? When i enter to recovery trough fastboot mode nothing happened. Phone has restart and appeared moto logo. When i flash it i got ".mismatched partition size".
Is there any tutorial for me ? I am very frustrated with this phone
sounds like the phone might be faulty if it happened and you didnt do anything to cause it ,
anyway another option for you is to try a external reset,you have attempted too flash other firmwares so not 100% sure it will work but give it a try through fastboot recovery.
click the link below and halfway down the page follow the instruction for "external reset"
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
This is my steps:
-Flash this falcon_retgb_user_4.3_14.10.0Q3.X-76-LGG-8_54_release-keys-cid7-Retail_GB via this tutorial http://www.theandroidsoul.com/install-moto-g-uk-generic-firmwarestock-rom/
-flash CWM V3 or V2
Do i need to flash some other stock ROM before i do external reset? EDIT; external reset does not work becase i can not enter to recovery and wipe data/cache...
smohanv said:
The good thing about development phone like Moto G are that you can never brick your phone. It is very much recoverable. Try unlocking bootloader and then flash official firmware from this link http://sbf.droid-developers.org/phone.php?device=14
Use this link to unlock bootloader,
https://accounts.motorola.com/ssoau...ct/standalone/bootloader/unlock-your-device-b
You can bring your phone back to life.
Hope it helps.
Click to expand...
Click to collapse
Except it isn't a development phone and of course you can brick it. Try erasing the bootloader and recovery and see how you get on then. Im pretty sure it'd be bricked??
To OP - you should have returned phone especially as you are a noob, no offence but a noob trying to recover a phone which has 'broken' by itself is not going to end well especially as its impossible to tell if its hardware or software issue in the first place.
I wish you luck though.
Joomlar said:
Thank you. I flashed CWM but i can not enter to it. When i hold volume down + power button i enter in fastboot flash mode. How i can enter to recovery cwm? When i enter to recovery trough fastboot mode nothing happened. Phone has restart and appeared moto logo. When i flash it i got ".mismatched partition size".
Is there any tutorial for me ? I am very frustrated with this phone
Click to expand...
Click to collapse
To get into CWM after flash it, go to fastboot mode, then in the menu, use ONLY vol down and move to the recovery option, once in the recovery option push vol up.
It also could be you phone has a fault from factory.
scott_doyland said:
Except it isn't a development phone and of course you can brick it. Try erasing the bootloader and recovery and see how you get on then. Im pretty sure it'd be bricked??
To OP - you should have returned phone especially as you are a noob, no offence but a noob trying to recover a phone which has 'broken' by itself is not going to end well especially as its impossible to tell if its hardware or software issue in the first place.
I wish you luck though.
Click to expand...
Click to collapse
You can perfeclty recover an erased or corrupt bootloader, and from there flash anything you want, including recovery. Yeah, it's an unbrickable phone.
http://forum.xda-developers.com/showthread.php?t=2623587
Joomlar said:
Thank you. I flashed CWM but i can not enter to it. When i hold volume down + power button i enter in fastboot flash mode. How i can enter to recovery cwm? When i enter to recovery trough fastboot mode nothing happened. Phone has restart and appeared moto logo. When i flash it i got ".mismatched partition size".
Is there any tutorial for me ? I am very frustrated with this phone
Click to expand...
Click to collapse
i got the same error, but i just kept flashing cwm like five times in a row then vol down then up and it loaded cwm.
try it.
Yes, it can be bricked depending on the version... Mine can't have the bootloader unlocked...
Sent from my XT1032 using xda app-developers app
I must return phone. My bootloader is unlocked, i hope that manufacturer will give me new phone.
IF you have any solution respond me please.
Maybe you could try this way http://forum.xda-developers.com/showthread.php?t=2542219 !?
Joomlar said:
I must return phone. My bootloader is unlocked, i hope that manufacturer will give me new phone.
IF you have any solution respond me please.
Click to expand...
