i ordered infotm x220 the device is nice but my big problem is language support.
before i place my order i asked seller can i write with arabic language ? he said no but you can read only, so its ok for me then i paid. when i tried to open arabic web site i can't read anything because the device can't recognized the language ! i contact the seller and asked him about this problem then he said this system already installed multi language except arabic and Thailand !!! so if you want we can send arabic pack to you but there is a problem the only language you can use on the device is arabic, so you can't read or write any other languages like english
Now i am so sad, i don't know what can i do for this ??
my device info is :
Model number : deb
Firmware version : 2.1-update 1
Kernel version : 2.6.32.9
Build number : deb-2.1.1170
please experts HELP HELP HELP ...
THANKS.
finally now i can read and write Arabic language ...
Follow me !! ..
1- Download the rar file from Attach Files.
2- Unrar it.
3- move the unrar folder to your SD card.
4- install this three programs :
UniversalAndroot
RootExplorer
SuperUser
5- after finish install the programs click on UniversalAndroot and press root.
6- after root is finish exit and click on RootExplorer (SuperUser will ask for allow choose allow)
7- after finish steps above your device ready for editing !
8- now click on RootExplorer and go to the unrar folder open fonts folder and copy this file DroidSansFallback.ttf and paste it in system/fonts
9- copy this file DroidSans.ttf and paste it in system/fonts too !
10- now go back to to the unrar folder open lib folder and copy this file libwebcore.so and paste it in system/lib
11- exit from RootExplorer
12- open UniversalAndroot
13- select unroot
14- after finish exit
15- go to market and download Ibrahim keyboard and enable it from setting.
16- restart your device and enjoy !!!
POST 2-
*********** DISCLAMER *************
I AM NOT RESPONSIBLE FOR ANY BRICKING, DEATH SD-CARD, DEATH OR MESSING YOUR MOBILE, FOR BEST FOLLOW STEPS ONE BY ONE AND CAREFULLY.
YOU ARE DOING AT YOUR OWN RISK.
ACCEPTED - ✔ GO FORWARD :fingers-crossed:
NOT ACCEPTED - ✖ BYE BYE .
****** END OF DISCLAMER *******
HEY GUYS WATS UP??? HOWS YOUR NINJA 4. :victory:
IF YOU GET BORED OF SAME BOOT ANIMATION AND NO SOUND and WANT TO CHANGE IT :cyclops: , THEN YOU REACHED AT CORRECT CORNER . IF NOT GO SOMEWHERE ELSE :good:.
REQUIREMENTS -
1. ROOTED
2. APP- ROOT BROWSER , TERMINAL EMULATER.
3. SCRIPT - bootsnd.sh
4. FILES - bootanimation.zip , boot.wav , android_audio.mp3 :: LINUX IS CASE SENSITIVE SO FILE NAME SHOULD lowercase :: :angel:
STEPS -
1. Download bootsnd.sh.txt ( rename it to bootsnd.sh ) , bootanimation.zip , bootsound.zip and put it on root of your sdcard. "/sdcard", now extract " bootsound.zip " in sdcard. NOW YOU HAVE THREE FILES - bootanimation.zip , boot.wav , android_audio.mp3.
2. open terminal emulator (download from google play store, its free) , and type following code -
su
cd /sdcard
sh bootsnd.sh
> if everything will be fine it will not show any output, if error coming or showing message -
" no such user root:shell "
IT IS FINE NOW, CLOSE TERMINAL.
3. OPEN ROOT BROWSER (R/W) THEN CHECK FOLLOWING FILES & make sure the file has transfered over-
1. init.local.rc | /system/etc/init.local.rc
2. bootsound | /system/bin
4. If files are present then it means script run successfully. otherwise run it again.
5. now copy the bootanimation.zip (replace the old one) , boot.wav , android_audio.mp3 from your sdcard to /system/media .
