Hi folks,
This evening I decided to install Cyanogenmod on my Moto G. All seemed to go fine until I started getting "Unfortunately, System UI has stopped" errors that meant I couldn't even get into any of the phone's menus. I tried to reset the phone to reinstall the ROM, but got stuck in a boot-loop where the phone won't boot to allow my PC to see it, so I can't copy the necessary files to it to re-flash the ROM. I also can't push them with ADB for the same reason.
I am stuck! Please offer any advice. Thanks!
evh5150ni said:
Hi folks,
This evening I decided to install Cyanogenmod on my Moto G. All seemed to go fine until I started getting "Unfortunately, System UI has stopped" errors that meant I couldn't even get into any of the phone's menus. I tried to reset the phone to reinstall the ROM, but got stuck in a boot-loop where the phone won't boot to allow my PC to see it, so I can't copy the necessary files to it to re-flash the ROM. I also can't push them with ADB for the same reason.
I am stuck! Please offer any advice. Thanks!
Click to expand...
Click to collapse
did you install a custom theme? does your computer recognize your phone when in recovery?
Just a failed installation of Cyanogenmod. Windows can recognise the phone but gives an error when installing the driver, meaning I can't copy anything to it to re-flash.
On the phone itself, I can get into TWRP in recovery mode, but I don't know how to get files onto it to re-flash.
evh5150ni said:
Just a failed installation of Cyanogenmod. Windows can recognise the phone but gives an error when installing the driver, meaning I can't copy anything to it to re-flash.
On the phone itself, I can get into TWRP in recovery mode, but I don't know how to get files onto it to re-flash.
Click to expand...
Click to collapse
Go to my profile, and I started a thread about this. Go to "started by".
My work: SmoothGKernel for the Moto G, and remember always hit the thanks button if anyone helped.
Related
On my phone I was running CM10. I recently downloaded the nightly for CM10.1. So I went into CWM, flashed the new 10.1, Gapps, then wiped Data and Factory Reset. When I was done and rebooted my phone, It gets stuck in a loop of "Unfortunately Setup Wizard has stopped. I try to turn the phone off but the power button seems useless. Is there a way for me to fix this. Any help will be greatly appreciated!
To make things worse my PC crashed a few days ago and I had to purchase new Hardware and is back up and running, but with a fresh install.
FinalTrigger said:
On my phone I was running CM10. I recently downloaded the nightly for CM10.1. So I went into CWM, flashed the new 10.1, Gapps, then wiped Data and Factory Reset. When I was done and rebooted my phone, It gets stuck in a loop of "Unfortunately Setup Wizard has stopped. I try to turn the phone off but the power button seems useless. Is there a way for me to fix this. Any help will be greatly appreciated!
To make things worse my PC crashed a few days ago and I had to purchase new Hardware and is back up and running, but with a fresh install.
Click to expand...
Click to collapse
If you can't turn the phone off then pull the battery.
So I am able to get back into CWM. New Problem...When i go to chose zip from internal SD card, i get 3 options:
-0/
-legacy/
-obb/
When i go into the first one I see my downloads folder, when i go to it says "No Files Found". Ok.....so i go to my external SD and select a different zip I get the dead Andy and it says
"E:Cant open/external_sd/(Rom Zip)
(bad)
Installation Aborted
FinalTrigger said:
So I am able to get back into CWM. New Problem...When i go to chose zip from internal SD card, i get 3 options:
-0/
-legacy/
-obb/
When i go into the first one I see my downloads folder, when i go to it says "No Files Found". Ok.....so i go to my external SD and select a different zip I get the dead Andy and it says
"E:Cant open/external_sd/(Rom Zip)
(bad)
Installation Aborted
Click to expand...
Click to collapse
You should have choose O. It also helps to remember where you put the flashable zip of the ROM.
"Unfortunately Setup Wizard has stopped." is because you flashed the wrong gapps. make sure you have the latest for CM10.1 which i believe is 20121212.
Last night, I messed up with my android. I am not able to figure out what went wrong
So here is exactly what I had been doing:
1. My phone is already unlocked.
2. I had root my phone by installing "r1-primo-superboot" ( I had used the gsm version)
3. Next, I had flashed a recovery image using fastboot.
4. Installed "Blue Sense". Everything was going well. MADE A NANDROID BACKUP.
5. After an hour, tried to install CM10. Didn't work. Get's stuck in the logo screen of CM10.
6. So flashed "hellboy.img"
7. Now, CM10 gets installed. But gets error notifications like "your phone has stopped". There is no option for text or call or settings.
8. Now I try to go back to "Blue sense" through RECOVERY but, it doesn't work. I'm stuck.
IS THE PROBLEM DUE TO FLASHING OF TWO DIFFERENT .IMG FILES? Please help. I am a noob.
abhilekh619 said:
Last night, I messed up with my android. I am not able to figure out what went wrong
So here is exactly what I had been doing:
1. My phone is already unlocked.
2. I had root my phone by installing "r1-primo-superboot" ( I had used the gsm version)
3. Next, I had flashed a recovery image using fastboot.
4. Installed "Blue Sense". Everything was going well. MADE A NANDROID BACKUP.
5. After an hour, tried to install CM10. Didn't work. Get's stuck in the logo screen of CM10.
6. So flashed "hellboy.img"
7. Now, CM10 gets installed. But gets error notifications like "your phone has stopped". There is no option for text or call or settings.
8. Now I try to go back to "Blue sense" through RECOVERY but, it doesn't work. I'm stuck.
IS THE PROBLEM DUE TO FLASHING OF TWO DIFFERENT .IMG FILES? Please help. I am a noob.
