Followed a couple of online tutorials on replacing a cracked LCD and I cannot get the digitizer to work after assembly....I've read that occasionally the flex ribbon cable to connect the display assembly is fragile enough to get damaged - this is the only possible issue I can surmise is the problem...Yet, I'm not convinced I damaged it
Screen looks good but touching the screen results in no changes
Anyone with any experience or thoughts to remedy this?
I had a flex ribbon partially disconnected in my infuse 4, it distorted the color of the LCD screen. I would think it possible, if it were damaged or disconnected. Could possibly be the solder came loose. just guesses though, but otherwise the ribbons are generally pretty tough I think.
Related
Hi,
I have just replaced LCD and digitizer of my HTC raph (first time) and there seems to be some kind of problem. It turns on, but the screen shows nothing just lights up a little bit and there are some stripes visible as if the lcd would be broken, but it's brand new. The stripes changes a bit as i press some buttons or touch the screen so the phone and touchscreen are working - the problem is with LCD.
I don't know if i put all the conducting tape to the places it originaly was. Could that be a problem? I double checked all the connections but still, might be a contacts problem?
Any thoughts on what might cause this?
Also the phone got kind of hot after having it charged for some time, is that normal?
Of course, this may be caused by a bad connection (but rather hard to go wrong slot), but at a distance hard to say something more concrete.
Best to check with the new flex.
Thank you for the answer, i will try changing the main flex.
The flex cables can touch eachother right? Since they're originally covered with conductive tape.
BTW, i also intend to change the lcd + digitizer... my question is:
how to apply the digitzier? lcd and digitizer came separated - do i have to solder/glue or whatever the flex (of lcd & digi.)?
The original was something like sticked together... reminds me on sellotape aka Scotch Tape.
Can you give me a some help?
thanks
The ribbons must be solded together, there's 4 contacts on them and they should not touch eachother.
I know this is a hardware question, but I'm hoping someone might have an answer.
My son cracked the screen on his Galaxy S Blaze. I ordered a replacement screen assembly and found a video which I thought showed how to replace the screen, but it was for a different model. I have the cover off, the flex cables disconnected and the motherboard out, but I can't figure out how to remove the old screen from the front housing. Based on the other video, it should be a combination of heating the edge of the housing with a hair dryer until the adhesive softens, then prying it off. I've tried to do this with no luck, but it could be that I'm not prying hard enough - kinda scared to break it.
Does anyone know how to remove the screen - or better yet, know of a disassembly guide for the Galaxy S Blaze?
Thanks!
Heat, Heat and more heat...
Be careful with the heat as it can destroy amoled
a little off topic but...
One of the pins on my usb port got damaged. I was curious and took off the cover to have a look at what would be needed to replace it.... too much soldering that is above my skill level. Anyways, in the process of removing the cover, I lost functionality of my hardware buttons. I'm assuming I damaged the cables that attach them to the mobo. Didn't notice this until I put the cover back on and booted up. Does that seem right? Was I just being too harsh while taking it apart and ripped a ribbon or something of the like?
I cracked my phone screen yesterday after getting it repaired. ($60) bucks gone. I figured I'd fix it myself. I actually did it. I noticed it wasn't getting any signal at ALL, I always get 4 bars inside my room and I remembered that I had moved the RF cable with the screwdriver that was magnetized. I don't know if that might have been the problem. Well after I put it all back together I fudged the screen and I opened it back up and I discovered this after I took out the battery. Screenshots follow
http://i.imgur.com/OMAE9Yw.jpg
http://i.imgur.com/V5sGFpI.jpg
What isnt noticeable is that the metal clip furthest to the bottom that helps hold the RF cable is gone, I couldn't get it back into it. Does that matter? If so I need to get a complete assembly then.
Also note that the LCD screen is not cracked. But it looks like it is bleeding.
What I want to know is 4 things.
1. Is it fixable?
If not, I'll sell on Ebay for parts.
