With this Performance and Battery Tweak, any android device running Gingerbread (GB), Ice Cream Sandwich (ICS), Jelly Bean (JB), or even KitKat, can achieve the smoothest performance and the longest battery life. After you flash this mod, you can say your device works like a CHARM!
What's with Performance and Battery Tweak?
This mod tweaks the build.prop of any ROM. Below are the following it features:
*Full memory management with 5 different configs.
*Zipalign apps in "/system" at every boot, and apps in "/data" every 48 hours.
*CPU governors tweaks and improvements for better performance and battery life.
Increased SD Card read-ahead cache to 2048 KB to improve SDCard write/read speed.
*Nos entropy seeder generator engine used to reduce lags.
*Ad blocking.
*Battery life improvements.
*SQLite and database optimizing every 48 hours.
*Network TCP tweaks.
*Kernel, VM and sysctl tweaks and improvements.
*File system speedup.
*Build.prop tweaks and improvements.
Cleans log files and tombstones at every boot.
*Many other tweaks for better performance and battery life!
*Net booster tweaks
and many more
How to install Performance and Battery Tweak for ALL Android device?
Disclaimer: Flash at your own risk.
Before applying, make sure to have this:
Android Gingerbread, ICS, Jelly Bean, KitKat ( WORKS ON ANY ROM! )
*Required Specification-
1.Init.d supported (check it if you have already got the init.d support while rooting)
2.Root -
3.ClockworkMod recovery (4 or higher) or CWM-based recovery -
4. 4 MB of free space in /system
5. Performance and Battery Tweaks flashable zip
6. BACKUP YOUR ROM
How to flash?
1. Download the Performance and Battery Tweak.zip and put it to your phone's SD card.
2. Boot to recovery mode.
3. Optional, backup first if you don't have a backup. By using cwm or any method u want..
4. Install Zip from SD card.
5. Select and flash Performance and Battery Tweak.zip
6. Reboot normally and experience the smoothness!
HOPE I HELPED YOU..!!
Here is the link which would help you to guide to enable init.d support --
http://www.theandroidhow.com/2014/06/how-to-enable-initd-support-on-android.html?m=0
Note- use it only if you have not get the init.d support while rooting..
Here is the to download the flashable zip of performance and battery tweaks--
https://docs.google.com/document/d/1ccYeGvYnrPv3KviTnCF8KY5ieqnQUhuCKjHROq9m004/edit?pli=1
If the above link does not work then use the below alternate link..--
https://mega.co.nz/#!lkBWVbDD!jyyMQE1iamgW5g7u2hzeKOIr-4evFndlAxGdWSVpTHo
Credits---- Gaurav.. *-
How to uninstall?
pheol11 said:
How to uninstall?
Click to expand...
Click to collapse
Flash it in recovery.
Xperia M2 D2303 on K.K. 4.4.4
Lovenish Singh Panwar said:
Here is the link which would help you to guide to enable init.d support --
http://www.theandroidhow.com/2014/06/how-to-enable-initd-support-on-android.html?m=0
Click to expand...
Click to collapse
/etc/init.d support is already enabled in Xperia phones rooted with rootkitXperia (and I suppose the other rooting methods as well). The rootkit enables it because it is needed to disable the RIC at boot time. Also SuperSU uses it.
It's better to specify it because it may not be safe to run twice some init.d scripts.
^^^ I got that second time I flashed these tweaks.
Thanks
Xperia M2 D2303 on K.K. 4.4.4
Miche1asso said:
/etc/init.d support is already enabled in Xperia phones rooted with rootkitXperia (and I suppose the other rooting methods as well). The rootkit enables it because it is needed to disable the RIC at boot time. Also SuperSU uses it.
It's better to specify it because it may not be safe to run twice some init.d scripts.
Click to expand...
Click to collapse
Sometimes it dont.. I have faced that problem and probably others too.. So i just quoted the way.. I guess its not creating any problem right..??
Dzepar said:
^^^ I got that second time I flashed these tweaks.
Thanks
Xperia M2 D2303 on K.K. 4.4.4
Click to expand...
Click to collapse
Lovenish Singh Panwar said:
Sometimes it dont.. I have faced that problem and probably others too.. So i just quoted the way.. I guess its not creating any problem right..??
Click to expand...
Click to collapse
I know, it's confusing because each rooting method does it on its own way.
Let's say that it would be better to advise to check if /etc/init.d is already running before installing a second script which runs it. We never know what one is going to put in /etc/init.d , and some poorly made additional scripts are not made to be run twice. Also it keeps the system cleaner.
Ok.. Quoted it in the OP..
The download link does not work.
Sent from my D2403 using XDA Free mobile app
Matze6989 said:
The download link does not work.
Sent from my D2403 using XDA Free mobile app
Click to expand...
Click to collapse
Ok.. Use this one..
https://mega.co.nz/#!lkBWVbDD!jyyMQE1iamgW5g7u2hzeKOIr-4evFndlAxGdWSVpTHo
However that link is still working..
does this work with locked bootloader? i got the recovery and rooted
supertiger1234 said:
does this work with locked bootloader? i got the recovery and rooted
Click to expand...
Click to collapse
Yes, it works good on my phone.
Xperia M2 D2303 on K.K. 4.4.4
supertiger1234 said:
does this work with locked bootloader? i got the recovery and rooted
Click to expand...
Click to collapse
Yes its working.. Confirmed by DZePar
Related
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS ROM HAS CAUSED. FLASH AT YOUR OWN RISK.
NOTE: THIS IS ALL UNTESTED. THE MINUTE I FINISH, I UPLOAD. SO DON'T BE SURPRISED IF IT DOESN'T WORK.
This ROM is based on @cas_xp's, @dsixda's, @kalt_kaffe's, and @tkirton's work. A big "Thank You" goes to them.
Also a big Thank you goes to www.heylisten.org/ROM, the provider of the free hosting and the one(s) that made OTA possible. I will also be making a QR code to download it straight to your phone.
