Whatever car app I am using on my S6 it will open BT but not autoconnect to my htc stereoclip bt receiver in my car. I have unpaired and re-paired many timed. The only solution is to shutdown the bt receiver and restart it, why is the S6 not connecting by itself when the app ask it to?
Sent from my precious
So very annoying. There's an app called bt auto connect, try that. It only worked for me occasionally, but maybe you'll have better luck
Galaxy S6 (Verizon)
sd0070 said:
So very annoying. There's an app called bt auto connect, try that. It only worked for me occasionally, but maybe you'll have better luck
Galaxy S6 (Verizon)
Click to expand...
Click to collapse
Tried it but nothing changed, the only way to for my S6 to connect is doing it manually or to turn off-on my BT receiver everytime.
I ordered NFC tags but I wished there is a fix.
It looks like samsung TW is forbidding auto-connect for a weird reason
Related
Solved - Finally following setup works for me
No ICS Roms worked for me, but following ROM is working perfectly. I have tried for a day and no issue. As soon as I start my car bluetooth connected and BOTH Phone and Media Profiles remain connected. Audio Track information displays perfectly!!
XDA Thread: http://forum.xda-developers.com/showthread.php?t=1621679
ROM: Skyrocket CM9 RC 2: cm-9.0.0-RC2-skyrocket.zip
Radio: Radio for AT&T and Rogers: Radio_RIL__I727UCLE2.zip
Bluetooth Device: Car Honda CRV 2012
Background:
1) I have two bluetooth devices that I use with my phone. Blueant Q2 bluetooth headset and Bluetooth enabled car audio system in Honda CRV (factory not after market)
Note: This works fine in all GB ROMS
Behavior
1) Bluetooth is different in GB and ICS. Go to Settings => Bluetooth and look at Paired Devices.
- In ICS you will see a Settings wheel next to Device Name. Click on that and you can see "Phone" and "Media" Profiles.
- GB does not have these profiles separate.
See attached image for the state of Phone and Media profiles after I start my car.
2) Bluetooth "Phone" Profile does not auto-connect. "Media" Profile auto connects and works fine. I need to go to Bluetooth => Settings => Click on wheel next to Device Name => Check the checkbox next to "Phone" profile everytime to connect the phone and send-recieve calls using Bluetooth.
3) Steps to duplicate the issue
I see bluetooth icon seeing it connect
Few seconds later I see message "Samsung SGS ..... has been disconnected"
At this time "Media" is connected and "Phone" profile is not. In Honda it shows that Phone is disconnected (even though "Media" is connected and Music plays fine
Finally If I try to connect to Phone via Honda it always fails. But if I open Bluetooth settings and select "Phone" profile it connects and remains connected.
More Information
My guess it that in GB there were no separate "Phone" and "Media" profiles. Phone would just connect to car or headset via BT and stay connected. With ICS the phone is initiating two processes. First Phone profile connects and within few seconds when Media profiles tries to connect. This somehow throws off my Car and my BlueAnt Q2 BT and it drop the BT Phone profile connection
http://developer.android.com/about/versions/android-4.0.3.html
Bluetooth
New public methods fetchUuidsWithSdp() and getUuids() let apps determine the features (UUIDs) supported by a remote device. In the case of fetchUuidsWithSdp(), the system performs a service discovery on the remote device to get the UUIDs supported, then broadcasts the result in an ACTION_UUID intent.
Click to expand...
