Related
ZTE Z830: As some of you (who have recently broke your high-end devices like me!) know this is a cheap "GoPhone" you might have purchased as a replacement. As some of us know: the phones Hardware isn't bad for a low-end device. All very capable. The problem however; THE DAMN RESTRICTIONS ZTE HAS PUT ON THE PHONE.
Here are the problems in case you don't own a Z830:
No Apps are allowed on the SD-card
The bloatware cannot be uninstalled
Almost no internal memory (ZTE claims "4 Gigs of internal storage" but there is only around 800MB when disabling all unnecessary apps)
Anyways if you are stuck like me and have been suckered into buying this prepackaged paperweight. You most likely have one goal: ROOT IT. Which is the main point of this thread; as all of the other forum posts about this phone seem to be with people who have even less knowledge than I have about rooting. I want to figure out how to root this phone so it can live up to its capabilities.
I'm posting here about the methods I've been trying to root this phone with; so someone who has more knowledge about general rooting and coding then they can chime in and add some info.
First Attempt (FAILED) to Root the Device
ALSO KNOWN AS UPDATE.ZIPThe BREAKTHROUGH Information: I've managed to find the stock recovery from the phone's firmware. By pressing Volume Up + Power I got into the phones menu with various options to "update the firmware" It looks like this:
Android system recovery <
Z830V1 . 0 . 0B14
Volume up/down to move
highlight;
Press power to select.
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
apply update from sdcard
apply update from cache
md5 cache
So I tried to the original rooting method and this is what happened
-- Install /sdcard ...
(Installs about 25%)
Package corrupt.
Installation aborted.
So anyways: I would love some help trying to discover how to root this damn thing. If you own one of these and find some more breakthrough info I would love to know; because I am as well messing with this thing to see if this will ever work.
Just Tried TowelRoot. Doesn't support the z830.
Bump
I didn't want to post a new thread, is there any new information on this front? It doesn't seem like this was a popular enough phone to warrant it's own set of instructions
**************************************
A few of us were successful in finding a perm root. I know the phone has aged a bit now, but it really is a nice cheap spare phone without the bloatware.
The following instructions for the ZMAX worked perfectly but TWRP does not support the touch screen for the z830 so you have to use an OTG mouse to use TWRP. Touch functionality works fine once the entire process is complete. Uninstalling bloatware seems to have to be done with a 3rd party app such as Purify.
https://boycracked.com/2016/04/16/how-to-root-installing-twrp-v3-0-1-recovery-on-zte-zmax-z970/
I have this phone and have been trying various automatic root programs for some time. No luck.
qaz1233 said:
I have this phone and have been trying various automatic root programs for some time. No luck.
Click to expand...
Click to collapse
Yeah it seems like the phone uses some sort of bizarre coding.
........
I try everthing... nothing works....
all apps and PC methods fail...
Does adb work on your device? What are the different modes for your devices? Can you get into the bootloader?
Sent from my Z970 using XDA Free mobile app
TecheTag said:
Does adb work on your device? What are the different modes for your devices? Can you get into the bootloader?
Click to expand...
Click to collapse
Hey, I decided to pitch in as I also have this unfortunate phone. adb does in fact work, but it is crippled. I cannot perform "adb reboot bootloader" as it will simply reboot the phone normally. I tried to boot into the bootloader by pressing volume down+power and was entered into field test mode, as I have come to understand (says FTM on a white rectangle). Volume UP + power does put me in recovery mode, which is cool. Most interestingly, hold UP+DOWN+POWER mounts on my windows machine as ZTE handset diagnostic interface DFU... which apparently is made for flashing firmware with zte's own utility. adb reboot fastboot also just rebooted it normally.
if anyone knows of a useful test i could perform or a could point me towards new strategies i would appreciate it.
Well that sounds promising. It seems like we're breaking new ground here though.
830ingarg said:
Most interestingly, hold UP+DOWN+POWER mounts on my windows machine as ZTE handset diagnostic interface DFU... which apparently is made for flashing firmware with zte's own utility. adb reboot fastboot also just rebooted it normally..
Click to expand...
Click to collapse
Do you think there is something that can be used to flash our own custom firmware on it?
Please someone bump
I have the same phone and it's about worthless without root. Hopefully someone cam figure it out. I would even donate some cash for a solution.
Sort of temporary root achieved with KingRoot
So, I have this goofy phone and I did manage to get something that appears to be root using KingRoot. The PC version didn't work, and neither did TowelRoot or OneClickRoot. Downloading the apk for KingRoot and running it gave me root access, but only until I rebooted the phone. I managed to install SuperSU which allowed me to confirm that I had root. Unfortunately I was not able to uninstall any pre-loaded software while rooted via KingRoot or KingUser. KingRoot acted like it had successfully uninstalled the pre-installed software, but all it uninstalled were the updates. I didn't get a list of software when I tried to uninstall software via KingUser.