Info:
Android OS version: 2.2
ROM Name:tahahawa's U81XX Froyo Mod
Rooted (unsecured boot.img):YES
Rooted (Superuser.apk + su):YES
BusyBox installed:YES
BusyBox run-parts support:YES
DT's Apps2SD support (2.7.5.3beta04):YES
/data/app enabled:YES
Custom boot animation allowed:YES (Place in /data/local [will need to be re-signed])
Nano text editor installed:YES
Bash shell support:YES
/system/framework is deodexed :YES
/system/app is deodexed:YES (except for the htc ime)
ROM will wipe all data:NO
Zipaligned
Includes Wireless tether app (extra; not needed)
task killer tweak for speed
Maybe a couple of things I forgot
Download here and the update 1.3.8-1.4 here
First U8100/U8120/U8110 ROM that has OTA updates!!! WOOT!!!
Black task bar theme: http://www.gamefront.com/files/20139338/smalser.wt.zip
For those on Pulse Minis/U8110s and can't get network try the method here or follow my steps http://forum.xda-developers.com/showpost.php?p=12585608&postcount=255
For those on V845s/U8120s try @anryl's kernels over here
Quick tips for Pulse minis etc.: http://forum.xda-developers.com/showpost.php?p=12780180&postcount=301
To-do list:
1)Include Wifi fix
2)OC kernel
3)Darktremor's a2sd
4)Radio app
5)Calibration app
6)flash player inclusion? NOT POSSIBLE. REQUIRES ARMv7
7)Update System apps
8)fix D-pad light
9)De-odex
Change Log:
V1.3.8:-replaced launcher2 with launcherPro
-Edited task killer tweaked
-New boot animation
-Possibly better/updated OpenGL es driver?
-Edify scripting
V1.3.5:-Implemented OTA!!!
-New host for files
-Incremental updates will be started as well
V1.3.2:-Removed Titanium Backup and ROM Manager.
-Still waiting for OTA to be possible
V1.3:-Added Titanium Backup and ROM Manager.
-Updated ROM base to @cas_xp's wifi update beta3.
-Closer to implementing OTA.
V1.2.5 (name not changed in ROM):-A2SD patch created
-Experimental boot.img by @anryl released
V1.2:-Two versions, with or without A2SD
-The A2SD includes A2SD version 2.7.5.3 beta03
-Fixed update-script... again
-removed A2SD version, added support
V1.1:-Fixed update-script
-Changed name to "tahahawa's U81XX Froyo Mod V1.1"
V1:-initial release
Any ascend or m860 support?
S.I. 77
selfinflicted1 said:
Any ascend or m860 support?
S.I. 77
Click to expand...
Click to collapse
Unfortunately, no.
Installation
1. Flash a recovery image
2. Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
3. Choose "Flash zip from sdcard" and choose the zip you just copied.
4. Wipe data+cache before rebooting. You should wipe unless you are already on a Froyo ROM.
Swap:
To enable swap on partition 3 or partition 2 (it will check partition 3 first and if it doesn't exist it will try partition 2)
$ su
# sdswap.sh enable
$ su
# sdswap.sh disable
Compcache:
If you are using are already using a swap partition on your SD-card, then you most likely shouldn't enable compcache. But if you do not want to partition your SD-card then compcache can be a good alternative.
Read more about how Compcache works here: http://wiki.cyanogenmod.com/index.php?title=Compcache
Enable compcache
In a terminal or using an adb shell type this:
$ su
# compcache.sh enable
Type free to confirm you now have 32Mb swap
Disable compcache
In a terminal or using an adb shell type this:
$ su
# compcache.sh disable
Type free to confirm you now have 0Mb swap
Advanced users
Compcache size, settings and swappiness is setup in /system/bin/compcache.sh
If you are an advanced user, you'll know how to proceed from here...
Some questions before putting this on, since I'm always a noob with installing new ROMs...
1) Is this in a stable and smooth stage yet (with everything working properly) or is this still in developmental stages? What is the difference between this and cas_xp's?
2) I'm currently running The Celestial Teapot at 652mhz, will this be noticeably slower considering it doesn't have overclock (does it?). What's the deal in regards to overclocking?
3) I can install this fine (flashing it) over Kalt Kaffe's TCT ROM (replacing it with this one) or do I have to somehow get TCT off first?
Forgive me if my questions are nooby, I always prefer to overask (woohoo new word) in regards to ROMs
Whatever the case, thanks for working on this! Awesome (really) if it works perfectly, but even if not, I like seeing any development with U8100.
Unfortunately, it won't boot on huawei u8110.
I've tried to delete data/fatory reset, but it didn't help.
syrenz said:
Some questions before putting this on, since I'm always a noob with installing new ROMs...
1) Is this in a stable and smooth stage yet (with everything working properly) or is this still in developmental stages? What is the difference between this and cas_xp's?
2) I'm currently running The Celestial Teapot at 652mhz, will this be noticeably slower considering it doesn't have overclock (does it?). What's the deal in regards to overclocking?
3) I can install this fine (flashing it) over Kalt Kaffe's TCT ROM (replacing it with this one) or do I have to somehow get TCT off first?
Forgive me if my questions are nooby, I always prefer to overask (woohoo new word) in regards to ROMs
Whatever the case, thanks for working on this! Awesome (really) if it works perfectly, but even if not, I like seeing any development with U8100.
Click to expand...
Click to collapse
1)This is @cas_xp's but modded.
2)I haven't tested yet. But the previous version wasn't as laggy. I'm going to try to bring OC in. To reduce lag.
3) You should probably wipe before coming to this ROM . I should probably put a short flashing guide in.
atomicr said:
Unfortunately, it won't boot on huawei u8110.
I've tried to delete data/fatory reset, but it didn't help.
Click to expand...
Click to collapse
It will take a long time to boot for the first time. It is deodexed.
I left it for 5 minutes to boot. Do I have to wait longer?
OK. I'll try one more time.
edit:
No, rom doesn't boot neither after 10 minutes. It is stuck on my Movistar initial splash screen.
tahahawa said:
1)This is @cas_xp's but modded.
2)I haven't tested yet. But the previous version wasn't as laggy. I'm going to try to bring OC in. To reduce lag.
3) You should probably wipe before coming to this ROM . I should probably put a short flashing guide in.
Click to expand...
