I idiotically flashed the micro max unite 2 OTG support zip and then my sd card gone damaged and then agin when i restarted my phone several times the phone didn't started.It is Stuck at the boot Logo i tried to go to recovery mode but i was unable and i also tried ADB but it is showing no devices found so Someone Please help me ! Thanks In Advance !
XDA Visitor said:
I idiotically flashed the micro max unite 2 OTG support zip and then my sd card gone damaged and then agin when i restarted my phone several times the phone didn't started.It is Stuck at the boot Logo i tried to go to recovery mode but i was unable and i also tried ADB but it is showing no devices found so Someone Please help me ! Thanks In Advance !
Click to expand...
Click to collapse
Sounds similar to this issue: [Q] Bricked A310 by Smartashu1.
Maybe the suggested solution will work in your case too.
If not, please register on xda and ask in the Canvas Nitro A310 / A311 Q&A, Help & Troubleshooting forum.
Remember to provide as many details about your exact device and model name, the firmware version, what you have done, etc. as possible to get better help and advices.
Good luck !
Thread closed. Thank you!
Related
dear all ,
please help me ...i got a oppo n1t trying to install color os 2.0 on it it show some error while installing but after that when i rebooted the phone it comes as blank screen like tv without cable ,... if i go to recovery mode same screen or if i go to fastboot mode same screen so kindly help me in this issue ... i already changed it stock recovery to cwm recovery but now i think phone bricked... is there any help for me plz help... now i have its stock rom but can not get display to see recovery
plz help ... i need help badly
ps: first time i tried to install custom rom ...with failure
XDA Visitor said:
dear all ,
please help me ...i got a oppo n1t trying to install color os 2.0 on it it show some error while installing but after that when i rebooted the phone it comes as blank screen like tv without cable ,... if i go to recovery mode same screen or if i go to fastboot mode same screen so kindly help me in this issue ... i already changed it stock recovery to cwm recovery but now i think phone bricked... is there any help for me plz help... now i have its stock rom but can not get display to see recovery
plz help ... i need help badly
ps: first time i tried to install custom rom ...with failure
Click to expand...
Click to collapse
Hey!
I would recommend you to post your question in the specific device section i.e. here Oppo N1 > N1 Q&A, Help & Troubleshooting .
Cheers
hi guys can you help me, i have some problems, 1. my phone is boot loop, 2 my cwm cannot detect sd card , 3 i cannot go to droid boot (i've tried to prees power + up/down but stuck on the phone logo )
okay last day i've tried to flash my phone with new custom rom, but unfortunately my phone was boot loop it always stuck on the logo lenovo (my phone is Lenovo A706_ROW), i did flash from internal storage , so even i tried to copy the stockrom to sd card it wouldn't appear on cwm so i didn't have rom in my phone. So i asked to my friend, they said i should do droidboot, nah the second problem was came i couldn't go to droid boot to did re flash my phone, so please help me to solve my problemmy device is Lenovo A706_Row
4.1.2 jellybean
3.4.0 kernel
Hi
Thanks for writing to us at XDA Assist. It's a bit hard to direct you properly without knowing all of the specifics, but a quick search allowed me to find this thread:
The Lenovo A706 Owners' Thread (Root/CWM/Other Discussions)
I'd suggest you take a look there, it has some really good information that can probably help you, and if you can't work it out you can ask some other A706 owners to see if they can guide you out of your problem.
Good luck!
Thread closed, thanks.
Hi to All...
I tried to install CWMR to huawei g610-u20 and the cell got stucked to boot loop. I tried to resolve issue with SP flash tool but unable to do any type of recovery as phone restarts after few seconds ! Due to restarting again and again it is not possible to load driver of the device as it connects and disconnects shortly. unable to do sd card recovery ! plz help
M.A.Awais said:
Hi to All...
I tried to install CWMR to huawei g610-u20 and the cell got stucked to boot loop. I tried to resolve issue with SP flash tool but unable to do any type of recovery as phone restarts after few seconds ! Due to restarting again and again it is not possible to load driver of the device as it connects and disconnects shortly. unable to do sd card recovery ! plz help
Click to expand...
Click to collapse
Hi, thank you for using XDA assist.
Looks like there is no dedicated forum for your device yet.
However there is a general forum for android here http://forum.xda-developers.com/android/help where you can get better help and support if you try to ask over there.
Good luck.
Sent from my A0001 using Tapatalk 2
Hi , I am in great trouble.
I was trying to root my micromax canvas a1 (AQ4501) phone using Android One ToolKit and got stuck in android logo .
Later I format memory (system,cache,internal,external .
I think I also removed all the recovery points and backup.
After that trying to reboot device through Toolkit ,it showed NO OS installed.
Now, Unable to see anything except Micromax Logo.
-------------------
Even unable to use Android one toolkit , cause my phone is not booting in any mode except for recovery mode and to go in recovery mode I have to use Volume+Power key combinations 2 times, ONCE:: when phone is switched off and SECOND:: when it shows a lying robot with somme red '!' sign.
------------------
Please help me.
XDA Visitor said:
Hi , I am in great trouble.
I was trying to root my micromax canvas a1 (AQ4501) phone using Android One ToolKit and got stuck in android logo .
Later I format memory (system,cache,internal,external .
I think I also removed all the recovery points and backup.
After that trying to reboot device through Toolkit ,it showed NO OS installed.
Now, Unable to see anything except Micromax Logo.
-------------------
Even unable to use Android one toolkit , cause my phone is not booting in any mode except for recovery mode and to go in recovery mode I have to use Volume+Power key combinations 2 times, ONCE:: when phone is switched off and SECOND:: when it shows a lying robot with somme red '!' sign.
------------------
Please help me.
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
then, you may ask for help here: (see below)
Micromax Canvas A1 Q&A, Help & Troubleshooting
Your device experts are located there....(You will have a much better chance of getting help there)
Also, here is the Main Micromax Canvas A1 Area just in case:
http://forum.xda-developers.com/canvas-a1
Always Remember to use the Search...
Thank you! Hope this help!
help needed for canvas A1..."Checking connection ... This might take a while.... "
hi all,
My canvas A1 is running on android 6 marshmallow, few days ago i did a Factory reset on my phone, while the phone was rebooting after wiping all the data , It asked to setup sim card and WiFi after i entered the WiFi password it connected properly and the screen showed "Checking connection.. This might take a while.." .. so i waited but it is remaining is that screen, there is no option to skip that setting.... I have tried rebooting from recovery.. wiping cache partition but again it is struck on that screen................... when i googled about this i saw same problem has happened to some Nexus devices also .. but they are not mentioning any solutions for this.. so If anyone has any idea please help....
Thanks in advance........
Hi,
Thanks for using XDA Assist
Instead of posting in a general thread, you should try asking for help here:
Canvas A1 Q&A, Help & Troubleshooting
Good luck!