what hardware component makes a phone have certain bands? be it 3g or for voice. what makes a phone have at&t bands of 850/900/1800/1900 MHz or at&t 3g bands instead of tmobiles 3g bands? Is it true that there are currently no phones that FULLY work on 2(or more) different networks, including overseas? I know you can get the iphone on tmobile but its not fully capable because you dont have 3g. how far are we from being able to pick our phone then the carrier instead of picking a carrier and then choosing one of their phones?
Also, it seems that at&t's 3g bands are listed as "tri band global" as apposed to tmobiles that only have 2 and are not listed as "global". does that mean that at&t's bands are more capable and may work in areas over seas? wouldnt that mean that at&t has the most advanced cell technology(or at least the most capable) in the country?
no one knows???????????????????????
the crystals inside the cpu often made by qualcomm decide the band supported
Rudegar said:
the crystals inside the cpu often made by qualcomm decide the band supported
Click to expand...
Click to collapse
that sucks. so its all up to qualcomm(or the maker of the cpu) and the politics if we ever get a fully supported device?
a big whoop for the UK all our carriers use the same bands
Dear All,
I recently got this device in Hong Kong and is hapi with its performance!
But I am still wondering if this device could actually use the LTE available in HK?
I knw the msm8960 claimed to be capable of utilizing all frequency of radio,
so is it possible that there is some soft lock in the baseband?
Could i flash the baseband or replace the modem driver from other device to access other frequency?
any idea is appreciated!
Thanks!
Vasco
I think it has to modifiy the ROm and the hardware
I tried to figure out, if our Photon Q is supporting more LTE bands than 1900 MHz (#2 or/and #25).
-> http://en.wikipedia.org/wiki/E-UTRA#Frequency_bands_and_channel_bandwidths
On some sites there are reports for having another band. (Have to search again, I think it was 850 MHz, #26 or 700 MHz, #12/#17/#29.)
I have also searched for supported frequencies for MSM8960.
I found some BlackBerry devices based on that SoC and 2 different versions of supported LTE bands.
One version (UK) supported 4 in europe used bands und the other version (US) supported 4 in US/Canada used bands.
I think that the Photon Q is like the BlackBerry US version and supports 4 LTE bands in US/Canada.
If you need a few sites, I will search again and show it to you.
The strange thing is, if I set to LTE only (via 4636) I can see all 4 carrier (germany).
We have 3 bands with LTE on it, but I can only get signal to max 2 of them.
Band 3, 7 and 20 (1800, 2600, 800 MHz).
The weird thing is, that on band #20 (800 MHz) only 3 carrier are active, so it has to be band #3 or #7.
Maybe I'm missinterpreting things and thats just a sideeffect of crossing bands of LTE US and UMTS Germany.
On stock ROM there was another "secret phone code" to see what the phone-part is doing. (From qualcomm I believe.)
I think I will test it some other day, to see which band is active.
At last, I was never been able to "login" or "register" into my carriers network within LTE.
Please discuss about that possibility, I really want to find out, which frequencies are supported by our phone on LTE.
Loader009 said:
I tried to figure out, if our Photon Q is supporting more LTE bands than 1900 MHz (#2 or/and #25).
-> http://en.wikipedia.org/wiki/E-UTRA#Frequency_bands_and_channel_bandwidths
On some sites there are reports for having another band. (Have to search again, I think it was 850 MHz, #26 or 700 MHz, #12/#17/#29.)
I have also searched for supported frequencies for MSM8960.
I found some BlackBerry devices based on that SoC and 2 different versions of supported LTE bands.
One version (UK) supported 4 in europe used bands und the other version (US) supported 4 in US/Canada used bands.
I think that the Photon Q is like the BlackBerry US version and supports 4 LTE bands in US/Canada.
If you need a few sites, I will search again and show it to you.
The strange thing is, if I set to LTE only (via 4636) I can see all 4 carrier (germany).
We have 3 bands with LTE on it, but I can only get signal to max 2 of them.
Band 3, 7 and 20 (1800, 2600, 800 MHz).
The weird thing is, that on band #20 (800 MHz) only 3 carrier are active, so it has to be band #3 or #7.
Maybe I'm missinterpreting things and thats just a sideeffect of crossing bands of LTE US and UMTS Germany.
On stock ROM there was another "secret phone code" to see what the phone-part is doing. (From qualcomm I believe.)
I think I will test it some other day, to see which band is active.
At last, I was never been able to "login" or "register" into my carriers network within LTE.
Please discuss about that possibility, I really want to find out, which frequencies are supported by our phone on LTE.
