Hello guys my other opo is totally bricked tried everything i need to reprogram it from scratches is there anyone familiar with QPST & Qfil i need a step by step instructions please don't tell me use Msm8974DownloadTool in color.zip cause that never worked with me the bricked phone is recognized to my pc and laptop as com port (Qualcomm hs-usb qdloader 9008) when press combination (vol +&power) the phone doesn't vibrate when pressing power and it doesn't show any signs that it is charging any help would be appreciated thank you
I started this topic so that anyone who can help can post their contributions here thanks for advance
Sent from my A0001
OP,
Please don't post questions in multiple threads. I've deleted this same question in the Help Thread, since you've made a thread here.
Thanks,
Darth
Forum Moderator
i really think that this may work
my drivers are wrong but it flashes at least
Related
first sry for my bad englich and open a new thread
i did this instruction:
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
step by step to unbrick my OPO but did not work :/
i installed the driver ok Qualcom HS - USB QDLoader 9008
but when i start Msm8974.exe tool One PC cant read the Phone and the other when i press start writes xxxSaharaxxx and don't load any files to my OPO
pls need help thx :/
By now I hope you have solved your problem. I had a similar problem yesterday with my phone. I was on a Window 7 computer and I tried everything. Somehow the system insisted my phone was a serial device instead of a USB device. I tried everything I could think of. I eventually gave up and put it on an XP box and was able to then finish the job of un-bricking it. Make sure your device is properly registered with the computer you are using. Good luck.
Kirlus said:
first sry for my bad englich and open a new thread
i did this instruction:
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
step by step to unbrick my OPO but did not work :/
i installed the driver ok Qualcom HS - USB QDLoader 9008
but when i start Msm8974.exe tool One PC cant read the Phone and the other when i press start writes xxxSaharaxxx and don't load any files to my OPO
pls need help thx :/
Click to expand...
Click to collapse
I have a Xperia S running cm 12.1 with unlocked bootloaders TWRP installed and i tried to partition my SD card [http://forum.xda-developers.com/showthread.php?t=2584759] but clearly something went wrong and now the phone wont boot. I made a lot of research and tried everything but all the guides require to be able to boot into flashmode . My phone is dead the only sign of life is a red led when its charging which after some hours of charge will shut off. When the light is off and the phone connected on PC, the PC can recognize the device on unspecified devices (QHSUSB_DLOAD). i have installed all the needed drivers from Sony, google drivers from sdk, and adb drivers(adb wont see the device and i tried everything to do so, but nothing seem to work). I got a market for android on my pc called mobogenie that when i connect the phone it detects that a phone is connected but wont see what phone.The hardware reset buttons work but its useless in the current position. Concluding, the phone is bricked and wont open in fastboot-flashboot-bootloader-TWRP, its recognized as a device but not as "Xperia s" i got all the drivers and i want to flash the original firmware (already downloaded) to fix it. A possible problem is that the partition table is destroyed and after the flash it will hopefully be restored. The problem is not on the hardware but on software. I tried to trigger the download mode with the Samsung way (USB jig, 300k ohm ) but nothing happened as expected. Every solution i found required flash mode which is not accessible at the moment and i tried lots of things to go into fastboot(ever the rubber band trick,remove the battery etc). PLEASE help i dont know what to do, please help me flash it (i already got flashtool, Emma) or anohter solution. Thanks for the help in advance. (its my first thread in the forum, i hope to post it on the right section, i posted it here because i need the assistance of the developers i guess)
Hello,
Welcome to XDA.
The XDA Assist forum isn't what you think it is. We merely assist by helping to point users with issues in the right direction for their issue.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/xperia-s/help?nocache=1&z=2025285740382969
The experts there may be able to help.
Register an XDA account to post and reply in the forums.
I Just attempted a root on my xt1060 vzn moto x and i think i hard bricked it. I was supposed to update the Qhsusb_dload drivers on my windows 7 yet i didn't find them. At this point my device was turned off an i had no way of getting it back on, no fastboot or anything. The green led light will light up when its plugged in and i hold the power button for a while. When i plug the usb and phone into the pc it will briefly show up as Qhsusb_driver in the device manager then switch to Relink HS USB QDloader 900. If there is any hope for my device and someone could share it that would be greatly appreciated. If someone could post a solution you are a lifesaver.
Maxim b said:
I Just attempted a root on my xt1060 vzn moto x and i think i hard bricked it. I was supposed to update the Qhsusb_dload drivers on my windows 7 yet i didn't find them. At this point my device was turned off an i had no way of getting it back on, no fastboot or anything. The green led light will light up when its plugged in and i hold the power button for a while. When i plug the usb and phone into the pc it will briefly show up as Qhsusb_driver in the device manager then switch to Relink HS USB QDloader 900. If there is any hope for my device and someone could share it that would be greatly appreciated. If someone could post a solution you are a lifesaver.
Click to expand...
Click to collapse
Hello,
You may try posting your query here Moto X Verizon Topics and Discussion forum, the experts there maybe able to assist you.
-Vatsal
Vatsal said:
Hello,
You may try posting your query here Moto X Verizon Topics and Discussion forum, the experts there maybe able to assist you.
-Vatsal
Click to expand...
Click to collapse
Thanks!
Hello friends, I have this beautiful paperweight since I tried to flash it and it was disconnected in the process, now it only recognizes it as: qualcomm hs-usb qdloader 9008, obviously with the corresponding drivers, I tried a tutorial; but as expected, being of another model is stoped down in the process, does anyone know any solution to this issue? thanks in advance
SoyJuanBustamante said:
Hello friends, I have this beautiful paperweight since I tried to flash it and it was disconnected in the process, now it only recognizes it as: qualcomm hs-usb qdloader 9008, obviously with the corresponding drivers, I tried a tutorial; but as expected, being of another model is stoped down in the process, does anyone know any solution to this issue? thanks in advance
Click to expand...
Click to collapse
I don't have this device but, it looks like the following thread should be helpful for what you need. Don't be afraid to ask for some member guidance.
https://forum.xda-developers.com/showthread.php?t=2960787
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
I accidentally flashed wrong .pit file and now my phone is totally dead. it means hard bricked no any response. but when i connect my phone in computer its shows as qualcomm hs-usb qdloader 9008(com6). It is also detected in odin but cant flash because i cannot enter in download mode and stucks in setup connection.
After that i did some research and found that other qualcomm devices like Lg lenovo can repaired. so i tried that way but i need xxxxfirehose_xx.mbn file and rawprograme.xml and patch.xml. but there is no any such file in samsung firmware. so gyz anyone can help me here to get those files.
Also if someone has this phone please create debrick.img and send me. i will try using Sd card.
bezay said:
I accidentally flashed wrong .pit file and now my phone is totally dead. it means hard bricked no any response. but when i connect my phone in computer its shows as qualcomm hs-usb qdloader 9008(com6). It is also detected in odin but cant flash because i cannot enter in download mode and stucks in setup connection.
After that i did some research and found that other qualcomm devices like Lg lenovo can repaired. so i tried that way but i need xxxxfirehose_xx.mbn file and rawprograme.xml and patch.xml. but there is no any such file in samsung firmware. so gyz anyone can help me here to get those files. Also if someone has this phone please create debrick.img and send me. i will try using Sd card.
Click to expand...
Click to collapse
I don't have this device but, the following thread may be helpful for what you need and don't be afraid to ask for some member guidance within it.
https://forum.xda-developers.com/showthread.php?t=2136738
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.