Database Info

Rom Samsung tab 4 10.1" T530 WIFI

Hi everyone I am trying of install CM12 Unoffical.
I am downloading from this file
cm-12.1-20150605-UNOFFICIAL-matissewifi.zip
I am rooted mi TAB and installed TWRP recovery. My question is
To install the rom I dont need anymore? some gapps o something more.?
THK for your help....
My stock rom is from Argentina Android 4.4.2.

serafyn said:
Hi everyone I am trying of install CM12 Unoffical.
I am downloading from this file
cm-12.1-20150605-UNOFFICIAL-matissewifi.zip
I am rooted mi TAB and installed TWRP recovery. My question is
To install the rom I dont need anymore? some gapps o something more.?
THK for your help....
My stock rom is from Argentina Android 4.4.2.
Click to expand...
Click to collapse
You've got a few things wrong. So first, in order to be able to install any Cyanogenmod 12 roms (or any other lollipop roms) you have to update to stock lollipop first. Here is the Argentina lollipop 5.0.2 Odin file for your tablet: Wi-Fi SM-T530 XXU1BOH5 ARO Region (Argentina)
Second, the version of cyanogenmod you have is out of date and no longer developed or supported. I would strongly urge you to choose this version of CM12 instead: http://forum.xda-developers.com/tab-4/development/rom-blisspop-3-1-t3084757
Finally as far as Gapps (yes you need gapps), I would recommend TK Gapps, it's regularly updated and you have control over just how many google apps you want installed (I use the nano version, but any version should work fine).

thisisapoorusernamechoice said:
You've got a few things wrong. So first, in order to be able to install any Cyanogenmod 12 roms (or any other lollipop roms) you have to update to stock lollipop first. Here is the Argentina lollipop 5.0.2 Odin file for your tablet: Wi-Fi SM-T530 XXU1BOH5 ARO Region (Argentina)
Second, the version of cyanogenmod you have is out of date and no longer developed or supported. I would strongly urge you to choose this version of CM12 instead: http://forum.xda-developers.com/tab-4/development/rom-blisspop-3-1-t3084757
Finally as far as Gapps (yes you need gapps), I would recommend TK Gapps, it's regularly updated and you have control over just how many google apps you want installed (I use the nano version, but any version should work fine).
Click to expand...
Click to collapse
Why I can not use Kitkat android to use CM12? What is the problems? I think that lolipop 5.0.2 use a lot batery, if I install lolipop stock and after that the rom the problem will be same?

serafyn said:
Why I can not use Kitkat android to use CM12? What is the problems? I think that lolipop 5.0.2 use a lot batery, if I install lolipop stock and after that the rom the problem will be same?
Click to expand...
Click to collapse
Bootloader. If you don't know what that is, don't even bother asking why
You won't be using stock. You just need to install the stock 5.0.2 file before you'll be able to successfully flash any lollipop ROM. Trust me, I've been there before
Don't worry about the battery. The stock rom doesn't have any affect on your battery after you install the custom rom

serafyn said:
Hi everyone I am trying of install CM12 Unoffical.
I am downloading from this file
cm-12.1-20150605-UNOFFICIAL-matissewifi.zip
I am rooted mi TAB and installed TWRP recovery. My question is
To install the rom I dont need anymore? some gapps o something more.?
THK for your help....
My stock rom is from Argentina Android 4.4.2.
Click to expand...
Click to collapse
You can to install successfully only CM12 not CM12.1 on your KK bootloader .
If you want you can to try this 5.0 CM build
http://android.comtek-wiebe.de/Cyan...12-20150324-UNOFFICIAL-matissewifi.zip.md5sum
and http://android.comtek-wiebe.de/PAC-man/pac_matissewifi_LP.Beta-1.Unofficial_20150323-211047.zip
It is the best of CM12 in mine .
You need select 5.0 Gapps .

repey6 said:
You can to install successfully only CM12 not CM12.1 on your KK bootloader
Click to expand...
Click to collapse
Yeah, except for the part where serafyn is going to want to install a rom that was built later than March or April.
Trust me serafyn. repey6 is giving you the quick, temporary stop-gap fix. I'm giving you the correct, permanent fix

thisisapoorusernamechoice said:
Yeah, except for the part where serafyn is going to want to install a rom that was built later than March or April.
Trust me serafyn. repey6 is giving you the quick, temporary stop-gap fix. I'm giving you the correct, permanent fix
Click to expand...
Click to collapse
There are no big difference between CM12 and CM12.1 . CM is CM .