Click to expand...
Click to collapse
Dear Loader009,
Thanks for your information! I'm really impressed that you could actually search the carrier in 'LTE only from Germany!
Could you please share the version of ROM you are using?
And if possible, any screenshot? I really want it can be used in HK with LTE(1800, 2100 & 2600Mhz)
Also do you have more information about the secret phone code? I think it would be interesting
Actually, I noted that xt925 and xt905 are using the same chip MSM8960 with LTE usable in HK.
Is there anyone can locate the radio/baseband of their rom and port it for XT897?
I am willing to try it with my machine.
If this work, I think we could use this photon q all over the world!
Any idea?
Regards,
Vasco
disablewong said:
Dear Loader009,
Thanks for your information! I'm really impressed that you could actually search the carrier in 'LTE only from Germany!
Could you please share the version of ROM you are using?
And if possible, any screenshot? I really want it can be used in HK with LTE(1800, 2100 & 2600Mhz)
Also do you have more information about the secret phone code? I think it would be interesting
Actually, I noted that xt925 and xt905 are using the same chip MSM8960 with LTE usable in HK.
Is there anyone can locate the radio/baseband of their rom and port it for XT897?
I am willing to try it with my machine.
If this work, I think we could use this photon q all over the world!
Any idea?
Regards,
Vasco
Click to expand...
Click to collapse
Of course, I was just blind guessing the hardware for xt926 and xt907 are using the same hardware.
If not, there should be one chip controlling the modem channel of the device to be replaced.
But WHICH ONE???
Any expert in this area can solve this question? I am a dummy for radio stuffs
This seems like it's getting pretty interesting.
Sent from my XT897 using Tapatalk 2
Dear all,
I'm also very interested in this topic since I imported a Photon Q to Germany and was wondering if it's possible to use the local LTE 800/1800/2600 bands.
I think the first thing we have to find out is whether the hardware is capable of using other bands than the 1900 band listed on the Motorola website. As Loader009 states he could see LTE carriers which are known to use different bands I assume the hardware can do it. Otherwise the carriers wouldn't have been listed, right? Maybe someone from another country with different frequency bands can check and confirm that he can see those carriers as well?
Thus, the limitation to the 1900 band should be software-made and could be modified by a developer. I hope someone can participate at that point as I don't know much about coding...
I'm using CM10.1.
I can't remember the secret phone code, I have to do research again.
This secret phone code only works on Stock ROM. (I stupidly deleted it, when it wasn't working on CM10 anymore.)
The one secret phone code I used to force "LTE only" was *#*#4636#*#*.
Please DON'T change the baseband (don't even tap on it).
This can do problems to you. (I had to use QPST to recover the supported frequencies.)
Also, developers (afaik) can't modify the modem firmware.
We also don't even know, which LTE bands the Photon Q is capable of. (Except 1900 MHz)
I've got my 32GB SDCard back and will test it in the next few days out.
I hope I'll find that secret phone code, I'll also make a few screenshots.
Got the code!
##33284# <- ##DEBUG#
It only works on stock afair!
I'll test tomorrow, it's about 3am now >.<
disablewong said:
Dear All,
I recently got this device in Hong Kong and is hapi with its performance!
But I am still wondering if this device could actually use the LTE available in HK?
I knw the msm8960 claimed to be capable of utilizing all frequency of radio,
so is it possible that there is some soft lock in the baseband?
Could i flash the baseband or replace the modem driver from other device to access other frequency?
any idea is appreciated!
Thanks!
Vasco
Click to expand...
Click to collapse
I have read the "QU_SnapdragonS4_White_Paper_FNL_Rev6.pdf" and found there following entry:
-----------------------------------------------------------
• Industry’s first fully integrated 3G/4G world/multimode LTE Modem: <<<Supports all of the world’s leading 2G, 3G and 4G LTE standards>>>.
It also includes integrated support for multiple satellite position networks (GPS and GLONASS) as well as short range radios via Bluetooth,
WiFi, FM and NFC.
• Designed for speed, compatibility and power savings:
Snapdragon S4 Processor MSM8960 chipset includes the industry’s only complete platform that integrates all of the world’s leading 2G, 3G and 4G mobile broadband modem technologies on a single chip. This new integrated multimode modem is based on an advanced, programmable architecture that is performance, size and power optimized for the fastest combination of modems available for:
- LTE FDD/TDD (Cat3)
- 3G (DC-HSPA+ Cat 24)
- EV-DO Rev. B
- 1x Advanced
- TD-SCDMA
- GSM/GPRS/EDGE NFC.
