If I use T-Mobile in the US, and buy a G920F or G920i, could I flash the T-Mobile rom to the device via Odin in order to use T-Mobile wifi calling? Or is it not possible to flash T-Mobile rom to G920F/i via Odin?
phositadc said:
If I use T-Mobile in the US, and buy a G920F or G920i, could I flash the T-Mobile rom to the device via Odin in order to use T-Mobile wifi calling? Or is it not possible to flash T-Mobile rom to G920F/i via Odin?
Click to expand...
Click to collapse
The Rom should allow WiFi calling with some minimal Porting. Never never never flash incorrect firmware so Odin is a no go In this instance.
Yes and no!
phositadc said:
If I use T-Mobile in the US, and buy a G920F or G920i, could I flash the T-Mobile rom to the device via Odin in order to use T-Mobile wifi calling? Or is it not possible to flash T-Mobile rom to G920F/i via Odin?
Click to expand...
Click to collapse
Don't use Odin! But it's possible, this way: get TWRP recovery on your int'l S6, create a nandroid backup for safety, flash a tmo S6 custom ROM that allows wifi calling, flash your own int'l S6's kernel, then reboot. It should work. No guarantee, and it's untested by me. Good luck, though!
Hey guys. Just wondering what ever happen with that. I was wondering the same. But I also wanted to know if that wild enable the video calling feature and enhanced message? Thanks
Related
I'm not as concerned about this for ROM flashing. I'm wanting to find out if my G920T can use G920I or G920F modems/bootloaders, etc.
Here's my deal. I have a T-Mobile G920T. To unlock this phone I need to get away from the G920T modem. I previously had a G920T1 (MetroPCS) firmware set installed and it worked great, but the rom sucked.
I've since restored back to stock G920T and i've rooted/twrp, but I see other ROM's and I'd like to give them a shot. The catch - they all say I need to have the newest OI7 firmware installed. I'm still on the G920T sim locked OH8. The only OI7 modems/bootloaders I can find are for the G920F variant. I can't find OI7 for the G920T1 variant. I don't know if the G920F variant will sim unlock my phone. I don't want to brick my phone to figure that out, so this is the reason why I posted this question. I can flash ROM's all day long, but if I can't use my Cricket sim when I'm out in BFE then the ROM is pointless.
Does anyone understand what I'm asking?
joesee said:
I'm not as concerned about this for ROM flashing. I'm wanting to find out if my G920T can use G920I or G920F modems/bootloaders, etc.
Here's my deal. I have a T-Mobile G920T. To unlock this phone I need to get away from the G920T modem. I previously had a G920T1 (MetroPCS) firmware set installed and it worked great, but the rom sucked.
I've since restored back to stock G920T and i've rooted/twrp, but I see other ROM's and I'd like to give them a shot. The catch - they all say I need to have the newest OI7 firmware installed. I'm still on the G920T sim locked OH8. The only OI7 modems/bootloaders I can find are for the G920F variant. I can't find OI7 for the G920T1 variant. I don't know if the G920F variant will sim unlock my phone. I don't want to brick my phone to figure that out, so this is the reason why I posted this question. I can flash ROM's all day long, but if I can't use my Cricket sim when I'm out in BFE then the ROM is pointless.
Does anyone understand what I'm asking?
Click to expand...
Click to collapse
DO NOT flash any FIrmewares through odin if its isn't your model number, if you purchased your phone and don't have an EIP you could sim unlock with the app, so any rom your on unless its not Touch wiz based (aren't any available besides touchwiz)
I'm thinking about getting a 920i phone for use on T-mobile and was wondering if it would be possible to flash 920T rom on it so I could obtain WiFi calling? (I'm assuming the stock 920i rom does not support WiFi calling.) Also, I would like to be able to use Samsung pay so therefore this would have to be done without tripping the Knox counter.
You'll brick you device
I'm curious to know why this would cause a brick
deltacity said:
I'm curious to know why this would cause a brick
Click to expand...
Click to collapse
Can you wear yours sister jeans ? No you cannot. Different rom flashing in deferent mobile will brick because of different botloader modem cache partition etc ... Also to get better explanation use google for mor detailed answer
Well the only thing that would be different would be the modem and bootloader possibly (since both are Samsung Galaxy S6's) . I'll just have to hope maybe wifi calling will work on the 920i
deltacity said:
Well the only thing that would be different would be the modem and bootloader possibly (since both are Samsung Galaxy S6's) . I'll just have to hope maybe wifi calling will work on the 920i
Click to expand...