thisisapoorusernamechoice said:
Yeah, except for the part where serafyn is going to want to install a rom that was built later than March or April.
Trust me serafyn. repey6 is giving you the quick, temporary stop-gap fix. I'm giving you the correct, permanent fix
Click to expand...
Click to collapse
ok. So cam I just update by OTA to lollipop and after that I need ROOT again and install TWRP?
Because I had TWPR inatall already.
Sorry for my english. xD

serafyn said:
ok. So cam I just update by OTA to lollipop and after that I need ROOT again and install TWRP?
Because I had TWPR inatall already.
Sorry for my english. xD
Click to expand...
Click to collapse
Yes, exactly, but it's the same easy process. It's worth doing now so you can install any lollipop ROM you want and not have to worry about the bootloader issue
Edit: I just remembered, the ota might not be able to install correctly since you're already rooted. If that's the case, use Odin and that firmware file I linked to earlier in order to update to stock lollipop

thisisapoorusernamechoice said:
Yes, exactly, but it's the same easy process. It's worth doing now so you can install any lollipop ROM you want and not have to worry about the bootloader issue
Edit: I just remembered, the ota might not be able to install correctly since you're already rooted. If that's the case, use Odin and that firmware file I linked to earlier in order to update to stock lollipop
Click to expand...
Click to collapse
Ok. Thk. I am downloading the stock rom that said me. I will use ODIN to update.
After that cam you help to install recovery and root? I was reading about it but , I cant see nothing clear.

serafyn said:
Ok. Thk. I am downloading the stock rom that said me. I will use ODIN to update.
After that cam you help to install recovery and root? I was reading about it but , I cant see nothing clear.
Click to expand...
Click to collapse
I wrote a set of instructions for that here: http://forum.xda-developers.com/showpost.php?p=61421937&postcount=4
It's pretty straightforward, you just have to use Odin to install the recovery, then boot into the recovery and use that to install the supersu zip. The post I just linked to goes into more detail, obviously

thisisapoorusernamechoice said:
I wrote a set of instructions for that here: http://forum.xda-developers.com/showpost.php?p=61421937&postcount=4
It's pretty straightforward, you just have to use Odin to install the recovery, then boot into the recovery and use that to install the supersu zip. The post I just linked to goes into more detail, obviously
Click to expand...
Click to collapse
Hi again, I was reading the post that you say me and I have two questions for now. 1. can I use this file to install the TWRP openrecovery-twrp-2.8.6.0-matisse_wifi_3g_lte.tar .
2. Can I install this SU superSU zip?
two file there are in the post. THK a Lot for you help guys.

serafyn said:
Hi again, I was reading the post that you say me and I have two questions for now. 1. can I use this file to install the TWRP openrecovery-twrp-2.8.6.0-matisse_wifi_3g_lte.tar .
2. Can I install this SU superSU zip?
two file there are in the post. THK a Lot for you help guys.
Click to expand...
Click to collapse
Yes those are the files you need

thisisapoorusernamechoice said:
Yes those are the files you need
Click to expand...
Click to collapse
Ok. I did it. I installed the TWPR an SuperSu.
Now I going for the Rom

serafyn said:
Ok. I did it. I installed the TWPR an SuperSu.
Now I going for the Rom
Click to expand...
Click to collapse
This File is the right to the rom?
BlissPop-v4.0.3-matisse-UNOFFICIAL-20151008-1838.zip
and the gapp can I use Nano pack or wherever I want?
THK

serafyn said:
This File is the right to the rom?
BlissPop-v4.0.3-matisse-UNOFFICIAL-20151008-1838.zip
and the gapp can I use Nano pack or wherever I want?
THK
Click to expand...
Click to collapse
It is done, I installed the ROM and NanoPack gapps. But I have a problens whith the camera. The app open but the screen stay black. Some advice for me¿?

What did TWRP do to my tablet?