6. reboot and watch.. :laugh:
NOTE -
1. bootsound depends upon boot animation , if bootanimation is of 15sec, then boot.wav , and android_audio.mp3 sholud be of 15 sec.
2. if you want to change sound then boot.wav , android_audio.mp3 should be of same sound file.
for example - i want to make smackthat.mp3 to boot sound then
smackthat.mp3 = android_audio.mp3 (rename)
smackthat.mp3 = boot.wav (convert .mp3 to .wav usin converter tool, and name it to boot)
I HOPE YOU ALL UNDERSTAND.
I DON'T CARE FOR THANKS BUTTON, IF LIKED HIT IT OTHERWISE ITS OK. :good::laugh:
I JUST WANT TO HEP YOU GUYS, THAT'S MY MAIN MOTTO. :victory:
Thanks....looking awesome
Hey sorry to say but its good to have some low size bootanimation.zip and shutdownanimation.zip files there in system/media/ folder.
Because they takes about 14mb of space.
REPLY TO -
manjifera said:
Hey sorry to say but its good to have some low size bootanimation.zip and shutdownanimation.zip files there in system/media/ folder.
Because they takes about 14mb of space.
Click to expand...
Click to collapse
yea i know, but if you want something good then you have to loose something....
hey man can u plz tell how to change shutdown sound?
also plz tell how to change battery charging sounds or charger connection sounds.
good work
i want intel animation
I tried this method for zenfone 5 A501CG (T00J). It does not work this way. Can You suggest some other method?
Phone has KITKAT version 4.4.2
Nikhil Hande said:
I tried this method for zenfone 5 A501CG (T00J). It does not work this way. Can You suggest some other method?
Phone has KITKAT version 4.4.2
Click to expand...
Click to collapse
This methods works for android Gingerbread... Soon I will post you some methods try it.
I performed same steps.All goes well.The reboot still not playing sound.Why?
adarshm4you said:
I performed same steps.All goes well.The reboot still not playing sound.Why?
Click to expand...
Click to collapse
Which device and Android are you on?
veer.killerboy said:
Which device and Android are you on?
Click to expand...
Click to collapse
Meizu M2 mini.Custom Lineage 14.1 0n 7.1.2.
adarshm4you said:
Meizu M2 mini.Custom Lineage 14.1 0n 7.1.2.
Click to expand...
Click to collapse
This trick was available for GB not for further androids, if it doesn't working its due to compatibility issue.
Hello all , i post my new guide to change icons without using apktool . This guide is for newbies though other all advance developer may think this useless or may be they known this a very ago.
# Note :-
1) This guide is for all newbies who want to edit there app icons , but dont have apktool or have no knowledge about it .
2) This guide is only applicable for system apps .
3) You should have knoweledge for flashing zips by CWM .
# What is needed ?
1) A must have computer with paint (opptional) [ some phones with Zarchiver app can be used . ]
2) WinRar
3) A flashable zip file supplied by other developer .
4) A icon Set which you want to replace with .
# Procedure :-
1) Make a directory called " stock " .
2) Paste your app in it .
3) Below i have taken SystemUI.apk.
4) Rename that app to SystemUI.zip ( just make .apk to .zip format )
5) Then go to options (press right mouse button) press Extract to SystemUI
6) After extracting go to the extracted folder " SystemUI"
7) Browse to res / drawable-mdpi / you will find all icons there . ( In my case its mdpi , it may be hpdi .)
8) Note that the resolution must be same or it may not look good . [ Expiremental ]
9) Replace the icon which you want to from your icon set .
10) Go back to folder where you will find folders like META-INF , res , & files like AndroidManifest.xml , classes.dex, resources.arsc .
11) Now select that all files and press the right button of the mouse ( the options button) .
12) Select the Add to Archive option .
13) Now keep the same name of the app you are modding and select " zip " .
14) A new zip file is created like " SystemUI.zip" . Rename it to SystemUI.apk ( just from .zip to .apk )
15) Now your modded app is ready .