Click to collapse
So I will finally, after so long, have working 2.2 on my phone
Can't wait to try this...
atomicr said:
I left it for 5 minutes to boot. Do I have to wait longer?
OK. I'll try one more time.
edit:
No, rom doesn't boot neither after 10 minutes. It is stuck on my Movistar initial splash screen.
Click to expand...
Click to collapse
Too bad. I'm sorry it doesn't work. I haven't tested this myself, so I can't tell you if it is working or not. Thank you for testing.
works on u8150?
tahahawa said:
Too bad. I'm sorry it doesn't work. I haven't tested this myself, so I can't tell you if it is working or not. Thank you for testing.
Click to expand...
Click to collapse
Does this mean you haven't tested the rom at all and don't know if it works or merely that you haven't tested on the U8110 but have tested it on the U8100 only?
I assume the latter, but I'd rather double check
hachoo said:
works on u8150?
Click to expand...
Click to collapse
syrenz said:
Does this mean you haven't tested the rom at all and don't know if it works or merely that you haven't tested on the U8110 but have tested it on the U8100 only?
I assume the latter, but I'd rather double check
Click to expand...
Click to collapse
@hachoo no
@syrenz I haven't tested it AT ALL. I don't have access to my phone at the moment. When I do I will test it.
Does the problem about wifi existing on cas_xp's ROM still exists?
I mean, automatical rebooting when stopping wifi..
jack1245 said:
Does the problem about wifi existing on cas_xp's ROM still exists?
I mean, automatical rebooting when stopping wifi..
Click to expand...
Click to collapse
Any bugs in his ROM should also be in here. If and when I correct them I will post.
Yeah current bugs are: wifi on reboot bug, laggy rom,d-pad click, calibration, its a pain, but overall nice try tahahawa i think once you can test by yourself you will improve it a lot.
cyberghoser1 said:
tahahawa i think once you can test by yourself you will improve it a lot.
Click to expand...
Click to collapse
Agree.. and I will be waiting for that..!
Thank you for your effort tahahawa
First of all... Thanks Chainfire!!!! This is totally based on your work.... i made only some MOD....
Ok, the work is quite finished... the CF-ROOT for I9003 is ready!
I called this "beta version" (since i need your tests/opinions) but all might work.
IMPORTANT: This is only for KPH Firmware!!!
You can flash this over any other CWM or over the stock FW.
Many people will ask "Why i have to install this?"... because with this your phone will have:
- Root ( don't need to use SOC or any ZIP);
- Busybox 1.17.2;
- Sqlite3 v3.7.2;
- init.d support (you can put in the folder /system/etc/init.d all the script that you want to be loaded at the startup);
- New fixed CWM ( unyaffs issue has been fixed - offline charge fixed - USB storage mode while in CWM fixed);
- Add EXT4 support to the phone ( so you can convert the filesystem to ext4 to improve performance);
- full working CWM Manager (backup - restore - delete backup - install apk - flash update.zip - flash kernel - reboot to CWM);
- Tweaks Manager with various tweak ( Ram Min Free - SD Speed - I/O Scheduler - Kernel Scheduler - CPU Conservative Governor - Swappiness - Ram Script by Juwe11 - Media Stagefright)---> Many people asked for Juwe Ram Script ---> to enable it completely choose in the Tweaks Manager: Ram Script - Ram Min Free and Swappiness;
- Auto ZIP-Align on boot - You can choose it in the tweaks app(NEW)
- Reviewed tweaks values (some from darky's rom some from hardcore some from other post in XDA)( thanks to bigeyes0x0 and Misledz )(NEW)
- Custom Boot-Animation support (place your custom bootanimation in /system/media/ and call it sanim.zip)(NEW)
To do:
- other tweaks suggested by you...
- whatever can be added.
Let me know what you think
HERE you can find the original post.
HOW TO INSTALL:
1- Flash with Odin the .tar file
or...if you went from a previous version of CF-ROOT
2- Download the .zip file into the external SD the open CWM Manager --> flash Kernel --> select the file you have just downoaded
IMPORTANT:
If you cannot find the two apps on your app drawer maybe you haven't space left on /system so delete some unused apps like aldiko, delere /system/cfroot folder and reboot
IMPORTANT/2: after the flash the phone might take some time to boot. You might think that it freeze on Samsung Logo but it's normal cause the auto-zipalign proc need some time. Just Wait.
UPDATE: Added CF-ROOT with my custom kernel. This have Ext4 inside the kernel (no modules) and OC to 1.1 Ghz. I think that it is secure. I haven't test it very well so please report me the issues you will find.
!
Version 05.09.2011 Changelog:
- added Graphics Boost Tweak (thanks Gana)
- added acid tweaks (thanks to the people that worked on it .. specially Bigeyes0x0);
- reviewed 00tweaks file by Bigeyes0x0;
To disable journaling on ext4 partition apply the attached journaloff.zip in CWM (Not CWM Manager app - it must be fixed).
There're two version of the CF-ROOT, the version with **CWM_Manager** can be flashed with CWM Manager App (select flash kernel) the other with odin (like always)
UPDATE 20.10.2011:
CF-ROOT for XXKPM can be found HERE:
- Standard Version --> http://www.multiupload.com/S463K75UED
- Surprise version ( i suggest you this) --> http://www.multiupload.com/G20L6PL5WC
What's new ?
- I finally finished the custom bootanimation support.... now works like he have to works. Just copy your bootanimation into /system/media and rename it to sanim.zip.... i think that here you can find what you need http://forum.xda-developers.com/showthread.php?p=17322814#post17322814
IMPORTANT!!!
If you have installed the beta version you must know that the ext4 conversion for that doesn't work properly. Ok, system, cache and dbdata will be on ext4 but data not. This because the init binary check on boot if /data have rfs FS and, if not, it format the partition wiping all your data.
In the new version i modified the init binary so it cannot do it more
I must say that i became mad to discover this damn thing !
A few questions: Are you using the latest fixed version of CWM? Also you mentioned that you would be releasing another update soon regarding the Nandroid backup image corruption issue. Is it in this release?
Also: Is this an alternative to ROM manager, apart from the inclusion of the tweaker tool?
