[Completed] [Q] HTC ONE X PLUS BootLoop Need help! - XDA Assist

I try to change my Rom fo my HOX+ but it stuck on the white screen with HTC logo...
I Press volume Down+Power in order to access the recovery menu (CWM) and the only think i got its an HTC logo and then bakc to Fastboot menu... Even with the Factory reset Option i go back to Fastboot menu.... W/e I use my pc to change the recovery menu (teamwin i think) to install my old ROM,but i get this error
Code:
E: Error in /tmp/sideload/package.zip
(status 7)
*Verifuing filesystems...
*Verifying partitioon sizes...
Error flasing zip/sdcard/cm-11.zip
Then i try to install CWM from my PC again hoping that will work but i get this error while the fast boot
Code:
C:\Android>fastboot flash recovery cwm.img
sending 'recovery' (8644 KB)...
OKAY [ 1.220s]
writing 'recovery'...
(bootloader) Format partition SOS done
FAILED (remote: (0000000a))
finished. total time: 1.480s
And thats all i got untill now...
Any leads?
Thanks in advance! ^_^

Hi, thank you for using XDA Assist. I would suggest you ask this question in this thread, http://forum.xda-developers.com/showthread.php?t=2200811 They are the experts on your device.
Good luck!

jd1639 said:
Hi, thank you for using XDA Assist. I would suggest you ask this question in this thread, http://forum.xda-developers.com/showthread.php?t=2200811 They are the experts on your device.
Good luck!
Click to expand...
Click to collapse
Well ok... Thanks for reply!

Thread closed.

Related

unable to reinstall stock recovery (remote: image update error)

I unable to reinstall stock recovery (now i have CWM v5.8.3.1 and work only this ver) ?
I try lock and unlock but see error:
sending 'recovery' (9480 KB)... OKAY [ 4.806s]
writing 'recovery'... FAILED (remote: image update error)
I unable to install ruu quit with error "IMG err 156" ?
Sorry I can't help you but this is posted in the wrong section.
Sent from F.E.M.A. Region 9
Moved To Q&A​
Please post in the correct section​
any solution?
schMATKA said:
I unable to reinstall stock recovery (now i have CWM v5.8.3.1 and work only this ver) ?
I try lock and unlock but see error:
sending 'recovery' (9480 KB)... OKAY [ 4.806s]
writing 'recovery'... FAILED (remote: image update error)
I unable to install ruu quit with error "IMG err 156" ?
Click to expand...
Click to collapse
What stock recovery image are you trying to flash?
Link to it?
baseballfanz said:
What stock recovery image are you trying to flash?
Link to it?
Click to expand...
Click to collapse
I try 3 version extract from ruu and One_S_All-In-One_Kit "Stock flash recovery" and r2-modaco-recovery-clockwork-touch-ville and ville_recovery_signed
Not sure, your bootloader is unlock when you're trying?
and the command
Code:
fastboot flash recovery [COLOR="Red"]recovery.img[/COLOR]
recovery.img has to be spell exactly as the recovery image file you have.
baseballfanz said:
Not sure, your bootloader is unlock when you're trying?
and the command
Code:
fastboot flash recovery [COLOR="Red"]recovery.img[/COLOR]
recovery.img has to be spell exactly as the recovery image file you have.
Click to expand...
Click to collapse
sending 'recovery' (9480 KB)... OKAY [ 4.806s]
writing 'recovery'... FAILED (remote: image update error)
pb
Siret to intercept,
I have an HTC VILLEC2 ( now i know this) few days ago I have tryed to install an custom rom. Because I didn't know that my device is an S3 processor i proceed with unlocking my boot loader. That went well. I have tryed to install CWM. That went also well, but I can't start it.
For te moment the phone runns în stock firmware pretty good but do not allowed me to make any Up Date frm HTC Updat server.
The question is, it is possibe to reinstall the original CWM. Also where can I download it?
THX FOR ALL SUPPORT IN ADVANCE.