Click to collapse
Your phone seems to be fine. the only option worth a try is to flash official firmware that should go ok with a locked bootloader forget about custom recovery and rooms
and in any case do not unlock the bootloader until you some how solve this and in the picture you posted the phone already is in flash mode just make your PC to recognize your phone by installing the necessary drivers and flash
Find everything you need in the post above mine
I decided to write a guide on how to recover from a bricked OnePlus One. This is my first guide.
About me: I am a newbie on Android.However, the XDA community has taught me a lot about my Android phone for the first month of using it. That's right! I have only been using Android for less than one month so take this guide with a grain of salt. But if you happen to soft brick your One, this is the guide to turn to. I have created two mind-bending/heartbreaking/frightening scenarios that I have experienced. Though, resolved thanks to this community.
Note: This will wipe your phone!
Scenario 1:
Soft bricked, (CM gear keeps spinning but won't boot to lock screen)
Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
How to find out if you have unlocked bootloader:
1. Locate the folder where you installed the OPO Toolbox.
2. Hold Shift and right click on ANY white area within the folder.
3. Left click 'Open command window here'
4. Type:
fastboot oem device-info
If it returns True on tampered. Then you have unlocked your bootloader.
I hope this guide helps solve your soft-bricked problem. Good luck!
I suggest that a mod moves this to the General section
pandasa123 said:
I suggest that a mod moves this to the General section
Click to expand...
Click to collapse
Report the thread if you think its necessary.
Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:
Digital Arm said:
Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:
Click to expand...
Click to collapse
You don't have an unlocked bootloader.
Transmitted via Bacon
timmaaa said:
You don't have an unlocked bootloader.
Transmitted via Bacon
Click to expand...
Click to collapse
Thx got it:cyclops:
Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
Hi i am stuck in scenario 2...I did all a u said but i cant flash CM XNPH22R ...where do i find this file...i cant find it on my phone either ..pls help ??
Thank god for this thread omg, saved my life
Locked Bootloader
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??
RiccoSuave said:
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??
Click to expand...
Click to collapse
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.
Champi12301 said:
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.
Click to expand...
Click to collapse
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.
RiccoSuave said:
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.
Click to expand...
Click to collapse
Then first you need to unlock the bootloader via fastboot,but that action erases all data. I assume,if you modified the boot via fastboot, USB DEBUGGING is working,so after try to do the softbrick tutorial of the thread.
Tecleado desde mi 1+1.
how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!
deanwinchester370 said:
how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!
Click to expand...
Click to collapse
Did you find a solution ?
I'm facing the exact same issue on my OPO.
>> bootloader locked
>> no recovery
>> impossible to unlock the bootloader
>> OPO stuck at 1+ logo and keep rebooting agin and again and again...
....i think my OPO is dead T_T
Is it a way to force the bootloader unlock ?
Please HELP !!!
Didn't work for me
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.
All done
davmeva said:
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.
Click to expand...
Click to collapse
No one replied to this but never mind, took me two days but I now have a working phone. So you can call in the dogs, cheers
hi davmeva
did you fixed your oneplus one till now or not because i have also same situation here and no success till now .
i did by mistake all this stuff and now nothing work still same condition
if you got any solution please share it
Hi guys greetings,(Hope everyone's doing good!)
I'm new here and on android, recently switched from ios,so bought a honor 3c international model and now I have emui 3.O on it and lurker 4.4.2.
And im really surprised by the android features and I like em and have decided to stick with android.
Root is one of its coolest features so I after some months using my phone decided to root and I was completely unaware of these terms like custom recovery, brick, boot loader,e.t.c.
