[Q] Can't boot custom rom after flashing in TWRP - Verizon HTC One (M8)

I've never had issues barging into a development community and going out to the horizon of customization until this cellphone. It's been 12 hours of flashing and downloading and flushing and flashing...
I have S-off and unlocked through SunShine
I use the 0P6BIMG.zip to flash RUU back to the stock verizon rom android 4.4.2
I use 3.28.605.4-firmware.zip from the same RUU thread to update the firmware (???)
I want to install CM12 or liquidsmooth ROM, but I'm getting a hunch at this point I need to start with the stock verizon 5.0.1 installed before that because TWRP wants to patch the system file... But then why am I wiping my system before installing?
I also tried flashing FluentRom_v7.5.zip but I got stuck on the HTC initial screen, I don't even make it over to a boot animation.
What do?

Gevork Gevorkyan said:
I've never had issues barging into a development community and going out to the horizon of customization until this cellphone. It's been 12 hours of flashing and downloading and flushing and flashing...
I have S-off and unlocked through SunShine
I use the 0P6BIMG.zip to flash RUU back to the stock verizon rom android 4.4.2
I use 3.28.605.4-firmware.zip from the same RUU thread to update the firmware (???)
I want to install CM12 or liquidsmooth ROM, but I'm getting a hunch at this point I need to start with the stock verizon 5.0.1 installed before that because TWRP wants to patch the system file... But then why am I wiping my system before installing?
I also tried flashing FluentRom_v7.5.zip but I got stuck on the HTC initial screen, I don't even make it over to a boot animation.
What do?
Click to expand...
Click to collapse
I'm prettly sure you're on an older firmware. You need to be on 5.01 to flash the ROMs you have tried to flash. Use the pre-rooted RUU from this thread here: http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473
Also make sure you have the latest version of TWRP.
Edit: The firmware you flashed was 4.4.4

BladeRunner said:
I'm prettly sure you're on an older firmware. You need to be on 5.01 to flash the ROMs you have tried to flash. Use the pre-rooted RUU from this thread here: http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473
Also make sure you have the latest version of TWRP.
Edit: The firmware you flashed was 4.4.4
Click to expand...
Click to collapse
Thanks for the link that thread and your advice was exactly what I needed.
For whatever reason after using the app/exe to flash 5.0.1 stock-rooted, Liquid Rom failed to install in TWRP. I reflashed the stock-rooted rom and CM-12.1 worked flawlessly. So I'm on CM right now :good: but I'll take another look into Liquid rom. Thanks so much!

Since you like AOSP, I recommend visiting the main m8 thread some other Roms. They are unified builds.

Related

[Q] 4.4.4 OTA Update from 4.4.2 rooted and unlocked with Mods

Thank you guys in advance for your help but I just had a few questions. I am running 4.4.2 currently with the stock rom rooted and unlocked bootloader. I have however issued a few Mods such as extreme power saving and built in tether. Can I just load the 4.4.4 firmware and radios, switch back to stock recovery and take the OTA to 4.4.4 without having to wipe anything or since I have used some mods do I now have to wipe my device and put everything back after getting the 4.4.4 update. The reason I ask is I like having the stock features while just using google now launcher on top of sense. Also would any of you have a recommendation on a ROM to achieve this same thing so I dont have to go through this everytime I want to take the newest OTA if it is not possible to take without wiping.
jpgetter said:
Thank you guys in advance for your help but I just had a few questions. I am running 4.4.2 currently with the stock rom rooted and unlocked bootloader. I have however issued a few Mods such as extreme power saving and built in tether. Can I just load the 4.4.4 firmware and radios, switch back to stock recovery and take the OTA to 4.4.4 without having to wipe anything or since I have used some mods do I now have to wipe my device and put everything back after getting the 4.4.4 update. The reason I ask is I like having the stock features while just using google now launcher on top of sense. Also would any of you have a recommendation on a ROM to achieve this same thing so I dont have to go through this everytime I want to take the newest OTA if it is not possible to take without wiping.
Click to expand...
Click to collapse
Flash the ruu here. That will get you to 4.4.3 the easy way and make you 100% stock so you can take the ruu. Then flash twrp and flash su or the rooted Rom of your choosing.
The RUU is one way to go, although I would never update via OTA...
Another would be to flash the firmware and radios from here:
http://forum.xda-developers.com/showthread.php?t=2723159
And then Scott's rooted stock rom from here:
http://forum.xda-developers.com/showthread.php?t=2914922
He usually has them up a few hours after a new OTA has been released. Even better - try his stock, debloated CleanROM once it's out.
This way you can keep your recovery. You can even try to just flash the 4.4.4 firmware and radios and see if it runs your current 4.2 ROM ok. But I would not update the rom from version to version without a wipe.
The setup is the price to pay for getting a new and hopefully better Android version.