Click to collapse
Did it work?
Hi All, I want to continue using my AT&T prepaid plan but I recently bought a locked T-Mobile Galaxy S7 SM-G930T (I'm going to try to unlock it - if that doesn't work this is all moot). I would like to flash AT&T firmware so I can use the AT&T LTE bands. Can I follow the instructions in the link below once I've unlocked a T-Mobile SM-G930T and turn it into a SM-G930A?
http://www.droidviews.com/nougat-firmware-on-att-galaxy-s7s7-edge-sm-g930a-g935a/
I've read the link below... but it seems to be only if you want to continue using T-Mobile service which I don't.
https://forum.xda-developers.com/tm...w-to-flash-att-nougat-to-t-mobile-s7-t3553610
Changing firmware doesn't have anything to do with what bands the hardware supports. Unlock it and throw the ATT SIM in. Only difference is carrier supported features and software (wifi calling, etc). Flashing ATT modem might improve coverage but all S7 support the same bands.
Thanks buddy for the reply. I'm used to using a custom ROM on my Android phones so this is new. Mostly CyanogenMod.
That's good to know I don't need to flash in order to get the bands but I understand I need to if I want OTA updates from at&t. It seems relatively simple that you just flash the AT&T ROM over the T-Mobile with Odin and then use some update file. It doesn't even effect Samsung pay and Knox which is great.
Stupid question: is the AT&T modem included with the AT&T rom? Also, with regards to the 2nd link in the OP what is the update file that you put on the sdcard to use in recovery - is that an OTA update because your ROM is different from your carrier?
madadhd said:
Thanks buddy for the reply. I'm used to using a custom ROM on my Android phones so this is new. Mostly CyanogenMod.
That's good to know I don't need to flash in order to get the bands but I understand I need to if I want OTA updates from at&t. It seems relatively simple that you just flash the AT&T ROM over the T-Mobile with Odin and then use some update file. It doesn't even effect Samsung pay and Knox which is great.
Stupid question: is the AT&T modem included with the AT&T rom? Also, with regards to the 2nd link in the OP what is the update file that you put on the sdcard to use in recovery - is that an OTA update because your ROM is different from your carrier?
Click to expand...
Click to collapse
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
i have METROPCS Phone SM-G930T1 Nougat, already unlocked since i live in mexico...is there a international rom to flash?? i wanna convert my s7 to a non carrier rom IN ADVANCE THANKS 4 YOUR HELP!
muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
I don't get why you would do this other than to have ATT bloat over TMO bloat (IMHO TMO has less bloat than ATT). There's no technical advantage. Am I missing something?
A0425A said:
I don't get why you would do this other than to have ATT bloat over TMO bloat (IMHO TMO has less bloat than ATT). There's no technical advantage. Am I missing something?
Click to expand...
Click to collapse
The amount of bloatware is irrelevant since you can freeze all bloatware on either build. I experienced many issues on the TMo version including issues with Android Auto, Google Assistant, and Tasker. I thought these apps were buggy but all of those issues were resolved on the AT&T version. The AT&T version seems to be a better, bug-free build.
muniz_ri said:
The amount of bloatware is irrelevant since you can freeze all bloatware on either build. I experienced many issues on the TMo version including issues with Android Auto, Google Assistant, and Tasker. I thought these apps were buggy but all of those issues were resolved on the AT&T version. The AT&T version seems to be a better, bug-free build.
Click to expand...
Click to collapse
Read that in a different thread you posted to after I responded. I think it's very YMMV though. But if you saw improvement then ??
Hi, did anyone ever complete this flash from SM-G930T to SM-G930A? I'd like to do this solely to try and get the wifi calling feature since my workplace has poor cell service but great wifi. I bought the T-Mobile phone, unlocked it, put the ATT sim in and everything but wifi calling works fine. I appreciate the reply!
