Q&A for [ROM][UNOFFICIAL][KKBL][xt926][xt925] Dirty Unicorns 5.1.1 [05-25-2015]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UNOFFICIAL][KKBL][xt926][xt925] Dirty Unicorns 5.1.1 [05-25-2015]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I have this problem, this package is for devices with 4.4 bootloader as with this bootloader, how should I proceed?
xt925 twrp 2.8.6.0
---------- Post added at 05:00 AM ---------- Previous post was at 04:57 AM ----------
My Cell is xt925 using twrp 2.8.6.0
I received error on TWRP and CMW "This package is for devices with 4.4 bootloader as with this bootloader", how should I proceed?
TWRP 2.8.5.0 apparently doesn't exist for XT925?
Edit: Ok I've found a version for XT925 but the touchscreen doesn't work and now my phone won't reboot anymore?! T-T
Do you think this is flashable via apps like Flashify?
budswarez said:
I have this problem, this package is for devices with 4.4 bootloader as with this bootloader, how should I proceed?
xt925 twrp 2.8.6.0
---------- Post added at 05:00 AM ---------- Previous post was at 04:57 AM ----------
My Cell is xt925 using twrp 2.8.6.0
I received error on TWRP and CMW "This package is for devices with 4.4 bootloader as with this bootloader", how should I proceed?
Click to expand...
Click to collapse
Install the stock 4.3
Update to 4.4 via Stock ROM
Unlock KKBL (again, even you had unlocked before at 4.3 (JBBL))
Flash KKBL Roms
something like that as I remember
Related
Q&A for [DEODEXER] [D2303] [4.4.2] 18.3.C.0.40 Deodexed, Flashable Zip
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEODEXER] [D2303] [4.4.2] 18.3.C.0.40 Deodexed, Flashable Zip. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can someone tell me the steps to install it? i have 4.4.2 versión (.39), can i flash the original with flashtools or i need to do all?
Furix89 said:
Can someone tell me the steps to install it? i have 4.4.2 versión (.39), can i flash the original with flashtools or i need to do all?
Click to expand...
Click to collapse
Flash the .40 version of firmware vie flashtool. then flash the kernel with CWM. Reboot to recovery. In recovery flash the superuser zip and the deodexed zip. Reboot! Thats all!
dotzi75 said:
Flash the .40 version of firmware vie flashtool. then flash the kernel with CWM. Reboot to recovery. In recovery flash the superuser zip and the deodexed zip. Reboot! Thats all!
Click to expand...
Click to collapse
F**CK, i'm trying to flash the .40, but flashtools say that all time:
29/050/2014 19:50:39 - ERROR - Drivers need to be installed for connected device.
29/050/2014 19:50:39 - ERROR - You can find them in the drivers folder of Flashtool.
i can't find the drivers (i''m tried with the drivertool but M2 ddidn't appeared...)
i flashed one month ago and i have the same problem...
---------- Post added at 07:13 PM ---------- Previous post was at 06:53 PM ----------
Okay, i al ready know the probolem.... i'm Windows 8.1 user, i try to open a link of XDA but it wasn't found...
Can someone give me the link for download the patch for Windows 8.1 versión ?
Thank you so much!
Q&A for [ROM][5.0.2][STOCK]Asian 5.0.2 Flashable zip![DUAL SIM]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][STOCK]Asian 5.0.2 Flashable zip![DUAL SIM]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello,
Can i flash with CWM v6.0.4.7?
vbnoob said:
Hello,
Can i flash with CWM v6.0.4.7?
Click to expand...
Click to collapse
Give a try
Sent from my XT1033 using XDA Premium 4 mobile app
i'm on mahdi 4.4.4
i have gpe converted xt1033. do i need to change the filesystem too for installing this since gpe uses ext4 filesystem and stock uses f2fs . If that is so, then what else do i need to install this zip. ?
Flicking Screen!
Flicking screen... when i restart my fone always flicking for 5 mint
Download not working ?
Can't download the file !. network error at 99%. please provide mirror for mega or dev-host if possible.