[Q] How to update HTC One M8 Vzw hboot 3.16 to current?

I am attempting to update my hboot from 3.16 to the current (which I think is 3.19) and I am just not having any luck finding what I need to do. I'm not new to Android at all, just HTC. Is there a firmware.zip that can be used for this in fastboot?
I am trying to update to the newest TWRP so I can flash CM12. I did get TWRP 2.8.x.x flashed but was stuck at the rebooting into recovery screen. Rolled back to 2.7.0.2 for now.
http://forum.xda-developers.com/att-htc-one-m8/help/cm12-htc-one-m8-hboot-3-16-t2986339 I found this thread for the AT&T version, but I know the VZW is a little different. Is there a developer edition for VZW?
MacFett said:
I am attempting to update my hboot from 3.16 to the current (which I think is 3.19) and I am just not having any luck finding what I need to do. I'm not new to Android at all, just HTC. Is there a firmware.zip that can be used for this in fastboot?
I am trying to update to the newest TWRP so I can flash CM12. I did get TWRP 2.8.x.x flashed but was stuck at the rebooting into recovery screen. Rolled back to 2.7.0.2 for now.
http://forum.xda-developers.com/att-htc-one-m8/help/cm12-htc-one-m8-hboot-3-16-t2986339 I found this thread for the AT&T version, but I know the VZW is a little different. Is there a developer edition for VZW?
Click to expand...
Click to collapse
Start here.
http://forum.xda-developers.com/showthread.php?t=2946473
VZW M8 Master RUU/Firmware Collection
Got it updated via your .exe thanks.
Could I update the hboot without having to install a new ROM? Im on OSX so i cant use the exe file.
cBreezy22 said:
Could I update the hboot without having to install a new ROM? Im on OSX so i cant use the exe file.
Click to expand...
Click to collapse
Yes you can. You can use fastboot to flash the 4.4.4 firmware I have posted which would update everything you need to be all up to date with no need to update ROM if you choose not too.
Thank You! Updating htboot solved all the issues I was having. (5mins boot + stuck in recovery boot with latest twrp)
It would appear in my fixing of the hboot I have broken my GPS again. Finally got it working on the ruu, but nothing in cm11.
A factory reset in the stock ROM with stock recovery wipes additional partitions that are vital to GPS. I would try that if wiping is a possibility.
I reinstalled the ruu then wiped and installed cm11 and it is working. Running cm12 now.

Error executing updater binary in zip

I get this message when I try to flash the new CM12 snapshot on my HTC One M8, SlimROM 4.4.4, with TWRP v.2.8.1.0. When I tried it, I actually had to use an RUU on my phone to get it working again. How do I fix this (not the broken phone, I fixed that).
I've looked into similar threads, and one says I need to update my TWRP, but I can't, because anything above TWRP 2.8.1 doesn't work on KitKat 4.4.4, and I have no idea how I would update my phone past that, since that's what I'm trying to do...
darthnix said:
... anything above TWRP 2.8.1 doesn't work on KitKat 4.4.4, and I have no idea how I would update my phone past that, since that's what I'm trying to do...
Click to expand...
Click to collapse
I'm not so sure this is true. IF there's a point at which twrp is too new to flash a kit Kat Rom then you probably don't have to go back much further than 2.6 or so. If you're looking to get to a newer Rom then I would greatly recommend flashing the 5.0.1 ruu from dottat (to make sure you're on the latest official firmware) and then flashing the latest twrp followed by any one of the great lollipop roms out there.