After understanding the concepts I came to conclusion that I have to unlock boot loader first, then a custom recovery like twrp or cmw then that and that, so I followed the following link exactly like it is:
(Insert www)carbontesla.(insert com pls)/2014/08/guide-unlock-honor-3c-h30-u10-bootloader-using-sp-flash-tool/[/url]
After unlocking the boot loader I was "following" the procedure from link:
(Insert www pls)carbontesla.(insert com)/2015/06/root-honor-3c-on-emotion-ui-3-0-b320-firmware/[/url]
Code:
real problem now
After step 8 from the above link my phone does boots into the twrp recovery screen but becomes totally unresponsive of any touch or even the power, volume buttons. But it's screen turns off after 30 seconds(i think its that auto turn off screen to save power feature)when screen turns off by itself due to being idle THE POWER BUTTON WORKS bur after I once press power button the twrp recovery screen appears again and then again no touch, no power, volume button. I was so scared dafaq I have done to my phone so an idea flashed through my mind,i removed battery and connected phone to pc then i opened mkt_tools and installed super SU from there,then rebooted the phone(from mkt tools)and surprisingly my phone came back to its normal state,I swiped and found super su app,root manager opened su app and it said "not properly rooted"(of course I didn't expected it to be rooted because I wasn't able to go after step#8) and closes itself then another idea flashed through my mind so I went play store and updated super su and then opened it but it said no binary found and super su cannot install binary please root again properly...
I just want my twrp screen responding to touch or at least power/volume buttons because I have to reboot the device from the pc everytime(only if I take it to recovery)
After by help of you guys if I finally be able to get twrp screen then I can finally root the device by following the rest steps.
And my device isnot bricked I can use my phone still normal.
Another question I wanted to ask if I can replace twrp recovery with cmw recovery.
And can I remove this improper root somehow and start the whole root process again since I screwed with the mkt_tools
And the another damn mistake I made was to not made a complete backup.
I humbly request you guys to please help me, any help would be GREATLY appreciated,
Thank you very much,
Stay blessed,
bump
Hi,
SITUATION : I just had a big problem with my OP6. First of all, I was on Oreo stock Rom and I decided to upgrade to Pie by flashing .zip via TWRP. Everything goes well, but after some days of use and for some reasons I wanted to roll-back to Oreo and I flashed the downgrade .zip but this time via Local upgrade. Again, everything goes well but when trying to flash TWRP via Fastboot, I used "fastboot boot TWRP.img" and phone booted into it. Then, BEFORE flashing the TWRP.zip file I accidentally changed the slot (b to a) and rebooted to system.
PROBLEM : Now, the device is stucked on a black screen with withe notification LED on, and whatever the situation. Bootloader isn't accessible anymore. None of the buttons combination work properly. I don't know what to do. I looked for MSM software but do I need to access Bootloader to use it ? It's possible to power off the device (white LED turn off), but nothing more.
Thanks for any future advices
power off ur device !!!
open msm software and connect ur phone through usb and press up volume + power button and u will see it getting connected to the msm software and leave it till ur phone starts booting ito OOS 5.1.5
Here is the Link to the MsmDownloadTool V4.0:
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
With this Tool, you get your Phone working again.
StandBrik said:
Hi,
SITUATION : I just had a big problem with my OP6. First of all, I was on Oreo stock Rom and I decided to upgrade to Pie by flashing .zip via TWRP. Everything goes well, but after some days of use and for some reasons I wanted to roll-back to Oreo and I flashed the downgrade .zip but this time via Local upgrade. Again, everything goes well but when trying to flash TWRP via Fastboot, I used "fastboot boot TWRP.img" and phone booted into it. Then, BEFORE flashing the TWRP.zip file I accidentally changed the slot (b to a) and rebooted to system.
PROBLEM : Now, the device is stucked on a black screen with withe notification LED on, and whatever the situation. Bootloader isn't accessible anymore. None of the buttons combination work properly. I don't know what to do. I looked for MSM software but do I need to access Bootloader to use it ? It's possible to power off the device (white LED turn off), but nothing more.
Thanks for any future advices
Click to expand...