Also, is radio included or i have to flash 4.4.4's radio ?
done with CWM 6.0.4.7
---------- Post added at 04:48 PM ---------- Previous post was at 04:37 PM ----------
SivaMotoG5.0 said:
Flicking screen... when i restart my fone always flicking for 5 mint
Click to expand...
Click to collapse
i have the same problem , even in boot screen
Flicking Screen!
1. my screen flicking..
2.Cant use play store..
3.cant go back to 4.4.4
SivaMotoG5.0 said:
1. my screen flicking..
2.Cant use play store..
3.cant go back to 4.4.4
Click to expand...
Click to collapse
Screen flicker is caused by kernel, turn screen off / on and it will stop. Close play store in task list and restart it. Regarding 3: (TWRP does not fully support Lollipop yet)
http://forum.xda-developers.com/showpost.php?p=58115383&postcount=64
http://forum.xda-developers.com/showpost.php?p=58115528&postcount=66
Will it work on non-rooted device?
I have a non-rooted XT1033, will it work by just placing the flashable zip in the folder and running "Check Updates".
I did this when i updated my phone from 4.4.2 to 4.4.4 and it worked
i am currently on cm12 unofficial by bharat_goku. i was wondering if the screen flickering exists in this rom or not?
Q&A for [CM11][Official] Cyanogenmod Support Dropped
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [CM11][Official] Cyanogenmod Support Dropped. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
pity that there is no free way to unlock bootloader on non-dev ultras
When I install the nightlies it just gets stuck on the bootlogo. I'm using the latest TWRP and am on Droid Maxx 4.4.4 23.3.23 obake.
---------- Post added at 10:46 PM ---------- Previous post was at 09:48 PM ----------
Well I installed cm11 for msm8960dt then installed cm12 obake and it worked. The only issue is it will boot up then after 10 seconds it will soft reboot. I've tried wiping cache, data and system. Any solutions?
in the thread for cm 11 they mentioned that flashing the lp gapps fixes reboots. i would assume you have tried that
dz93 said:
When I install the nightlies it just gets stuck on the bootlogo. I'm using the latest TWRP and am on Droid Maxx 4.4.4 23.3.23 obake.
---------- Post added at 10:46 PM ---------- Previous post was at 09:48 PM ----------
Well I installed cm11 for msm8960dt then installed cm12 obake and it worked. The only issue is it will boot up then after 10 seconds it will soft reboot. I've tried wiping cache, data and system. Any solutions?
Click to expand...
Click to collapse
You need the the correct recovery see the main thread for instructions and the recovery the nightlies run perfect no issues at all
Sent from my DROID Ultra
---------- Post added at 10:55 PM ---------- Previous post was at 10:54 PM ----------
szoniu said:
pity that there is no free way to unlock bootloader on non-dev ultras
Click to expand...
Click to collapse
Mine is a none dev ultra and i unlocked mine just fine
Sent from my DROID Ultra
Androidreviewguy, how you do that?
SunShine does not work for me either
The recovery isn't my issue. I must have missed the part about installing gapps. I installed the latest version of gapps for CM12 and android 5. Now CM12 boots up with no issues. However when one issue goes away another always follows. I can't seem to get Google play working. Gmail logs in fine and my Google account works but Google play keeps givibg me a no connection error. I'm logged in on Google play it just won't connect. I have tried modifying the host file without success. As far as modifying the host file any other solutions offered are just uninstalling the app, reinstall, clear cache, etc and I'm sure that won't work for me. Maybe its an issue in CM12 itself but others have reported working Google play so what could I be missing?
Thanks for all the help so far.
[Q&A] [ROM][CM12][NX Rom 2.0.0- Full Google Nexus Experience] {KK-LP Bootloader}{Dua
Q&A for [ROM][CM12][NX Rom 2.0.0- Full Google Nexus Experience] {KK-LP Bootloader}{Dual Sim}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM12][NX Rom 2.0.0- Full Google Nexus Experience] {KK-LP Bootloader}{Dual Sim}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bootloader
Will locking and unlocking again my bootloader erase off all my memory? Like it does when we unlock it for the first time.!