If it is. then do I
2. I want to know what could cause the LCD damage the way it is, is it from pressing to hard underneath it?
3. Do I need a new RF cable?
4. Is there a name for the flex piece that is in the pictures? I know it is tied to the power, volume and camera buttons. If their is a part, I'll take it to a professional this time.
I found the name of the piece, Its called a motherboard Flex cable.
But Im really wanting to know If I need a new RF cable because of touching the end piece with a magnetized screwdriver fizzed it out.
Thank you ahead of time.
I guess you'll need to replace your whole lcd screen along with the digitizer. You could easily get it on EBay.
About your antenna cable. I think it's damaged and that's the reason your not receiving any reception.
Few months back i replaced my lcd screen cause of some touch issue i think i accidentally damaged the antenna cable and now i dont receive reception in my room or college classroom. I have to move out to get reception.
Hi guys,
After trolling XDA for about two days, I finally figured out the way to solve my touch glitch issue with my OPO. It had rendered my phone UNUSABLE .
It was not the software(OPO solution) and it was not a grounding issue (solved with tape).
The solution was what causes most electronics to act weird, corrosion from moisture!
It came down to cleaning the flex connector to the digitizer with a soft bristle toothbrush and a small can of DeOxi.
After looking at the phone's design, the digitizer flex connection is right next to the second biggest opening in the phone chassis, the head phone jack.
With my OPO, moisture had migrated from the headphone jack opening and began corroding the very small connections on the digitizer flex connector and its connection point on the motherboard.
Most of the pins were gold colored, about 25% were green and corroded. What was funny was the more I cleaned them off, more of the screen became usable. This is how I knew it was the solution .
I used a small toothpick to get the crust off and scrubbed both ends of the digitizer connection, with the battery detached, as clean as possible with the DeOxi cleaning spray and the soft bristled toothbrush.
The corrosion was tough to remove, taking three separate clean-then-test rotations. I got really good at taking the screws and their annoying rubber caps off FAST!
After cleaning it is now two days later and my phone works AGAIN!
Hopefully, this will help you guys save about $70-80 buying a whole new screen/digitizer set.
Cheers!
I think this should go in General section instead of Q&A.
Anyways,good information,thanks.
Hi guys,
I have a Dasaita PX5 unit with Android 8.0 and 4 GB RAM.
I've bought it a few months ago and it was working fine until today the screen just went crazy.
The screen will start touching itself all over and enabling settings, or quitting my GPS software, or activating apps, or flipping through different screens etc.
I've tried to update the system software, update the MCU, and even a factory reset. The crazy screen issue still persist.
Any idea how and why my screen went crazy and how do I resolve it?
Thanks
Here is a short sample of what I meant by going crazy:
https://youtu.be/8ZcIXuc7MEw
I know exactly why and have had the same problem. There is a ribbon cable that comes out of the screen between the glass and LCD for the digitizer, its damaged the screens are so cheaply made the glass is still somewhat sharp and the cable kinks and breaks. . I actually just came on here to post if anyone knew where I could get a replacement besides Aliexpress.....
You should try reconnecting the ribbon cable, else just get yourself a screen replacement from where you bought the headunit.
I had similar issue where bottom part of the touch screen no longer register touches and as time goes by, the whole screen is completely "untouchable".
The root cause is that the ribbon between the unit and the screen panel connect to the mainboard is rubbing against the unit casing's sharp edges causes permanent damage. Fortunately, it is still under warranty and i have got a replacement panel, smoothed the casing edges and place some duct tape before replacing the panel.
BlinkyTrojan said:
You should try reconnecting the ribbon cable, else just get yourself a screen replacement from where you bought the headunit.
I had similar issue where bottom part of the touch screen no longer register touches and as time goes by, the whole screen is completely "untouchable".
The root cause is that the ribbon between the unit and the screen panel connect to the mainboard is rubbing against the unit casing's sharp edges causes permanent damage. Fortunately, it is still under warranty and i have got a replacement panel, smoothed the casing edges and place some duct tape before replacing the panel.
Click to expand...
Click to collapse
I just tried it and it got worst. :S
Someone with the answer?