Regarding the enhancements, could you please elaborate on some of them and what is safe/not safe to use (particularly in the tweaks and what they do)?
What I understood, after looking over all the posts, was that you optimized the CF-Root by chainfire for the i9003, by using a compatible Root, CWM, and adding an ext4 kernel? Are you going to port the ext4 converter tool as well? Will we be able to use an external SD card with ext4 formatting (Could be used to store files larger than 4GB)?
Sorry about the ton of questions. Trying to learn, and what better way to learn than from the best!
I'm going to take it out for a test drive now on XXKPE with ext4! Will report back later!
Thanks for your valuable work, I'm a huge fan!!!
Cheers
Update: Confirming that the passive charging bug has been fixed! Thanks Skin1980!
I cannot find the CWM or Tweaks icons in the app drawer as indicated in your screenshots. I can access CWM recovery mode using the 3 button combo though.
I had installed the last version of CWM by Amit and formatted with ext4 and I just used ODIN to flash over that install. I tried flashing again, still not appearing in app drawer. Any solutions?
Great job skin.. Hoping for the early release of a stable one.. Will test it later
Sent from my GT-I9003 using XDA Premium App
it's great...>.<
Auguri! Ok wow, This is pure genius . I've always been wondering what our CWM were based off. I guess using this would fix most issues people get when flashing CWM, since it's based off the original firmware
Also I'm loving the tweaks, they seem to make the phone more smooth, Although I've seen a few bugs after applying this I can't seem to use the V6 charger script anymore I get an error, will be posting one shortly. There are some minor hiccups in between and I tend to get FC on some apps when I multitask.
Edit: Turns out It's busybox related, no shell access. I've tried launching Busybox by Stericsons to check and It says no root access was given and boots me out.
i happy that u r belong to this community
Is there any recovery module or tweak available, in which we can handle basic file operation like copy, move from sd card to system or any thing similar?
Erahgon said:
A few questions: Are you using the latest fixed version of CWM? Also you mentioned that you would be releasing another update soon regarding the Nandroid backup image corruption issue. Is it in this release?
Also: Is this an alternative to ROM manager, apart from the inclusion of the tweaker tool?
Regarding the enhancements, could you please elaborate on some of them and what is safe/not safe to use (particularly in the tweaks and what they do)?
What I understood, after looking over all the posts, was that you optimized the CF-Root by chainfire for the i9003, by using a compatible Root, CWM, and adding an ext4 kernel? Are you going to port the ext4 converter tool as well? Will we be able to use an external SD card with ext4 formatting (Could be used to store files larger than 4GB)?
Sorry about the ton of questions. Trying to learn, and what better way to learn than from the best!
I'm going to take it out for a test drive now on XXKPE with ext4! Will report back later!
Thanks for your valuable work, I'm a huge fan!!!
Cheers
Update: Confirming that the passive charging bug has been fixed! Thanks Skin1980!
I cannot find the CWM or Tweaks icons in the app drawer as indicated in your screenshots. I can access CWM recovery mode using the 3 button combo though.
I had installed the last version of CWM by Amit and formatted with ext4 and I just used ODIN to flash over that install. I tried flashing again, still not appearing in app drawer. Any solutions?
Click to expand...
Click to collapse
1- The CWM used is always the last... if i'll update the CWM i'll update the CF-ROOT;
2- The CWM fixed reguard nandroid backup is under test;
3- My CWM isn't ROM Manager compatible... with the CWM Manager from Chainfire you can do a lot of things without going into CWM
4 - to convert in EXT4 just follow the guide on the other thread;
5- Not sure if you can format in XT4 your external_sd... try ;
6- The tweak are all sure... now i haven't time to exlplain better... some don't work.... some other work.
7- If the icon don't appear in app drawer try to check into system/app if the two files are there... if not try to remove /system/cfroot folder and reboot. Maybe your system folder is full so you can install they manually, the original apk are inside /res/misc/ folder.
8- bye
for me wifi not working obtaining ip address,gps not lock can i flas normel bootimg.ur work is awesome thx
bala242 said:
for me wifi not working obtaining ip address,gps not lock can i flas normel bootimg.ur work is awesome thx
Click to expand...
Click to collapse
I'm sorry.. for me everything is working...Before my CF-ROOT all works?
ur a superhero man!!
great ;-)
Skin1980 said:
I'm sorry.. for me everything is working...Before my CF-ROOT all works?
Click to expand...
Click to collapse
ya everything work before,can i reflas ur ver cwm?any body get this error?
Is there any tweak for increasing the 2g speed ??
or getting 3g speed in 2g plans...
I need this very badly...
I am not getting exact idea that what exact cf root does??? Or how cf root is so special...?? Will this make our work easy to do changes in kernal (that would be great)...???
Please can anybody in simple language....!!!
anigr88 said:
Is there any tweak for increasing the 2g speed ??
or getting 3g speed in 2g plans...
I need this very badly...
Click to expand...
Click to collapse
What your asking for is impossible.
Update!
The problem I had turned out to be due to the lack of space in the "/system" folder - as you had predicted Skin1980! Once I deleted some unnecessary software, I was up and running fully within minutes!
The phone works great! The fixes are really good! Having no issues except for one so far. I can't seem to mound "sdcard" in CWM recovery mode and cannot do a restore, for the same reason, from the CF-ROOT menu.
I have a feeling it's something I did wrong earlier, so I'll reflash completely and try again ('cause I have a lotta time on my hands atm and I want the bestest possible phone I can get).
Note: This doesn't seem to be compatible with DDKB2. Assuming that this is mainly for GB firmwares? Can someone corroborate this?
As usual, thanks!
Erahgon said:
The problem I had turned out to be due to the lack of space in the "/system" folder - as you had predicted Skin1980! Once I deleted some unnecessary software, I was up and running fully within minutes!
The phone works great! The fixes are really good! Having no issues except for one so far. I can't seem to mound "sdcard" in CWM recovery mode and cannot do a restore, for the same reason, from the CF-ROOT menu.
I have a feeling it's something I did wrong earlier, so I'll reflash completely and try again ('cause I have a lotta time on my hands atm and I want the bestest possible phone I can get).