So we can boot into Recovery, and can get temporary root. Any ideas on how to get farther with this crippled phone?
pippinstrano said:
So, I have this goofy phone and I did manage to get something that appears to be root using KingRoot. The PC version didn't work, and neither did TowelRoot or OneClickRoot. Downloading the apk for KingRoot and running it gave me root access, but only until I rebooted the phone. I managed to install SuperSU which allowed me to confirm that I had root. Unfortunately I was not able to uninstall any pre-loaded software while rooted via KingRoot or KingUser. KingRoot acted like it had successfully uninstalled the pre-installed software, but all it uninstalled were the updates. I didn't get a list of software when I tried to uninstall software via KingUser.
So we can boot into Recovery, and can get temporary root. Any ideas on how to get farther with this crippled phone?
Click to expand...
Click to collapse
Did you actually gain any space when you uninstalled items with that temporary root? I am able to uninstall updates on default apps even without root. I had one time with KingoApp where it claimed to be rooted, but I lost it with reboot and haven't gotten it back. Very frustrating. Wish I had avoided the reboot.
nothing works
I too got temporary root with kingroot, got to ambitious with uninstalling system apps and got into a force close loop. A factory reset from the stock recovery got me back in business. I didn't think that a factory reset was supposed to recover apps deleted while in root access. Also kingroot didn't work the first time for me, had to try several times, that was with latest apk, 4.1 I think.
Has anyone contacted zte about a bootloader unlock code? I know most phones it is necessary to unlock the bootloader to gain permanent root access. Plus then maybe we could get a custom recovery. I tried contacting them with no luck.
Talked to zte today, won't give unlock code since it will void warranty. Told them I didn't care about warranty since phone is worthless as is, no luck.
It could work the method used in the ZTE Z970? http://forum.xda-developers.com/general/help/zte-zmax-rooted-kingroot-t3110178
I was able to get temp root with Kingroot but doesn't stick after reboot. Today I got root to stick by using Flashify to flash superuser zip (http://download.chainfire.eu/supersu). I then deleted Kingroot apps. I was able to uninstall some ATT apps but not google apps. I tried SD Card Fix but didn't work and still can't change/mount r/w in root explorer.
hey, i just registered here to inform you all that ive figured out a way to root the new rca viking pro, but i cant seem to get supersu to install its updated binaries... i went about it like this, i searched google for kingroot app, installed it, followed the instructions it came with, and for my own benefit, i ran it twice just to make sure it worked. and wala, root! but the downside is they have their own form of su called king user. and i hate it. i hope this info helps someone, as ive came to this site on so many occaisions and everytime something on here bailed me out of a jam, i figured it was bout time i gave to a site that contributed so much to me. i love xda, and i hope someone here can get some nice things going with this tablet. thanks for your time... May
info on the RCT6303W87DK
also, FOR YOUR OWN GOOD, DO NOT CHANGE THE GENERIC.kl file on this device!!! the keyboard that comes with it, and the volume and power buttons on the device will NO LONGER function!!! just got a replacement from wallyworld because of my epic failure.... YOU HAVE BEEN WARNED!!! :good:
I tried a few different methods last night to install supersu binaries effectively breaking root a few times all resulting in using king root to "reroot". The main issue I'm having is it immediately has an update to version 1.9.1 (tablet firmware).. To get around this prompt lock the tablet, turn screen back on but unlock it with camera (bottom right). After doing this you get home rows back. Now since root I'm getting failures to install the update and every time it comes on I'm promoted for the update multiple times. Any ideas?
reemobeens19 said:
I tried a few different methods last night to install supersu binaries effectively breaking root a few times all resulting in using king root to "reroot". The main issue I'm having is it immediately has an update to version 1.9.1 (tablet firmware).. To get around this prompt lock the tablet, turn screen back on but unlock it with camera (bottom right). After doing this you get home rows back. Now since root I'm getting failures to install the update and every time it comes on I'm promoted for the update multiple times. Any ideas?
Click to expand...
Click to collapse
you have to be unrooted to apply system updates... then re root. king root should have an unroot option in app, so un rooting isnt hard. or you can hook the tab to your pc and use kingo to unroot. it will unroot, but it wont root...
I can confirm that kingroot does in fact have an option to unroot. I can also confirm that it is able to reroot after the 1.9.1 update.
Mine updated to that the first time I turned it on and I lost the update file. Can anyone tell a difference before and after the update?
I'm going to do a full stock ROM dump tonight to share. Just in case me or anyone else screws theirs up. I want to install a custom recovery and don't want to take any chances with it. Locked mtk bootloaders are ugly. Especially on these newer chipsets which cannot be unlocked as easily as the old ones.
Btw, before I finally found kingroot I must have tried about thirty different ways to root this thing. I tried several on phone root apps and a bunch of ones which required a pc connection to work and I came up short.
