Hello
I recently upgraded to CyanogenMod 12 --> [DEV][ROM][5.0.2][HTCLegacy] Unofficial CyanogenMod 12 | 02/03/2015 | BETA#3
I found it very slow so I tried to downgrade to CM 11 --> [ROM][KK 4.4.4][KTU84P] CyanogenMod 11 Weekly Builds [Build#7] - 3/30/2015
But even after flashing the rom, I'm getting the "No OS Installed!" message. My phone would just boot back into recovery (my recovery is TWRP 2.8.5.0)
I am still trying to figure out why it won't boot.
Is it related to the fact that I changed the /system and /data partitions to .f2fs (from their original .yaafs2 ? If so, how can I revert this change? And yes I tried changing them to ext2, 3 and 4 but the problem persists.
If not, what is the problem exactly and how can I fix it?
Any sort of help in this matter will be greatly appreciated. Thank you.
msbnat said:
If not, what is the problem exactly and how can I fix it?
Any sort of help in this matter will be greatly appreciated. Thank you.
Click to expand...
Click to collapse
Read THIS post again. You need another recovery
msbnat said:
my recovery is TWRP 2.8.5.0
Click to expand...
Click to collapse
WTF? What phone are you use?
BCCCPCEKCAHET said:
Read THIS post again. You need another recovery
WTF? What phone are you use?
Click to expand...
Click to collapse
Posting in HTC Pico section so obv using HTC Pico (Explorer). Will try this out and update.
EDIT: Problem Fixed! Thank you for the support.
Related
Hi Guys,
I've been using Paranoid Android for some time now and love it. I have just downloaded the latest version, performed Dragun's wipe script and when trying to install, I keep getting an error stating a status 7, some symlinks failed. I have tried re-downloading the rom, plus a previous version as well as full wiping everything and factory reset to no avail. Has anyone had this issue? Can anyone help?
I have just tried to install another rom to get past this for now, however it appears the phone is now stuck on the loading screen... Any help would be appreciated.
I would post in the development thread for the rom, however as I haven't posted before, I don't have sufficient permissions.
Cheers,
Mike
Mikeparakh said:
Hi Guys,
I've been using Paranoid Android for some time now and love it. I have just downloaded the latest version, performed Dragun's wipe script and when trying to install, I keep getting an error stating a status 7, some symlinks failed. I have tried re-downloading the rom, plus a previous version as well as full wiping everything and factory reset to no avail. Has anyone had this issue? Can anyone help?
I have just tried to install another rom to get past this for now, however it appears the phone is now stuck on the loading screen... Any help would be appreciated.
I would post in the development thread for the rom, however as I haven't posted before, I don't have sufficient permissions.
Cheers,
Mike
Click to expand...
Click to collapse
are you S-ON or S-OFF?
rzr86 said:
are you S-ON or S-OFF?
Click to expand...
Click to collapse
Hi
I'm S-OFF.
Mikeparakh said:
Hi
I'm S-OFF.
Click to expand...
Click to collapse
then check if you have the latest fw version
as far as i know paranoid android rom requires 3.32fw or 3.33fw
also what recovery do you have?
rzr86 said:
then check if you have the latest fw version
as far as i know paranoid android rom requires 3.32fw or 3.33fw
also what recovery do you have?
Click to expand...
Click to collapse
I'm on 3.33 and am using 4ext recovery touch. Thanks.
Mikeparakh said:
I'm on 3.33 and am using 4ext recovery touch. Thanks.
Click to expand...
Click to collapse
All fixed now thanks to the wonderful developers of PA. Thanks for your help though!
Mikeparakh said:
All fixed now thanks to the wonderful developers of PA. Thanks for your help though!
Click to expand...
Click to collapse
Can i please what steps you took to get this working again? I get same symlink error when trying to flash from CWM
midnight2065 said:
Can i please what steps you took to get this working again? I get same symlink error when trying to flash from CWM
Click to expand...