Multimode/Multiband Means Worldwide Coverage.
• Support for multiple radio frequencies: Mobile broadband technologies are growing increasingly complex in their implementation. LTE is currently being implemented in over 40 diff erent radio frequency bands throughout the world. To complement its wide range of modem standards supported, Qualcomm has designed the Snapdragon S4 Processor MSM8960 CHIPSET platform to <<< address all commonly-used frequencies (from 700–2600 MHz) and bandwidths up to 20 MHz>>>, allowing its customers to address any mobile network opportunity whether the simplest single frequency implementation to the most extensive multi-frequency global mode, whether 4G, 3G or 2G.
-----------------------------------------------------------
Based on the document the chip can handle all LTE Standards, but it depends on his "advanced, programmable architecture"....as written there and how Motorola / Sprint implemented this, maybe they reduced LTE only to one Standard.
I don't have LTE in my area and so I cannot test this.
That's possibly right.
Something else:
If I remember correctly, somewhere in this forum have been said that for CDMA the internal Sprint "ID"(?) is used.
Maybe that's also the reason why I cannot connect to LTE in my area.
The phone is trying to "login" with the Sprint ID and this of course won't work.
The ##DEBUG# menu wasn't helpfull. It shows frequencies for american standards and not for GSM/WCDMA.
Also the LTE menu is also not very helpfull, it doesn't show frequencies at all.
Any News on this topic?
Maybe one of the developers can give a statement?
Yesterday I tested a LTE compatible SIM card.
My Bro has a Samsung Galaxy S4 with 4G/LTE in my area.
So I've put his SIM-Card into my Photon Q and set LTE only.
I had no luck, the Phone couldn't register into the network for this SIM.
I guess either it has the wrong frequencies or LTE is for inbuilt "SIM" (Sprint SIM?) only.
The latter. LTE is configured only for 1900 MHz which Sprint uses.
LTE is configured only for Sprint's frequencies, however, it supports the United States frequencies of PCS blocks A-G. The G Block is Sprint's current LTE channel, and they may deploy it later on Blocks A through F, depending on if they own the spectrum in a given market. The reason you see EU networks when the phone is in LTE Only Mode is most likely because the Phone still sees GSM signals, but will only connect to LTE ones from those GSM signals. Likewise, in the US, if you force LTE Only and then search for networks, AT&T and T-Mobile US will come up as the GSM carriers the Photon Q sees, rather than the LTE signals it sees.
Setting the Photon to LTE Only will not do anything for LTE in the EU. I suspect that if another carrier in the EU uses the 1900 MHz for LTE, the Photon Q will have no issues connecting to LTE in Europe. But until that time, be happy with HSPA.
Skrilax_CZ said:
LTE is configured only for 1900 MHz which Sprint uses.
Click to expand...
Click to collapse
Can this configuration theoretically be changed / other frequencies be added?
Only if you break BP security.
Skrilax_CZ said:
Only if you break BP security.
Click to expand...
Click to collapse
Sorry, what's that?
IIRC The only place with 850mhz LTE available is the Chicago market and currently no phones at all support it. :crying:
Not only does your phone need to support it, your PRL and cell-site does too...
I'm looking at the P 6000 and the P 7000. Both look like great phones, but neither has the US LTE bands. These phones have LTE bands 1, 3, 7 and 20 . None these are used in the US.
I'm pretty sure the MTK SoC can use a lot more LTE bands. Why aren't they enabled?
sean
Doesnt support T-Mobile
Yeah I was considering getting a P7000 price was great but none of the Elephones support any of T-mobile 4G bands so no use getting one.
So ordering another Oneplus One instead.
I'm surprised that they have band 20, cause not many countries use it (Germany does) so not many manufactors include band 20, like Moto Maxx doesn't have 20 on it.
As the title suggests, if a phone is listed as FDD-LTE 700MHz compatible, would that imply it'll work on T-Mobile's 700MHz Band 12? I am often confused with this band as it seems there's various other bands within the 700MHz frequency. So there's no positive way of knowing if it supports the band 12. For instance, I've been looking to find a cheap alternative phone (from China mainly) that might have support of LTE 700MHz so I can take advantage of T-Mobile's latest band, but I'm not sure on if it'd work. Couple examples of some phones are here:
http://www.aliexpress.com/item/Original-Foxconn-Infocus-M2-Phone-4G-LTE-FDD-Qualcomn-MSM8926-Quad-Core-Android-4-4-4/32323996202.html
http://www.aliexpress.com/item/Original-Iocean-M6752-4G-FDD-LTE-Mobile-Phone-MTK6752-Octa-Core-5-5-Inch-1920X1080FHD-3GB/32297288429.html
http://www.aliexpress.com/item/Original-Huawei-Ascend-Mate-2-Unlocked-4G-FDD-LTE-Android-Mobile-phone-Quad-Core-IPS-HD/2043526871.html
That's just 3 out of a list of them found on Aliexpress. They all say FDD-LTE 700MHz. My gut is telling me the 700MHz it lists is for some frequency that China uses and wouldn't make a difference if used in the US. Just needed some helpful clarification. Thanks.