Click to collapse
I have the EXACT same issues with my 2012 Honda CRV (Non nav). (well, I’m working on this on behalf of a friend, so their car)I hooked it up to another my car with a Pioneer Avic X920bt head unit, and it was doing the same thing. I then did a firmware upgrade and initialization through KIES and now my Avic loads up, but the Honda is doing the same thing still. Although, before I did the wipe the Honda would disconnect and reconnect randomly and it would take forever for the phone profile to connect and it looked like the bluetooth would turn on and off and “freak out”. So far it seems stable, but I have yet to have much time with it.
qitupx said:
I have the EXACT same issues with my 2012 Honda CRV (Non nav). (well, I’m working on this on behalf of a friend, so their car)I hooked it up to another my car with a Pioneer Avic X920bt head unit, and it was doing the same thing. I then did a firmware upgrade and initialization through KIES and now my Avic loads up, but the Honda is doing the same thing still. Although, before I did the wipe the Honda would disconnect and reconnect randomly and it would take forever for the phone profile to connect and it looked like the bluetooth would turn on and off and “freak out”. So far it seems stable, but I have yet to have much time with it.
Click to expand...
Click to collapse
I have 2012 CRV as well. Looks like Bluetooth has changed for ics and some devices don't like it
Sent from my SAMSUNG-SGH-I727 using xda premium
cnewsgrp said:
I have 2012 CRV as well. Looks like Bluetooth has changed for ics and some devices don't like it
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I have a Galaxy Nexus with 4.0.4 that worked perfectly fine. Both profiles reconnect upon turning a car on and off. I wonder if Honda is detecting the kind of phone and sending the way to connect based on that and not by what OS version it is. Just a complete guess. Also, I tried with a T mobile Galaxy S II and the same thing occurs on it's ICS update.
qitupx said:
I have a Galaxy Nexus with 4.0.4 that worked perfectly fine. Both profiles reconnect upon turning a car on and off. I wonder if Honda is detecting the kind of phone and sending the way to connect based on that and not by what OS version it is. Just a complete guess. Also, I tried with a T mobile Galaxy S II and the same thing occurs on it's ICS update.
Click to expand...
Click to collapse
Thanks. Do you mean to say that everything works with T mobile Galaxy S II or you see same issue I am experiencing with it?
Here is what I see with Honda after I sit in the car and turn on the car.
I see bluetooth icon seeing it connect
Few seconds later I see message "Samsung SGS ..... has been disconnected"
At this time "Media" is connected and "Phone" profile is not. In Honda it shows that Phone is disconnected (even though "Media" is connected and Music plays fine
Finally If I try to connect to Phone via Honda it always fails. But if I open Bluetooth settings and select "Phone" profile it connects and remains connected.
My guess it that this is happening. In GB there were no separate "Phone" and "Media" profiles. Phone would just connect to car or headset via BT and stay connected. With ICS the phone is initiating two processes. First Phone profile connects and within few seconds when Media profiles tries to connect. This somehow throws off my Car and my BlueAnt Q2 BT and it drop the BT Phone profile connection
cnewsgrp said:
Thanks. Do you mean to say that everything works with T mobile Galaxy S II or you see same issue I am experiencing with it?
Here is what I see with Honda after I sit in the car and turn on the car.
I see bluetooth icon seeing it connect
Few seconds later I see message "Samsung SGS ..... has been disconnected"
At this time "Media" is connected and "Phone" profile is not. In Honda it shows that Phone is disconnected (even though "Media" is connected and Music plays fine
Finally If I try to connect to Phone via Honda it always fails. But if I open Bluetooth settings and select "Phone" profile it connects and remains connected.
My guess it that this is happening. In GB there were no separate "Phone" and "Media" profiles. Phone would just connect to car or headset via BT and stay connected. With ICS the phone is initiating two processes. First Phone profile connects and within few seconds when Media profiles tries to connect. This somehow throws off my Car and my BlueAnt Q2 BT and it drop the BT Phone profile connection
Click to expand...
Click to collapse
Sorry, T-mobile Galaxy S II does same thing as the Skyrocket. Yup, same thing..honda says connection failed when trying to connect through the car. I sent Honda an email and all I got was a generic responce about turning your wifi off and repairing.
Same behavior with Infiniti G37S
I have the same behavior of my AT&T Skyrocket with SKY-ICS 4.2F6-2.1 and 2011 Infiniti G37S. It is driving me nuts that I have to manually reconnect Bluetooth every time. Furthermore, it tends to disconnect Bluetooth randomly and I have to reconnect it again.
