Hey Guys. Im running cm12s on my oneplus one, and i would like to switch to oxygenOS because they are getting the touchscreen firmware fixes. Ive flashed recoveries onto multiple phones without this issue before.
I downloaded twrp, booted the phone into fastboot, unlocked it, got the success signal, flashed it, again, success, and then rebooted. Then i powered down and booted to recovery aaaand..... stock recovery. WTF? So i wipe all user data and clear the cache with the stock recovery and try again. Nope. Its still the stock recovery. i dont understand it. I tried with CWM aswell. It says success, so why did it not work? I booted into the OS and checked developer settings, and disabled update recovery and all that, Nevertheless, when i flash TWRP or CWM, it does not work. I dont understand how this could happen.
I followed the steps from the Official guide on the official oneplus forum, It wont let me post a link.
I am using an OEM samsung cable.
Can anyone help me?
fastboot reboot-bootloader ; just after recovery flash.
Orphee said:
fastboot reboot-bootloader ; just after recovery flash.
Click to expand...
Click to collapse
Alright, I've just tried that. After flashing it, i Ran this command and as expected it rebooted back to the bootloader. Nothing else todo there, so i rebooted and booted to the recovery. It STILL boots to the stock recovery! So i tried again, but this time, i flashed it a second time after rebooting to the bootloader, but that still has not worked. is my unit defective? I will try now with another computer.
Read the FAQ:
http://forum.xda-developers.com/oneplus-one/help/faq-oneplus-one-frequently-questions-t2895136
XDA Moderator
Transmitted via Bacon
I figured it out!
I figured it out. Instead of rebooting after flashing the custom recovery and allowing cyanogen to re write it, i simply turned the phone off and booted directly to recovery and sure enough, TWRP. Problem solved. I dont understand why cyanogen would do that to me and not anyone else!
theangrynoob5 said:
I figured it out. Instead of rebooting after flashing the custom recovery and allowing cyanogen to re write it, i simply turned the phone off and booted directly to recovery and sure enough, TWRP. Problem solved. I dont understand why cyanogen would do that to me and not anyone else!
Click to expand...
Click to collapse
CM didn't just do that to you, it's happened to every single person who's tried to flash TWRP after taking the Lollipop update, that's why the question is included in the FAQ thread.
XDA Moderator
Transmitted via Bacon
Related
I unlocked my bootloader and then tried to flash CWM, but after rebooting it goes back to stock recovery.
Creating a backup via CWM worked fine though, but somehow it won' flash over stock recovery
Anyone else having this problem ?
ma_moto said:
I unlocked my bootloader and then tried to flash CWM, but after rebooting it goes back to stock recovery.
Creating a backup via CWM worked fine though, but somehow it won' flash over stock recovery
Anyone else having this problem ?
Click to expand...
Click to collapse
Yes it happened to me too. There was an option that I could select just before rebooting to prevent this, but it didn't work. I was on stock kk4.4.2 at that time, after installing cm11 nightly, the recovery partition was ok after the reboot. When I later restored the kk4.4.2 to see if it is possible, I had to flash the recovery partition again in order to restore cm11.
enaon said:
Yes it happened to me too. There was an option that I could select just before rebooting to prevent this, but it didn't work. I was on stock kk4.4.2 at that time, after installing cm11 nightly, the recovery partition was ok after the reboot. When I later restored the kk4.4.2 to see if it is possible, I had to flash the recovery partition again in order to restore cm11.
Click to expand...
Click to collapse
So you just flashed CM11, even though it booted back into stock recovery ?
ma_moto said:
So you just flashed CM11, even though it booted back into stock recovery ?
Click to expand...
Click to collapse
Yes eventually Idid. Just like you, I made a backup while at cwm. After the reboot, the recovery partition was gone, and the fallen robot was shown when I selected it. I powered the motog off, did the volume down-power combination, reconnected the usb cable and entered the 'fastboot flash recovery xxxxxx.img' . After a sec or so I pressed vol down , then vol up, and I was back in revovery. Did a test to verify that the backed up kk4.4.2 worked, it did, did it all over again, and flashed cm11. This time, the question about persisting on reboot was not asked, and the revovery persisted.