brian117 said:
As the title suggests, if a phone is listed as FDD-LTE 700MHz compatible, would that imply it'll work on T-Mobile's 700MHz Band 12? I am often confused with this band as it seems there's various other bands within the 700MHz frequency.
Click to expand...
Click to collapse
It won't. Most probably not, anyway.
When a frequency is listed as "700MHz", it's actually an approximation. For example, T-Mobile's band 12 is 700MHz Block A, which is 728–734MHz, whereas Verizon's band 13 is 700MHz Block C, which is 740–746MHz. This might vary from region to region too.
Most likely the phones you're looking at are compatible with 700MHz band 28, since this is commonly used in SE Asia and Oceana, along with the other bands they're listed to support. The Ascend Mate 2 you linked to however appears to support band 17 700MHz, which is an AT&T band, which would make sense as it also supports band 4, common in North America.
If you want a cheaper phone that has band 12 support, the newer ones from T-Mobile support it (or will, with a software update). Galaxy Avant, ZTE ZMax, the upcoming LG Leon LTE, for example.
Planterz said:
It won't. Most probably not, anyway.
When a frequency is listed as "700MHz", it's actually an approximation. For example, T-Mobile's band 12 is 700MHz Block A, which is 728–734MHz, whereas Verizon's band 13 is 700MHz Block C, which is 740–746MHz. This might vary from region to region too.
Most likely the phones you're looking at are compatible with 700MHz band 28, since this is commonly used in SE Asia and Oceana, along with the other bands they're listed to support. The Ascend Mate 2 you linked to however appears to support band 17 700MHz, which is an AT&T band, which would make sense as it also supports band 4, common in North America.
If you want a cheaper phone that has band 12 support, the newer ones from T-Mobile support it (or will, with a software update). Galaxy Avant, ZTE ZMax, the upcoming LG Leon LTE, for example.
Click to expand...
Click to collapse
Thanks, that is exactly what I thought. I understand the phones from T-Mobile will support the new band but I was looking for maybe possible cheaper alternatives than brand name phones to take advantage of it. I haven't heard of the LG Leon though, I will check that out. Thanks for the kind reply. I was expecting some "lol no dumbass it won't work" reply as this in General discussion.
brian117 said:
Thanks, that is exactly what I thought. I understand the phones from T-Mobile will support the new band but I was looking for maybe possible cheaper alternatives than brand name phones to take advantage of it. I haven't heard of the LG Leon though, I will check that out. Thanks for the kind reply. I was expecting some "lol no dumbass it won't work" reply as this in General discussion.
Click to expand...
Click to collapse
The Leon isn't out yet, and only vague specs are available. No specifics on what the processor is, but I'd guess SD400 or 410. I'd expect it to be around $200-250, but that's just a guess. If it's more than $250, I'd say it's not worth it considering the low-res FWVGA screen.
It also occurs to me that the new 2015 Moto E LTE has band 12 support. 64bit Snapdragon 410, 1gb RAM, 8gb storage, microSD slot, qHD screen, and a relatively large battery. Honestly, I'd rather have this than either of those cheapo Chinese ones (yes, I know Motorola is Chinese now...). For $150 from Amazon, it's a pretty damn good deal.
Hello everyone. As many of us first posters here, I have a problem:
I've bought an north american J327U from someone I know, and that person only used it at home with their wi-fi. It's got an Exynos chipset, and no support for the LTE bands from where I live in (which are completely different from the USA's LTE bands).
After quite a bit of research, I found here and elsewhere methods to change LTE support for Qualcomm devices, but had no luck finding any for Exynos devices. Is there any way to do the same thing for devices with Exynos chipset, or am I stuck with no LTE? I also know it deppends on the hardware support for that, in my case I would need support for bands 3 (1800mhz), 7 (2600mhz) and 28 (700mhz). The phone covers none of those.
My device is not yet rooted, but I'm fine with doing so if needed.
Thanks in advance for any help.
I don't think you can physically change the bands unfortunately.