Related
HI dudes,
I managed to install TWRP and the last firmware on my Nvidia shield table (old model).
But I can't root it, I put UPDATE-SuperSU-v2.46.zip into my SD card and tried to flash it through the recovery but my tablet is stuck now at the boot logo ... is there a good way to root it ?
Maybe this UPDATE-SuperSU-v2.46.zip is not wompatible with our nvidia shield tablets ?
what superSU file did you use to root ?
Thanks
Use the latest
It should be the lastest version no ?
I downloaded this one : UPDATE-SuperSU-v2.46.zip.
I really do not understand why I'm stuck...
alucard_xs said:
It should be the lastest version no ?
I downloaded this one : UPDATE-SuperSU-v2.46.zip.
I really do not understand why I'm stuck...
Click to expand...
Click to collapse
Latest is 2.76
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
durgis said:
Latest is 2.76
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Click to expand...
Click to collapse
Thanks dude, I'll try.
it worked thanks dude.
I've an honor 8 FRD-AL00. I've fastboot installed and I'm able to access it. I'm also able to access eRecovery.
I've used SRK Tool to change the oeminfo and custom.bin. After trying to install the official L09 I think I bricked my phone.
Here are the steps I've done:
- Unlock bootloader
- Install recovery 6.0
- Root
- Changed oeminfo and custom.bin
- Reboot and tried to install a stock recovery.img boot.img and system.img (which failed while installing it) from offical L09 UPDATE.APP.
Current status: unable to boot either to recovery or android. what should I do in order to get my phone or install the L09 update or at least something that I can use? I've also used the 3 button trick with the dload/UPDATE.APP in the memory card but the phone doesn't show the loading screen it gets stuck into the huawei logo.
I've then tried to install CM13. I've successfully installed twrp-recovery.img but I'm not able to access it (button + vol down nor button + vol up).
Thanks for the help
djx24 said:
I've an honor 8 FRD-AL00. I've fastboot installed and I'm able to access it. I'm also able to access eRecovery.
I've used SRK Tool to change the oeminfo and custom.bin. After trying to install the official L09 I think I bricked my phone.
Here are the steps I've done:
- Unlock bootloader
- Install recovery 6.0
- Root
- Changed oeminfo and custom.bin
- Reboot and tried to install a stock recovery.img boot.img and system.img (which failed while installing it) from offical L09 UPDATE.APP.
Current status: unable to boot either to recovery or android. what should I do in order to get my phone or install the L09 update or at least something that I can use? I've also used the 3 button trick with the dload/UPDATE.APP in the memory card but the phone doesn't show the loading screen it gets stuck into the huawei logo.
I've then tried to install CM13. I've successfully installed twrp-recovery.img but I'm not able to access it (button + vol down nor button + vol up).
Thanks for the help
Click to expand...
Click to collapse
Why did you change the oenimfo and custom.bin?
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
Why did you change the oenimfo and custom.bin?
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
My main goal was to try to change from FRD-AL00 to FRD-L09. (chinese version to european)
djx24 said:
My main goal was to try to change from FRD-AL00 to FRD-L09. (chinese version to european)
Click to expand...
Click to collapse
Go back To stock .. try dload method body
Romiui said:
Go back To stock .. try dload method body
Click to expand...
Click to collapse
Doesn't work, it gets stuck at the huawei logo.
After a couple of tries I was able to get TWRP installed so I'm able to access and modify the filesystem.
I've noticed that, for some reason, my phone has the "default.prop" set up to "ro.product.model=eva" shouldn't this be FRD's or something like that?
Can someone provide me a copy of their /default.prop file so I could compare?
djx24 said:
Doesn't work, it gets stuck at the huawei logo.
After a couple of tries I was able to get TWRP installed so I'm able to access and modify the filesystem.
I've noticed that, for some reason, my phone has the "default.prop" set up to "ro.product.model=eva" shouldn't this be FRD's or something like that?
Can someone provide me a copy of their /default.prop file so I could compare?
Click to expand...
Click to collapse
Yes. EVA is another Honor phone. It can be caused of the process you did earlier.
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
Yes. EVA is another Honor phone. It can be caused of the process you did earlier.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
Yes I think it's the P9, do you have a copy of a valid "default.prop" file?
Thank you
djx24 said:
Yes I think it's the P9, do you have a copy of a valid "default.prop" file?
Thank you
Click to expand...
Click to collapse
Unfortunately no man.
Sent from my Galaxy Tab 3 using XDA Labs
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
djx24 said:
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
Click to expand...
Click to collapse
Glad you fixed it.
Sent from my Galaxy Tab 3 using XDA Labs
Can you please share the instruction please? I have FRD-AL00 and I have followed the debrand steps from VDO - GUIDE
I can see the info that changed to FRD-L09C432B131 but when I play the video, the phone just restart.
