I have a TV110 (Amlogic S805, 1gb/8gb) Android TV Box. I was trying to replace the stock ROM with Openelec v5.0.8 from Kerber. The update went fine until it rebooted to launch Openelec then it hung at the Openelec logo for over an hour. I thought the box was hung so I removed power and rebooted. It hung again in the same place so I decided to use the reset button to launch recovery. I must have cycled power too quickly because it would only show the boot logo and would go no further. Something was seriously wrong with the box.
I created a bootup SD card with TWRP recovery on it. I booted up into TWRP 2.8.6 without any issues but could not restore any of the partitions. TWRP was getting errors trying to mount all the partitions. I figured I could go back to stock (I have a NAND backup). When I try to wipe or restore it fails because the partitions are not mounted. I tried to install the old firmware using the install from TWRP and I get "Error executing updater binary in zip".
At this point I am stumped. What do I do next?? How do I get my box bootable again?? Can I somehow re-create the partitions??
Any help would be appreciated.
Related
I have the Nexus S from Telus.
It was rooted, unlocked, running CM7. However I've been having issues with it freezing and decided I want to go back to the stock rom.
I ended up downloading what I thought was stock ROM for my phone (Stock GRH78 Nandroid Backup in this Tutorial http://forum.xda-developers.com/showthread.php?t=884093) however after it flashed my phone, I ended up with a phone which was essentially stuck in Airplane mode, would not connect to Telus. I'm guessing that it has the wrong radio for my phone/carrier?
So then I ended up finding a zip file someone posted Stock-GRJ22-i9020A-unsigned which should have worked, I ended up flashing the zip file from recovery.
It said it installed fine. Rebooted, and now the phone just cycles the Samsung Loading screen endlessly.
I tried to go back to recovery, and it gives me yellow triangle with !.
Is there any way to flash the recovery image back to the phone?
I plug the phone in and the PC won't recognize a device.
I installed the Android SDK
Ran the command adb devices, no devices attached to the PC.
I tried fastboot devices - blank
I don't know how I'll be able to get files back onto the phone SD Card for flashing etc...
I had the exact problem two days ago...flashed an image that jacked my phone up. Wouldn't boot past the google logo. Sat there indefinitely.
Read this thread and see if you can get it work. In a nutshell, you need the PDA net drivers installed. Since PDA net can't install the app on your phone (because it's not booted into an OS) leave the install program in limbo and voila, fast boot will work. From there, push the recovery.img (google Clockworkmod recovery image), boot into recovery and you are off to the races.
This is, of course, assuming you already have a ROM image on your internal SD card you can flash to get back up and running. I'm not sure how to install a .zip image ROM if you can't gain access to your SD card.
http://forum.xda-developers.com/showthread.php?t=1303522
Good luck, I know the feeling. It blows.
Ah, just found out how to install a file on a phone that won't boot.
You do need to flash CWM recovery first though.
http://forum.xda-developers.com/showpost.php?p=18437305&postcount=2
Good news! I tried a factory reset/data wipe and rebooted the phone.
It doesn't hang anymore, all functions restored and the phone is working on Telus again!
I guess I had to format data, clear cache, before the flash of the rom.
So relieved.
Issue has been solved!
Hi. Just got a Note2 which was running 4.4.2
I downloaded Odin3-v3.07 and got root access. I then used a checker to confirm.
From there, I used the TWRP Manager to install 2.8.7.0.
I think this is where things went wrong. I know I selected the correct phone model, but it gave me an error saying something went wrong ( I think it said something about me having the latest TWRP) . Then my phone rebooted and took me into TWRP.
I made a backup and tried to flash the CM12 rom for sgh-i317m.
That's when I noticed I couldn't get out of TWRP. Rebooting or pulling the battery has no effect. Phone keeps booting into TWRP. I tried wiping delvic cache, cache and other things, but no matter what I do I can't boot into the OS. I tried restoring and it says it was successful, but again am stuck in TWRP. I've now spent the last hour searching for a way to get out and still can't find a solution. Any help would be greatly appreciated.
Notes:
Not sure if this has anything to do with it, but I had forgotten to enable USB debugging when I was in my OS.
Another thing I noticed is when I open the terminal command, there's a running boot script error: E:/sbin/runatboot.sh process ended with ERROR=1
Problem resolved: I booted into download mode and used Odin to root again. That seem to overwrite whatever was causing the Note 2 to be stuck booting into TWRP.
