hello to 1 and all , I have just bought a double din dvd player , reading thu some of the different post , I find out the one can update or even change the os on the device itself. now I have a no name brand 2din, it does not say anywhere what os its running, my question , how can I find out what os it has for me 2 do an upgrade on it , if possible, its has a 2 SD card slots and a usb, GPS yes but I do not have the software for it.
please guys id really like to make this happen , it has a really bad looking interface, mp3 player is horrible as well, can only see current song that playing , have to go two steps back to chose a song ...... an so and so on.
my e mail address is : [email protected]
tips,links will be much appreciated
Hi, thank you using XDA Assist. Without knowing what brand device you have it's impossible to give you much advise. Does it have a "settings" somewhere where you can see the device name and os it's on?
Thread closed.
Related
Hi all,
I got one of these GPS units: http://www.satmap.com/ - it is obviously a Windows powered device so I was wondering if there was any interest in playng with it on this forum? I don't think we are gonna start hacking the firmware on it but I cann see things like changing boot screeens etc as useful.
Anyone else got one?
R
SATMAP Active 10
rakh1 said:
Hi all,
I got one of these GPS units: http://www.satmap.com/ - it is obviously a Windows powered device so I was wondering if there was any interest in playng with it on this forum? I don't think we are gonna start hacking the firmware on it but I cann see things like changing boot screeens etc as useful.
Anyone else got one?
R
Click to expand...
Click to collapse
I've got one. I don't intend to play around with it. I'm getting a garmin oregon 400t.
It is a stripped out Win CE device, only the basic parts needed to run the active10 application are installed, it is a very good device for Topo mapping, but I really don't see much point in hacking it - if it goes wrong you will have a very costly new addition to the doorstop devices in your house - Mike
SatMap Error
Hi Guys
I have a strange problem with my device. I hav charching a POI gpx File and now the file is always in use. I cant delete the file. I can reset all settings but the file stay. Have somone a ide to connect via usb to the device.
I need to delete this file
Many thanks for all idees
Kind regards
Röni
Hi everyone,
I have recently bought two (what i thought were) HTC Touch Diamond2. It turned out to be a generic chinese made 5358+ model phone, but it's still very cool and has all the cool features. One phone is now dead after a failed ROM update on it. I have extracted the RAW rom from the WORKING phone using PDOCREAD
237.38M (0xed60000) MSFlash
| 1.75M (0x1bf000) Part00
| 3.38M (0x360000) Part01
| 60.38M (0x3c60000) Part02
| 171.88M (0xabe0000) Part03
and now have the corresponding 4 RAW files to match above.
I want to write these back to the second phone, which i now have up and running using a Chinese version of a ROM for a T5353 running WM6.1, so I cant read anything, but i can get it connected via ActiveSync.
If i try and write the RAW files back using PDOCWRITE, i get a
ERROR: ITWriteDisk - The media is write protected.
error message, which Im assuming is because the phone is NOT CID unlocked.
so where to from HERE? How can i compile the RAW files into a compatible the BIN file (in this case called K3IMG.BIN)
OR
How can I supercid the phone to enable writing using 'pdocwrite'
Ive tried everything guys, really looking forward to you help.
Thanks!
one more thing..
post deleted.......
Problem Solved
A lovely lassy who is an agent for the company that makes the cloned HTC Touch Diamond2 5358+ organised a rom file from the manufacturer for me - which was rather awesome!
So, if anyone is looking for en ENGLISH WM6.5 ROM for the 5358+ then please drop me an email, I'll shoot it through : [email protected]
Download link for English ROM file 5358+ WM6.5
Hey everyone,
I finally got around to uploading this to rapidshare:
so the address is
rapidshare. com / files /381413600 /5358__WM6.5_English_with_Zoom_Bar . zip
(remove the spaces)
Includes text file on how to flash (SD method)
Note: This is for the clone of the HTC Touch Diamond2 (5358+), includes GPS and G-Sensor capability.. if this isnt ur phone - download and install at ur own risk!
Its worked perfectly for me.. cant make any promises for you....
Hope it helps a few of you out, i got a LOT of emails from people who needed it - i seem to be the only person the factory has ever released the ROM to LOL... not anymore!
Mark.
bloogoo said:
A lovely lassy who is an agent for the company that makes the cloned HTC Touch Diamond2 5358+ organised a rom file from the manufacturer for me - which was rather awesome!
So, if anyone is looking for en ENGLISH WM6.5 ROM for the 5358+ then please drop me an email, I'll shoot it through : [email protected]
Click to expand...
Click to collapse
can u please ask to that agent if they can give to u a t3238+ english rom for k3 clones?? a lot of people need this (include me).
pd: I will post that link without spaces
http://rapidshare.com/files/381413600/5358__WM6.5_English_with_Zoom_Bar.zip
thanks for that Beastworm
Ive just sent her an email, will let you know the outcome...
thanks ....
still no response?
hey beasty,
no go on the 3238+ sorry mate, ive spoken with her directly online and they didnt have one they'd give her for that model... sorry it took so long to find out..im guessing uve tried all the dl's for the 3238+ listed on this site without success.. will have a hunt of my own for you and let you know if i come up with anything.. send me an email directly so i have your address.. [email protected] if you like.