Ps
I am trying to reach 10 posts in order to report a bug in the developers forum, so if it sounds like I am pulling your leg, I am not.
enaon said:
Yes eventually Idid. Just like you, I made a backup while at cwm. After the reboot, the recovery partition was gone, and the fallen robot was shown when I selected it. I powered the motog off, did the volume down-power combination, reconnected the usb cable and entered the 'fastboot flash recovery xxxxxx.img' . After a sec or so I pressed vol down , then vol up, and I was back in revovery. Did a test to verify that the backed up kk4.4.2 worked, it did, did it all over again, and flashed cm11. This time, the question about persisting on reboot was not asked, and the revovery persisted.
Ps
I am trying to reach 10 posts in order to report a bug in the developers forum, so if it sounds like I am pulling your leg, I am not.
Click to expand...
Click to collapse
I did pretty much the same thing right now and just flashed CM11 and it's working. I did delete personal and system files before via CWM but somehow some pictures i took were still there after CM11 installed I'm also still running stock recovery
Everythings seems to work fine but still...strange
ma_moto said:
I did pretty much the same thing right now just flashed CM11 and it's working. I did delete personal and system files before via CWM but somehow some pictures i took were still there after CM11 installed I'm also still running stock recovery
Everythings seems to work fine but still...strange
Click to expand...
Click to collapse
Yes I did a factory reset or something like that while on cwm just before restoring. Allways do that for a cleaner install. Since you see your photos, I guess you didn't do that part corectly.
If I where you, I whould do it once more, making sure you are flashing 'CWM 6.0.4.7 Swipe Recovery for 4.4 bootloader: CWM-swipe-6.0.4.7-falcon.img' from the thead of dhacker29.
Also make sure you flash the latest nightly directly from cyanogen. This compination will give you a persistant cwm and a 'official' dhacker29 cyanogen rom.
Only problem I have is with audio on csipclient, and the embeded one, but I will eventually reach 10 posts
enaon said:
Yes I did a factory reset or something like that while on cwm just before restoring. Allways do that for a cleaner install. Since you see your photos, I guess you didn't do that part corectly.
If I where you, I whould do it once more, making sure you are flashing 'CWM 6.0.4.7 Swipe Recovery for 4.4 bootloader: CWM-swipe-6.0.4.7-falcon.img' from the thead of dhacker29.
Also make sure you flash the latest nightly directly from cyanogen. This compination will give you a persistant cwm and a 'official' dhacker29 cyanogen rom.
Only problem I have is with audio on csipclient, and the embeded one, but I will eventually reach 10 posts
Click to expand...
Click to collapse
I used CWM directly from their site, maybe that's why it isn't working probably.
You're right i should do a clean reflash, but I'm getting sick of constantly reinstalling and configuring everything
Hi,
I wanted to flash the just released lollipop image so I unlocked my phone and updated TWRP from 2.8.0.1 to 2.8.1.0. Then I started Recovery and it was doing some werid thing in a list (was too fast), then rebooted. Recovery came up again (only the image of TWRP) and a restart again. Since then always when I try to go into recovery the starting image will show up, after 2-3 secs it gets black for half a second, then the image will show up again. This is a permanent loop. I flashed back to the old recovery but nnothing, still the same (and this one worked before!).
Hopefully someone of you knows whats wrong.
Thanks,
S3cret
reflash twrp recovery. but to correct you on your mistake before you do it, factory imgs are not flashable via any recovery, you can only flash them via fastboot.
I reflashed recovery several times now. I just thought being on the latest recovery version would be good. I know how to flash the lollipop image via fastboot, but I still need recovery for root.
I locked and unlocked the bootloader again and the same happened. Recovery started, doing some weird things and then the loop again.
Edit: Ok, I fixed it, somehow, I dont rly know how...
TWRP only starts after flashing it on my device. After a reboot, it doesn't work.
vercety974 said:
TWRP only starts after flashing it on my device. After a reboot, it doesn't work.
Click to expand...
Click to collapse
exactly the same here
Yup, dead Android with red warning triangle appears...
My stock recovery is broken after fastbooting the latest 5 image. Shows a red triangle above the laying down android.
How are we supposed to fix this?
Moreover, I've just reflashed the entire rom, and can't access the stock recovery. But the stock recovery seems to work beacause I can to factory reset via the settings menu, backup and restore.... Maybe it is the new security policy from google, to avoid that a thief make a factory reset directly from the recovery ?