I installed TWRP. It was supposed to be TWRP 2.8.6.0, but it is 2.8.5.0. Today, I just backed up my tablet with it. After using TWRP, my tablet boots up 6 times faster and the UI functions twice as fast as it did before. Overall, my tablet got better after running TWRP. So, what did it do? Also, I want to flash Lollipop. Can I do that with this version?

I don't know what twrp did to your tablet. If you want to flash a lollipop or a marshmallow rom however you should use this version of twrp : http://forum.xda-developers.com/gal...overy-team-win-recovery-project-twrp-t3464050
And use one of theses rom :
lollipop : http://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/rom-cyanogenmod-12-cm12-t2997934
Marshmallow (recommended) : http://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/rom-cyanogenmod-13-cm13-0-t3303798

Ka-B00M said:
I installed TWRP. It was supposed to be TWRP 2.8.6.0, but it is 2.8.5.0. Today, I just backed up my tablet with it. After using TWRP, my tablet boots up 6 times faster and the UI functions twice as fast as it did before. Overall, my tablet got better after running TWRP. So, what did it do? Also, I want to flash Lollipop. Can I do that with this version?
Click to expand...
Click to collapse
twrp manage all general functions before the android system completely started. you can compare twrp with the bios system on your pc.
if you want install the latest roms, you should upgrade your twrp to the latest unofficial common version (3.0.2-6). you can find it here: http://andi34.github.io/recoveries_tab2.html

smart-t78 said:
twrp manage all general functions before the android system completely started. you can compare twrp with the bios system on your pc.
if you want install the latest roms, you should upgrade your twrp to the latest unofficial common version (3.0.2-6). you can find it here: http://andi34.github.io/recoveries_tab2.html
Click to expand...
Click to collapse
Can I flash the linked recovery using the recovery I already have? If not, how can i do it? I do not have a PC, BTW.

Ka-B00M said:
Can I flash the linked recovery using the recovery I already have? If not, how can i do it? I do not have a PC, BTW.
Click to expand...
Click to collapse
yes, you can install the new version with your current twrp.

smart-t78 said:
yes, you can install the new version with your current twrp.
Click to expand...
Click to collapse
Awesome.
It's official, my device will be upgraded. May the force be with us all!

Can we update CM Firmware without reinstalling OS

Hello,
Can we update CM Firmware without reinstalling OS?
I have recently install Nitrogen OS with the given firmware. But I have noticed there is a new firmware released with some bug fixes
Can I install the latest firmware without reinstalling the OS??

Jseven123 said:
Hello,
Can we update CM Firmware without reinstalling OS?
I have recently install Nitrogen OS with the given firmware. But I have noticed there is a new firmware released with some bug fixes
Can I install the latest firmware without reinstalling the OS??
Click to expand...
Click to collapse
If you want to switch to a completely different ROM, you will have to do the wipes in recovery then flash the new ROM. If you want to flash an update of the same ROM you have then you don't need the wipes, you can just flash the update without wiping, this is called "dirty flashing". Dirty flash usually only works when flashing an update of the same ROM that you have.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Hello ,
I am talking about the cm14.1 latest firmware and not about the custom room updates. Is it possible to install without any issues
Thanks in advance

Jseven123 said:
Hello ,
I am talking about the cm14.1 latest firmware and not about the custom room updates. Is it possible to install without any issues
Thanks in advance
Click to expand...
Click to collapse
What do you mean the latest CM14.1 update?
NitrogenOS and CM 14.1 ARE BOTH custom ROMs, they are NOT firmwares. Some devices were manufactured and sold with CyanogenMod as the stock firmware but CM is still predominately a custom android operating system.
And, as I said, if the update is an update to the exact same ROM as what is already installed, then all you have to do is flash it without doing any kind of wipes(this can even be done when updating stock via OTA, it's actually recommended to not do the wipes when updating stock via OTA). For example, if you have CM13 and want to update to CM14, or if you have CM14 and want to update to CM14.1 or if you have CM14.1 but want to flash a newer CM14.1 update, understand yet?
BUT!!!!
If you have some other ROM(something other than a version CM) currently installed but want to update to CM instead of what you have then you would have to factory reset, wipe cache and dalvik cache before flashing.
Let's make this simple since you can't seem to make sense of what I'm telling you. Tell me what you currently have installed and what you want to update to.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Hello,
I am currently using Nitrogen OS for Redmi note 3. I have flashed the firmware and installed the OS according to the procedures. I run nougat(7.1.2) on my Mob
Check this link : https://forum.xda-developers.com/redmi-note-3/how-to/cm14-14-1-aosp-n-firmware-kenzo-kate-t3507789