Thank You
---------- Post added at 03:38 PM ---------- Previous post was at 02:38 PM ----------
Umm.. Is it for my phone or did this rom not have a pre-installed gallery app? Any alternatives for that app?
chopradiv said:
Will locking and unlocking again my bootloader erase off all my memory? Like it does when we unlock it for the first time.!
Thank You
---------- Post added at 03:38 PM ---------- Previous post was at 02:38 PM ----------
Umm.. Is it for my phone or did this rom not have a pre-installed gallery app? Any alternatives for that app?
Click to expand...
Click to collapse
Quickpic is best gallery app ever :victory:
Direct call and smart sensors
Hi. I m using this rom and, for now, it's better than others. Can I use direct call or smart sensors (like Galaxy S3) on this rom or how can I use?
Sorry for bad English
Whats ROM files 5.0.2 you flash in fastboot
---------- Post added at 11:55 PM ---------- Previous post was at 11:51 PM ----------
can attach files to correct GPS
How can I can rid of the carrier label at the top corner.
Thank You.
best ****in' rom that I've ever tried, mate. Just one issue that I saw is that everytime that I reboot the phone there is not signal and just came back when I use the dialer app. Any suggestion?
Error
Da bootloop to install new themes mistake, it's as if the subject did apply the cache and wipe partition and stays on restarts
Thanks for Rom
cOMING FROM GPE?
Can we flash this rom coming from GPE 5.1?
Broken Link
Mega Link is broken please share mirror
GPE 5.1
Can we flash it comming from GPE 5.1 firmware??? or a data format to f2fs its needed?
NX 2.0.0 ROM for MOTO G
Very nice rom, its been a week now that I am using this rom. Is there any way to remove the google+ and some other apps included in this ram. I tried root uninstaller apps, but no success.
i did clean flashing but still am getting no sim in second sim notification area... is it problem with cm or nx rom???
NX ROM 2.0.0 dual sim not working on moto g xt1033
Please help...
Installed v9.6.2 performance is good but i faced one problem, got a message notification when i tried to unlock phone to see it the phone became unresponsive. When i restarted my phone the message notification and message was gone and phone booted in default theme and the installed theme got deleted!
Besides the stock email app is missing...
---------- Post added at 09:35 AM ---------- Previous post was at 08:51 AM ----------
Also lens blur mode in camera app keeps crashing...
!
I have the same "problem", the space between the icons, Sim Card and Battery! (SIM CARD HIDE)
Stagefright vulnerable
ROM is Stagefright vulnerable.
Any idea if the fix is coming soon?
Am having xt1032 intend to flash 10.0.4 may I ask what is the recommendation for custom recovery?
Q&A for [Share][ROM] [Official] Cyanogenmod Rom for YU Yuphoria , Codename: Lettuce
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Share][ROM] [Official] Cyanogenmod Rom for YU Yuphoria , Codename: Lettuce. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
flash tools for yuphoria
hi...can u provide flash tools for yuphoria to go into stock rom..because i am not either in srock rom or twrp none in my phone pls provide
K........
---------- Post added at 10:33 AM ---------- Previous post was at 10:23 AM ----------
Abhijith Kolipaka said:
hi...can u provide flash tools for yuphoria to go into stock rom..because i am not either in srock rom or twrp none in my phone pls provide
Click to expand...
Click to collapse
Follow me at yuplaygod
Cant post the link
---------- Post added at 11:21 AM ---------- Previous post was at 10:33 AM ----------
Abhijith Kolipaka said:
hi...can u provide flash tools for yuphoria to go into stock rom..because i am not either in srock rom or twrp none in my phone pls provide
Click to expand...
Click to collapse
search for flash stock roms at yuplaygod site you will definitely find mine post
While i have inserted both the sim, is it possible to turn off any of the sim from settings sim cards option ? i frequently require this and in my android one it is not possible due to hardware limitations. Guys please check once and reply so that i can decide to purchase or not.
kushal_w8 said:
While i have inserted both the sim, is it possible to turn off any of the sim from settings sim cards option ? i frequently require this and in my android one it is not possible due to hardware limitations. Guys please check once and reply so that i can decide to purchase or not.
Click to expand...
Click to collapse
I cant remember about the stock rom, but the feature exists in cm12 rom.