Note: This doesn't seem to be compatible with DDKB2. Assuming that this is mainly for GB firmwares? Can someone corroborate this?
As usual, thanks!
Click to expand...
Click to collapse
after a whole day of using it. The phone will tend to lag and build up after a while. You'll notice the phone becomes slow again. I don't know what's going on.
Misledz said:
What your asking for is impossible.
Click to expand...
Click to collapse
I just want a small boost in the speed ....
Misledz said:
after a whole day of using it. The phone will tend to lag and build up after a while. You'll notice the phone becomes slow again. I don't know what's going on.
Click to expand...
Click to collapse
I did notice that initially it was fast. But as I kept it going through the day to recalibrate the battery, it did slow down and start to lag. I thought it was something to do with that. Also I felt that I had done something wrong with the flashing.
Going to overhaul my phone completely: Format, re-partition, XXKPE install (flashing twice), flash fixed CWM from the other thread, root using SOP 2.1.1, install busybox requirements for deodexing (this failed for me the last few times), restore settings using Titanium Backup, Nandroid backup, ext4 this baby, restore, and then install CF-ROOT to monitor.
Wish me luck! See you guys on the other side... again!
anigr88 said:
I just want a small boost in the speed ....
Click to expand...
Click to collapse
You've got the wrong thread mate!
Your bandwidth is capped by you operator and is dependent on how much they allocate you. On top of that 2G is physically limited to certain speeds which, usually, cannot be surpassed by legal means, and the illegal ones give you too less of a boost vs complications and errors to even bother about (I mean big ass hardware)!
Hello Guys,
Here is the custom ROM for Micromax A85 by team Indiedevers™
Directly coming to the features
--Features--
1. Based on Android 2.3.4
2. Based on new 2035 kernel
3. Pre-rooted
4. Zipaligned
5. Debloated
6. Enabled hardware acceleration
7. Enabled Purgable assets
8. Some battery tweaks
9. New TCP buffer values
10. Auto memory killer
11. Added updated host file-No ads any more
12. Enabled GPU accleration
13. Added new google Play market
14. New IPv6 tweaks for faster 3G network
15. Locked launcher in RAM
16. Many other Miscellaneous tweaks
17. Updated Superuser app
18. Added Quickpic app
19. ADW launcher
20. Busybox added
Link
JetMOD™3.0
--Instructions to flash-- (Take backup of previous ROM just incase....)
1. Download the zip
2. Dump it to sd card
3. Reboot into recovery
4. Factory reset
5. Wipe dalvik cache
6. Install zip from sd card
7. Reboot
Acknowledgement
1. Aman Khot,applicationz for testing
---Changelog---
v3 8/4/2012
1. Initial release
2. Rooted
3. New kernel
4. Android 2.3.4
Click to expand...
Click to collapse
---Reserved for themes-----
nice varun thankzzzzzzzz
JET-3(Simply Decent)
Very Good Work By Varun!!!
$-Aman-$
very nice work. thanks a lot.
I have some question:
1. have you done anything to reduce heat from the backside? undervolt maybe?
2. what about the use of battery? is this rom drain more battery than the official rom?
3. can I use usb otg with this rom?
thanks
please post link to download cwm recovery in english!
hi.. i wanted to try this rom. but first! can you guys post cwm recovery in english version? i can't find it anywhere on the net. mostly its chinese and i cant read or write chinese!
@dmaspocil
Here are the answers
1. For undervolting, we need kernel source
2. Yes I have added a good amount of battery tweaks so battery would last long
3. I didn't understand ur query
@arifater
Pmed u
Burned from my laser torch using pencil cells
varun.chitre15 said:
@dmaspocil
Here are the answers
1. For undervolting, we need kernel source
2. Yes I have added a good amount of battery tweaks so battery would last long
3. I didn't understand ur query
@arifater
Pmed u
Burned from my laser torch using pencil cells
Click to expand...
Click to collapse
usb otg = usb on the go. I cannot use it in froyo for K-Touch w700 for Indonesia. so, has this rom can operate usb on the go?
one more thing, would you please post the cwm in english in this thread too? if it is not your works, you just have to post the original link where you got that thing...
thanks again
i think i have one undervolt kernel but it is having ussd problem will searh any new kernel having undervolt feature
@dmaspocil
U can try it and tell me if it works as I don't have the device and I have developed this ROM and got it tested from aman and applicationz
Lol.. ofcourse its my work and for english recovery I m going to give a tutorial on our facebook group here
Indiedevers™- Micromax A85
@applicationz
That's good, if those chinese people can make a new kernel then 101% they have kernel source.
Try to ask them using google translate also try to find kernel source on the same place
Burned from my laser torch using pencil cells
Can Anyone Upload the video???
hey
just getting curious about JetRom3.0. Any body tried it???
Can Any One Upload The video of A85 running JetMod3.0 ???
varun.chitre15 said:
Hello Guys,
Here is the custom ROM for Micromax A85 by team Indiedevers™
Directly coming to the features
--Features--
1. Based on Android 2.3.4
2. Based on new 2035 kernel
3. Pre-rooted
4. Zipaligned
5. Debloated
6. Enabled hardware acceleration
7. Enabled Purgable assets
8. Some battery tweaks
9. New TCP buffer values
10. Auto memory killer
11. Added updated host file-No ads any more
12. Enabled GPU accleration
13. Added new google Play market
14. New Google Music
15. New IPv6 tweaks for faster 3G network
16. Locked launcher in RAM
17. Many other Miscellaneous tweaks
18. Updated Superuser app
19. Added Quickpic app
20. ADW launcher
21. Busybox added
Link
JetMOD™3.0
--Instructions to flash-- (Take backup of previous ROM just incase....)
1. Download the zip
2. Dump it to sd card
3. Reboot into recovery
4. Factory reset
5. Wipe dalvik cache
6. Install zip from sd card
7. Reboot
Acknowledgement
1. Aman Khot,applicationz for testing
Click to expand...
Click to collapse
hey varun , why dont you try and port this to a60 ?
hussainmicromaxa60 said:
hey varun , why dont you try and port this to a60 ?
Click to expand...
Click to collapse
i have purchased this phone . what do i do !
please post the link/tutorial for rooting and recoveries as well
we need to take backup before going ahead with the rom
Hi again…
I want to ask you some question. And I would be really glad for the answer.