Jseven123 said:
Hello,
I am currently using Nitrogen OS for Redmi note 3. I have flashed the firmware and installed the OS according to the procedures. I run nougat(7.1.2) on my Mob
Check this link : https://forum.xda-developers.com/redmi-note-3/how-to/cm14-14-1-aosp-n-firmware-kenzo-kate-t3507789
Click to expand...
Click to collapse
You have nitrogen OS installed on your android and if you want to install update of nitrogen OS then no need of wiping.
If you want to change to different rom ( nitrogenOS to CM) then you need to first wiping/factory resetting or clearing dalvik and cache.
So, you are changing your rom then wipe/factory reset first and then flash CM. That what @Droidriven trying to say you.

Again you are confused. ROMs like Nitrogen runs on CM firmware ( or you can call it architecture). It's not the OS again, It regarding firmware. please someone help me on this I dont want my phone to get bootlooped or any other sort of issue. FYI : I don't want CM ROM/OS. I want Nitrogen itself but want to upgrade to the latest firmware. Please check the link i had provide before replying

Jseven123 said:
Again you are confused. ROMs like Nitrogen runs on CM firmware ( or you can call it architecture). It's not the OS again, It regarding firmware. please someone help me on this I dont want my phone to get bootlooped or any other sort of issue. FYI : I don't want CM ROM/OS. I want Nitrogen itself but want to upgrade to the latest firmware. Please check the link i had provide before replying
Click to expand...
Click to collapse
This is making sense now. You see, you are the one confused. You aren't asking the right question because you don't understand the difference.
You aren't looking for the "CM firmware", this does not even exist. This implies that the firmware was created by CM. It wasn't made by CM, it does not contain CM in it so it can't be called "CM FIRMWARE", it's a STOCK FIRMWARE that is COMPATIBLE with USING CM and other custom ROMs.
What you are looking for is the "stock firmware" that needs to be on your device BEFORE using CM13/14/14.1/AOSP Nougat ROMs.
The thread that you linked basically explains that if you want to use any kind of custom 7.0/7.1/7.1.1 Nougat ROMS then you need to flash this updated STOCK FIRMWARE in order for the device to be able to use those custom ROMs. It is not "CM FIRMWARE"
You're looking for the STOCK FIRMWARE that is compatible with CM and other nougat ROMs.
The thread that you linked explains what you need to know and how to do it, it says that you flash the updated firmware via TWRP and factory reset, wipe cache and dalvik when you flash it.
If you are looking for a newer update than the one in that thread then you'll have to find it in a TWRP flashable .zip. If there is not a TWRP flashable zip to apply the new update then the only way to flash the new update is to flash it via PC then root the device again, install TWRP again and then flash your NitrogenOS ROM again.
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

thank for the prompt response! so can i flash the latest firmware with the OS installed?

Jseven123 said:
thank for the prompt response! so can i flash the latest firmware with the OS installed?
Click to expand...
Click to collapse
I just explained what you needed to do, did you read it? It is simple, are you even reading the thread that you linked? What you are asking is irrelevant, just do what it says to do in the steps below.
1) Boot to TWRP
2) Flash the updated firmware via TWRP
3) Factory reset, wipe cache and dalvik
4) Flash NitrogenOS
5)reboot, enjoy.
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

I can't install ROMs for Espressowifi (p31xx, p51xx), but I can install ROM for p5110

For example, I can't install this ROM. https://androidfilehost.com/?fid=529141701856461698
When I install this ROM, the system doesn't boot
But I can install this ROM. https://androidfilehost.com/?fid=95916177934523996
So what's the problem?

dogukans3131 said:
For example, I can't install this ROM. https://androidfilehost.com/?fid=529141701856461698
When I install this ROM, the system doesn't boot
But I can install this ROM. https://androidfilehost.com/?fid=95916177934523996
So what's the problem?
Click to expand...
Click to collapse
which version of twrp are you running?