Click to collapse
I hope u fixed it by now, but if you still haven't fixed it yet, you can go back to slot b by using this commands "fastboot --set-active=B" without the quotes
Because I messed up my slot a, so i used that command to boot using slot b and it worked. So, if the problem is with your slot a and everything with your slot b is fine, then you just need to change to slot b with that command and all should go well :highfive:
just noticed that you're having a problem accessing the bootloader. First, make sure your device is not connected to your pc or anything. Then, whether your device is off or stuck in that black screen, just hold vol up and power off at the same time and wait until it eventually boots into the bootloader mode.
Problem solved with MSM software. Thanks everyone. If someone has the same issue. Just download MSM software and use the following guide :
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unbricking-tool-confirmation-t3733012
It is actually quite impossible to totally hardbrick a device like this one.
Cheers
Glad to hear that.
Just in case i got into that problem, could you lead me to the files you downloaded since the ones in that link seem to be for OnePlus 5
In my situation, I have a black screen, and a fixed blue LED.
I want to put the LineageOS ROM, but it's impossible, even though it performs the installation of the ROM correctly, when you restart it that happens, and then it doesn't even let you install or start the TWRP again.
It only remains to use MSMDownloadTool, to return to the Stock rom.
I have bought a used Samsung S10e (SM-G970F/DS) it came with Android 12 and it was reseted.
My goal is to install iodeOS. Even if the iodeOS website says "Update the stock firmware to the latest" I considered the instructions from LineageOS and installed the latest Android 11 version, following this (https://iode.tech/en/iodeos-installation/#1629185391421-4cf1f5c8-d900) uninstall instructions.
After Android 11 was installed I enabled the developer options. OEM-Unlock was not available. Therefore I followed these instructions (https://www.xda-developers.com/fix-...y-s9-samsung-galaxy-s8-samsung-galaxy-note-8/) and the OEM-Unlock was available again.
Now it seemed that everything is ready to install iodeOS or LineageOS. Therefore I followed this instructions (https://wiki.lineageos.org/devices/beyond0lte/install). It worked fine until "Installing a cutom recovery using heimdall"
after the "heimdall flash --RECOVERY <recovery_filename>.img --no-reboot" command the S10e shows a bar which is filled from the left to the right and then it shows "Custom Binary (RECOVERY) Blocked By OEM Lock"
Now I have no clue what to do :-(
I would be glad for any help.
You need to unlock the bootloader. You've toggled the OEM Unlocking switch, so unlocking the bootloader is the next step.
Make sure you have the Samsung USB drivers installed on your PC.
Turn off your device.
While holding the Bixby and Volume Down buttons, connect your phone to your PC.
The device should start in Download Mode. Hold down Volume Up until you get a warning about unlocking the bootloader. Unlocking the bootloader will wipe your data. Click Volume Up to confirm.
Your device will wipe data, then reboot. At this point, you can reboot to download mode and flash a custom recovery using Odin or Heimdall.
Thanks a lot for all your help!
The problem was I entered the download mode by the adb command "adb reboot-bootloader" and this mode seems to be different to the one which can be accessed by pressing the keys.
Now everything worked fine
I have exactly the same problem here:
SM-A205G with OEM Unlock enabled
There is no unlock bootloader in the bootloader no option anymore
at least in the bootloder of this edition
And I suppose that if it is the bootloader that flashes everything, it is COMPLETELLY LOCKED, could be jailbroken by some new method, but until them... no option :sad:
V0latyle said:
You need to unlock the bootloader. You've toggled the OEM Unlocking switch, so unlocking the bootloader is the next step.
Make sure you have the Samsung USB drivers installed on your PC.
Turn off your device.
While holding the Bixby and Volume Down buttons, connect your phone to your PC.
The device should start in Download Mode. Hold down Volume Up until you get a warning about unlocking the bootloader. Unlocking the bootloader will wipe your data. Click Volume Up to confirm.
Your device will wipe data, then reboot. At this point, you can reboot to download mode and flash a custom recovery using Odin or Heimdall.