I got partial root with iroot 1.7 something for PC. It installed kingroot and would say that it was granting root to apps but noting actually had root.
Finally I found the latest version of vroot. V1.8 something, it had the same root database number as the earlier iroot which I had, though. Then I installed the pdanet drivers and ran the vroot and it worked! Finally! I spent hours on the stupid thing.
I did try the kingroot (iroot) apk and it couldn't root it and suggested I try the PC version.
What I'm getting at is that possibly fw 1.9.1 is just a security patch that makes it harder to root. Because when I tried the apk it couldn't handle it and I had to use the PC version with pdanet drivers to get it to work. While the apk worked for you on v1.9.0 (mine updated the first time I powered it on).
So if you install the update you might want to watch out for that.
It may be possible to stop the forced ota with fotakill. Just Google the apk and place it in your /system/app folder, then delete it rename the update in your cache folder and restart.
That has always worked for me so far on all of my other Android devices.
Cheers,
-SS
Used titanium back up to freeze the updater. Went to Dev options, enabled show processor usage or something to that nature.. Watched for any thing popping up that said update. I don't remember the exact apk but a simple search with in titanium for the word update returns the only app containing it. This did indeed solve my problem about the constant update. Also another work around to bypass the update, tell it to "download and install" then immediately his stop/cancel download. This will be my last post for now on the device as I no longer own it.
Have a blessed day!
For those wanting wired controller support, tincore works wonderfully. Im using an official xbox360 control and it controls the ui and a majority of my games. Emulators as well. This is pretty much the only way to use a wired control on this tablet as far as i know. I've tried dozens of methods to no avail. Still trying to get su up and running as well. King root does function but id prefer something im used to. Anyone know of a custom recovery that'd work on this thing???
simstimstar said:
I can confirm that kingroot does in fact have an option to unroot. I can also confirm that it is able to reroot after the 1.9.1 update.
Mine updated to that the first time I turned it on and I lost the update file. Can anyone tell a difference before and after the update?
I'm going to do a full stock ROM dump tonight to share. Just in case me or anyone else screws theirs up. I want to install a custom recovery and don't want to take any chances with it. Locked mtk bootloaders are ugly. Especially on these newer chipsets which cannot be unlocked as easily as the old ones.
Btw, before I finally found kingroot I must have tried about thirty different ways to root this thing. I tried several on phone root apps and a bunch of ones which required a pc connection to work and I came up short.
I got partial root with iroot 1.7 something for PC. It installed kingroot and would say that it was granting root to apps but noting actually had root.
Finally I found the latest version of vroot. V1.8 something, it had the same root database number as the earlier iroot which I had, though. Then I installed the pdanet drivers and ran the vroot and it worked! Finally! I spent hours on the stupid thing.
I did try the kingroot (iroot) apk and it couldn't root it and suggested I try the PC version.
What I'm getting at is that possibly fw 1.9.1 is just a security patch that makes it harder to root. Because when I tried the apk it couldn't handle it and I had to use the PC version with pdanet drivers to get it to work. While the apk worked for you on v1.9.0 (mine updated the first time I powered it on).
So if you install the update you might want to watch out for that.
It may be possible to stop the forced ota with fotakill. Just Google the apk and place it in your /system/app folder, then delete it rename the update in your cache folder and restart.
That has always worked for me so far on all of my other Android devices.
Cheers,
-SS
Click to expand...
Click to collapse
When I first got the tablet, i let it update then got the kingroot apk, installed it and it rooted. The one i used is in chinese but it had instructions and i followed them to the t. It worked. And the back up of the rom would be greatly appreciated by ALOT of us trust me. Especially me...?
Overall, this is a pretty nice tablet to own. The space alone is worth the price of admission. The specs are decent as well. Quad core, mali gpu, one gb ram, the detachable keyboard, oh i could go on. Im a heavy gamer and this is perfect for me. I have all the power i need to run everything i use. And with a 32 gb sdcard and 32gb internal, thats plenty storage for pretty much anything. I recommend this device to anyone looking for performance on a budget. 10/10
Yes, I'ts very nice. I couldn't find anything else that would even come close to it in that price range. Even used ones....
I was able to edit some config files for mrkdroidtools and got it working properly with mt8127 for the most part. At least now it will create the proper scatter file (in the correct format) for mt8127. Even though it's working properly to create the scatter, you have to use Windows enabler to allow to click the greyed out scatter file button. Before if you did that it would create a scatter in the old format without correctly identifying partition types and even not setting the correct partition sizes in the scatter. Also the chip was identified incorrectly before and now it's not.
All of the mt8127 scatters I have seen use scatter v1.1.2 (not the old format) and now I got it to output that. With proper scatter you can manually pull each partition correctly in spft.