Click to expand...
Click to collapse
Here is solution , don't forgot to hit thanks
:: youtube . com/watch?v=nHzmGny6mLA
abhilekh619 said:
Last night, I messed up with my android. I am not able to figure out what went wrong
So here is exactly what I had been doing:
1. My phone is already unlocked.
2. I had root my phone by installing "r1-primo-superboot" ( I had used the gsm version)
3. Next, I had flashed a recovery image using fastboot.
4. Installed "Blue Sense". Everything was going well. MADE A NANDROID BACKUP.
5. After an hour, tried to install CM10. Didn't work. Get's stuck in the logo screen of CM10.
6. So flashed "hellboy.img"
7. Now, CM10 gets installed. But gets error notifications like "your phone has stopped". There is no option for text or call or settings.
8. Now I try to go back to "Blue sense" through RECOVERY but, it doesn't work. I'm stuck.
IS THE PROBLEM DUE TO FLASHING OF TWO DIFFERENT .IMG FILES? Please help. I am a noob.
Click to expand...
Click to collapse
i am having same exact problem in almost same scenario, what did you do to restore your phone back to normal ?
Hello, I need serious help with my phone.
So, after a long while of having my phone rooted, and had a case of boot loop with twrp, I decided to go back to stock os and hung up the root days. I thought i did it right by getting a stock os and flashed it, and it worked for couple months, until yesterday.
My phone keeps going into Cyanogen Recovery, I tried rebooting so many times, once it did boot up to OS, but it went back after i restarted phone or it died.
Now I can't no longer get back, I thought factory resetting will work but it didn't. (Tried both wipe cache partition and Full factory reset option from the recovery) I found unroot your phone toolkits, thinking it could help fix my problem and just unroot/ give me back to OS (I wished i found this before flashing that custom stock rom).
But the toolkit doesn't work for me, it finds adb devices, but it cant find fast boot devices, because my phone cant even go into fast boot.
I tried manual, and the option from the recovery, it keeps going back to recovery. I have an option for apply update, and then apply from ADB, that was the only way for my pc to recognize my phone from adb devices. Any clues on how to fix?
Hi !
I may suggest you this thread https://forum.xda-developers.com/oneplus-one/general/tool-oneplus-one-return-to-stock-t2970390
Good luck !
xanthrax said:
Hi !
I may suggest you this thread https://forum.xda-developers.com/oneplus-one/general/tool-oneplus-one-return-to-stock-t2970390
Good luck !
Click to expand...
Click to collapse
Will try, Ill respond back if anything happens!
Hmm I'm still having trouble because, I can't get into fast boot for some reason. It's keep going back to Cyanogen recovery. It has the option to reload into bootloader, but goes into cyanogen recovery again.
There is an option in dev options, uncheck the "update cyanogen recovery" and flash twrp again
Sent from my SHIELD Tablet using Tapatalk
Hi there,
I am a newbie and hoping that someone could help to give me some clear pointers about options that i could take to rescue my phone - I hope its not bricked.
I was attempting to install LineageOS 16 on my Oppo R7s. This is my second attempt at installing a ROM - I did it a couple of weeks ago with Project Spectrum, and it worked, but Project Spectrum didn't impress me, so i wanted to try lineage OS instead).
I entered developer mode and enabled USB debugging
I downloaded the LineageOS zip to my SD card, as well as a Google Apps zip.
I downloaded the TWRP app on my phone just in case it was needed, however I've never used that app and not 100% sure how to use it.
I rebooted in recovery mode, and tried to install from the LineageOS zip file. It didn't start installing, I got some error message which I cannot recall... so I tried wiping the application data first, to see if that would help (maybe that was my mistake??)
I then went back to the install menu, and tried to install the Google Apps package first.... it started downloading, but then crashed and black screened.
Now, when I try to power on the phone, I get the oppo logo, and then it briefly goes back to the install screen for a second, with a message on the screen saying: "updating please wait, do not remove battery, do not co other operations" - but this only lasts for a second, then it crashes.
When I try to reboot into recovery mode (Power key +volume down), it does the same thing. I cannot get back to the white recovery menu.
Is there any way that I can rescue the situation and get back into recovery mode to try again? Or get back to a functioning USB connection so I can load a new ROM zip to try that instead?
When I plug it into the power, I get no indication that the phone is charging.
I'm worried the battery will go flat.
I have ADB installed on my computer, but I dont really know how to use it - the only command I know is "adb push" to load the roms onto the SD Card
Any advice on how to get access again would be greatly appreciated!
Hi,
Since yesterday, my phone suddenly went into a bootloop (I wasn't even using it, but it suddenly started vibrating every half a minute or so). I'm able to get into fastboot mode, but from there if I try to boot into TWRP, it just shows the splash screen for a bit, and then crashes and reboots again. I should say that this is my brother's old phone he gave to me, so I'm not exactly sure what he's done to it, and I'm also not particularly familiar with Android stuff myself.
Is there anything I could try to retrieve data from the device? I've managed to run a different recovery img (included in here: https://onepluscommunityserver.com/list/Unbrick_Tools/OnePlus_One/), which allowed me to use ADB from my MacBook, and from there I tried to use the adb backup command, but this just gives me "Now unlock your device and confirm the backup operation..." without actually showing anything on the phone.
And even if I can't recover anything, is there anything I could try to bring the device back into a working state?
since your fastboot is working, you can try downloading the bacon roottoolkit and restore stock rom, before doing that install all the drivers like it mentions in the app. https://androidfilehost.com/?fid=95916177934555863;
Let me know if this works