Click to expand...
Click to collapse
It seems that this <confirm> option in the bootloader is being removed by samsung, so... even if unlock oem is enabled... it will not work...
I can only reach the bootloader by going to recovery mode them selecting reboot bootloader, or by adb reboot bootloader, but it boots directly in download mode without the option to long-press volume up key
A flasher that doesn't flashes doesn't makes sense. Maybe samsung have hidden something new in there?...
Ok. I've found the solution
1 - Power the phone off
2 - Hold both volume up and down
3 - PLUG THE USB BUTTON WHILE YOU HOLD BOTH these buttons
4 - NO NEED TO PRESS POWER BUTTON
I guess this will work for all phones that don't have the option to start with power+down
Yes. A flasher that does not flash don't exists.
Good luck ! \o/
source:
HELP!!! Custom Binary (BOOT) Blocked By OEM Lock
Hi there, I've been having trouble rooting my Samsung Galaxy A20 - SM-A205GN for awhile now. I'm officially on Android Version 10 with One UI Version 2.0, I've followed the provided guide to root my device but it fails on Odin "all versions" when...
forum.xda-developers.com
wavedevice said:
Ok. I've found the solution
1 - Power the phone off
2 - Hold both volume up and down
3 - PLUG THE USB BUTTON WHILE YOU HOLD BOTH these buttons
4 - NO NEED TO PRESS POWER BUTTON
I guess this will work for all phones that don't have the option to start with power+down
Yes. A flasher that does not flash don't exists.
Good luck ! \o/
source:
HELP!!! Custom Binary (BOOT) Blocked By OEM Lock
Hi there, I've been having trouble rooting my Samsung Galaxy A20 - SM-A205GN for awhile now. I'm officially on Android Version 10 with One UI Version 2.0, I've followed the provided guide to root my device but it fails on Odin "all versions" when...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes, you don't unlock the bootloader VIA the bootloader in Samsung phones.
so you know what happened? I accidentaly reset my phone! I have gone into download mode and there was additional choices: to unlock bootloader holt volup, so I did, then again to confirm unlocking press volup. I did so and then there was for a brief moment android logo and "erasing" and then after about 2 minutes of just Samsung logo phone restarted and asked me to perform setup as it was new! WTH? There was nothing mentioned about deletion
DaHansi said:
I have bought a used Samsung S10e (SM-G970F/DS) it came with Android 12 and it was reseted.
My goal is to install iodeOS. Even if the iodeOS website says "Update the stock firmware to the latest" I considered the instructions from LineageOS and installed the latest Android 11 version, following this (https://iode.tech/en/iodeos-installation/#1629185391421-4cf1f5c8-d900) uninstall instructions.
After Android 11 was installed I enabled the developer options. OEM-Unlock was not available. Therefore I followed these instructions (https://www.xda-developers.com/fix-...y-s9-samsung-galaxy-s8-samsung-galaxy-note-8/) and the OEM-Unlock was available again.
Now it seemed that everything is ready to install iodeOS or LineageOS. Therefore I followed this instructions (https://wiki.lineageos.org/devices/beyond0lte/install). It worked fine until "Installing a cutom recovery using heimdall"
after the "heimdall flash --RECOVERY <recovery_filename>.img --no-reboot" command the S10e shows a bar which is filled from the left to the right and then it shows "Custom Binary (RECOVERY) Blocked By OEM Lock"
Now I have no clue what to do :-(
I would be glad for any help.
Click to expand...
Click to collapse
I had the same problem on my samsung tab a10.1. That's why I had to flash the stock firmware 3 times. Every time I flashed twrp with odin, I got the error (custom binary blocked by oem lock).
I write what they should do in order.