smart-t78 said:
which version of twrp are you running?
Click to expand...
Click to collapse
I don't use twrp.I'm using PhilZ Touch Recovery 6.59.2

dogukans3131 said:
I don't use twrp.I'm using PhilZ Touch Recovery 6.59.2
Click to expand...
Click to collapse
and thats the cause of your problem. philz touch recovery is out of date and cant handle unified espressowifi builds. if you want to use the latest roms, update to the latest common twrp by android-andi

smart-t78 said:
and thats the cause of your problem. philz touch recovery is out of date and cant handle unified espressowifi builds. if you want to use the latest roms, update to the latest common twrp by android-andi
Click to expand...
Click to collapse
the same problem was repeated for recovery.When I flash this recovery,it doesn't boot https://androidfilehost.com/?fid=673368273298980762
( I flash it using TWRP 3.0.0-0)
But when ı flash TWRP 3.0.0-0 for P5110( https://androidfilehost.com/?fid=24407100847293583 )It works perfectly

dogukans3131 said:
the same problem was repeated for recovery.When I flash this recovery,it doesn't boot https://androidfilehost.com/?fid=673368273298980762
( I flash it using TWRP 3.0.0-0)
But when ı flash TWRP 3.0.0-0 for P5110( https://androidfilehost.com/?fid=24407100847293583 )It works perfectly
Click to expand...
Click to collapse
which rom do you want to install?
when you run a unified common twrp, you cant install older device specific roms. if you run an older device specific twrp, you cant install newer unified roms.

smart-t78 said:
which rom do you want to install?
when you run a unified common twrp, you cant install older device specific roms. if you run an older device specific twrp, you cant install newer unified roms.
Click to expand...
Click to collapse
I want to install newer unified ROMs, but I can't install anything for Unified , I can only install device specific ROM and TWRP
If I install anything for "Unified espresso" (ROM, TWRP, Kernel etc.), the system will not boot, but if I install anything for device specific, the system will boot successfully

dogukans3131 said:
I want to install newer unified ROMs, but I can't install anything for Unified , I can only install device specific ROM and TWRP
If I install anything for "Unified espresso" (ROM, TWRP, Kernel etc.), the system will not boot, but if I install anything for device specific, the system will boot successfully
Click to expand...
Click to collapse
so what was the last installed samsung stock rom? 4.2.2 or 4.0.4?

smart-t78 said:
so what was the last installed samsung stock rom? 4.2.2 or 4.0.4?
Click to expand...
Click to collapse
4.2.2

dogukans3131 said:
4.2.2
Click to expand...
Click to collapse
ok.
next case is there replaced hardware in your tab (e.g mainboard, display)? you need a special kernel then. look here https://forum.xda-developers.com/ga...nified/kernel-anykernel-t3484739/post74352635

smart-t78 said:
ok.
next case is there replaced hardware in your tab (e.g mainboard, display)? you need a special kernel then. look here https://forum.xda-developers.com/ga...nified/kernel-anykernel-t3484739/post74352635
Click to expand...
Click to collapse
No

dogukans3131 said:
No
Click to expand...
Click to collapse
are you sure. maybe its a refurbished tab. try it out. install common twrp + unified rom + special kernel for your device

smart-t78 said:
are you sure. maybe its a refurbished tab. try it out. install common twrp + rom + special kernel for your device
Click to expand...
Click to collapse
Is this the kernel I need to install?
anykernel-2017-11-04-17-13-p5110-only.zip
And is this kernel compatible with Kitkat?(I'm using cm11)

dogukans3131 said:
Is this the kernel I need to install?
anykernel-2017-11-04-17-13-p5110-only.zip
And is this kernel compatible with Kitkat?(I'm using cm11)
Click to expand...
Click to collapse
backup your current system. after that try a marshmallow rom (e.g lineage 13). only to be sure

dogukans3131 said:
Is this the kernel I need to install?
anykernel-2017-11-04-17-13-p5110-only.zip
And is this kernel compatible with Kitkat?(I'm using cm11)
Click to expand...
Click to collapse
no, this kernel isnt compatible with kitkat.