Pasha
It would be great if one of the dev can find a way to install GB Bluetooth files on ICS. GB worked perfectly for me.
A Google search shows a lot of people have the exact same problem. It might be safe to say that this is a known problem and hopefully it will be resolved soon..
Sent from my SAMSUNG-SGH-I727 using xda premium
I have the same problem with my Clarion deck. But only when I use a custom kernel. Works fine with a stock rogers one
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
waiters said:
A Google search shows a lot of people have the exact same problem. It might be safe to say that this is a known problem and hopefully it will be resolved soon..
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I have more confidence in our dev's fixing this or finding a work around. It might be as easy as replacing ICS BT libraries with GB ones. However I am unable to get their attention.
I have the same issue but with a Dice Mediabridge installed in my BMW. Works for about 10 min then drops, will reconnect with a reboot. My Jawbone Icon stays connected and works fine, but that just had a recent firmware update. I hope this is resolved soon.
Finally a ICS Rom that works for me - see OP
So, what is so different in that ROM? How can the 'fix' from that ROM be applied onto other ROMs?
Pasha
PashaF said:
So, what is so different in that ROM? How can the 'fix' from that ROM be applied onto other ROMs?
Pasha
Click to expand...
Click to collapse
CM9 is pure google. No junk from AT&T
Works on CM9
It works perfectly on CM9 builds - I'd hope other ROMs can be modified as well...
cnewsgrp said:
CM9 is pure google. No junk from AT&T
Click to expand...
Click to collapse
PashaF said:
It works perfectly on CM9 builds - I'd hope other ROMs can be modified as well...
Click to expand...
Click to collapse
It works for some time like a week and them boom same problem.
I am on FORD EDGE, rogers.
BUMP: Still have issue
The last poster says issue comes back even running ROM. I have been dealing with this most annoying issue and still have it. I noticed when i uninstall Pandora app, its goes away. Seems to be a bug in the bluetooth stack and Pandora. Were you guys running Pandora at the time? Seems weird this thread just died with no resolution. Anybody care to explain to me what the fix is if any? does this problem follow the Galaxy S4? I am using an LG HBS-700 earpiece but it did the same thing on my Plantronics. is there a Jellybean available for this version? if so, ATT has not released it for over the air. Thanks.
Its not ota you have to use kies software and his thread is almost a year old
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
holeindalip said:
Its not ota you have to use kies software and his thread is almost a year old
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your suggestion, it was actually helpful but as far as the comment about the age of thread.. if someone is suffering from the exact problem i dont think it matters much.
So, I wanted to let anyone else struggling with this bluetooth issue what worked for me. I downloaded and installed Samsung KIES software on my PC as suggested above, performed a full backup of phone and made sure it was fully charged. Now, there will be an upgrade to JellyBean from within KIES. UPGRADE! after upgrade perform a restore and most all your stuff comes back.
** A few of my games/apps installed on my SD Card kept uninstalling itself. this is a bug in JB. Go to Settings, APPS, and move the app to your phone memory and that fixes it. **
Other than that, i have been running the update for a couple of weeks without all the annoying bluetooth issues and its like having a new phone!!! LOVE THE UPDATE.
Only issue is i have more battery drain than before. i have read that installing Jellybean clean install fixed that but will have to research how to do that. Good luck.. hope this helps someone else.
P.S. this is update is NOT available over the air, so dont look for it from your phone. only the KIES software gets you this update.
I dont know if this is specific to Android Auto or just my pioneer 4100nex, but it seems when i connect or disconnect the phone to android auto the S2 disconnects and does not reconnect until i go to the screen below and turn it on.
Im trying hard to like this watch, but this is frustrating.
I have the exact same issue!!!
Sent from my SM-N920T using Tapatalk
This does not happen to my Gear S2. I have Android Auto through my 2015 Sonata.