1. Turn on the phone.
2. Open Developer mode
3. USB debugging mode - on
4. oem unlocking - on
5. then turn off the phone and disconnect from usb
6. Connect the phone to the PC with USB by holding down the volume up and volume down buttons at the same time. WITHOUT PRESSING THE POWER BUTTON
7. Press and hold the volume up button according to the instructions in the pop-up window.
oem unlocked
Sorry that, I had another problem. May I know how to unlock the OEM if my S10e phone can't turn on.
My device always on "samsung" display page, can't open to index. Do you know this issue? Expecting your reply.
Hi! I have the same issue on my Xiaomi Mi 11 Pro (It was Chinese) but it came unlocked with xiaomi.eu rom.
After i installed a global rom, and google wallet nfc pay did not work, so i thought okay i will lock it then so maybe wallet would accept it, (with the eu rom it worked before) so i put the device in fastboot and used fastboot oem lock on cmd...
And from then it stucks on miui recovery 5.0 screen, and says, this miui version can't be installed on this device...
I might not enabled oem unlocking before i shut if off, but i added it to my mi account so i dont know if after a week i can maybe unlock it. But i think the other possible solution would be to sideload the original chinese stock rom, which is for M2102K1AC, Mi 11 pro, codename mars, but i couldn't find it anywhere... If someone can upload a link to it, that would be a huge help! Or any idea! thx!
geraldmany said:
HI! i got a mi 11 pro 1 year ago, and it was offically chinese, but it came unlocked with Xiaomi.eu firmware, but i could't update it via the updater app, so i searched and found the global star version and just flashed it, everything worked, only now google pay nfc didnt work, it said that its probably because of the unlocked bootloader, so i got to fastboot and in cmd i sent fastboot oem lock, and since then my phone is stuck in miui recovery 5.0 screen and says that i cannot run this firmware on the device, i tried to unlock it but failed, maybe after a week, but i think that i didnt turn on oem unlocking on the phone itself before this... So im just hoping that after a week unlocking could be done... Or my other idea is, that i could install the original chinese rom with sideload, because i managed to install another global version on it since, but the result is still the same, the only problem is that i cannot find literally anywhere a mars codenamed firmware...
Click to expand...
Click to collapse
Anyone who might have the same situation, i found a simple, but effective solution, not sure if it works on every xiaomi device, but i will write down the steps here:
You need to use XiaomiADB, here is the download link and the description for how to use it -> https://xiaomiui.net/how-to-use-xiaomiadb-8044/ (if the page is not available, then feel free to msg me!)
For xiaomi adb, you need to go to 3rd option on the miui recovery screen, NOT THE FASTBOOT
So basically i went through the steps to “xiaomiadb sideload_miui <filename>”
And I tried to install a rom, BUT IT DIDNT ACCEPT IT!
The message was:
ERROR: This rom cannot be installed, server code -> 2001, server message -> Can't install unofficial rom
after trying 4 times all the same and: Installation of this rom via stock recovery is not allowed by Xiaomi
Says Installation failed, and then i just decided to download another rom so i PLUGGED OUT THE PHONE right after this, and went to another room to connect to wired network, to download and try a different rom... when i came back, to all my surprise, the phone was turned on, so i went to the setting dev ops and enabled bootloader unlocking, linked it to my account enabled adb and everything that is needed to flash another rom later, so then i rebooted and again, miui recovery 5.0 screen, but now i enabled unlocking, so i put the phone in fastboot, and tried MI UNLOCKER TOOL again, now it says: Please unlock 168 hours later. And do not add your account in MIUI again, otherwise you will wait from scratch.
So that means, after 7 days i wll be able to unlock it, until then, i can turn it on with the above method, in short try to sideload (copy and install) a rom to it, and then after it failed, plug it out and just wait like 10-20 maybe 30 seconds and bam your device is normally booted... I hope it helps to some of you, (i have been searching for the solution for almost a week, my other option was to pay someone who can MAYBE do it or send the phone back to china and pay the repairs, so im really happy with this method! If it helps to you, please reply so i and the others will know that it worked! Have a nice day!