16) Take the flashable zip provided by other developer .
17) open that zip and replace your file with his . ( in folder system/app/ " replace here ." )
18) Save the zip . And Flash it using CWM !!! Enjoy now you can see your modded icons .!!
I will post xml editing guide for newbies afterwards .
DOLBY DIGITAL PLUS
For Android 4.4.2x
(Two types of installation below)
Since this is a software, it should work on all Android tablet ( 4.4.2 and above ). Its ported from Lenovo Tab with demo video. This contains two types of installation 'one with custom recovery and other without custom recovery' . If you have installed other dolby, it may conflict. Don't use this mod for posting anywhere else or no editing. Links are given at the bottom.
***WARNING***1. BACKUP THE 'audio_effects.conf' into your SD card because may be you will need it later if you want to uninstall this mod. There are two paths for it. ( backup those two. )
located in the path /system/etc/'audio_effects.conf'.( this always exists and take a backup of this.)
located in the path /system/vendor/etc/'audio_effects.conf'. ( if this exists take a backup of this too.)
2. DO THIS AT YOUR RISK. ( I am not responsible for any damage ).
REQUIREMENTS1. Rooted android device. ( compulsory/important ).
2. Custom recovery if you have. ( not compulsory/important ).
3. Android tablet ( 4.4.2 or above ).
3. If you don't have custom recovery, then download 'ES file explorer' from playstore open it and given it permission of root with superuser. Steps below.
I-INSTALLATION STEPS
1] Install Without Recovery
1. Open ES file explorer
2. Go to left top and tap menu.
3. Go to the bottom to the tab 'tools' .
4. In the 'tools' tab, tap on 'Root explorer' and give permission by superuser.
Note :- whatever you paste ( the files of dolby ) , then you have to change that file's or folder's permission, ( only to be done after you paste each file and make each folders ).
Steps below :-
RULES FOR PERMISSION
RULE I :- ( for the files ) keep holding on the file you have pasted and go to 'properties' and tap 'change permission' , now tick all in the first column, in second column only the first to be ticked. Now tap 'OK' ( Note :- these are for the files you create or paste ).
RULE II :- ( for the folder ) same steps as above, now in the first column tick all, second column only the first to be ticked. In the third column all to be ticked. Now tap 'OK'. ( Note :- these are for the folders you create or paste ).
5. Now go to path /system/vendor/app. If that folder doesn't exist, then make a folder rename it to 'app', now change its permission. { Rule II } [ Follow the below step 7( I ) or 7( II ) ]
6. Make folders 'Ds' and 'DsUI', now change these folders permission. { Rule II } [( only if other apps are in each folders / if all the apps are mixed then skip this step )]
7( I ). Paste 'Ds.apk' and 'DsUI.apk' in 'app' and change their permission { Rule I } ( if other apps are mixed. Any doubt means feel free to ask ).
OR
7( II ). Paste 'Ds.apk' { Rule I } in the folder 'Ds' and 'DsUI.apk' { Rule I } in the folder 'DsUI' ( if other apps are in each folder ).[ Any doubt means feel free to ask. ]
[ If you don't understand the 6th and 7th steps. Give me a screen shot of your paths which I have given below, I will have a look at it and will clarify your doubt. ]
( Give screen shot of
/system/app ( give screen shot )
/system/vendor/app ( if exists give screen shot ) )
8. Go to path /system/etc/ and now paste 'audio_effect.conf' ( if already exists take a backup of, now paste the new 'audio_effects.conf' there. If you want me to edit your phones original audio_effects.conf, then upload it and I will add dolby to that for you, so that everything in your audio_effect.conf remains same. ) ( I will just add some lines there and it's still your audio_effect.conf. )
9. Change permission of that { Rule I }.
10. Same path ( /system/etc ) paste the file 'ds1-default.xml' and change its permission { Rule I }.
11. Go to path /system/vendor/lib ( if doesn't exist make a new folder, name it 'lib', now change permission { Rule II } ) and paste the file 'libstagefright_soft_ddpdec.so' and change its permission { Rule I }.