smart-t78 said:
no, this kernel isnt compatible with kitkat.
Click to expand...
Click to collapse
I just downloaded Cyanogenmod 13 (device specific). Does this kernel work with device-specific ROMs? If it works, I'll try to flash the latest Unified TWRP first. If it works, I'll install the Unified ROMs.
The second question is, can I install cm 13 without factory reset(on CM 11)

dogukans3131 said:
I just downloaded Cyanogenmod 13 (device specific). Does this kernel work with device-specific ROMs? If it works, I'll try to flash the latest Unified TWRP first. If it works, I'll install the Unified ROMs.
The second question is, can I install cm 13 without factory reset(on CM 11)
Click to expand...
Click to collapse
1. i think there is no need for the special kernel on device specific roms. keep in mind that device specific builds wont be supported and wont get updates amymore.
2. no, you cant upgrade from cm11 to cm13 without factory reset. clean install is needed

smart-t78 said:
1. i think there is no need for the special kernel on device specific roms. keep in mind that device specific builds wont be supported and wont get updates amymore.
2. no, you cant upgrade from cm11 to cm13 without factory reset. clean install is needed
Click to expand...
Click to collapse
No, I want to install this kernel because I want to install Unified TWRP. If it works, then install Unified ROM

dogukans3131 said:
No, I want to install this kernel because I want to install Unified TWRP. If it works, then install Unified ROM
Click to expand...
Click to collapse
You can install unified twrp (or any other version of twrp) without installing the kernel. The rom and the kernel you have installed are completely independent of the twrp recovery. If you want to install a unified rom with a custom kernel you must first install unified twrp, then clean flash the rom and after that flash the kernel.

john99ap said:
You can install unified twrp (or any other version of twrp) without installing the kernel. The rom and the kernel you have installed are completely independent of the twrp recovery. If you want to install a unified rom with a custom kernel you must first install unified twrp, then clean flash the rom and after that flash the kernel.
Click to expand...
Click to collapse
Unfortunately, I can't enter the recovery mode when I flash Unified TWRP (after the Samsung Galaxy Tab 2 logo, the screen goes black and remains until I restart the system). I can only enter the recovery mode when I flash device specific TWRP

Development OP9-LEMONADE-A13-ROM-WATCHDOGS-JUNE 25, 2023

I AM NOT RESPONSIBLE IF YOU MESS UP YOUR PHONE!!!
YOU HAVE BEEN WARNED!!!
Watch dogs is a ROM I created and it started with the OnePlus 9 Pro back in December. I have decided to bring it to the OnePlus 9, it's based on LineageOS & crDroid source & dependencies and I thank them for its use. SafetyNet and CTS passes whether your rooted or not. Modules not required. Most features are the same as crDroid but I have made some adjustments to bluetooth quality and some fonts that are not available there, plus Gapps are included.
Before you begin, if you don't have the latest platform tools installed on your windows machine. Download it here:
DO NOT FLASH GAPPS!!!! THEY ARE INCLUDED IN BUILD!!!!!
Flashing Instructions
First time installation (clean flash):
This update requires OOS 13.1 - 13.1.0.500(EX01) firmware
Backup your data
Download the ROM, and firmware flasher listed further down on this post and place all in your platform tools folder,
Extract all the contents in platform tools, Firmware flasher in folder.
You must flash firmware in bootloader.
Boot to recovery and factory reset then adb sideload
adb sideload WatchDogs-13.0-20230625-lemonade.zip
Reboot to system
reboot to recovery if you want root
adb sideload magisk.apk or adb sideload magisk.zip
Reboot to system
Update installation:
Updates can be sideloaded with custom recovery. Updates do not appear in system updater.
Sources:
ROM
Kernel
Downloads:
ROM
FIRMWARE FLASHER
Bugs?
Let me know.

Initial builds
WatchDogs-WITHGAPPS-13.0-20230312-lemonade.zip
WatchDogs-NOGAPPS-13.0-20230312-lemonade.zip
If you require Google apps, flash the first one only!
If you do not want Google apps, flash the second one only!
You can't cross dirty flash a update which should be common sense. Example, you can't dirty flash the with gapps build then next update, dirty flash the no gapps one.

I tried CRdroid recovery and the one I was on and both said name mismatch. Got any suggestions for me to try? Thank you for the new development too!