Click to collapse
flash the latest firmware if you do not have it(you have to be S-OFF)
also install 4ext recovery.it is better
Hi. Please help. I have been running CM10.1 on my rooted tablet and I decided to try CM11. I don't know what I have done but CM11 did not work so I tried to go back to CM10.1, and that just gets stuck on the boot screen. I have tried several different Roms and they all get stuck on the boot screen. The only Rom that will work is CM9.1? I don't know what I could have done to cause this. I am running Philz Touch 6.12.8. Any help would be greatly appreciated.
Thanks
mattmust said:
Hi. Please help. I have been running CM10.1 on my rooted tablet and I decided to try CM11. I don't know what I have done but CM11 did not work so I tried to go back to CM10.1, and that just gets stuck on the boot screen. I have tried several different Roms and they all get stuck on the boot screen. The only Rom that will work is CM9.1? I don't know what I could have done to cause this. I am running Philz Touch 6.12.8. Any help would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
I think you need to replace your recovery twrp. Because I replace CM10 or CM11 works fine
http://forum.xda-developers.com/showthread.php?t=2548257
blue_drt29 said:
I think you need to replace your recovery twrp. Because I replace CM10 or CM11 works fine
http://forum.xda-developers.com/showthread.php?t=2548257
Click to expand...
Click to collapse
Yeah. I tried that and it is still the same. Thanks though
mattmust said:
Yeah. I tried that and it is still the same. Thanks though
Click to expand...
Click to collapse
i think you should flash back to stock then root then try new recovery and then flash the rom
i think the problem will be solved i do have same problem
Mohdsultan said:
i think you should flash back to stock then root then try new recovery and then flash the rom
i think the problem will be solved i do have same problem
Click to expand...
Click to collapse
I can't even flash back to stock. It still gets stuck on boot screen.
Thanks
Make sure you did a factory reset and format /system before.
Android-Andi said:
Make sure you did a factory reset and format /system before.
Click to expand...
Click to collapse
Yeah. I already did that. Thanks
@mattmust is it a verizon Tab?
Android-Andi said:
@mattmust is it a verizon Tab?
Click to expand...
Click to collapse
I'm not sure. I don't think so.
I also noticed when in recovery it says "E: unable to mount '/efs'"
mattmust said:
I'm not sure. I don't think so.
I also noticed when in recovery it says "E: unable to mount '/efs'"
Click to expand...
Click to collapse
Your EFS seems to be broken for some reason... that´s why it won´t boot into system....
this got reported in a german forum, because 2 guys flashed CWM 6.0.4.4-Touch on the device... CWM 6.0.4.4-Touch not released for the Tab 2 - it was for a different device and flashing that recovery brokes EFS for them.
Android-Andi said:
Your EFS seems to be broken for some reason... that´s why it won´t boot into system....
this got reported in a german forum, because 2 guys flashed CWM 6.0.4.4-Touch on the device... CWM 6.0.4.4-Touch not released for the Tab 2 - it was for a different device and flashing that recovery brokes EFS for them.
Click to expand...
Click to collapse
Yeah. That makes sense as I did put a version of CWM touch on. And the trouble started after that. Just need to try and find a solution to sort it now. Thanks for your help
mattmust said:
Yeah. That makes sense as I did put a version of CWM touch on. And the trouble started after that. Just need to try and find a solution to sort it now. Thanks for your help
Click to expand...
Click to collapse
Latest CWM Touch for our Device 6.0.2.7 ... i am sure you used a file for a different device and that broke your EFS!
Do you still have the file? you can upload it for me and send me a private message with the link, i can take a look on it. Please don't post the file here in the thread (i do not like to see someone else flashing it and breaking his efs).
Hi,
I've found this brilliant CM ROM for HTC Wildfire S:
http://forum.xda-developers.com/showthread.php?t=2735775
However I have a strange problem with installing the latest version cm-11.0.0-RC10-marvel.zip.