12. Go to path /system/vendor/lib/soundfx ( if doesn't exist make a new folder, name it 'soundfx', now change permission { Rule II }. ) and paste the file 'libdseffect.so' and change its permission { Rule II }.
13. Go to path /system/vendor/etc ( if path not available make a folder, name it 'etc' and change permission { Rule II } ).
14. In the above path, paste 'audio_effects.conf' and change the permission { Rule I }.
15. Now reboot your device and you have successfully installed.
2] Install With Recovery
1. Just flash Install file with your custom recovery.
2. Boot your device and have successfully installed.
II-UNINSTALLATION STEPS
1] Uninstall Without Recovery
1. Just delete the files you have pasted to install Dolby Digital Plus with ES File Explorer. ( only the files I gave )
2. Replace the audio_effects.conf with your backup and change permission as defined above. ( delete the one I gave you and paste there with your old one. )
3. Reboot your device and you have successfully uninstalled.
2] Uninstall With Recovery
1. Just flash the UNINSTALL.zip with your custom recovery. ( links below )
2. Reboot your device and you have successfully uninstalled.
Links :-
For Flashable Zip ( Install )
Version: 1 - test package
Version: 1.1 - package ready and working
Version: 1.2 - bug fixes
Version: 1.3 - fixed flashing issue = https://drive.google.com/file/d/0Bxfnl6OyqWXGdHhQejI3R2VNS2M/view?usp=drivesdk
For Flashable Zip v-1.1 ( Uninstall )
Version: 1 - test package
Version: 1.1 - stabilized and working
Version: 1.2 - fixed flashing issue = https://drive.google.com/file/d/0Bxfnl6OyqWXGNUJnLWt1RkFfMWM/view?usp=drivesdk
For Method Without Flashing
https://drive.google.com/folderview?id=0Bxfnl6OyqWXGNW42Vkw4ak9OUEk
XDA:DevDB Information
Dolby Digital Plus for Tab ( Android 4.4.2x )
Contributors
mdmaher
ROM OS Version: 4.4.2x Kitkat and above
Version Information
Status: Stable
Created 05-06-2016
Last Updated 15-07-2016
Thanx
rareguy said:
Thanx
Click to expand...
Click to collapse
Hope it worked for you.
Can this be used on a custom 4.4.x ROM for phone?
It's a galaxy S2 running miui v5.7.3 (rooted and selinux permissive). Also, can it be combined with viper? I know this is a bit late. But any reply is appreciated. Thanks!
Download Invicta OS Bootanimation for Your Device
We all Love Invicta OS bootanimation, Right ?
I have Done Alot Of Hardwork And Made It For All Of US
Please Press The Thank Button And Give me 5 Star Rating it would help me alot
How To Do That
STEP 1 :-
Download The bootanimation.zip File Below :-
If You Have Phone With 1080p Resolution - Download Here
If You Have Phone With 720p Resolution - Download Here
STEP 2 :-
Open File Explorer (Root Supported)
Recommended - MixPlorer - Download
Step 3 :-
Copy the bootanimation.zip File You Downloaded
Goto Root > System > Media
You will Find A bootanimation.zip File there
Rename It to bootanimation.zip.bak
Now, Paste The bootanimation.zip File That You Have Downloaded Now
Select The bootanimation.zip File Go To Properties Set The Permissions AS RWRR - Owner | Group | Others
Read tick tick tick
Write tick
Execute (Blank means Not Ticked)
RESTART YOUR DEVICE
IF You Want Your OLD bootanimation Back
just Delete The New One And Rename The Old bootanimation.zip.bak to bootanimation.zip
:good: PRESS THE THANKS BUTTON IF I HELPED YOU YOU CAN ALSO GIVE ME 5 STAR RATING :good: