Model: Moto e XT1022 (India)
Hi,
Sorry If this is not the right place or right question to ask here, I have done a lot of research and may be my question matches with the siliar questions already asked.BUT definitely my problems seems to be different. Please help me out of this.
I tried unlocking the bootloader successfully with (status code:3 and I am getting bootloader unlocked warning message instead of moto logo)
I tried flashing custom recovery TRPW and CWM but its not going well and I am getting error message
<bootloader> failed to erase partition,
<bootloader> failed to erase recovery partition
FAILED (remote failure)
my device ID is getting listed using "fastboot devices" but NOT using adb commands "adb devices"
Earlier I had updated my moto e kitkat 4.4.4 to lollipop 5.0.2 and I was facing lag issue and one day it went to infinite bootloop.
Now I am unable to flash any of the partition using below commands
ALL the commands below are giving error as "Unable to erase Partition......"
mfastboot oem lock begin
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Any help would be greatly appreciated.
Thanks in advance
Hi, thank you for using XDA Assist. The best palce to ask your question is here, http://forum.xda-developers.com/moto-e/help
Don't forget to register on XDA to post questions in the forum.
Thread closed.
Related
Hey guys. A while back I tried to flash 5.0.1 on my moto g. Some errors popped up when it started up. I cant remember exactly what it was but I went back to recovery and rebooted and now im in a boot loop. Im just trying to get back to stock seeing as I wont be using this phone as a phone but more as a media device. Its has TWRP 2.8.4.0 and my computer recognizes it as XT1034 when Im in twrp but when its in fastboot its recognized as a falcon device. I tried using this guide here "http://forum.xda-developers.com/showthread.php?t=2542219" But it just sits at "waiting for device" in the command prompt. Any help would be greatly appreciated!
Install the correct drivers for your PC from here:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
and then reflash the latest software for your phone. Download your firmware from here:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
after you downloaded the firmware and installed mfastboot and adb drivers corectly open a command prompt window with this option:
Open the folder where you extracted the firmware (where you can find gpt,boot, recovery etc..) and right click with SHIFT button on your keyboard pressed down and you'il find an options open a command prompt window here and click on it now paste and enter this commands:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Now your phone will boot
hello XDA i just flashed moto g4 plus with latest firmware with android version 7.0 security patch level 1 nov 2016 baseband version M8952_70030.25.03.60R ATHENE_INDIA_DSDS_CUST built number NPJ25.93-11 but my bootloader is unlocked so i just want to know is there any way to lock bootloader and also i want to know since my bootloader is unlocked will i get further OTA updates or not..... please help me friends regarding this thanks in advance.....
XDA Visitor said:
hello XDA i just flashed moto g4 plus with latest firmware with android version 7.0 security patch level 1 nov 2016 baseband version M8952_70030.25.03.60R ATHENE_INDIA_DSDS_CUST built number NPJ25.93-11 but my bootloader is unlocked so i just want to know is there any way to lock bootloader and also i want to know since my bootloader is unlocked will i get further OTA updates or not..... please help me friends regarding this thanks in advance.....
Click to expand...
Click to collapse
Hello,
You'll have to reflash the latest stock firmware of your device and end it up with oem unlock command.
Full reflash sequence:
Code:
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem fb_mode_clear
mfastboot oem lock
You do get OTA updates after unlocking the bootloader but it is not recommended to install OTA updates.
You can fastboot newest firmware,
Also please register for XDA account to post and reply in the forum.
Regards
Vatsal,
Forum Moderator.
i updated my moto G4 plus to Android N using Blur.zip file after that i realze that is not offical so i try to downgrade back to Andriod M
1. I downloaded the Marshmallow firmware from xda
2.i downloaded ADB folder and moto device manager .
3.after these step i forgot to unlock my device and i forgot to toggle OEM in Developer > OEM Allow
4.i just directly copy the firmware into adb and run below commands directly from run.bat it contains follows
mfastboot oem fb_mode_set
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash dsp adspso.bin
mfastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem fb_mode_clear
some commands executed and some commands failed because i am not unlocked the my device (error like sign verification fail) i directly runned thesecommands so my phone will not downgarded but it will just flash the phone .
after that i just switch on the device and every thing erased it asking 2 option for enter
1. to set it up? Restore a backup or copy from a device
2. Set up as new
if i select any these 2 option
wifi will not detecting so i need your help wifi
1. how to repair wifi
or
2.how to bypass these step
or
3.In bootloader loop using cmd how to make allow OEM turn on
help me ..........please
[email protected]
Hi there,
I see you already founded the right forum for your device here:
http://forum.xda-developers.com/moto-g4-plus/help/how-to-allow-oem-unlock-using-cmd-t3521550
Please wait an answer from experts/owners there.
Good luck
Hi Everyone,
I am a newbie, therefore I do not have much experience with some of the softwares.