An oldest version cm-11-20140615-EXPERIMENTAL-BETA1-marvel.zip installs fine!
My recovery is "Team BlueRidge Recovery v1.1.0".
Is there something I'm doing wrong? I checked md5 sums and they're OK!
Thank you in advance for any help with this.
Regards,
grzechol
I have the same problem
please someone help
Hello htxosku8
According to what you're experiencing it seems it has in incompatible update binary.
Well you can take a look at the CWM Wiki, all recoveries have the same sort of error statuses.
Status 0
This is usually caused by an incompatible update-binary in edify ZIPs. Replacing it with a compatible one, then re-signing the ZIP, will usually fix this error.
As said you can fix this error, just download another similar ROM for your device and replace the update binary from that in the one you get an error with. It should be fixed.
i have same problem
what can i do?
afsharblog said:
i have same problem
what can i do?
Click to expand...
Click to collapse
OS version + recovery are "outdated" Try to use latest TWRP / CWM + CM11
LS.xD said:
OS version + recovery are "outdated" Try to use latest TWRP / CWM + CM11
Click to expand...
Click to collapse
TWRP and CWM download links are broken
afsharblog said:
TWRP and CWM download links are broken
Click to expand...
Click to collapse
working CWM link
Hi,
XT1039: bootloader unlocked, rooted, stock rom 4.4.4
TO: nightly
Flashed 4118 bootloader, as detailed in http://forum.xda-developers.com/moto...tions-t2996087
It was successful.
Followed https://wiki.cyanogenmod.org/w/Install_CM_for_peregrine
unlocked bootloader
installed cm-recovery from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
tried to flash cm, got a bootloader error,
followed this guide: http://forum.xda-developers.com/showpost.php?p=59520890&postcount=233
Now using bootloader 411A
flashed cm-13.0-20160121-NIGHTLY-peregrine.zip
from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
now the phone is stuck at the boot screen.
So I flashed twrp recovery, successful and reflashed cm-13.0-20160121-NIGHTLY-peregrine.zip
I tried several different guides that included all sorts of cache deletion and format orders but the result is still the same
(I am not using an sdcard but only the internal storage.)
After rebooting, the phone is stuck on the Cyanogenmod boot icon (blinking cat face) since past half hour.
Please guide how to debug/recover.
fastboot and recovery are working
Thanks,
[edit:]
The cm-13.0-20160121-NIGHTLY-peregrine.zip was transferred by mounting the internal storage on the PC and copying it manually. Just in case this matters
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
satanas17 said:
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
Click to expand...
Click to collapse
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Just for testing, I have installed the stock rom to see if it works and it does. I now have a Motorola Android 5.1 on my phone. But thats not what I wanted.
Anyone having any idea how to make cyanogenmod work?
karstenme said:
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Click to expand...
Click to collapse
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
satanas17 said:
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
Click to expand...
Click to collapse
WOW Thank you very much, its working
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
karstenme said:
WOW Thank you very much, its working
Click to expand...
Click to collapse
U're welcome
karstenme said:
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
Click to expand...
Click to collapse
Not really able to explain...sometimes sh*t happens...
But this procedure works almost every time.
Surely due to your bootloader error after your first flash with CM recovery...something was broken...
Most important, now, it's working...Enjoy
I install cm but google play is not working and sallular data also not working.. Plz any one help me please..
