Database Info

[Q] screen flicker during boot xt1033

Guys im using xt1033 i converted it to gpe 4.4.4 and tried updating it to 5.0.1 via otg sideload and i got stuck in Google unlocked logo and so that i flashed stock rom again.after that whenever i boot my phone or whenever im in recovery there is a line orginating from top and flows till the bottom continuously. This stops only when i turn off the screen after boot and turn it on. Then my phone works normally. I wanted to know that weather this is a problem due to flashing? Or due to hardware? Or something else ? Need solution for getting rid of this. I also wanted to know that weather i can flash roms with this problem ? Im scared that my phone will not work if i flash something with this problem. Guys please get me through this... Thanks in advance...

Be patient and there will soon be a permanent fix for this issue.:laugh:
Locking and then unlocking the screen may be the best solution till now.

solved
I flashed android 5.0.1 gpe again and the problem is gone now my phone works fine

[Q] Software-related proximity sensor issues... in ALL roms after some modding

Situation is kinda strange.
Yesterday i was bored and i started to flash some roms on my OPO. I started with the latest ColorOS that i found here on XDA, but i didn't like it. So i flashed PA 4.6 beta 6. I noticed that the red boot logo of colorOS remained despite the full wipe of the internal storage. And the fastboot mode started to show some chinese characters instead of the regular ones.
But that's not the problem. Problem is that this morning i wasn't able to turn off a call because the screen turns off every time a call is made and there's no chance to turn it again on. The only thing i could do is to long press the power button and reset the phone. The call starts, the speaker works, the screen turns on and you can't do nothing than this.
I said "ok, it could be the PA rom, it's in beta, y'know"...So i flashed the PA stable and...same problem.
Then i tried the first rom i saw (vanir lollipop, last build) and...same problem? WTF?
Now i'm flashing the original 44s by fastboot and see what happens. In case nothing happens with the fastboot way, i will try to flash it by recovery. But i have a bad feeling about this.
Any similar experiences? I will keep the thread updated for people with the same problem.
EDIT 1: ok, after the fastboot flash of the cm11 44s i'm able to make calls without those problems. It will be amazing if the problem were still there.
EDIT 2: i have to say that the chinese fastboot and the red logo are gone now.

The reason your proximity sensor stopped working was because of the modem you flashed while you flashed ColorOS.
I flashed ColorOS aswell and has the same proximity sensor issue after flashing back a CM11 rom.

mumaster20 said:
The reason your proximity sensor stopped working was because of the modem you flashed while you flashed ColorOS.
I flashed ColorOS aswell and has the same proximity sensor issue after flashing back a CM11 rom.
Click to expand...
Click to collapse
Damn! I knew it!
That terrible ROM messed up all my phone -_-

motog xt1032 and cm11 issues

Hi
I have installed TWRP, and through that recovery, i have flashed the device with cyanogenmod CM11 (cm-11-20140504-SNAPSHOT-M6-falcon.zip)
After installing it, when the telephone starts, the screen shows a white line on top of the screen and sudenly the screen starts to flash, and loops again
To make it worst, if i restart and enter in the bootloader (power and vol down) it doesnt go into the bootloader and tries to start again
Any suggestion?
Thanks

Issue solved. I managed to get into the bootloader and flashed with another version
Looks like graphics didnt work. The phone was starting and working but nothing was displayed in the screen

javixeneize said:
Issue solved. I managed to get into the bootloader and flashed with another version
Looks like graphics didnt work. The phone was starting and working but nothing was displayed in the screen
Click to expand...
Click to collapse
Questions about the XT1032 Moto G should be ask here.
http://forum.xda-developers.com/moto-g/help
not General

YU Yuphoria on CM bootloops sometimes?

So I bought the YU Yuphoria on stock Android(5010A) and installed CM 13.0 (nightly build) and have been facing a minor problem. Sometimes when I boot the device after powering it off, it will display the YU logo, then restart and then display the YU logo, then again restart and this goes on for 2-3 times and then the device boots into CM. This does not happen every time and is random. Is this an issue with ROM or an issue with the device?

Same problem.. And sometimes imei null.. Really regretting buying this phone

I guess we get what we paid for
I have been seeing the same issue happen with my Yuphoria randomly. When it happens, it reboots 4 times before starting to boot CM 13.
Previously I had endless reboots at the Yu logo with CM when both the SIM slots had SIM cards inserted. The official COS 12.1 build booted without any errors, but the second SIM was always not detected. After flashing the radio from the official stock android ROM (my phone is a YU 5010A), the second SIM works.

lgp171188 said:
I have been seeing the same issue happen with my Yuphoria randomly. When it happens, it reboots 4 times before starting to boot CM 13.
Previously I had endless reboots at the Yu logo with CM when both the SIM slots had SIM cards inserted. The official COS 12.1 build booted without any errors, but the second SIM was always not detected. After flashing the radio from the official stock android ROM (my phone is a YU 5010A), the second SIM works.
Click to expand...
Click to collapse
Can you please tell me how you exactly solved that issue, as I too have the same type of problem... Thank you

please share path from where official android stock can be downloaded

Same problem with lineage OS and resurrection remix OS.

Resurrection remix_ Lenovo k3 note_screen replacement_wake up issue

Hi,
I have been using latest resurrection remix 5.8.5 on my
Lenovo k3 note . I have dropped my phone which damaged my lcd screen. I went for screen replacement.
After screen replacement when I power on my phone it starts out with no problem and everything is fine . When I lock my screen and wake up my device the screen does not wake up and shows black screen but touch works. when I power on again after removing battery everything is fine till I lock my screen and same problem visits again.i tried to install lineage , miui 9 it shows the same problem.
Then I flashed the stock rom from Lenovo now everything is fine and screen locks and wakes up normally.
The problem exist only for custom ROM.
Please help me to solve this issue as I am very much interested in Having custom ROM in my mobile
Thank you for your help in advance.