Mtkdroidtools will now partially work for backup. It will pull firmware.info, mounts.info, and phone.info. along with NVRAM and /system only. Can't pull the others because the partitionsions are locked. Even with insecure adb (root ADB) and selinux set to permissive.. You can get old style scatter from firmware.info and mtk studio, but better to let mtkdroidtools pull the correct one.
It will try to make the CWM recovery but fails out. Magic twrp will now create the correct recovery and push it to the phone (with files from spft backup) but the recovery won't work due to the locked loader.
At least I know my backup works now because I was able to reflash the original recovery with it (this is how I screwed up my first one, which ended up going back to Wal-Mart). That first one stopped booting, but it was still recognized by spft. I just had no backup to fix it with. If they rma it, I'm sure it can be reflashed with original firmware and resold.
I will be putting this all in a toolkit and uploading. This can benefit all devices with mt8127, not just us. I also have the latest spft and I even found the checksum.exe in another package somewhere. This can be used to generate the firmware checksums for spft so you don't have to flash with checksum turned off (safer).
Haven't tried to reroot with mtkdroidtools because I think the supersu is pretty old. Don't think it will work properly in lollipop.
I wish there was a way to unlock the bootloader. I poked around in my backup of it and it clearly references files from NVRAM. Files with checksums and lists. I would think that there would be some other tablet sold under a different brand which is unlocked out there
Somewhere which is the same as ours.
Gotta run. I'll try to upload the toolkit after work if there is time. I need to clean up my backup to remove personal files from data before uploading. If it's an emergency and someone needs backup without /data I can provide now. Don't know if it will work though because kingroot resides on data. Perhaps it will work just can't authorize root.
Cheers!
-SimStim
Again, with the new one I got I couldn't root with the latest iRoot from the PC until pdanet was installed on the phone. Then it worked fine.
Without pdanet it will get temp root, then restart and when kingroot automatic root check runs it says no root and will try again and again in a loop.
With pdanet, temp root, reboot, and it's permanent root.
Just in case anyone is trying to root via this method.
Cheers!
-SimStim
simstimstar said:
Again, with the new one I got I couldn't root with the latest iRoot from the PC until pdanet was installed on the phone. Then it worked fine.
Without pdanet it will get temp root, then restart and when kingroot automatic root check runs it says no root and will try again and again in a loop.
With pdanet, temp root, reboot, and it's permanent root.
Just in case anyone is trying to root via this method.
Cheers!
-SimStim
Click to expand...
Click to collapse
You may be right... The first one i had i let kingoroot on the pc download and install some drivers. And i used pdanet awhile ago for a previous rca tab and never deleted the drivers, so maybe thats why it worked flawlessly the second time. If you have a custom recovery installed, which did you use and how'd you install it?
I tried the "magic" auto-build of CWM and TWRP, but neither one works because of the locked boot loader.
Which also makes me wonder if my backup would work on someone else's tab... The 7" RCA tab on here with the prerooted ROM works because they found another tablet which was the same and had an unlocked bootloader. At least that's what understood from it. I could be wrong though. I didn't read all 35 pages (or however many).
I'll try and double check that
Cheers,
-SimStim
simstimstar said:
I tried the "magic" auto-build of CWM and TWRP, but neither one works because of the locked boot loader.
Which also makes me wonder if my backup would work on someone else's tab... The 7" RCA tab on here with the prerooted ROM works because they found another tablet which was the same and had an unlocked bootloader. At least that's what understood from it. I could be wrong though. I didn't read all 35 pages (or however many).
I'll try and double check that
Cheers,
-SimStim
Click to expand...
Click to collapse
any progress yet? ive been searching hi and lo for custom recoveries that work to no avail. i want to try and unlock the bootloader but im afraid i may screw somthing up if i cant restore a backup. i guess its a chance im willing to take if it furthers development on this tablet. i honestly want to rip lollipop off of here and run jb 4.2.2. personally i think thats the best version of android yet. at least with funcionality. and the fact you can just plug and play on that version is a plus for me!!! hope you come across something....
may
I'm planning to return mine. I started looking around at tablets in this price range and have decided to buy a Pipo M9S instead. The price is pretty close and it absolutely spanks this device in hardware specs.
I'm somewhat biased, because I have an Android tv device based on the RK3288 and I know how fast it is. The hardware video decoder is the best I've seen yet. Plus it is so nice not to have to deal with the locked bootloader.
I wanted an RK3288 based tablet before, but was put off by the $200-300 price range which I had seen on the Pipo P9 and the P1. Then just recently I found that I could get a p7 for ~150 and an M9S for ~$175, so I've decided that I would much rather go that way(M9S).
I will hang on to my backup of this device in case it will come in handy for anyone else in the future.
Cheers,
-SimStim
simstimstar said:
Yes, I'ts very nice. I couldn't find anything else that would even come close to it in that price range. Even used ones....