So we can't navigate in the stock recovery anymore ?
Highway 55 said:
After fastboot flashing the .img files you need to (WITHOUT REBOOTING) flash custom recovery, TWRP etc... After that from the bootloader reboot into TWRP or whatever. When your in the custom recovery you need to adb push a permissive stock kernel or custom kernel as well as suspersu.zip. Again, without rebooting into the system, flash the kernel first then supersu. Now you can reboot into the system. ?
Click to expand...
Click to collapse
vercety974 said:
Moreover, I've just reflashed the entire rom, and can't access the stock recovery. But the stock recovery seems to work beacause I can to factory reset via the settings menu, backup and restore.... Maybe it is the new security policy from google, to avoid that a thief make a factory reset directly from the recovery ?
So we can't navigate in the stock recovery anymore ?
Click to expand...
Click to collapse
Yes I think it does have to do with the new selinux security stuff. I don't know the specifics. Maybe you want to refer to this thread. http://forum.xda-developers.com/showthread.php?p=56538538 @rootSU knows far more than I do. [emoji6]
Highway 55 said:
Yes I think it does have to do with the new selinux security stuff. I don't know the specifics. Maybe you want to refer to this thread. http://forum.xda-developers.com/showthread.php?p=56538538 @rootSU knows far more than I do. [emoji6]
Click to expand...
Click to collapse
It is exactly as he said in the post you linked.
Flash TWRP recovery and immidiately after run auto root. Then TWRP recovery will survive system boots.
Hi,
Just for you to know:
Model: r7plusf
Recovery: TWRP 3.0.2-0
----------------------------------------
So earlier today I did an OTA update (cm-14.1-20161205-NIGHTLY-r7plus.zip), but couldn't get my phone to boot.
So naturally, I tried wiping Cache and ART cache, but was still bootlooping.
Thought there might be someting wrong with my ROM and data, so I formated data and Installed ROM and GAPPS again after ADB pushing them onto my phone.
Now, and although CM14.1 and GAPPS are successfully installed on my Oppo R7 Plus, I can't boot into the OS. Every time I try reboot system, whether through POWER_BUTTON, RECOVERY or ADB, I just boot into Recovery.
Worst of all, for some unknown reason, I can't get into BOOTLOADER, neither through button combination, nor through Recovery nor ADB.
I found this article (http://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386) in the LG G3 thread about executing some shell commands, but I haven't tested testing it with my phone's variables because it might hard brick it...
Please Help!
[EDIT] I now have access to fastboot but still recovery looping like crazy.
I installed the same update via CyanDelta , worked like a charm ! hopefully you get back up and running.
[UPDATE] strangely I tried to flash stock recovery and boot CM13 and it worked!
Will try to flash twrp again and insall CM14
keep you up to date
Same thing happened to me! Where did you get a copy of the stock recovery? Link?
resverse said:
[UPDATE] strangely I tried to flash stock recovery and boot CM13 and it worked!
Will try to flash twrp again and insall CM14
keep you up to date
Click to expand...
Click to collapse
I had the same problem. Can't remember exactly how I resolved it. But I think, I use CM recovery to flash nightly. Then flash TWRP to flash gapps. For some strange reason, using CM recovery also show no enough disk space whenever I try to flash opengapps. But TWRP recovery can flash opengapps successfully.
Don't use the OTA, use adb sideload to flash the nightly next time. So far, adb sideload has not given me any issue to flash nightly.
Same problem...
I tried a lot of things nothing works and now I've installed the cm recovery but I have the "unauthorized phone" in terminal when I try to flash the ROM... I can do nothing because I can't enable the usb debugging. I don't know what to do.
If somebody can help I appreciate.
corbalan12 said:
Same problem...
I tried a lot of things nothing works and now I've installed the cm recovery but I have the "unauthorized phone" in terminal when I try to flash the ROM... I can do nothing because I can't enable the usb debugging. I don't know what to do.
If somebody can help I appreciate.
Click to expand...