Sent from my SM-G925P using Tapatalk
When using my carkit( 13 Chevy VOLT with MYLINK) I have to turn Bluetooth off on the watch or else I can not connect to my carkit. After it connects I can turn the watch Bluetooth back on and they work fine.
It is like the Gear S2 is taking priority and not allowing me to connect to another Bluetooth device that isn't just A2DP
I do have a Gear S2 3G
I have similar issue Note 4 and Gear S using 4000NEX. when phone detects android auto it kicks my Gear S out. I think it's a safety thing but it does not reconnect even when android auto is complete. The only work around i have set is to have a rule in Automatelt "free app" that will launch gear manager app when the Gear is is disconnected from the Bluetooth. This way it reminds me to reconnect to my watch or else the Gear S stays disconnected. It is annoying, hoping for a better workaround or a fix.
Arghhh just swapped to a Kuga with SYNC 3 and my Gear S3 has the same issue, it just kicks it out and you later realise and manually reconnect.
Reading this the idea for safety makes sense but reading Android forums it should not happen on Google Wear so ...
Sent from my SM-G935F using XDA-Developers mobile app
Same thing. Brand new Chevy Silverado...my link...android auto...gear s2 and samsung note 3. Everytime I get in the truck, android auto disconnects my watch. From my phone, I don't see dates for these posts. (For me 12-26-2016) Hopefully these are recent issues and a fix will show up in an update???
Just adding to the list. Same issue.
I have a Gear S2 classic, Pioneer 4100NEX and Note5. My Gear will usually disconnect with I plug up to the head unit for Android Auto and will not automatically reconnect later. I always have to manually connect to the Gear in the app on the phone.
I have Gear S2 3G, and it disconnects me as well. 2017 Elantra. Only problem is, with the 3G, phone is on, and it tries to forward calls and screws up. So i have missed calls.
Just got a gear s3 frontier and same trouble. Open the android auto app while not connected to your vehicle. Go to settings, check the switch for use bluetooth. Seems to have solved my issue. Not sure why this is defaulted off.
Sent from my SAMSUNG-SM-G935A using Tapatalk
I've got my brand new Galaxy S7, go to use my Torque app for my truck, and I can't see my ELM327 OBDii dongle... Any fix for this?? I've disabled the auto bluetooth feature in Pandora that Torque said could cause issues... My S5 connected just fine.
Gonna bump this since I couldn't even find it when scrolling through pages.......
Can't help, but I'm stuck in the same situation...
I can see my ELM327, but I cant connect, my phone keeps telling my password is wrong
Running the AT&T Variant and though audio and controls work fine in my car once paired the phone is not pairing upon seeing my car stereo.
My LG V10 worked flawlessly in this regard, usually withing 10 seconds of starting the car.
I've tried bluetooth auto connect and tasker but they only work if I toggle bluetooth while the car is on.
If I toggle bluetooth without either of those installed I just get the pop up showing there is a device available and it has about a 30% success rate at connecting.
There is also an issue every few times where even if it connects the skip buttons do not work and no track title is displayed.
It won't connect to my BMW at all!!! What a holy crap.
prfraczek said:
It won't connect to my BMW at all!!! What a holy crap.
Click to expand...
Click to collapse
I tried Samsung Music and Play Music. I verified Media Audio under BT was enabled. Mercedes Benz 45 AMG.
I have a Toyota and it connects flawlessly, T-Mobile variant. I can even go to the car while it's in the garage and leave my phone in the house and it's still connected to the car.
Strange, mine connects instantly (Ford Falcon - Aussie car).
Mine will connect with my car (Kenwood unit) flawlessly. I have to fiddle with it in my other car (Jeep with UConnect), while the wife's S7 works with both.
I've yet to figure out how to get it to auto open Pandora or anything when it connects. My Note 4 and LG V20 both did this seamlessly
Appears to be a "known" issue with S8 - see this thread : https://us.community.samsung.com/t5...id/GS8QA/highlight/false/page/1/thread-id/299
jennyjane111 said:
maybe you need to connect again
Click to expand...