The other day my son dropped his Motorola Moto G first gen XT1039.
This is an australian model.
When I tried to turn it on, it came up with a black screen.
So I thought I will wipe the cache partition, but I was not able to go into recovery, because it was stuck in a boot loop.
Finally I managed to unlock my boot loader going via the motorola site.
I have downloaded mfastboot-v2.zip which I extracted to a folder called adb on my c drive.
Because the screen is showing as black/greyish, I was not able to determine which firmware version it had on it, it could be jellybean or kitkat.
So I decided to download the firmware (XT1039_PEREGRINE_VFEU_5.1_LPBS23.13-17.3-1_cid7_CFC.xml.zip I hope it is the right one) in order to flash the phone from scratch. I extract the firmware to the folder containing mfastboot.exe.
I then connect the phone with the usb cable to my computer, go into boot mode selection using power+volume down for 3 second, then my adb interface shows up under device manager. At this stage I am ready to flash.
Then I issue the following commands:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Everything executes successfully, but when I reboot the phone, I still have the black/greysh screen.
Any ideas? I need help.
Thank you
Best regards
alfred56
Any takers?
Hi everyone, i have a reallly annoying problem after use MBM-CI but, before of explain the problem, i have to say that i flashed my MOTO G XT1032 (41.1A) with Android 4.4.4 GPE Firmware ( GPE_XT1032_KTU84P.M003_CFC.xml ) and it ran very good so i charge the battery until 32% and i tried to upgrade my phone from settings, all was going normal: The phone reset with a black background, the logo of Android and a blue bar with the message of says that my phone is upgrading, please wait; the problem beging when the blue bar was too close of finish and the phone turned off, it not turn on so i hold the Power button and the phone vibratte but nothing happens, i connected it to the PC and try again to turn on but i only can hear the sound of "Device connected", "Device disconnected" from Windows; i search a solution and found this video "REVIVIR MOTO G 2013 SOLUCIÓN FULL BRICK| NO MAS LADRILLO!!!!" from "Valtitec Indrustries" in YouTube (i know, it's in spanish) and use the BlankFlash Tool from the description of that video (i already had the Qualcomm HS-USB QDLoader 9008 Driver installed in my pc), good, it works buuuut... My phone get in the bootloader screen and shows this info:
AP Fastboot Flash Mode (S)
41.1A(*) (sha-80481ae, 2015-04-10 14:30:28)
CPU: MSM8226 CS
eMMC: 8GB Toshiba RV=06 PV=51 TY=17
DRAM: 1024MB Samsung S4 SDRAM DIE=4GB
Battery OK (After use MBM, Battery was LOW)
Device is LOCKED. Status Code: 0
Transfer Mode: USB Connected
Fastboot Reason: Failed to initialize partition table
So, i tried to flash it but after of some tries, i read the part of shows "Device is LOCKED. Status Code: 0", i search in Google and found a lot of forums and tried to solve it, the results are:
SDK Tools: fastboot oem get_unlock_data: (bootloader) Failed to get unlock data, please try again!
Try to flash the phone shows in GPT.bin "(Bootloader) Preflash validation failed", same in motoboot, aditional, motoboot patition not found; in the other files shows that "(Bootloader) Permission Denied", and all the files have failure.
I can Only use "Barcodes" in Bootloader and it shows: IMEI, SKU: 000000....; Date: 01-01-1970, Serial Number: 9fd6f218
I tried to flash my phone with various versions of Android:
RETAIL_XT1032_4.4.4_KXB21.14-L1.61_cid9_CFC.xml
BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml
XT1032_FALCON_RETBR_5.1_LPB23.13-56_cid12_CFC.xml
GPE_5.1_XT1032_LMY47M.M001_CFC.xml
GPE_XT1032_5.1_LMY47M.M005_cid222_CFC.xml
GPE_XT1032_KTU84P.M003_CFC.xml
XT1032_FALCON_TEFCO_5.1_LPBS23.13-56-2_cid12_CFC.xml
XT1032_MOVISTAR-CO-SS_4.4.4_KXB21.14-L1.40-1_1_cid12_CFC_1FF.xml
But no one works; now the MBM tool not works, i reinstall the Qualcomm driver and now shows a error :v, and the tools that i used are:
adt-bundle-windows-x86_64-20131030
MBM (BlankFlash of the video)
Moto Auto Flash Tool v6.6
Riff Box Jtag
ADB Tools (ADB Fastboot Tools)
mfastboot
And the sequences of cmd that i used are:
Code:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Code:
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Code:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash gpt gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2 (I didn't say but if the firmware have 3 or 4 sparsechunks, i put the sequence in front of this)
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot-bootloader
And no one works; ¿what i can do?, i'm poor and not have money for buy a cel phone and neither very cheap phone, only can try to fix this and it's very important for the grupal works of the university :c HELP :crying: