Hi Everybody
I recently bought TF300T and now trying to connect my PS3 Dualshock 3 controller to it, but facing problems.
I have jellybean 4.1 as OS and trying to conect using dock USB Port.
In Settings -> Bluetooth -> My PS3 controller is shown, but when i click on it to connect, error message comes " Unable to Communicate with Blah Blah..)
It doesnot work in game, while in normal tablet mode, i can move thru items/pages with my controller.
I have read so many forums over internet which shows the simple steps to connect, i tried to use them a number of times but no success.
Also, I tried with different games like FIFA2012, Shadow Gun, Mass Effect
Please helpout, am I doing something wrong or its just jellybean not allowing to.
Thanks
Jas
jasjottoor said:
Hi Everybody
I recently bought TF300T and now trying to connect my PS3 Dualshock 3 controller to it, but facing problems.
I have jellybean 4.1 as OS and trying to conect using dock USB Port.
In Settings -> Bluetooth -> My PS3 controller is shown, but when i click on it to connect, error message comes " Unable to Communicate with Blah Blah..)
It doesnot work in game, while in normal tablet mode, i can move thru items/pages with my controller.
I have read so many forums over internet which shows the simple steps to connect, i tried to use them a number of times but no success.
Also, I tried with different games like FIFA2012, Shadow Gun, Mass Effect
Please helpout, am I doing something wrong or its just jellybean not allowing to.
Thanks
Jas
Click to expand...
Click to collapse
The are a paid app four use it in games.
Never heard about use ps3 controller "plug&play"
The app, change mac adress of bluethoot master of the controler & installs in the phone/tablet a protocolo to comunicate with it...
And one thing, a very few games support external pad....
Good luck
I recently purchased the Lenovo S6000L tablet for the purpose of traveling. I wanted a large screen (10.1) tablet that could do the basic functions of a laptop, without having to lug around my 17.3 inch HP laptop to and from work/etc. My issue is, I work for a company that will not allow us to access their WiFi (security reasons), but we can use any LAN. I purchased an OTG cable and a USB to Ethernet converter. To my surprise, my Lenovo tablet wouldn't recognize the converter, thus, not allowing me to access the internet via the OTG cable. After that failure, I decided to root my tablet, which I did. Even with the root I can't seem to tweak the tablet to allow the internet connection bridge to work. Being P/O, I decided to go a step further by flashing a custom ROM to the tablet in hope that a different ROM would read and react to the OTG setup, but I'm unable to find a ROM that would work. Well their you have it, this is my big issue. Even though those are the steps I've taken or are willing to take, doesn't mean It's the only thing I'm looking to do, I'm open to anything that will work. So I desperately ask, does anyone have or know of a solution for me to use a RJ45 ethernet cable on this S6000L Lenovo tablet?
P.S. I've hooked up the USB to Ethernet to my PC and it worked, so it's not faulty. I've hooked up a flash drive to my tablet via the OTG cable and that worked also, so the OTG cable works as well.
USB to ethernet adapter I'm using: Gigaware® USB Ethernet Adapter
Wayne_1da said:
I recently purchased the Lenovo S6000L tablet for the purpose of traveling. I wanted a large screen (10.1) tablet that could do the basic functions of a laptop, without having to lug around my 17.3 inch HP laptop to and from work/etc. My issue is, I work for a company that will not allow us to access their WiFi (security reasons), but we can use any LAN. I purchased an OTG cable and a USB to Ethernet converter. To my surprise, my Lenovo tablet wouldn't recognize the converter, thus, not allowing me to access the internet via the OTG cable. After that failure, I decided to root my tablet, which I did. Even with the root I can't seem to tweak the tablet to allow the internet connection bridge to work. Being P/O, I decided to go a step further by flashing a custom ROM to the tablet in hope that a different ROM read and react to the OTG setup, but I'm unable to find a ROM that would work. Well their you have it, this is my big issue. Even though those are the steps I've taken or are willing to take, doesn't mean It's the only thing I'm looking to do, I'm open to anything that will work. So I desperately ask, does anyone have or know of a solution for me to use a RJ45 ethernet cable on this S6000L Lenovo tablet?
P.S. I've hooked up the USB to Ethernet to my PC and it worked, so it's not faulty. I've hooked up a flash drive to my tablet via the OTG cable and that worked also, so the OTG cable works as well.
USB to ethernet adapter I'm using: Gigaware® USB Ethernet Adapter
Click to expand...
Click to collapse
you cannot use like that because to use internet from other device to android you must use reverse tethering method and it can be done only from connecting it to a laptop or pc
so yyou cant use internet directly from lan cable to your tab
I don't want to use it from another device.
pradeepxtremehacker said:
you cannot use like that because to use internet from other device to android you must use reverse tethering method and it can be done only from connecting it to a laptop or pc
so yyou cant use internet directly from lan cable to your tab
Click to expand...
Click to collapse
I'm not using it from another device, I'm only using it and want to use it from a router and/or directly from a modem. I only hooked the adapter to my laptop once just to verify the adapter was working.