Step by Step guide please
Transfer to European version
Hi, it whould be realy helpfull, if you consider to shere how you menadge to transfer to european rom from chinese al-00. It whoul hepl meny of forum members.
djx24 said:
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
Click to expand...
Click to collapse
Hey , Why ???
I changed from AL10 to L19C432 an have the same problem. By pictures and videos my phone reboots.
but not always. can someone help me? thanks
mawe5 said:
I changed from AL10 to L19C432 an have the same problem. By pictures and videos my phone reboots.
but not always. can someone help me? thanks
Click to expand...
Click to collapse
I also have the same mistakes. Help please ...
For now a moment there is no solution for those issues - the only way is to change back to AL00.
Before you do, please install HiSuite, this tool installs all necessary drivers as well.
1) Unlock bootloader and install TWRP: https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
2) ROOT: Download SuperSU and flash it using TWRP
2.1) Power off, press volume up + power on
2.2) After TWRP loads, click on Install, select SuperSU zip file you just downloaded and flash it
2.3) Reboot
3) Debrand: https://www.youtube.com/watch?v=JZVsIKtdgV4&t=307s
3.1) This video shows how to debrand P9 but it works on Honor 8 (AL00, AL10, AL09 and AL19)
4) Flash new ROM
4.1) More info about ROMs: https://forum.xda-developers.com/honor-8/how-to/frd-al-00-04-09-10-14-19-differences-t3452924
4.2) ALXX ROM download: https://forum.xda-developers.com/ho...rk-tool-huawei-bootloader-root-t3470823/page3
4.2) LXX ROM download: https://www.androidsage.com/2016/12...rshmallow-emui-5-0-4-1-stock-firmware-update/
Hope this helps but please note FRD-L09 ROM running on FRD-AL00 phone is unstable.
Please let me know if you have any other questions.
---------- Post added at 11:42 PM ---------- Previous post was at 11:39 PM ----------
qsqa said:
For now a moment there is no solution for those issues - the only way is to change back to AL00.
Click to expand...
Click to collapse
Do you know if is there any hardware difference between AL00 and L09? What is the reason phone gets so unstable when you debrand to L09 and flash EU ROM?
i have honor 8 FRD-AL00C00B377 , i need unlock bootloader, but no have option in developer ( OEM UNLOCK ) , in CMD the code , adb unlock bootloader ( my code ) no work , FAIL
i need change my chines version for internacional, is possible ???
aureliomilitao said:
i have honor 8 FRD-AL00C00B377 , i need unlock bootloader, but no have option in developer ( OEM UNLOCK ) , in CMD the code , adb unlock bootloader ( my code ) no work , FAIL
i need change my chines version for internacional, is possible ???
Click to expand...
Click to collapse
adb reboot bootloader
fastboot oem unlock xxxxxxxxxxxxxxxx
I think my command is right.
Hi i need root htc a9 uhl telestra Android 7.0 2.18.841.1
And instaled twrp recovery my device is unlocked bootloader:fingers-crossed
Tnx
Pls...
Where did you find twrp for hiaeuhl... I have searched it for 1 week... plssss gimmi link.. plss
TWRP
%Producer% said:
Where did you find twrp for hiaeuhl... I have searched it for 1 week... plssss gimmi link.. plss
Click to expand...
Click to collapse
Yeah, there was a guide for TWRP for this device.... I can't find a lot, there's quite a few guides for the Sprint version; I have boost Marshmallow and refuse to switch to Nougat since it sucks.
https://eu.dl.twrp.me/hiae/twrp-3.1.0-0-hiae.img.html
flash it @download MODE
fastboot devices
fastboot flash recovery twrp.img
this is working with my hiaeuhl on 2.17.401.2
to root flash supersu 2.79 or 2.82 via twrp - working too
Thanks I did and Its work thanks... I want to ask someting what is the differentss of hiea and hieauhl(Gsm international)
Hello Friends,
I have an HTC desire 650, not dual sim, runs Marshmallow 6.0.1, I have already unlocked the bootloader using manufacturer's instructions, I tried to root with kingoroot, it fails every time, the phone is not bricked and restarts as it should, processor is qualcom snapdraagon 400 1.59 Ghz, model MSM8926, kernek architecture is armv7I, kernerk version is 3.4.0-pref-g1429477, I post the kernel because I saw a 2015 post on this site that for 6.0.1 requires to modify the kernel in order to root, and I have not found any more information on this matter,
Thank you,
$am
Sam_$epiol said:
Hello Friends,
I have an HTC desire 650, not dual sim, runs Marshmallow 6.0.1, I have already unlocked the bootloader using manufacturer's instructions, I tried to root with kingoroot, it fails every time, the phone is not bricked and restarts as it should......
Click to expand...