Click to collapse
I've tried so many times. even reset cache, Bluetooth cache etc. It adding and then disappearing from both- car and phone. I think it is got something to do with contact sharing but this box never pop out.
I had this problem with the S6 and my HTC Stereoclip (BT to AUX adapter for cars), I had to manually pair it every-time and it was one of the reason why I came back to HTC, now I got the S8 and apparently it's the same problem.
Some BT devices auto-connect but not others
I have a problem with phone audio connection when using my car, Gear S3 by default set to answer calls, also my car bluetooth sets to accept calls when it's on.
Problem is when I get into my car, Gear S3 still connected as phone audio connection and my car cant connect to phone audio.
Is there a way to set priority for bluetooth connections that when I am in my car turns off Gear audio connection and turn it back on when I am not in car?
Or is there any other solution to solve this issue?
Thanks
Model name and Firmware Version could help to understand more...
SM-R760?
or
SM-R770
or
SM-R765?
Firmware version you can check for instance via this Code:
Code:
*#1234#
Maybe you know... Software differences could mean also differences in features and BUGs...
Best Regards
adfree said:
Model name and Firmware Version could help to understand more...
SM-R760?
or
SM-R770
or
SM-R765?
Firmware version you can check for instance via this Code:
Code:
*#1234#
Maybe you know... Software differences could mean also differences in features and BUGs...
Best Regards
Click to expand...
Click to collapse
It's R760
That is strange. I have a note 4, both gear and car head-unit connect to it by bluetooth. My phone audio connects only to the device that answers the call.
gpmg762 said:
That is strange. I have a note 4, both gear and car head-unit connect to it by bluetooth. My phone audio connects only to the device that answers the call.
Click to expand...
Click to collapse
Maybe it's because I am using non-Samsung device?
Do you enable phone audio for your watch bluetooth settings?
Watch is connected for phone audio at the phone's Bluetooth setting.
gpmg762 said:
Watch is connected for phone audio at the phone's Bluetooth setting.
Click to expand...
Click to collapse
So both your car bluetooth and watch bluetooth have phone audio option enabled and both of them connect to Gear at same time?
How do you answer calls then?
Both car and s3 are connected to the phone so either one can answer a call.
gpmg762 said:
Both car and s3 are connected to the phone so either one can answer a call.
Click to expand...
Click to collapse
And the audio is routed to the answering device. It would be nice to be able to answer the phone with a swipe on the watch and have the audio go to the device of your choice. My old Moto 360 did this, probably because it had no speaker though. It was convenient.
gpmg762 said:
Both car and s3 are connected to the phone so either one can answer a call.
Click to expand...
Click to collapse
My car doesn't connect to phone audio while Gear is connected, I have to disconnect gear first. Phone is Nexus 6P
Seems the Nexus 6P has a bit of issues with bluetooth connections with cars, https://www.google.com.sg/search?q=.....1.1.64.psy-ab..0.2.341...0i20k1.cGibaV3ew9Q
Maybe can you can try it with another mobile to see if the problem lies your phone or car.
gpmg762 said:
Seems the Nexus 6P has a bit of issues with bluetooth connections with cars, https://www.google.com.sg/search?q=.....1.1.64.psy-ab..0.2.341...0i20k1.cGibaV3ew9Q
Maybe can you can try it with another mobile to see if the problem lies your phone or car.
Click to expand...
Click to collapse
I can confirm the Nexus 6P bluetooth issues. It drove me crazy. Switched to an S8+ and those issues disappeared. In re to the OP, my gear s3 works seamlessly with my s8+ and my car's bluetooth connection. Which device answers the call, it's gets the volume. I noticed mention about being able to direct the connection to a different device: this option exists for my S8+ but I haven't seen it on the Gear. Maybe because of a lack of screen real estate?
I'm using oneplus 3t and have exactly the same issue, both car and watch are connected and none can take the call. Has this been resolved by anyone?