Click to collapse
Since then I found how to fix it :
first of all I flashed cm13 through TWRP,
Then I flashed the stock recovery (Google it, I found it in OPPO forums) with fastboot,
After that I did a factory reset in the stock recovery,
Booted cm13 with stock recovery,
Then re-flashed TWRP,
From TWRP, I wiped both data and system partitions,
Then fresh installed cm14 and Gapps
And it worked!
Not sure if those are the exact steps I followed because all I did was a hole lot of messing around and trying absurd things out, but think this is how I fixed it.
Let me know if it worked for you or if you still can't fix your problem
Best of luck
Resverse
resverse said:
Since then I found how to fix it :
first of all I flashed cm13 through TWRP,
Then I flashed the stock recovery (Google it, I found it in OPPO forums) with fastboot,
After that I did a factory reset in the stock recovery,
Booted cm13 with stock recovery,
Then re-flashed TWRP,
From TWRP, I wiped both data and system partitions,
Then fresh installed cm14 and Gapps
And it worked!
Not sure if those are the exact steps I followed because all I did was a hole lot of messing around and trying absurd things out, but think this is how I fixed it.
Let me know if it worked for you or if you still can't fix your problem
Best of luck
Resverse
Click to expand...
Click to collapse
Thank you very much!!!! I'll try tomorrow and tell you.
I appreciate a lot!
First of all now works but to be honest, I don't know if the way I fix makes sense or if is correct but not for the same reason I do but I'll try to explain...
I had cm-14.1-20161218-NIGHTLY and I tried to update via OTA to 20161220 the phone reboot and I get the bootloop. The first I thought, install again the ROM making wipe data and blabla... nothing work.
I tried to "reflash" the recovery, nothing. Flashed cm recovery, it always gave me error trying to flash the rom. I tried to install with stock recovery, errors too.
I was reading hundred of post looking for my issues, device unauthorized, "error 7" in twrp... I was crazy.
At last I thought, I've been trying to install from SDcard, if I try to install from internal memory? and I install again the twrp to transfer the ROM and Gapps to the internal memory and... it worked!!!!
Long story but with happy ending.
Thank you for your help I appreciate and sorry for my english.First of all now works but to be honest, I don't know if the way I fix makes sense or if is correct but not for the same reason I do but I'll try to explain...
I had cm-14.1-20161218-NIGHTLY and I tried to update via OTA to 20161220 the phone reboot and I get the bootloop. The first I thought, install again the ROM making wipe data and blabla... nothing work.
I tried to "reflash" the recovery, nothing. Flashed cm recovery, it always gave me error trying to flash the rom. I tried to install with stock recovery, errors too.
I was reading hundred of post looking for my issues, device unauthorized, "error 7" in twrp... I was crazy.
At last I thought, I've been trying to install from SDcard, if I try to install from internal memory? and I install again the twrp to transfer the ROM and Gapps to the internal memory and... it worked!!!!
Long story but with happy ending.
Thank you for your help I appreciate and sorry for my english.
Hi.
So this was pretty stupid of me. I was trying to flash LiquidRemix onto my OP6, but I forgot to wipe the system partition. Flashed the rom, then blu_spark twrp, and rebooted into recovery to flash gapps and all. Got a black screen with a static LED. Didn't think that was a big issue cause this has happened before with normal TWRP on OB6 or OB7. Tried hard resetting to see if I could get into system, same result. Tried fastboot flashing 9.0.2, no help. And finally tried flashing OB9 via fastboot, and also no help.
I've reverted back to my tiny S6 and have sent repair request to OP. I haven't gotten anything back yet, so I thought in the mean time, I'd look for help on XDA and try to fix it before having the chance to send it in.
Any help/advice would be greatly appreciated.
Cheers
// EDIT
Figured out how to fix it. Used the MSMDownloadTool to unbrick my device. Worked wonders. Thanks to r/oneplus Discord
I did something like that I had to format data after I flashed the stock rom
mightyblazer said:
I did something like that I had to format data after I flashed the stock rom
Click to expand...
Click to collapse
How did you get to format? I really can't get into the OS or recovery at all
I was actually able to boot into TWRP maybe you can get into fastboot? And try flashing TWRP again
mightyblazer said:
I was actually able to boot into TWRP maybe you can get into fastboot? And try flashing TWRP again
Click to expand...