I enabled USB debugging and installed TWRP again. Got the same error but this time chose not to reboot into recovery. Then I rebooted manually, and the phone boots into the OS. I powered down and held Vol up + power + menu and released power button at Samsung logo, and was successful in booting into TWRP. Exited and rebooted took me back to the OS. So I'm not quite sure what it was the first time around that got me stuck into booting TWRP everytime.
Glad you got it fixed! :good:
I'll close this thread.
Hello! I installed BlissPop on my tablet before getting the new one from the callback program. This worked fine for several months, until suddenly the tablet decided not to boot.
The current situation:
The tablet boots onto the Nvidia logo, stays there for about 3 mins, then starts booting BlissPop. The boot is then stuck at the BlissPop animated loading screen. (It does not freeze the tablet or anything like that)
The tablet is not bricked (I think). I do not get the bricked error when checking on serial number. I dont remember which version of BlissPop i flashed over half a year ago.
What I have tried:
1) Flash a new custom ROM through Recovery, installing from zip through adb. I get an error while installing from zip:
- mount: failed to mount /dev/block/platform/sdhci-tegra.3/by-name/UDA at /data: Invalid argument.
- unmount of /data failed; no such volume.
- Patching system image unconditionally
Also, I cannot mount /data or /cache from CWM. Is my partition table messed up?
2) Flash to stock recovery image, through fastboot.
These steps always end up in the same way, nothing has happened during the flashing or installation. The device is still in the same state.
3) I tried installing another recovery type (now using CWM v.6.0.5.0), but I always end up with the old one.
What seems to be the common result on whatever I try, is that nothing happens. I even tried erasing all the data from the tablet, but nothing changes. Still boots into BlissPop and is stuck there. It seems like I cannot write anything to the tablet. Recovery mode (CWM) is also VERY slow, and it takes about 3 mins to get into CWM from fastboot bootloader screen.
Does anyone have any idea what I'm doing wrong, or have any tips for new things to try out?
Hey all,
I'm not a total noob, but I do this so infrequently that I can't commit it to memory. Would really appreciate some help here.
I followed the official LineageOS Guide for Herolte, over here.
I had done this previously on my Nexus 7 so I was fairly confident.
Everything worked well, I got TWRP installed using Heimdall from Linux, and successfully pushed the latest LineageOS and open_Gapps images to the phone.
Rebooted into TWRP, and followed the recommendation to wipe System, Cache and data partitions. This failed with red text stating that ti was unable to mount data.
I googled some, and found a suggestion to reformat the partitions, first to a different file system and then back to their original file systems again. I tried formatting /data to exFat, and it took forever, eventually erroring out with an error message. After this I can't get into TWRP anymore. When I try the phone boots to the TWRP startup screen, and just freezes there.
I have tried reflashing TWRP using Heimdall and this does nothing. Flash succeeds, nut still freezes at TWRP splash screen.
I googled some more and found a suggestion to flash stock Samsung firmware, and then try again, this time formatting data system and cache without trying to first wipe them. Problem is I can't successfully flash stock firmware.
I tried using this method in Heimdall, but it complains "Local and device PIT files don't match and repartition wasn't specified!" and fails.
I've also tried booting into Windows and using Odin, but it never works. The screen turns grey, and no progress indicators ever start. I assumed this was because I had the incorrect drivers for the phone, and tried using zadiag.exe to replace them, but the driver install fails.
I'd greatly appreciate any help. I can't seem to force the phone to shut off, it just keeps rebooting and getting stuck on either the TWRP spash screen or on the download mode screen. I know this is solveable, but unless I figure it out fast, I'm worried I am going to burn in the screen.
Any suggestions appreciated!
Never mind. I must just have had a bad stock image.
I downloaded a different one, and retried heimdall and it flashed properly.
I am now able to re-flash and boot into TWRP again.
Hopefully I won't have the same problem again when I try to wipe the partitions...
Alright,
So I solved this issue by (once I reflashed stock, and then reflashed TWRP again) formatting the data partition twice, first to ext3, and then back to ext4. This looks to have cleared the encryption issues that were causing thsi problem ,and allowed everything to continue working as expected.
I've got an old Samsung Galaxy Note 10.1 (N8010) which was flashed to a custom ROM (Cyanogenmod) in 2016. I'm not sure what version because I'm unable to boot it. A few weeks ago, the tablet rebooted without reason and got stuck on the Cyanogenmod bootscreen forever. I've let it run for 24 hours without result.