Unroot and update to Lollipop without stock recovery

Hello,
I have a rooted Verizon HTC One M8 running on Android 4.4.2. I do not have the stock recovery and for some reason I am unable to flash CWM, so I am stuck with TWRP. I keep receiving notifications that Lollipop is available to install, but it fails each time I try to install it because I am rooted. How can I unroot and get back to my stock ROM so that I can install the update?
No need to update via OTA. Just follow the instructions here and you'll be on rooted 5.0.1 stock
http://forum.xda-developers.com/ver...u-m8vzw-5-0-1-s-off-onlynewest-t3047103/page3
Questions
Thank you for the reply. Are you 100% sure this is compatible/will work with my phone? If I flash the ROM and it doesn't work, can I simply flash a backup image I made to recover? And when I flash the ROM, will I lose all the data on my phone? Also, where may I download my stock recovery? I searched all over the internet and couldn't find one for the Verizon version of the HTC One M8.
Thank you
That RUU is a complete stock firmware package, including the recovery. Read the OP.
But if you're just looking for the stock recovery you can find it here: http://forum.xda-developers.com/showthread.php?p=52017763
That alone won't let you take the OTA though. If you modified your stock rom the OTA will fail.
You can find a complete stock rom elsewhere here on XDA, but why the trouble if you have it all in one neat package with the RUU?
Thank you very much for the help and useful information.
Sorry to bother you with all the questions but I have one more. How do I make a backup of my stock recovery? Say I went out and bought a new phone, how would I backup that stock recovery?
Image Update Error
Error fixed now

Custom Rom or The official Marshmallow update?

Anyone can suggest what upgrade I should choose and which one is more stable? I want to root my phone as well so if anyone with the official Marshmallow update can give me a good reason to upgrade from 5.0.2 I'd really appreciate it.
Besides sense 7 is there anything else to look forward to in Marshmallow for HTC?
Also anyone with the Marshmallow GPE Rom or Viper M8 please share your experiences with the roms.
For the first time I'm having trouble deciding what to flash on my E8 thanks to all the devs!
I tried everything, and - offical 6.0.1 is better choise. There is best camera. They really updated drivers or libs, i don't know. Stock ROM + custom kernel it's always good. All custom ROM's here is based on older firmwares.
Jestercore said:
I tried everything, and - offical 6.0.1 is better choise. There is best camera. They really updated drivers or libs, i don't know. Stock ROM + custom kernel it's always good. All custom ROM's here is based on older firmwares.
Click to expand...
Click to collapse
How did you Root and get the custom kernel (without the system write protection) on Marshmallow? Same as how you'd do it on 5.0.x?
Yes, my 6.0.1 rooted, but custom kernel not exist this time. We waiting.
Jestercore said:
Yes, my 6.0.1 rooted, but custom kernel not exist this time. We waiting.
Click to expand...
Click to collapse
Would you please explain how to root your E8 6.0.1? I prefer to get just root without installing custom recovery, so I can backup stock recovery using flashify just in case for future OTA.
i dont know about way like this. In future u can extract stock recovery from OTA package, that u gonna receive. This always works.
I've flashed supersu 2.67 via recovery.
Jestercore said:
i dont know about way like this. In future u can extract stock recovery from OTA package, that u gonna receive. This always works.
I've flashed supersu 2.67 via recovery.
Click to expand...
Click to collapse
I received OTA and installed it directly. I forgot to backup the OTA file first so I don't have a chance anymore to extract the stock recovery. I tried to downgrade to 5.02 but always failed.
wildanw2 said:
I received OTA and installed it directly. I forgot to backup the OTA file first so I don't have a chance anymore to extract the stock recovery. I tried to downgrade to 5.02 but always failed.
Click to expand...
Click to collapse
don't worry, u can use future OTA's recovery to install the same OTA
Downgrading is easy. You need to flash TWRP recovery via fastboot. Do not need full root. ERASE everying. The flash lollipop RUU via external SD.
parthasd said:
Downgrading is easy. You need to flash TWRP recovery via fastboot. Do not need full root. ERASE everying. The flash lollipop RUU via external SD.
Click to expand...
Click to collapse
I have M8SW and it is S-ON, it currently running BinDroid ONE V1.3.0 Android 4.4.4. I'm thinking about trying marshmallow ROM but I've read that is hard to downgrade to Kitkat once the firmware has been upgraded to higher version. But you said above it is easy to downgrade, can you please provide me with the steps to downgrade from marshmallow to kitkat rom. Thanks

Categories

Resources