I want to do some modification to your rom. Actually, the modification is only some deletion to some file so the rom will be smaller and lighter. So, the questions are only about is it safe to delete some files or not. And the other questions are about what is the function of the files that I want to delete. Here is the file:
1. I delete VoiceSearch.apk in system/app.
Is it save to remove?
2. I delete ime in system/bin.
What is it? What is the function of it? Is it save to remove?
3. I delete ime in system/framework.
What is it? What is the function of it? Is it save to remove?
4. I delete VoiceDialer.g2g in system/usr/srec/config/en.us/grammars.
What is it? What is the function of it? Is it save to remove?
7. I modify bootanimation.zip and shutdownanimation.zip in system/media until these files only have one picture in their folder ‘0’. I want to make the zip smaller so it will be lighter for the handheld to boot.
Is it safe?
thanks a lot for the answers
after installing the zip file i cant get my phone to boot to desktop instead it goes to recovery mode
-kul rom-v1 for Micromax a85
-kul rom-v1 for Micromax a85 released !!!!!!! download it from here . waiting for your feedback on main thread .
Please help me to root A85-currently using Igyan version of 2.3.4
How to Root Micromax A85
Dear all,
Yes I am a complete noob,
please help me to root my Micromax A 85 coz to be very frank Even igyan version on 2.3.4 suck in many ways.
1) Horrible low voice problem
2)Bad Signal receiving strength
3) Sad hang issue at least 5 times day,
4) boot screen sucks.
more over verion of ninad chaudri to flash using their boot.img doesn't work
Now please help me with step by step method to root my device. as I want to use/try [ROM] JetMOD™ 3.0|Indiedevers™| Micromax A85
please please all tech guru help me
kartikoli said:
after installing the zip file i cant get my phone to boot to desktop instead it goes to recovery mode
Click to expand...
Click to collapse
Im getting the same issue, after applying the update, the phone reboots back into recovery. Please advise!
Hi Guys,
Here i present a Work in progress Guide(cause i'm constantly learning and evolving this guide as a result) on the best settings for the supercharger v6 script to achieve the most out of your rom.
Prerequisites:
>Android device with 280mb user accessible ram(sorry but currently these are the devices targeted).
>Root acess, script manager and init.d support(tested on cm7 will work on both stock and cm roms).
>A usable brain.
>Common Sense
>a will to experiment
>not being an Ass and helping here if you can.
>Crossbreeder
>Supercharger script
Thread Map :
Post #2 : Supercharging and crossbreeder co usage.
Post #3 : Some more supercharging.(experimental)
Post #4 : Sysctl.conf tweaks for a better battery life(experimental)
Post #5 : Credits.
NOTE : attached to this post is a zipalign binary if your rom doesnt have it(look in /system/bin and /system/xbin) then extract binary from rar file and move it to /system/bin and give permission 0755(rwx,r-x,r-x)
how to do via adb
Code:
adb push zipalign /system/bin/
adb shell
chmod 0755 /system/bin/zipalign
Supercharger and Cross-breeder co-usage.
Supercharger CrossBreeder Combo:-- Yes This will help provide a boost.(this is an alternate to Activo Speeder,Adrenaline engine+boost)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Q.Now you guys ask me why to use crossbreeder along with supercharger ?
Ans.Crossbreeder is an entropy generator(faster refreshing & movements generation in apps) along with dnsmasq cached dns requests(speeds the net)It does nothing where the ram is concerned(and ram is a scarce resource).Here's where Supercharger comes in the combination of min-frees , and fast engine flush(its like an automated adrenaline boost!)allows for much better user experience.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
How to patch service.jar Guide below
your service.jar is not patched(otherwise oom groupings would be fixed and launcher patched only for ics and above).
you are using windows download this zip(yes its a zip) extract its contents to a folder.
now connect your device to the computer(enable usb debugging and allow root permission for adb and apps).
now from the folder you extracted the Ultimate jar power tools to click on ultimate_jar_patcher_adb.bat
while running since you have connected your phone and enabled all settings as mentioned choose live mode.
If you face any problems upload your service.jar here and I'll patch it.
Note : - the service.jar doesn't need to be patched for 2.3 or 2.2 as the values are written & read from build.prop or local.prop(preference to build.prop).
now lets begin.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CrossBreeder in recovery its a flash-able zip.
now for the interesting part cross-breeder has certain parts of supercharger in it.Mainly Kernel Mods(KAK)
so in supercharger I'm sure you know how to use it if no here's a small guide.
Guide
install an app called script manager(available in the play-store).
inside the app your first prompt will have an option of browse as root choose it(gets highlighted as blue)and click OK
now navigate to where the downloaded script is located and click on it.
on the top corner there should be an icon of superuser (skull with cross bones) click it and the n click run
now you are running the script....
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
now I wont help you with each and every aspect here(Its actually very simple if confused ask).
main point is to accept nearly everything when asked
a few exceptions are.
if you have zip align is any other script like int2ext then choose to disable boot align and zip align and only enable fix emissions.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
launcher strength = die-hard
Note :don't lock home in memory.
min-frees Settings this is your ram manager :
The setting are not available for 384mb devices(like us) so after a lot of trial and error I found the best working categorization they are as follows :-
Old Settings:
for people who like to have a smooth lag-free experience in their current app BUT no multitasking choose balanced(512hp) categorized by me as aggressive.(option 6)
for people who like limited multitasking along with a fairly lag-free experience choose Quick v6 cust-OOMizer. Categorized by me as balanced. (option 10).
for people who like a large amount of apps open simultaneously and don't mid as many apps open choose 256hp balanced categorized by me as Multitasking (option 3).
a good guide to understand min-free settings and OOM is this
Note : disable zram(comp-cache).
Note : disable lock launcher in memory.
now when prompted for kernel strength choose default(thus no conflict with crossbreeder).
Detailing (helps use it).
for detailing choose every 4th boot.
Some Moarh Supercharging(Experimental).
New Settings: (only for people who know what they are doing).
These are custom minfree values that can be entered from option 10(custOOMize) and not enabling minfree calculator values.
they are still experimental.