I was able to edit some config files for mrkdroidtools and got it working properly with mt8127 for the most part. At least now it will create the proper scatter file (in the correct format) for mt8127. Even though it's working properly to create the scatter, you have to use Windows enabler to allow to click the greyed out scatter file button. Before if you did that it would create a scatter in the old format without correctly identifying partition types and even not setting the correct partition sizes in the scatter. Also the chip was identified incorrectly before and now it's not.
All of the mt8127 scatters I have seen use scatter v1.1.2 (not the old format) and now I got it to output that. With proper scatter you can manually pull each partition correctly in spft.
Mtkdroidtools will now partially work for backup. It will pull firmware.info, mounts.info, and phone.info. along with NVRAM and /system only. Can't pull the others because the partitionsions are locked. Even with insecure adb (root ADB) and selinux set to permissive.. You can get old style scatter from firmware.info and mtk studio, but better to let mtkdroidtools pull the correct one.
It will try to make the CWM recovery but fails out. Magic twrp will now create the correct recovery and push it to the phone (with files from spft backup) but the recovery won't work due to the locked loader.
At least I know my backup works now because I was able to reflash the original recovery with it (this is how I screwed up my first one, which ended up going back to Wal-Mart). That first one stopped booting, but it was still recognized by spft. I just had no backup to fix it with. If they rma it, I'm sure it can be reflashed with original firmware and resold.
I will be putting this all in a toolkit and uploading. This can benefit all devices with mt8127, not just us. I also have the latest spft and I even found the checksum.exe in another package somewhere. This can be used to generate the firmware checksums for spft so you don't have to flash with checksum turned off (safer).
Haven't tried to reroot with mtkdroidtools because I think the supersu is pretty old. Don't think it will work properly in lollipop.
I wish there was a way to unlock the bootloader. I poked around in my backup of it and it clearly references files from NVRAM. Files with checksums and lists. I would think that there would be some other tablet sold under a different brand which is unlocked out there
Somewhere which is the same as ours.
Gotta run. I'll try to upload the toolkit after work if there is time. I need to clean up my backup to remove personal files from data before uploading. If it's an emergency and someone needs backup without /data I can provide now. Don't know if it will work though because kingroot resides on data. Perhaps it will work just can't authorize root.
Cheers!
-SimStim
Click to expand...
Click to collapse
if you still have it, can you upload that stock image and the tools you have? or send them to me via email? ive done something terrible and i wish to go back to stock until i figure something else out. if you can do it via email, heres my [email protected]- thanks
How can I contribute
While I haven't had any issues with my DK on v1.9.1, I'm always interested in the latest and greatest Android ROM. I've got my fingers crossed for you on making restore images so you can get another ROM built on this. So, if I can contribute, even if it is paypal'ing $20 to pay toward a second tablet for you to work on, let me know.
Regards,
David
Is anyone working on unlocking the bootloader of this device? Fastboot allows me to see the "press volume up key to unlock" screen using fastboot oem unlock, however it does not respond to volume keys. Being that I got that far could it possibly succeed if it didn't have to prompt for permission?
It's going to be really tough to try and crack it. The RCA 7" tablet here on xda that got an unlocked loader because they found out that there was a Cube branded tablet which was identical, except it had an unlocked boot loader.
RCA is not the actual manufacturer (I forget who is, but cpu-z will tell you I think). Perhaps if someone were to contact the manufacturer and find out which other companies they OEM that tablet hardware to. Then check them out for unlocked bootloaders.
I would be willing to bet that they may not reveal that info so easily, so try looking around for similar hardware.
I found on a benchmarking site that the RCA 10" which doesn't have the keyboard is also the same spec and model number as a model sold by gigabyte. I don't know the status of the bootloader, though. If you flash it you risk bricking your tablet.
MTK is pretty much the opposite of rockchip, who has made their devices nearly brick proof. MTK devices with locked bootloaders are very likely to brick because of the security measures built in, odd and often encrypted filesystems with specific hashes for certain partitions, write protection on the main system partions. It's really a massive pain in the neck. Those are the reasons why I decided to get rid of mine.
It's rooted and someone who doesn't want to build custom ROMs will be perfectly happy with it. Me, I want full access! Really the tablet is pretty nice. Just not if you want custom recovery, kennel, unofficial ROMs, etc.
I'm still looking. It's probably out there somewhere. I'll be sure to post if I see anything.
Cheers,
-SS
How do you know the bootloader is locked? I see walmart has cut the price on them, I haven't seen any rca tablets with bootloader locked.
I have read the other threads numerous times, and for the life of me can't get this phone rooted.
It is the D651 version and it's running Lollipop from an OTA update.
I tried rooting before allowing the update, but couldn't get that to work, so I decided to go ahead and update to lollipop thinking that would solve my problem
NOT!