So this is what I tried:
Reboot into recovery mode (TWRP 2.8.6.0) and wipe everything. Then I tried to flash a different ROM, but when the device reboots, everything seems to be reset and it tries to boot the old corrupted ROM again. I also tried a newer version of LineageOS. But for that, I need a newer TWRP version. So I download and put the newest TWRP version on it using ODIN mode. Flash Passes says ODIN, but after reboot, TWRP 2.8.6.0 is still being loaded. I tried it again without 'reboot' checked so I can reboot directly back into recovery manually, but this also, didn't worked. (by the way, ADB works when loading TWRP, FASTBOOT doesn't work when loading ODIN mode, fastboot doesn't recognize the device)
I tried to flash stockrom back onto the device, also using ODIN mode. Flash passes, no errors. Device reboots and.. nope! It still tries to load the old Cyanogenmod forever.
I'm basically stuck here. I can't update to a newer Recovery and I cant flash the rom because everytime I reboot the device, everything change i made is gone.
I noticed that when I list files in /data the folder seems to be empty.
I also tried to reformat /data to fat and back to ext4 but formatting to fat fails and formatting to ext4 succeeds, however, after a reboot, everything i did seems to be undone by the device. Even the time and date is reset.
Is there a way I can bring back my tablet back to life? Thank you!
I have pulled the recovery.log file and uploaded it to pastebin.
I can't post a link to it because I do not have made 10 posts yet.. (very anoying). So i put the adress here:
https://pastebin.com/3muqPMzz
FSCK check on /data returned this:
Code:
~ # e2fsck /dev/block/platform/dw_mmc/by-name/USERDATA
e2fsck 1.41.14 (22-Dec-2010)
/dev/block/platform/dw_mmc/by-name/USERDATA: recovering journal
Superblock needs_recovery flag is clear, but journal has data.
Run journal anyway<y>? y
yes
e2fsck: unable to set superblock flags on /dev/block/platform/dw_mmc/by-name/USERDATA
And Odin mode: NAND ERASE ALL returns
Code:
<ID:0/006> Complete(Write) operation failed.
It seems like my Note 10.1 tablet is suffering from the emmc brick bug.
niquedegraaff said:
I've got an old Samsung Galaxy Note 10.1 (N8010) which was flashed to a custom ROM (Cyanogenmod) in 2016. I'm not sure what version because I'm unable to boot it. A few weeks ago, the tablet rebooted without reason and got stuck on the Cyanogenmod bootscreen forever. I've let it run for 24 hours without result.
So this is what I tried:
Reboot into recovery mode (TWRP 2.8.6.0) and wipe everything. Then I tried to flash a different ROM, but when the device reboots, everything seems to be reset and it tries to boot the old corrupted ROM again. I also tried a newer version of LineageOS. But for that, I need a newer TWRP version. So I download and put the newest TWRP version on it using ODIN mode. Flash Passes says ODIN, but after reboot, TWRP 2.8.6.0 is still being loaded. I tried it again without 'reboot' checked so I can reboot directly back into recovery manually, but this also, didn't worked. (by the way, ADB works when loading TWRP, FASTBOOT doesn't work when loading ODIN mode, fastboot doesn't recognize the device)
I tried to flash stockrom back onto the device, also using ODIN mode. Flash passes, no errors. Device reboots and.. nope! It still tries to load the old Cyanogenmod forever.
I'm basically stuck here. I can't update to a newer Recovery and I cant flash the rom because everytime I reboot the device, everything change i made is gone.
I noticed that when I list files in /data the folder seems to be empty.
I also tried to reformat /data to fat and back to ext4 but formatting to fat fails and formatting to ext4 succeeds, however, after a reboot, everything i did seems to be undone by the device. Even the time and date is reset.
Is there a way I can bring back my tablet back to life? Thank you!
I have pulled the recovery.log file and uploaded it to pastebin.
I can't post a link to it because I do not have made 10 posts yet.. (very anoying). So i put the adress here:
https://pastebin.com/3muqPMzz
Click to expand...
Click to collapse
Some of what you describe seems to suggest that your internal sdcard is corrupted, but, you still have TWRP booting. I would think that TWRP wouldn't boot if the internal was damaged.
Sent from my LGL84VL using Tapatalk
I can boot twrp but anything I do in there is temporary. I can't write to the internal SD. Only read. Seems like the emmc brick bug to me. I wish there was a way to check if this is absolutely true.