Code:
8,12,30,36,41,47----Balanced(same as minfree calculator).
8,12,33,39,44,50----Aggressive
8,12,24,30,35,41----Multitasking
Fast-Engine Flush
for fast engine flush(its kind of like adrenaline boost hell its the same). choose every 6hrs(its automatic wont even know its there) recommended for gb or froyo roms....still lagging choose every 3hrs or recommended is 6 hrs.
NOTE FOR GAMERS
enable fast engine flush every . hrs this will remove cached apps every 6mins allowing for free ram i.e a fast and generally lagfree experience though i recommend to change back to 6hrs once game finishes.
this should allow for a fast and smooth performance with no loss of life.
Thanks and Happy Flashing.
Sysctl.conf tweaks for a better battery life(Highly Experimental)
Attached is a sysctl.conf file that should be placed in /system/etc/<here>(first unzip it) with permission rw-,r--,r-- or 0644
also if you are on a rom other than cm7 then also place in /system/etc/init.d/<here> file 01sysctl(first unzip it) and permission 0755 or rwx,r-x,r-x
these are certain tweaks for the kernel that are executed at boot time and supose to help improve the battery life as stated experimental.
Risk:
Lower battery life ,lag.
for those who want to see the sysctl tweaks here they are.
HTML:
vm.drop_caches=3
vm.oom_kill_allocating_task=0
vm.panic_on_oom=0
vm.dirty_background_ratio=70
vm.dirty_ratio=90
vm.vfs_cache_pressure=10
vm.overcommit_memory=1
vm.min_free_order_shift=4
vm.laptop_mode=0
vm.block_dump=0
vm.oom_dump_tasks=1
vm.swappiness=60
vm.dirty_writeback_centisecs=500
vm.dirty_expire_centisecs=250
vm.min_free_kbytes=4096
fs.file-max=524288
fs.inotify.max_queued_events=32000
fs.inotify.max_user_instances=256
fs.inotify.max_user_watches=10240
fs.lease-break-time=10
kernel.msgmax=65536
kernel.msgmni=2048
kernel.panic=10
kernel.random.read_wakeup_threshold=128
kernel.random.write_wakeup_threshold=256
kernel.sem='500 512000 64 2048'
kernel.shmmax=268435456
kernel.threads-max=524288
net.core.rmem_max=524288
net.core.wmem_max=524288
net.ipv4.tcp_rmem='6144 87380 524288'
net.ipv4.tcp_wmem='6144 87380 524288'
net.ipv4.tcp_timestamps=0
net.ipv4.tcp_sack=1
net.ipv4.tcp_congestion_control=cubic
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_tw_recycle=1
net.ipv4.tcp_tw_reuse=1
Credits
Zepelinrox(Supercharger creater)
Hero(sysctl.conf guy)
idcrisis(crossbreeder developer)
Dark Passenger(Guide maker)
@ Dark Passenger
I don't understand nothing. What need install? If all, I think it is much. It is too tangled for me.
ZmisiS said:
@ Dark Passenger
I don't understand nothing. What need install? If all, I think it is much. It is too tangled for me.
Click to expand...
Click to collapse
Install V6, install crossbreeder done
ZmisiS said:
@ Dark Passenger
I don't understand nothing. What need install? If all, I think it is much. It is too tangled for me.
Click to expand...
Click to collapse
Its a guide to know which settings to configure in Supercharger v6 script so as to get the best performance.
So to install you need the supercharger script.
swat4samp said:
Install V6, install crossbreeder done
Click to expand...
Click to collapse
actually i found supercharger entropy enlarger is better than crossbreeder(doesnt get killed easily and better scaling).
Dark Passenger said:
Its a guide to know which settings to configure in Supercharger v6 script so as to get the best performance.
So to install you need the supercharger script.
actually i found supercharger entropy enlarger is better than crossbreeder(doesnt get killed easily and better scaling).
Click to expand...
Click to collapse
But i observed battey drain with supercharger's entropy generator..thats the reason i am using crossbreeder (well honestly i dunno whether its getting killed or not)..so ur suggestion is to use supercharger's entropy??I will have a go once again..
swat4samp said:
But i observed battey drain with supercharger's entropy generator..thats the reason i am using crossbreeder (well honestly i dunno whether its getting killed or not)..so ur suggestion is to use supercharger's entropy??I will have a go once again..
Click to expand...
Click to collapse
most likely the drain is because the entropy enlarger runs through out rather than only when device is awake.Dunno about now but the battery is okay for me works a day and a half with generally medium usage.
if crossbreeder works for you go for it.
also about battery try the sysctl.conf tweaks they cause a battery drain of 1% in 6 hrs.Litterally seems as if the percentage meter was faulty. though this was during device sleeping with mobile data and sync on.
Bro is it good for cm7 too? Means is it beneficial to cm7 too? I think yes but what about services.jar patching of mini cm7 or official cm7?
Where to find zipalign binary for cm10...?
Sent from my GT-S5670 using Xparent Cyan Tapatalk 2
Raj joshi said:
Bro is it good for cm7 too? Means is it beneficial to cm7 too? I think yes but what about services.jar patching of mini cm7 or official cm7?
Click to expand...
Click to collapse
Yes am using it currently in official cm7.(the main benefit is if you use an app2sd script and with a gazillion apps).
JatinSoni said:
Where to find zipalign binary for cm10...?
Sent from my GT-S5670 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
attaching to first post please wait.
EDIT attached along with how to give permission and copy via adb.
I download zipalign & paste it to system/ bin & x bin....give it proper permission but still problem as it is.
Sent from my GT-S5670 using Xparent Cyan Tapatalk 2
JatinSoni said:
I download zipalign & paste it to system/ bin & x bin....give it proper permission but still problem as it is.
Sent from my GT-S5670 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
download this :
http://forum.xda-developers.com/attachment.php?attachmentid=1241890&d=1344115573
unzip it and open sqlite3+zipalign_installer_v6.sh with script manager. it will automatically install zipalagn binary .
JatinSoni said:
I download zipalign & paste it to system/ bin & x bin....give it proper permission but still problem as it is.