Click to collapse
I've built a TWRP recovery for this model long time ago, but I do not have the device to test it, and here is my latest build.
https://github.com/sabpprook/twrp_b...ownload/1.0.0/twrp-3.2.1-0-a17_unofficial.img
Try boot this TWRP, it will prevent to modify your recovery partition.
Code:
fastboot boot twrp-3.2.1-0-a17_unofficial.img
If boot command not work, you must flash it.
Code:
fastboot flash recovery twrp-3.2.1-0-a17_unofficial.img
Please let me know if you get any issues from TWRP recovery.
works in my desire but always apair "failed to mount \carrier when i want install any zip and i really need twrp in my phone:s...you can help me with this problem?
Luisillox said:
works in my desire but always apair "failed to mount \carrier when i want install any zip and i really need twrp in my phone:s...you can help me with this problem?
Click to expand...
Click to collapse
/carrier mount failure just doesn't matter, it won't make you fail to flash anything.
custom rom
Twrp works perfectly...any custom rom for desire 650?
I want to flash the TWRP recovery but need the original stock recovery just in case how do I get it as there is no stock rom out for this device yet
Have successfully got full root and twrp backup of stock rom
Root
glad to hear that you made it! i want to root my desire 650 too, but it's safe?
and someone know if there's some custom rom for this device?
i still having warranty until june, so i want to know if it worth .
my english isn't good enough yet hehe, but i hope it's understandable.
Greetings!
I have full root and using HTC 650 single sim working fine except I found that when I tried to restore twrp backup my phone was factory reset with no root at all and had no problems from that tho but it would be good if it could be fixed as I don't want to keep starting from scratch when I want to try xposed on this device too
oh, i hope you find a solution, let me know if xposed works properly on the desire 650, please!
and many thanks!
Root guide
Boot recovery
Backup stock rom
Install supers.zip latest then reboot
Install flashify and backup stock recovery and boot.img
You can flash recovery using flashify all tested and working perfect
P.s ignore errors on twrp and yes backup is factory stock rom no idea why hopefully be a fix soon
Sparkoboy123 said:
Have successfully got full root and twrp backup of stock rom
Click to expand...
Click to collapse
I unlocked bootloader, but I am not able to go any further. The phone seems bricked
just got one of these as a first smartphone for a friend - are there any custom roms available for it? what a shame HTC have not kept it up to date at all.
Hi, is there a Rom 7.x for this device ?.
The TWRP file worked for me thanks
At this moment there are no custom roms
I finally rooted my device, TWRP file worked fine. Unfortunately my phone has the "s-on" status and I can't modify anything in the /system even with this root access, if anyone knows something about this and how can I change that status please share some info, I've been looking but haven't found something that works.
Thanks and sorry for my english, still learning
Can i try this twrp in my htc desire 650 dual sim
Im using htc desire 650 dual sim.i cant root the device with application like kingroot...i dont find any manual rooting technics in xda...
So can i use the twrp for my phone
Hi, I have successfully installed Twrp, but by mistake I deleted the system.
Could someone give me a complete backup image?
does not pass the recovery mode.
Hi
I need custom rom or ruu image
Custom rom
Search "HTC desire 650 custom ROM" for custom ROM - still untested by me, but looks ok
how can u root if ?
please describe the steps, everyone right now is saying it can't be rooted ?
whats the problem?
also is there any one click service that claims they can do it ?
No it can't be rooted right now using the twrp method. You can try kingo root etc app-based methods but I won't suggest. I have always first installed twrp and then rooted, there is no twrp for a750f right now.
I want to update versoin
shinesin88* said:
how can u root if ?
please describe the steps, everyone right now is saying it can't be rooted ?
whats the problem?
also is there any one click service that claims they can do it ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-a7/how-to/root-a750fn-u1aric-build-t3863628
HOW TO ROOT GALAXY A7 2018 (SM-A750F) or FLASH TWRP RECOVER & MAGISK.
I CAN'T FIND ANY WEBSITE WHERE I CAN FIND THESE FILES WITH WHICH I CAN ROOT MY GALAXY A7 (2018).
I WANNA USE XPOSED FRAMEWORK (SYSTEMLESS OR NORMAL) BUT THERE'S NO METHOD OF FLASHING TWRP OR SUPER SU OR EVEN MAGISK.
PLEASE ANYONE REPLY AND HELP.
Ayushj702 said:
No it can't be rooted right now using the twrp method. You can try kingo root etc app-based methods but I won't suggest. I have always first installed twrp and then rooted, there is no twrp for a750f right now.
Click to expand...
Click to collapse
I don't have the device but if you provide the boot.img and recovery.img and are ready to test, I can compile TWRP for your device
RVR said:
I don't have the device but if you provide the boot.img and recovery.img and are ready to test, I can compile TWRP for your device
Click to expand...
Click to collapse
Hi I will soon buy this phone, but I'm a beginner at this, is it easy to find the boot.img and the recovery.img? Is it something a beginner can do?