I've tried KingoApp---FAILED
iRoot----FAILED, both phone version and computer version
Towelroot----FAILED
Does ANYONE have any suggestions?
I downloaded MTK Engineering, and went into MTK Settings/Log and Debugging/User2Root/Root
but that didn't seem to do anything either.....not sure why I even did that other than reading in one of the other threads to go into engineering mode and allow root.....I'm assuming that's what this means?
I am really getting frustrated by this...please, if anyone can offer any tips/tricks/or insight on what I am doing wrong, it would be greatly appreciated.....
Try Kingroot
First excuse my English but I'm using google , you need to download Aptoide ( which is an alternative app store ) from Aptoide you write browser and then install it , and looking for the KIGROOT installed application to appear clicking on the ' look at other stores " there will KINGROOT appear with an icon of lightning , is in Chinese , click on the icon and wait until the middle of root, then check with root checker , you then recommend to be root to delete the store of Aptoide.
Install a kind of SU called Kinguser , I install CWM or Philz , when I have you posting like . good Luck
jhashiv said:
First excuse my English but I'm using google , you need to download Aptoide ( which is an alternative app store ) from Aptoide you write browser and then install it , and looking for the KIGROOT installed application to appear clicking on the ' look at other stores " there will KINGROOT appear with an icon of lightning , is in Chinese , click on the icon and wait until the middle of root, then check with root checker , you then recommend to be root to delete the store of Aptoide.
Install a kind of SU called Kinguser , I install CWM or Philz , when I have you posting like . good Luck
Click to expand...
Click to collapse
Kingroot doesn't seem to work on this device. I'm not OP.
blu community
totallybeachin said:
I have read the other threads numerous times, and for the life of me can't get this phone rooted.
It is the D651 version and it's running Lollipop from an OTA update.
I tried rooting before allowing the update, but couldn't get that to work, so I decided to go ahead and update to lollipop thinking that would solve my problem
NOT!
I've tried KingoApp---FAILED
iRoot----FAILED, both phone version and computer version
Towelroot----FAILED
Does ANYONE have any suggestions?
I downloaded MTK Engineering, and went into MTK Settings/Log and Debugging/User2Root/Root
but that didn't seem to do anything either.....not sure why I even did that other than reading in one of the other threads to go into engineering mode and allow root.....I'm assuming that's what this means?
I am really getting frustrated by this...please, if anyone can offer any tips/tricks/or insight on what I am doing wrong, it would be greatly appreciated.....
Click to expand...
Click to collapse
Hello Buddy i just got this phone and the 1st thing i did was update it because it was on kk know it is lolypop and i used kingo root method and workede like a charm. it also gave me kinguser and purify..
Yeah, I managed to get it to work also.
Then went so far as removing Kinguser and replaced it with SuperUser.
Caused a bunch of problems in doing so, but managed to get everything in working order......to an extent.
Now, no matter how many times I try, I can not unroot or return to factory settings.
Even wiping the phone and flashing stock/recovery doesn't seem to work.
I've been trying to 'wipe' the phone and return it to out of the box status several times but.....no joy.
I'm going on a huntch
Means this is mtek phone
Thinking back to moto g the xt we had to get a unlock code from Motorola and use the n send this extra long key by email to moto for exchange of an unlock code.
Anyone think maybe same rule might apply?? Just guessing cause I want to see this thing unlocked an going cause this audio is really weak on my end and the touch screen is the pits when typing its like 50 x then it types the letter
I noticed after I used king root everything I changed started to go back to the way it was n or disappeared.
Kingroot seemed to work
Seems to work only for awhile until you start trying to make heavy system changesit starts to bugger up. I got that same page its in my opinion a temporary exploit method.
Title pretty much says it all. I've tried countless one click root programs with no progress whatsoever. I've spent hours searching and nothing comes up for this phone. Does anyone know a way to root this thing??
Garrett162 said:
Title pretty much says it all. I've tried countless one click root programs with no progress whatsoever. I've spent hours searching and nothing comes up for this phone. Does anyone know a way to root this thing??
Click to expand...
Click to collapse
same here, a guy who works for kyocera told me that this model cant be put into recovery mode. Any help appreciated
I'm joining the request. As stated above, I've combed the web for anything on it with no success. Is this because of the fairly new release? Or possibly the trouble they're in because of Microsoft?
Either way I feel there should be an exploit out for it by now...
I too am looking fir an exploit for this device, and have scoured Google, Bing, and Yahoo, only to find nothing.
pharos23 said:
same here, a guy who works for kyocera told me that this model cant be put into recovery mode. Any help appreciated
Click to expand...
Click to collapse
This model (Hydro Wave C6740N) CAN be put into Recovery Mode, using ADB.