Hi. i did get the file and managed to install the bin file.
the phone boots with the new windows, but the screen collours are a bit funny.
they are so dark and i cannot see almost anything.
Do you have another image that i could try or a new bin file?
also how can i install a rom to my phone (t5358+) since i am lost in the forum.
bloogoo said:
no go on the 3238+ sorry mate, ive spoken with her directly online and they didnt have one they'd give her for that model... sorry it took so long to find out..im guessing uve tried all the dl's for the 3238+ listed on this site without success.. will have a hunt of my own for you and let you know if i come up with anything.. send me an email directly so i have your address.. [email protected] if you like.
Click to expand...
Click to collapse
thanks, but i will still search for it. But if u found something for K3 processor, is better to send me a pm in the forum, or post it into the 3g touch subforum.
someone please?
Could someone tell me how to Hardspl the T5358+.
i am trying to follow the instructions from the forum on how to hardsppl the phone so i could install a new rom, but no luck.
any ideas?
This is a clone device, not a real one, there is no Hard SPL
Ok and how do install a ROM (not a bin) to the phone?
binary_vortex said:
Ok and how do install a ROM (not a bin) to the phone?
Click to expand...
Click to collapse
The bin is a ROM
How many T5358+ is out there, I mean, here, on XDA?
Hey Bloogoo, all,
I'm trying to figure out if 5358+ compatible with 5353 and 5355 firmware.
And even if not - I would like to know what other firmware is out there for our phone. Looks like some CO2 ROMs with Android started to show-up!
I've got 5358+ couple months ago and generally happy with it. So far I did not had a single crash or lockup. Battery life is fantastic compare to any other smart phone I ever owned.
My firmware is strange, that it's 6.5, but has old Internet Explorer. IE has no finger scrolling but only scroll by side bar. Another strange thing: zoom bar only works in picture viewer. I can't find another single app that can recognize zoom bar. G-sensor is very slow, It takes about 4-5 seconds to flip the screen and no other software can see it either. Other than that it is rock solid and works great.
Originally I've ordered 5355, but received 5358+ instead. The guy who sold it insists it's the same phone. Reading bits around this forum it certainly looks like it. But somewhere I've seeing mentioning that difference is the display. My posts on main thread for "CO2" left unanswered, looks like most of "CO2" phones out there are 5353s and 5355s. Under battery compartment it looks different too. And mic is in different spot. (5358+ has it on dead center, just like original BD2).
Why don't we start with posting our ROM versions?
Mine T5358+:
ROM Version R2517.7 Eng
ROM date 1/15/2010
Radio 1.07.9235
Protocol DV3.0
CPU reported MSM7200A (actually HiSilicon)
Model No. NEXPERIA SY.SOL 5209
Cheers yall!
T5358+ CONFIRMED. It is T5355 ROM compatible.
I feel lucky last Sunday. I've tired to ask about T5358+ and start flashing with different firmware (yes, risking to brick it). Every single T5355 ROM I've tried works fine. Most T5353 works as well, but some got stuck on boot splash. None of ROMs has zoom bar working, but I don't care for it.
The one in post #5, just as binary_vortex have mentioned, works, but colors are screwed-up, probably inverted. Firmware reported as :C02.001.09 from 3/02/2010. Mine T5358+ has R2518.7 Eng from 1/15/2010. It rings the bell with some info I've read on Mobile Uncle (with Google Translate) that 5358+ come with two different screens.
There are some very nice Chinese ROMs out there with WM 6.5.x and fully functional Manila. I'm yet to find same kind with English.
I actually like 6.1 better than 6.5. It feels snappier. For example G-sensor flips the screen in a fraction of a second where on 6.5 it takes over 3-4 seconds. Don't know if 6.1 is easier on battery.
Android ROMs start popping-up for 5355, but I'm yet to figure out how to install them or find one that already packaged. If anybody know - please post here.
Above is the info I was looking for a while and I'm posting it in hopes that it can be useful to owners of T5358+ who does not know where their phone fits in CO2 lineup.
Cheers yall!
hi.
thanks for confirming my problem!
will you be able to tell us where to find the roms in bin format?
Actually, which one is the less problematic for the T5358+?
You may want to take this out of Q&A to avoid it being closed as the original Q has been answered, i would post a new thread in Upgrading and Unlocking
Hi all !
I opening this new thread ( sorry if I have used the wrong section but I really don't know which one is the good one ! ) because my car got a multimedia software base on microsoft windows mobile to handle bluetooth phone connections and usb media player songs...
Now this is based on windows mobile indeed the updates files are in .cab form but as very often happens with the old windows mobile this software has many bug..so I was wondering if it could be possible to open the software to try to fix some bugs...
If anyone wants to give me an hands I can pass the systems files...
Nice idea.
Some blue and me service does not work, i never read a SMS on blue and me.
This software can be a great application with help
I know but we need someone to help open it !
it seems that official updates 5.5 solved some bugs ...anyway it woudl be better to open it ...but still I really don't know how to do it ..I should need a professional hand !