Click to collapse
I'm able to get into fastboot, but even if I fastboot boot [insert twrp file name here], it'd still result in the blank screen and static LED
Hmm I don't know then sorry
Try
fastboot flash boot twrp.zip
Then
fastboot reboot
You will need to use full stock rom first before doing anything else though.
I was in the same boat as you the other day. I flashed different versions of twrp until i managed to boot one because some twrp isn't compatible with pie.
Lol I never wipe system...
Might sound like a "hard-bricking" issue since you cant boot into the OS nor recovery. There 's a hard brick recovery guide, but it'll put you down to oreo OOS: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
As long as you can boot into fastboot, you can follow the guide's process with no problem.
I got my OnePlus 7 Pro today and tried to install Magisk by patching the boot.img. After trying to flash the patched image, I now have an issue where rebooting the devices leads me straight back to the bootloader. Trying to enter recovery also leads me straight back to the bootloader. I tried flashing the original boot.img I extracted from the OTA update file provided by OnePlus, but it still isn't working. I do not have TWRP or any custom recovery installed. Any help would be much appreciated. I noticed similar threads, however they all installed twrp, though I haven't yet as trying to run "fastboot boot twrp.img" always resulted in it booting to a screen saying "fastboot mode" which wasn't terribly helpful.
Edit: Its not the tmobile/5g/carrier version. I purchased it through OnePlus' website though I forget the exact model number.
Well, "fastboot boot twrp.img" does not work on all devices, sometimes you have to use: fastboot flash boot insert_twrp_img_name_here.imgLearned that the hard way, also use the unofficial twrp from mauronofrio.
Had the same problem as you have, and fixed it with that unofficial twrp.
Faith1105 said:
Well, "fastboot boot twrp.img" does not work on all devices, sometimes you have to use: fastboot flash boot insert_twrp_img_name_here.imgLearned that the hard way, also use the unofficial twrp from mauronofrio.
Had the same problem as you have, and fixed it with that unofficial twrp.
Click to expand...
Click to collapse
Did you need to completely revert to stock after the issue, or did flashing twrp fix the fastboot loop?
Edit: Trying to flash the stock fastboot rom currently as flashing twrp did nothing probably because me trying to fix it broke everything. Hopefully the stock rom will get everything back to a working state where I can try again, just this time flashing twrp.
Also using windows this time instead of linux....
mnbvcxzl90 said:
Did you need to completely revert to stock after the issue, or did flashing twrp fix the fastboot loop?
Edit: Trying to flash the stock fastboot rom currently as flashing twrp did nothing probably because me trying to fix it broke everything. Hopefully the stock rom will get everything back to a working state where I can try again, just this time flashing twrp.
Also using windows this time instead of linux....
Click to expand...
Click to collapse
Ok, so, trying to restore stock seems to have failed miserably.... any advice is most welcomed qq
OK.... so trying to unbrick the device using the msm stuff, I couldn't even make it to the downloader screen. After holding volume +/- and powering off, my screen is now black HOWEVER the phone gets detected by windows when I plug & unplug it. I have no idea what to do anymore. Someone please help
Figured I'd give the solution here in case someone else is in the same exact problem as me:
Follow the instructions over at https://forum.xda-developers.com/oneplus-7-pro/how-to/op7pro-collection-unbrick-tools-t3956595
I tried to de-brick it using the fastboot roms and all that, no dice. The only thing that seems to have worked was following the above and using the msm tool. Everything wiped, but hey, at least the phone is bootable again and now I have a way to fix it should this happen again. Yay for happy endings.
Edit: Also, following Faith1105's advice, flashing twrp to boot instead of trying to just boot it first worked successfully and from there I was able to install magisk.
Edit 2: Now wifi isn't working.... why life, why...
Edit 3: OK: EVERYTHING IS GOOD NOW. Twrp ran into a boot loop issue, used twrp to flash the most recent android 10 zip, rebooted and was greeted by stock recovery, then used that to wipe absolutely everything and reboot. After skipping through initial setup and making use wifi was working I rebooted again and this time tried booting twrp the way the usual instructions say to, this time it worked for whatever reason so once that started I used twrp to flash twrp's installer and magisk. It looks like everything is working correctly now. If you have the same issue maybe this stuff will work for you or maybe not: I don't know, and honestly I'm now brain dead lol.