Since Windows (edit: XP) USB drivers for the C6740N Wave are not released by Kyocera (yet), you (edit: can) use a Linux or OS X machine to connect using USB, to use ADB on the C6740N. (Since USB connection to C6740N "just works" on those platforms.)
I have used ADB on a Macbook running OS X to reboot my Hydro Wave into Recovery Mode, and performed cache wipe successfully. Also performed backups using ADB.
Kyocera advised (via email) that the Wave can be put into Recovery using Volume Down + Power key combo. Not true, the key combo does not work.
Kyocera also advised (via chat) that the Windows USB driver for any Hydro family device will work for the Wave. Also not true (I tried it). (Edit: I tried the drivers with Windows XP. It looks like the Kyocera Windows USB drivers may simply be USB modem drivers only, on any case.)
OS X or Linux using ADB is the ticket, no USB driver necessary. (Edit: But see other posts about using Windows 10 too.)
I'm also keenly interested in rooting the C6740N, but an absolute noob. The C6740N has a lot going for it, but a few shortcomings that root would enable resolving. If anyone knows of a way to root it, we would be most grateful to hear about it.
Tried about everything else too and nothing works
There's a working driver in Windows 10, but KingoRoot still fails. I almost tried King Root, but it's all in Chinese. I was going to try Framaroot but gave up when the download link resulted in an endless survey loop to win a free $100 Visa card (yeah....... GO F**K YOURSELF). I really want to root this thing. MetroPCS has this thing loaded full of bloatware and the Google BS I never use (google+ MUST DIE) is just eating storage space and what tiny bit of RAM is left. It's a nice phone but the inability to overclock the CPU, delete bloatware, and turn my 4GB SD Card into RAM really leaves alot to be desired.
The phone can be put into recovery using adb on windows.but that's as far as that goes.Cant find any way to root.Hope we get one soon.
So I think we should make a list of what root methods that did not work. That way we wont get hassled of what does not work
Kingo Root: FAIL
Towelroot: FAIL
Framaroot: UNKNOWN
King Root: UNKNOWN (Can't read Chinese)
Could you use a kill file that would reset all data including disabling some things
Root genius fails
King root fails
Kingoroot fails
Iroot fails
Framaroot fails
Towelroot fails
I'm thinking you gotta unlock the boot loader , but I can't put into fast boot mode or boot onto the boot loader for any adb fastboot commands to work. I can get to recovery in adb , and in the recovery menu I select boot to boot loader but it boots normally. I really want to root this thing!!
I just noticed that they're are any way to root the latest lolipop unless your on 5.0.2 ( BTW I checked kingroot and checked the request of our device and its almost to 1000
Subbing 'cuz I just got it and want it rooted. How do I request it from Kingroot?
pissinguoff247 said:
Subbing 'cuz I just got it and want it rooted. How do I request it from Kingroot?
Click to expand...
Click to collapse
Just download their app open it try to root after its done it will say submit press it . Or you can go to their website and try to send them an email?
I rooted my phone it does work
Sent from my C6530N using XDA Free mobile app
jonmyob said:
I rooted my phone it does work
Sent from my C6530N using XDA Free mobile app
Click to expand...
Click to collapse
What how?
xdamember143 said:
What how?
Click to expand...
Click to collapse
If he rooted the phone he sent the reply from, he's unfortunately in the wrong thread. The C6530N is the Hydro Life. We're trying to root the C6740N which is the Hydro Wave. Thanks for getting our hopes up.
On the other hand, if he's using the Hydro Life to post in the forum but has successfully rooted the Hydro Wave, we would all love to know just how you did it. My Hydro Wave is running worse than an Alcatel Evolve on the stock setup. We need root badly.
Speaking of root exploits such as Framaroot, see
http://www.theregister.co.uk/2015/0...droid_users_creates_hijackable_global_botnet/
Which links to the original exposé:
https://www.fireeye.com/blog/threat-research/2015/09/guaranteed_clicksm.html
...which notes that this Android botnet malware uses Framaroot and other root exploits. I wonder if some of these Chinese root exploit tools themselves (Framaroot, Kingoroot, etc.) carry a hidden malware payload.
....
Hi I've tried everything also but I also tried this program for tablets called zuse toolkit & it seems to get something through cause it reboots & optimizes or upgrade apps I'm not too sure which one but if someone out there knows how to modifie the way this zuse toolkit roots then maybe we have a chance of rooting this new phone oh & after it optimizes or upgrades the apps I check for root permissions and it still says it does not have root permissions so yea...
How do you root a z828 zte avid plus phone metro pcs?????