Hi all,
I use this topic to ask a question :
I have blue&me on my new punto evo, but it only works with flash drive, when I connect my phone (Xperia Arc configurated as USB mass storage MSC) my phone's just charging, nothing else happens and then nothing works, even flash drive.
I have to unplug the battery for one minute to reset the system, and then flash drive works.
Is it a known issue, could somebody help me ?
Thank you.
PS: Escuse my english, i'm french
hi guys, i buyed a SGT 3 days ago.
The gadget is amazing, but i can´t find two apps, searched
in market, google and here.
I failed to get one.
So i ask for help.
APP 01:
To watch divx,mkv with srt subtitles likes:
Movie.mkv
movie.srt
but, this files are on a PC, so i want to watch over wifi.
a plus to this app is to be free and to listen mp3 music over wifi too
APP 02:
to put livewallpapers randomly over time or one in home screen 1 another
on home screen 2 and go on...
i hope you guys can give me some tips.
Thanks,
My SGT is from Claro Brazil, not rooted.
Acheroniano
Acheroniano said:
hi guys, i buyed a SGT 3 days ago.
The gadget is amazing, but i can´t find two apps, searched
in market, google and here.
I failed to get one.
So i ask for help.
APP 01:
To watch divx,mkv with srt subtitles likes:
Movie.mkv
movie.srt
but, this files are on a PC, so i want to watch over wifi.
a plus to this app is to be free and to listen mp3 music over wifi too
APP 02:
to put livewallpapers randomly over time or one in home screen 1 another
on home screen 2 and go on...
i hope you guys can give me some tips.
Thanks,
My SGT is from Claro Brazil, not rooted.
Acheroniano
Click to expand...
Click to collapse
i would like to help u but i got no idea
the reason i replied is :
why u bought the galaxy tab 7.1 and didn't wait for 10.1 ? ?
i love my tab its ok . but sure i'll to use honeycomb .. why did u do that ?
Hi Kosh, i buyed primary by the price, i have paid less than 320 US$ here in Brazil, from CLARO.
and was a nice valentine´s day gift to my wife too.
you know..
Good Gadget >>> Good Sex ha ha ha
Well if you can share some other tip i´ll thx in advance
APP01 might want to check TvMobili/Fuppes on PC + UPNPlay on tab. Not sure if working for external subtitle though.
Hello sir,
A few months ago I bought a smart device which was "y1 smartwatch" and now I am facing some problems with the smartwatch and I want to flash a new firmware to it and as I search I didn't got any stock firmwares for it.
Os:mtk52d
This is the only information I got to know till now.
The firmware somehow looks like as of dz09's. But mine is rounded. I had already tried once flashing the dz09's firmware with all versions of flashtool but it failed.
Plss help
the answer
Here are the files: drive.google.com/file/d/0Bwldou4jlfdINXg0Nmk2TTdBMmc/view
and here is the tutorial: youtube.com/watch?v=5qg_sVkda_g
Be careful! I also have this watch and I'm still afraid to flash that rom, but if you want to try it, let me know if it worked for you.
even i have the same watch y1 smartwatch, but it is MTK60D....i want to change clock faces....i tried a lot of methods but worked. gesture wake is also not working........any solution pls
y1 software problums
please send details of your watch if it matches with mine I will send you firmware
Hi, Have the same y1 watch, DM6162. Tried to swap watch faces in many methods. any suggestions?
I have the Y1. Not sure of the os type/no. most of the apps say connecting to network, updating . Update failed. Any ideas on how to update the apps ? Also I want to be able to change watch faces , any ideas how ?
Update on watch info
Ver k13-cob-y1-ips7789b0e-ydt-xsx-v06.378-20180521
Bbchip mt6261
Ms board k91
Build no. 2018/05/23 11:18
If this helps lol
Good days
I need a help my smartwatch y1 is invested how I do to arrange this or if they might help me
Thank you for his attention
did you find a solution?
have the same firmware and rom dates. i want to update my watch aswell
I got an y1 smartwatch from amazon
I put in an airtel 4g sim in it sometimes the call works correctly but sometimes it switches off itself
The zm entertainment doesn't work
The Facebook Twitter WhatsApp dont work
It does not have calculator or audio recorder
I also want to change the clockfaces any idea
It says version: W9M_1.0_COBSLW_LSSD_Y1_RQ_41_LX9307BOE_6153_6133_J_LANA_,V1.3.4
Diz9000 said:
I have the Y1. Not sure of the os type/no. most of the apps say connecting to network, updating . Update failed. Any ideas on how to update the apps ? Also I want to be able to change watch faces , any ideas how ?
Update on watch info
Ver k13-cob-y1-ips7789b0e-ydt-xsx-v06.378-20180521
Bbchip mt6261
Ms board k91
Build no. 2018/05/23 11:18
If this helps lol
Click to expand...
Click to collapse
hi there is a pc software call "smart china res", this can change your watch face easily,but i guess is paid software.need to google it the software.
Yeh, that might be your only hope if he still care's since posting in 2018?