Hi everyone.....I am new to rooting world....I rooted my one plus one last week.......Once rooted I was in cm 13.1...Then I switched back to cm 12.0 that is lollipop 5.0.2 by flashing the zip file..From then on if I try to flash any other rom,TWRP recovery provides error 7(Not able to install that particular zip file)......So i watched Youtube videos and saw answers in xda forums like deleting the asserts and rezipping the rom....Even then I am getting the same error
I am currently using latest TWRP recovery....Please anyone provide the solution .......Thanks in advance
anamadheeya said:
Hi everyone.....I am new to rooting world....I rooted my one plus one last week.......Once rooted I was in cm 13.1...Then I switched back to cm 12.0 that is lollipop 5.0.2 by flashing the zip file..From then on if I try to flash any other rom,TWRP recovery provides error 7(Not able to install that particular zip file)......So i watched Youtube videos and saw answers in xda forums like deleting the asserts and rezipping the rom....Even then I am getting the same error
I am currently using latest TWRP recovery....Please anyone provide the solution .......Thanks in advance
Click to expand...
Click to collapse
You need to upgrade to Cos13.1.x(latest stock firmware) for flashing new roms.
Mr.Ak sir , I am not been able to flash cm 13 rom..When flashing that also it displays error7.....Is there any other alternative options...Please help me..,.only thing I am able to flash is cm 12.0....Apart from that no rom is flashing
Mr.Ak said:
You need to upgrade to Cos13.1.x(latest stock firmware) for flashing new roms.
Click to expand...
Click to collapse
Mr.Ak sir , I am not been able to flash cm 13 rom..When flashing that also it displays error7.....Is there any other alternative options...Please help me..,.only thing I am able to flash is cm 12.0....Apart from that no rom is flashing
anamadheeya said:
Mr.Ak sir , I am not been able to flash cm 13 rom..When flashing that also it displays error7.....Is there any other alternative options...Please help me..,.only thing I am able to flash is cm 12.0....Apart from that no rom is flashing
Click to expand...
Click to collapse
You'll have to flash stock Cos13.1x(not cm13) from fastboot mode(not TWRP).
anamadheeya said:
Hi everyone.....I am new to rooting world....I rooted my one plus one last week.......Once rooted I was in cm 13.1...Then I switched back to cm 12.0 that is lollipop 5.0.2 by flashing the zip file..From then on if I try to flash any other rom,TWRP recovery provides error 7(Not able to install that particular zip file)......So i watched Youtube videos and saw answers in xda forums like deleting the asserts and rezipping the rom....Even then I am getting the same error
I am currently using latest TWRP recovery....Please anyone provide the solution .......Thanks in advance
Click to expand...
Click to collapse
Which version of TWRP are you using?
psxda97 said:
Which version of TWRP are you using?
Click to expand...
Click to collapse
3.1.1-0
Mr.Ak said:
You'll have to flash stock Cos13.1x(not cm13) from fastboot mode(not TWRP).
Click to expand...
Click to collapse
Sir, is their any guide in XDA forum regarding flash of cos13.1x.????Sorry if I am troubling you
anamadheeya said:
3.1.1-0
Click to expand...
Click to collapse
https://dl.twrp.me/bacon/twrp-2.7.0.0-bacon.img.html
try with this version. Let me know how it goes
psxda97 said:
https://dl.twrp.me/bacon/twrp-2.7.0.0-bacon.img.html
try with this version. Let me know how it goes
Click to expand...
Click to collapse
Again same error
anamadheeya said:
Again same error
Click to expand...
Click to collapse
I'm Sorry. That is wrong version. Try 2.8.6. I guaranty it will work.
anamadheeya said:
Sir, is their any guide in XDA forum regarding flash of cos13.1x.????Sorry if I am troubling you
Click to expand...
Click to collapse
If it didn't work here is the link you're asking for.
Let me know whether flashing TWRP 2.8.6 solved the problem
psxda97 said:
I'm Sorry. That is wrong version. Try 2.8.6. I guaranty it will work.
If it didn't work here is the link you're asking for.
Let me know whether flashing TWRP 2.8.6 solved the problem
Click to expand...
Click to collapse
Sorry had been busy in work so was not able to reply.....Thx TWRP 2.8.6 solved the problem by just removing the assert in update script of the zip file...Thanks for ur valuable suggestion
.