It's different than the Avid 4G. You can still get into the FTM, but I'm guessing either the script or the security is different. Mine is on Android 5.1.1 MetroPCS and I've been searching everywhere to no avail. Some help in this matter would be greatly appreciated. :cyclops:
Also desperately looking for a way to root the device. I bought it as a cheap replacement when my last phone was broken, and so far I've enjoyed the phone. This is one major pitfall, though. Ive tried plenty of rooting apps and methods, and I'm willing to test and play with more. Any help is greatly appreciated and I'm offering any assistance I can. Let's find a way to crack this thing.
hi you guys i bought the avid plus from somebody yesterday for $50 and it turned out that the phone is messed up bad it wont boot and when it does it just turns off and its hard to get to go back on, is there anyway you guys can send me a copy of a backup of your phone system files, ive been looking everywhere online for countless hours for any kind of stock file and theres none at all so please i beg you send me a link or email me a few of the main required files please my email is [email protected] thank you so much for helping
ZTE z828
wood909 said:
hi you guys i bought the avid plus from somebody yesterday for $50 and it turned out that the phone is messed up bad it wont boot and when it does it just turns off and its hard to get to go back on, is there anyway you guys can send me a copy of a backup of your phone system files, ive been looking everywhere online for countless hours for any kind of stock file and theres none at all so please i beg you send me a link or email me a few of the main required files please my email is [email protected] thank you so much for helping
Click to expand...
Click to collapse
ZTE Open allows you to reinstall and recover all your system files, but you need a PC and the software/directions. Google "ZTE open" z828 and you should be able to find the info you need. :cyclops:
Has anyone found a root that works on zte avid plus z828 yet?
usershack said:
Has anyone found a root that works on zte avid plus z828 yet?
Click to expand...
Click to collapse
not yet......kingroot has a request form when you download it on your phone. As of now, there is about 5000 requests and was last seen at queue list 342 and it increase every day. my guesstimate is maybe by the end of July there will be a root program
End of July for sneaky Chinese info-thief rooting... Should be at about Android 9.2 by then. Never again owning a ZTE unless is a time machine and/ or comes with a Gremlin.
e30eternal said:
End of July for sneaky Chinese info-thief rooting... Should be at about Android 9.2 by then. Never again owning a ZTE unless is a time machine and/ or comes with a Gremlin.
Click to expand...
Click to collapse
I don't know how successful you can be but if you go to kingoroot.com and try you may have a chance.
Here is what I did, first I downloaded the program for the pc, then attempted to root the device. When it failed, I saved the log and emailed them. After about a week I tried again. By this time I was fooling around with the cable, restarting phone, unplugging the cable and constantly restarted the kingoroot app, then finally after an hour of doing this the root worked!!!
Give it a shot, it may be worth it!!!
I have the same problem too, the reason why many rooting apps failed because the Z828 is not yet rootable. But don't worry, it will be in the future.. just don't know when.
Root
Root successful with kingoroot.
Phone messing up and root gone upon reboot.
darkfirekid said:
Root successful with kingoroot.
Phone messing up and root gone upon reboot.
Click to expand...
Click to collapse
Can't use it for anything.
I got boot up and running!
Step 1: DOWNLOAD
ADB Drivers - http://adbdriver.com/
ADB Shell (guide and download) - http://forum.xda-developers.com/showthread.php?p=48915118
kingo root - https://www.kingoapp.com/android-root/download.htm
Step 2: Command Prompt with ADB
run the CMD with admistrator privileges and use the following commands -
adb devices
[hit enter]
adb reboot disemmcwp
[Your device will now reboot with some extra write permissions]
install and run KINGO ROOT! (Yes, it's kingO root, not King) on your pc.
SHAABAAMMMM!!!!
Now we need a custom recovery for it!
PS: o/! Dont try link2sd , because it #$&*#&(*@^*$ your apks, and you can't find it in the 2nd partition.
it says that the device is offline what do i do?
It does work as stated above. Nice job, I've been trying to do this for a while now. I didnt know there was a command to make the phone reboot with more permissions. Very nice!
Seems to not work for me. I get it to connect and everything, but KingoRoot fails to keep going or it finishes at 100% and tells me that it failed to install Root.
Nevermind, I had to reboot my PC.
I'm not sure this is a true root. And how do I remove kingosu and replace with SuperSU? Super sume did not work as kingosu refused to give it a permission.
Yeah its a false root. Had to wipe and factory reset.
okay. upon third try it rooted! and even root explore r/w worked!
however i deleted the metro apps and tried to install supersu because i hear nasty comms going on between kingouser and chinra.
well i'm bricked now. lol.
wont boot past powered by android splash. possibly because i deleted the MYMETRO folder in system/app.
zte and metro dont provide the update.zip so i cant recover.
any ideas? and dont tell me go to metro because they wont help.
Same problem now bricked can only open recovery
however i deleted the metro apps and tried to install supersu because i hear nasty comms going on between kingouser and chinra.
well i'm bricked now. lol.
wont boot past powered by android splash. possibly because i deleted the MYMETRO folder in system/app.
zte and metro dont provide the update.zip so i cant recover.
any ideas? and dont tell me go to metro because they wont help.