Sent from my GT-S5670 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
only in bin not both bin and xbin.
ehsan-black said:
download this :
http://forum.xda-developers.com/attachment.php?attachmentid=1241890&d=1344115573
unzip it and open sqlite3+zipalign_installer_v6.sh with script manager. it will automatically install zipalagn binary .
Click to expand...
Click to collapse
Is this complete program? Need more something install?
ZmisiS said:
Is this complete program? Need more something install?
Click to expand...
Click to collapse
yes. it's complete. just Extract the zip to the root of the sdcard and it will all be in /sdcard/SuperCharger_Starter_Kit.and open zipalign script with script manager
ehsan-black said:
yes. it's complete. just Extract the zip to the root of the sdcard and it will all be in /sdcard/SuperCharger_Starter_Kit.and open zipalign script with script manager
Click to expand...
Click to collapse
I tried with Script Manager and I got notification that I run it with root and that I tray again. I opened Script Manager and click Allow for root, but problem is same. Font size in Script Manager is so smal.
ZmisiS said:
I tried with Script Manager and I got notification that I run it with root and that I tray again. I opened Script Manager and click Allow for root, but problem is same. Font size in Script Manager is so smal.
Click to expand...
Click to collapse
did you hit Skull and Bones icon?!!
This L SPEED IS MADE By. #PAGET96
#MALTONATOR
For more details and downloads go to http://forum.xda-developers.com/showthread.php?p=58598266
L Speed is a mod that combines some scripts and little tweaks in one package which is aimed to improve performance, reduce lags and expand battery life.
Originally developed for the LG L Series and Nokia X2, now this mod is expanded and modified accordingly to run on any device!
This mod will work on any device.
All you need to ensure is that your phone is running Android!
It will work from Android 2.3 (Gingerbread) to Android 6.0 (Marshmallow)
DO NOT USE THIS MOD WITH OTHER MOD, CLEAN UP YOUR init.d FOLDER BEFORE FLASHING!
If you're updating from previous versions, you don't need to do anything, the script will do everything automatically
User friendly (clear menu in Terminal Emulator)
Less RAM usage through zipalign
Better Performance
Less lags with LMK Tweak and various VM Tweaks
Faster SDCARD Read/Write speed
Cleaner script for cleaning system
Better battery life
CPU tuner
Battery calibration
Seeder
Kernel tweaks
FS Trim
No more ads, host file updated
How to clean up init.d
Use a root explorer as File Explorer)
* go to root directory ( / )
* navigate to /system/etc/init.d
* Open init.d folder
* Delete all files from other mods (e.g. zipalign, sqlite, setpermissions, System tweaks, etc.)
* Done! Optionally, do a reboot for safety measure
Requirements
* Root Access
* init.d support (Users without init.d just flash the mod, but SuperSU is needed)
* Custom Recovery (such as CWM or TWRP)
- Mod will not be properly flashed on some device with TWRP because the recovery doesn't have /tmp folder
* Minimal ~10MB free space on system partition
How to install:
Before flashing please take a backup to avoid any incompatibility issues. (Just in case)
1. Change SElinux to permissive*IMPORTANT* (but no need for Nokia x2 because we already have it)
3. Reboot into recovery mode
4. Flash zip file
5. Reboot
6. Profit!
L Speed menu: (check script, L Speed Wizard, changelogs, uninstall)
Download Terminal Emulator from Play Store
Open it and type:
su
LS
You can BOOST your device directly from teriminal emulator
Thanks to
*@Paget32
XDAevDB Information
L SPEED, Tool/Utility for the Android General
Contributors
Yasat nokiax2,Paget96, skyinfo, F4uzan, aidasaidas75
Source Code: https://github.com/Paget96/L_SPEED.git
Version Information
Status: Stable
Stable Release Date: 2015-09-18
Created 2015-02-11
Last Updated 2015-09-18
What's this? There is already a thread for l speed.
Yes, but not in Nokia x2.☺
Sent from my ara
There is no thread for l speed for a certain device because it's made for all devices.
Totally time pass mod....i tried in cm11 no speed improvement i think i makes my phn more laggy now
Same problem.....
please use wisely guys. it works fine for me
yasat nokiax2 said:
please use wisely guys. it works fine for me
Click to expand...
Click to collapse
It performs good but not too good.....in cm11 before install l speed scroll lags and also after install this prblm occurs.....no chng
@yasat nokiax2 what exacktly to download from the zips because there is a lot?
https://www.androidfilehost.com/?fid=24269982086995056
Try that @Ahmed X
its laggy.. **** -_-
sonic.exp said:
its laggy.. **** -_-
Click to expand...
Click to collapse
Hey bro, can you please let me know which settings you used. Sol that we can solve that lag. Thank you!
@yasat nokiax2 bro......after flash play store sometime my phn gets leggy but after lock the screen and on its runs smooth how to solve......?
Pawan987 said:
@yasat nokiax2 bro......after flash play store sometime my phn gets leggy but after lock the screen and on its runs smooth how to solve......?
Click to expand...
Click to collapse
Hmm. Do you have good storage bro. I mean like >600mb internal storage?
yasat nokiax2 said:
Hmm. Do you have good storage bro. I mean like >600mb internal storage?
Click to expand...
Click to collapse
Yes i have
And what about mem card?
If you have more that 1gb in your mem. Card then download a app called ram expander from browser since its paid app. Open it and swap your wish in your mem. Card. Don't forget to keep 100% swappiness and autorun on. After completed reboot your device.
yasat nokiax2 said:
And what about mem card?
Click to expand...
Click to collapse
Yes mem crd also has 2-3gb free space
---------- Post added at 05:58 PM ---------- Previous post was at 05:55 PM ----------
yasat nokiax2 said:
If you have more that 1gb in your mem. Card then download a app called ram expander from browser since its paid app. Open it and swap your wish in your mem. Card. Don't forget to keep 100% swappiness and autorun on. After completed reboot your device.
Click to expand...
Click to collapse
I will try....thanks bro for help
Why y bee deleted all things...what happened??yasat
Pawan987 said:
Yes mem crd also has 2-3gb free space
Click to expand...
Click to collapse
Yeah try that . it may work. Let's me know the result bro