Telegram group please

lorilucille9 said:
I tried CRdroid recovery and the one I was on and both said name mismatch. Got any suggestions for me to try? Thank you for the new development too!
Click to expand...
Click to collapse
That's weird. Did you try sideloading the firmware flasher first before the ROM? If you still have difficulties, I will post the dtbo, boot and vendor_boot files for you to flash to make it compatible. I don't have this phone. I have the OnePlus9 Pro so I can't test it. I'm sure it works or there would be other users saying the same thing.

I flashed the firmware successfully and tried it again but still got the same error. It wouldn't hurt to post the kit files and recovery for others too. If you do then I'll try again before I have to head into work in a couple hours.
UPDATE:
I used the CrDroid boot-20230106 file and then sideloaded fw_Oneplus9_IN_OOS13_F20 on both slots and was able to flash the rom on both slots successfully. Will let you know what I find in time and thanks again for another version rom to pplay with

lorilucille9 said:
I flashed the firmware successfully and tried it again but still got the same error. It wouldn't hurt to post the kit files and recovery for others too. If you do then I'll try again before I have to head into work in a couple hours.
UPDATE:
I used the CrDroid boot-20230106 file and then sideloaded fw_Oneplus9_IN_OOS13_F20 on both slots and was able to flash the rom on both slots successfully. Will let you know what I find in time and thanks again for another version rom to pplay with
Click to expand...
Click to collapse
Good deal, and no problem. Since I use crDroid sources, I figured that should work. I will still post the files necessary to flash recovery when I get a chance. Let me know if there are any bugs or issues with the ROM itself so I can work on it. Thank you!

I installed it on my first try without any problems. but I couldn't understand how it differs from crdroid.

incesu571 said:
I installed it on my first try without any problems. but I couldn't understand how it differs from crdroid.
Click to expand...
Click to collapse
Bootanimation, fonts, bluetooth, sound audio and other tweaks.

TheSayaMan said:
Bootanimation, fonts, bluetooth, sound audio and other tweaks.
Click to expand...
Click to collapse
thx bro

TheSayaMan said:
Bootanimation, fonts, bluetooth, sound audio and other tweaks.
Click to expand...
Click to collapse
Not to mention Gapps included if you choose it so OTAs with no issues... otherwise you'd have to sideload Gapps again after at least for me that's what was happening.

lorilucille9 said:
Not to mention Gapps included if you choose it so OTAs with no issues... otherwise you'd have to sideload Gapps again after at least for me that's what was happening.
Click to expand...
Click to collapse
correct, sorry, forgot to mention that as well. Thank you!! crDroid doesn't offer a with gapps build. You can use the no gapps build to flash your own gapps but I won't support force close issues with the ROM. Example, pixel setup wizard can't be used because it interfers with the default launcher. And yes, on updates, just sideload the with gapps build and your done, unless you want root, then you will have to reboot and sideload magisk because root will be gone on a update.

incesu571 said:
Telegram group please
Click to expand...
Click to collapse
There is one in my 9 pro thread. I will update when I can.

I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?

Sady94 said:
I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?
Click to expand...
Click to collapse
Convert your T-Mobile to EU as listed on another thread, then you can use the EU firmware. I will be posting a update soon with the boot, vendor_boot and dtbo. If you don't want to do that, I will post them later to flash recovery on your phone. Keep in mind that different variants act different, so you may have bugs on T-Mobile, it wasn't tested.

screenshots?

pubmastervnt said:
screenshots?
Click to expand...
Click to collapse
Not by me, maybe someone else who is running it

MARCH UPDATES: 03/24:
WatchDogs-WITHGAPPS-13.0-20230324-lemonade.zip
WatchDogs-NOGAPPS-13.0-20230324-lemonade.zip

Sady94 said:
I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?
Click to expand...
Click to collapse
You can use my custom recovery, files added in OP. You still need latest stock A13.
fastboot flash --slot all boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img

You cant install this (or any rom but base 11) on tmobile 2117 without BL unlock key. Pretty sure its not possible.
You can only convert to base global 11\OOS11 on 2117 for root, then in ui updater doesnt work OTA or manually. You can get to 13 stock only, because you need to be stock to ota, where you need a key to unlock bootloader again (conversion would bring you back to 11).
*The rooting situation with this phone sucks. I think Jaguar is the only one that will work because it is base 11.