This is much later in the year (11-8-2021) and ATT has posted the list of phone they say will work and it only shows G930A. It seems their test of working means it must have been sold by ATT. They say My G930T won't work. So Will ATT continue to use customer's unlocked phones it they were not orginally sold by ATT. They have the records. Will ATT refuse to use one of their SIMs even if the phone is Flashed to ATT logo. I do not want to throw away my G930T phone.
muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
Hello and thank you. You posted this information and link back in 2017 and so much has changed. Mostly ATT is now working hard to get rid of all 3G towers and firing up 5G. They said my Galaxy S7-GM930T would not work so I think they link you posted will help me convert the phone back to a GM930A or U or U1. My question is,..Has anything in your post changed since 2017 and if so could you please advise me of what I need to do. Thanks very much.
trigger1937 said:
Hello and thank you. You posted this information and link back in 2017 and so much has changed. Mostly ATT is now working hard to get rid of all 3G towers and firing up 5G. They said my Galaxy S7-GM930T would not work so I think they link you posted will help me convert the phone back to a GM930A or U or U1. My question is,..Has anything in your post changed since 2017 and if so could you please advise me of what I need to do. Thanks very much.
Click to expand...
Click to collapse
They sent you a message saying the phone won't work?
Only need WiFi. Has anyone else tried this with success?
Anyone?
I think you just need to flash the kernel for this phone after the rom for the right version of Android. The Sickness has a custom one.
tdunham said:
I think you just need to flash the kernel for this phone after the rom for the right version of Android. The Sickness has a custom one.
Click to expand...
Click to collapse
Thank you Troy. I thought as much, but I'm having trouble getting any of the port roms to boot, but this is how I remember doing it before. I'm thinking it's a kernel issue anyway. No big deal.
I have sprint N920P. But there are some problems,
1. no hotspot available
2. some network activation crap when turn on phone
I want to convert it to N920G. How can I do that ? (If possible).
I have another question, If I do something wrong and at the end, flash N920P stock rom, will my phone carrier locked? I don't know how this network unlocking works. Is it on device software or on network side. ?
Thanks
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
joe3681 said:
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
Click to expand...
Click to collapse
you donnt need to remove the .md5
you will need modded odin though.
mweinbach said:
you donnt need to remove the .md5
you will need modded odin though.
Click to expand...
Click to collapse
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Thanks Joe I was tired of returning all the way back to the beginning and getting all those new updates on my unlocked S8
joe3681 said:
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Click to expand...
Click to collapse
Yeah and on a Mac you do need to, or it freezes Odin completely
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
this.guy.lol said:
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
Click to expand...
Click to collapse
No, it will not unlock the phone (Note: Verizon phones are factory unlocked and remain that way after a firmware flash)
Yes, you can flash any carriers FW to a US S8 and use it with a different carrier.
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Deleted
this.guy.lol said:
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Click to expand...
Click to collapse
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
joe3681 said:
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
Click to expand...
Click to collapse
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
this.guy.lol said:
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
Click to expand...
Click to collapse
I had a TMobile S7 edge and flashing unlocked firmware never unlocked the device. That's handled by TMobile servers so...
Flashing unlocked firmware will give you just that. The smoother, bloat free firmware from another device but not the actual sim unlock.
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
maquino1985 said:
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
Click to expand...
Click to collapse
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
twizt3d said:
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
Click to expand...
Click to collapse
Thanks. Some threads made it sound possible but inconclusive. I'll just assume it doesn't work.
BTW, can you link to the att oreo fw? And what do u flash that with Odin or comsey?
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
twizt3d said:
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
Click to expand...
Click to collapse
Ok thanks. I need to flash anyways because I'm having terrible battery issues and just debating whether to go to a newer version of 950u or back to U1 and losing WiFi calling. In your opinion is oreo beta worth it
So just to confirm, I have read everything, but I am just a bit confused. If I flashed the unlocked firmware via modified odin on a locked AT&T S8 it will remove a lot of the carrier bloat and give my my wifi hotspot back, but remove wifi calling. Similar to when I flashed the T-Mobile firmware on my AT&T S7 and got rid of a ton of the AT&T bloatware but was able to activate my wifi hotspot but lost wifi calling. I stay locked to AT&T which is fine that is not my purpose for flashing
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
and can you re-upload the link is dead now
The links don't work. Any chance you've still got the firmware? I've been overseas since october. I have an unlocked AT&T phone that I intend to keep using when I get back, so I want to keep it AT&T FW.
Hi.
I have a G955U Galaxy S8+ AT&T Factory Unlocked on Android 7.0
Baseband Version: G955USQU1AQD9
Android Security Patch Level - April 1, 2017
I no longer live in the US, and currently in the Philippines. Phone works great and the signal is too and all, but I cannot get OTA updates.
Can I just download the firmware file in this thread and flash straight through ODIN, or do I need to follow another guide?