Hey there,
I tried to compile a CM12.1 based ROM but ended up having a Sustem UI FC on bootup.I did try to compile the ROM with adb enabled but my device was not getting detected in the adb.So a random guy told me to add this (PRODUCT PREBUILT WEBVIEWCHROMIUM := yes ) to my device BoardConfig.mk file.Now the question is - will adding this line help me out with the SystemUI error? Also,should I use the prebuilt libwebchromium.so file or build it from source? What are the benefits if I build it from source? Do reply.
Thanks
Regards,
Aniket Lamba
Hi, thank you for using XDA Assist. The purpose of XDA Assist is not to supply technical support but to point you in the right direction to get that support. I see you've posted a similar question here, http://forum.xda-developers.com/chef-central/android/build-freezes-building-t2996934/page2 That is the best place to ask your question. So I'm going to close this post.
Related
Hello,
I recently downloaded the official AOSP source code into my machine and I want to compile it for my GT-I9300,
but before that where do I get the device blobs and properitary drivers from? Can I use CM's device tree? Are there any other device trees?
And in an addition to that how do I get the Kernel to work properly? Do I need to use the CM kernel?
A hint / tip or a link to a guide would be appreciated.
Thanks in advance
I can suggest you to go to xda university
I'm sure that you will find all you need for cooking your own build
Good luck
Hi, I am trying to add the Asix AX88772 driver to my note 10.1 but i always get errors. Can someone create usbnet.ko and axis.ko with the driver on it to be used in the stock rom 4.4.2 N8010XXUDNE4 with stock kernel?
Or a stock kernel but with the drivers installed?
Thank you so much
markelsa said:
Hi, I am trying to add the Asix AX88772 driver to my note 10.1 but i always get errors. Can someone create usbnet.ko and axis.ko with the driver on it to be used in the stock rom 4.4.2 N8010XXUDNE4 with stock kernel?
Or a stock kernel but with the drivers installed?
Thank you so much
Click to expand...
Click to collapse
Hi, for a request like this, you should also provide links to sources to be more helpful
to any who wish to help you. Also, posting the relevant portion of your compile log with respect to the "error"
as well as what steps you took to add that support would be good.
m
moonbutt74 said:
Hi, for a request like this, you should also provide links to sources to be more helpful
to any who wish to help you. Also, posting the relevant portion of your compile log with respect to the "error"
as well as what steps you took to add that support would be good.
m
Click to expand...
Click to collapse
Hi, ok sorry for the poor info.
I used this guide http://forum.xda-developers.com/showthread.php?t=2131825 to make the files.
The error i get it on the tablet (exec format error) while i am trying to load usbnet.ko
The kernel source is here http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=8010.
This one "N8010XXUDNE4 GT-N8010_EUR_KK_Opensource.zip"
I used all the toolchains of the tutorial and some others of 2010 but they always say the same "exec format error". The kernel source says to use a 2010q1/arm-none-linux-gnueabi-gcc. I only find the codesourcery one but it says the same.
Thank you for the help and sorry if i write someting wrong, english is not my first language.
Hello there, I have bought Wikipad WPT500 recetly, updated it and managed to set boot.img as insecure and root completely. Thing is, it's quite old already, so I would like to OC kernel a bit or at least install twrp. It has potential, that's for sure. Thing is, there's no source available. I;ve contacted dev team from them but no response.
Does anyone know the way to modify kernel (OC it, i know there's no way to add schedulers or governonrs without sources) or compile TWRP without sources, based on stock images ?
Please understand XDA Assist Mission as highlighted in the First Sticki thread in this forum.
The mission of XDA Assist is to provide basic help to those who have tried searching but can't find what they are looking for and need assistance. This is not a "helpdesk" providing technical assistance but more to point you in the correct direction with your problem. Perhaps you can't find posts on how to root your phone, install custom recovery or maybe you have questions about how to navigate and use features on the site.
Click to expand...
Click to collapse
Having said that given you are a Senior member, you should be able to find out where such a question should be posed.
Thread Closed. Thank you.
I have cygwin installed on windows 10
I have kernel extracted in android directory in cygwin home/user/android/kernel
now I want to compile the kernel
could someone help me with this ?
[edit] I have the samsung kernel source
ok I will try to explain my problem more
I have cygwin installed with all required packages
I have kernel source
now I want to compile the kernel without config
can this be done ?
please help
AlMaghraby said:
I have cygwin installed on windows 10
I have kernel extracted in android directory in cygwin home/user/android/kernel
now I want to compile the kernel
could someone help me with this ?
Click to expand...
Click to collapse
AlMaghraby said:
[edit] I have the samsung kernel source
Click to expand...
Click to collapse
AlMaghraby said:
ok I will try to explain my problem more
I have cygwin installed with all required packages
I have kernel source
now I want to compile the kernel without config
can this be done ?
please help
Click to expand...
Click to collapse
Greetings,
Please read the description and Sticky threads for XDA Assist. This is not a help desk. Our purpose here is to guide NEW members to the correct section or thread relative to their issues. We don't help Senior members here. As a Senior member, you are expected to use the search tools provided to you and find the correct location to post your questions.
Thanks for understanding.
Thread closed.
Hello,
I have decided to try building Android from source for one of my phones using this guide:
https://source.android.com/source/requirements.html
I am at the step where i need to add the proprietary binaries for my phone,
but i´m unable to find them. I have looked everywhere. The phone in question is a Lenovo K30-T.
Can anyone tell me where I can find the binaries?
KiwiTheOne said:
Hello,
I have decided to try building Android from source for one of my phones using this guide:
https://source.android.com/source/requirements.html
I am at the step where i need to add the proprietary binaries for my phone,
but i´m unable to find them. I have looked everywhere. The phone in question is a Lenovo K30-T.
Can anyone tell me where I can find the binaries?
Click to expand...
Click to collapse
Hello,
We find most properitary vendor files of various OEM's here https://github.com/themuppets
Regards
Vatsal,
Forum Moderator.
Vatsal said:
Hello,
We find most properitary vendor files of various OEM's here https://github.com/themuppets
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
Thanks for the answer, but i can't find lenovo vendor files, should i use Quallcom's instead?
In the Quallcom directory there are files for the SOC of the phone, but will they also work with things like the digitizer or buttons?
KiwiTheOne said:
Thanks for the answer, but i can't find lenovo vendor files, should i use Quallcom's instead?
In the Quallcom directory there are files for the SOC of the phone, but will they also work with things like the digitizer or buttons?
Click to expand...
Click to collapse
Hello,
No qcom binaries are different thing altogether.
If you have CM for your device, ask the developer to show you the vendor he is using.
Or you can generate blobs from stock firmware.
Regards
Vatsal,
Forum Moderator.