Wayne_1da said:
I'm not using it from another device, I'm only using it and want to use it from a router and/or directly from a modem. I only hooked the adapter to my laptop once just to verify the adapter was working.
Click to expand...
Click to collapse
yes i understood your question
i said there is no way to use internet in tab from lan cable
The Nexus 7 tablet does it.
pradeepxtremehacker said:
yes i understood your question
i said there is no way to use internet in tab from lan cable
Click to expand...
Click to collapse
Corrections for the above reply: I misread your reply. In theory, reverse tethering is the same method. A source that contains internet(PC) that you bridge to your tablet and gives it internet. The Nexus 7 is one tablet that allows you to bridge a RJ45 to the tablet for LAN access, and their are others. My best guess is it's an software issue that Lenovo has blocked, but I'm looking for a way around it. I don't know if they added anything specific to the stock that is killing that use or is it just that the adapter I purchased isn't compatible with what I believe is Linux based software. As I said, I will travel any path to victory, even if I have to flash software that's used on the Nexus 7, if possible.
Sorry for the delay, I'm at work and people keep coming to me.
Houston, I believe I have a solution to my problem!!
I have no clue why I didn't think about it earlier but all it may take to remedy my issue can be spelled with one word, Portable Wireless Router. Ok, that's 3 words, but who cares! I don't. Whenever I'm in a situation where LAN is available but WLAN isn't, I figure all I would have to do is to plug the LAN into my soon to be purchased TP-LINK TL-WR702N 150Mbps Wireless N Nano Router. And BOOM! my own private WiFi hotspot.
Hello everyone.
I'm having some difficulties connecting my Dual Shock 3 controller to my Lenovo Yoga Tablet 10 HD+.
I'm a long time user of the Playstation emulator FPSE. however, ever since buying this tablet, I haven't been able to connect my controller. It's like the app doesn't recognize it.
I'm suspecting it has something to do with the fact that my tablet supports USB host mode as in it charges any devices connected by USB.
In any case, I tried downloading the app Sixaxis Enabler, and when running the tutorial and trying to connect my controller, a message said something like "tablet software doesn't support game controllers."
Does anyone have an explanation for this problem?
Thanks.
OK, not technically a question about android, I'm just trying to connect an android compatible device to a PC via bluetooth.
I have an ipega 9021 controller for android (http://ecx.images-amazon.com/images/I/41O1ixqkGGL._SY300_.jpg), and was wondering if it's possible connecting it to PC properly.
I can connect the controller, but it doesn't reconnect automatically, so I have to delete the device and re-connect it every time.
Maybe I'm doing it wrong? I set it to gamepad mode (X + home), search for devices on PC, when the device is discovered, I got to properties and check the "drivers for keyboard, mice, etc (hid) and only then connect (otherwise I get an error). The controller then works great, but upon disconnecting I have to do the process again.
I'm trying to get my Xbox 360 wireless controller and wireless receiver (Chinese knockoff that works perfect on PC) I had laying around to work with my OPO. Sadly this has been harder then I expected. I have ran into the following problem. After I reboot my phone and the receiver is connected through a OTG USB cable, my controller is connected to my OPO and I can move in menus and play a SNES game for example. The problem however is that this connection remains for a very short amount of time, it seems that the phone stops seeing the USB device that is connected. When trying other USB devices this problem does not occur, I tried a USB stick and a USB mouse. Once the connection is lost the only way to regain connection is to reboot the phone.
I have no idea why this is happening
I've tried many settings and tested a lot of stuff:
I followed the steps in this thread: http://forum.xda-developers.com/showthread.php?t=1792531
I also messed around with other product ID settings related to xbox 360 controllers: http://www.linux-usb.org/usb.ids
On my Windows 7 PC I used USBview.exe to see with which ID the receiver/controller combination was identified which was: 045e 0291 (Microsoft Xbox 360 Wireless Receiver for Windows)
I used the app USB Device Info to see if my OPO was detecting anything via the OTG cable. As mentioned above after a few seconds ~ < 1min it just disappears.
I've searched in general with Google and specifically on XDA and the OPO forums but I've not found a similar problem with regards to the disconnection problem.
Anyway, if someone here has experience with wireless xbox 360 controller on the OPO or USB devices that disappear. Help would be appreciated!
I think I might have found why this will not work correctly, the default kernel of the OPO doesn't have xpad.ko.
Alex240188 said:
The problem is that there are no drivers for the Xbox 360 control pad.
You need xpad.ko for the controller to work and ff-memless.ko for the vibrators.
Unfortunately these have to be built for the kernel you are running and as far as I know nobody has built any for the nexus 5 yet
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Some other sources that might have some relevance:
https://jira.cyanogenmod.org/browse/CYAN-4469
http://www.androidsim.net/2011/07/how-to-30-connect-xbox360-wireless.html
http://forum.xda-developers.com/showthread.php?t=1568760
edit2:
This OPO kernel has xpad.ko included, I might check it out and see what happens.
http://forum.xda-developers.com/one...ernel-boeffla-kernel-1-0-2-0-beta-09-t2899974
Edit3:
Tried the kernel, switched on the xpad module, rebooted.... Still the same problem