[Q] TWRP Install Fail

I have an unlocked, rooted 300T with JB which I flashed to 10.4.2.13 using the existing installation of TWRP which has now disappeared when booting+Vol Down. I do not seem to be able to re-install TWRP using fast boot as I get this message.
Code:
C:\Users\Mike\Desktop\Fastboot>fastboot -i 0x0B05 flash recovery twrp.blob
sending 'recovery' (7304 KB)... OKAY [ 2.058s]
writing 'recovery'... FAILED (status read failed (Too many links))
finished. total time: 2.061s
I have searched extensively and cannot find a similar issue, but without TWRP I cannot then flash a custom ROM...:crying:
Seahorse said:
I have an unlocked, rooted 300T with JB which I flashed to 10.4.2.13 using the existing installation of TWRP which has now disappeared when booting+Vol Down. I do not seem to be able to re-install TWRP using fast boot as I get this message.
Code:
C:\Users\Mike\Desktop\Fastboot>fastboot -i 0x0B05 flash recovery twrp.blob
sending 'recovery' (7304 KB)... OKAY [ 2.058s]
writing 'recovery'... FAILED (status read failed (Too many links))
finished. total time: 2.061s
I have searched extensively and cannot find a similar issue, but without TWRP I cannot then flash a custom ROM...:crying:
Click to expand...
Click to collapse
Are you installing the jb compatible twrp? what happens when you try and boot recovery?
Sent from my SGH-I727 using xda app-developers app
I have downloaded the 2.2.2 jb blob from here. When I boot into recovery & select RCK I get an android on his back with an exclamation mark in his stomach.
Seahorse said:
I have downloaded the 2.2.2 jb blob from here. When I boot into recovery & select RCK I get an android on his back with an exclamation mark in his stomach.
Click to expand...
Click to collapse
When you used twrp to flash stock it includes recovery which overwrites twrp. Go back to the instructions to fastboot twrp, do so and you should be good.
Good Luck!
Try a new download of twrp!
Reboot your pc, only plugin your asus and no other device, retry fastboot.
Forgot, if on dock remove from dock reboot pc and asus and try again.
Clearing cache maybe? Just a shot in the dark, never seen this one. I can tell you I flashed ota v13 and it blew away my recovery but I was able to get it back easily.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
After following numerous google links - too many links fastboot, I found one resolution. Another device used on pc and usb drivers installed since last use of unit giving links error. Resolution was remove offending drivers, reboot pc and profit.
Good Luck!
I'm having a bit of a different problem. I have flashed twrp 2.2.2 several times and each time it says okay but it isn't updating it. I still have 2.2.1.5 installed.
Code I'm using...
adb reboot bootloader
fastboot -i 0x0B05 flash recovery tf300t-jb.blob
Click to expand...
Click to collapse
It goes through the install and says OKAY at the end yet it doesn't actually update the recovery blob.
Blew away cache, used fastboot again on twrp.blob and got same install fail error message. However, on power on + vol down RCK now works with TWRP, which is kind of odd, but there you go. Thanks for all the suggestions...
glad you got it fixed
SITH16 said:
I'm having a bit of a different problem. I have flashed twrp 2.2.2 several times and each time it says okay but it isn't updating it. I still have 2.2.1.5 installed.
Code I'm using...
Quote:
adb reboot bootloader
fastboot -i 0x0B05 flash recovery tf300t-jb.blob
It goes through the install and says OKAY at the end yet it doesn't actually update the recovery blob.
Click to expand...
Click to collapse
Three things come to mind.
1. Try to flash as twrp directions show; without adb reboot bootloader.
2. Verify you are trying to flash the proper version for your bootloader; ics or jb.
3. If the above two items fail redownload proper version for your boot loader and try again.
Note: The twrp page also shows how to flash with adb!
Good Luck!
Terminal Emulator is an easier way to flash TWRP imo. But hey.
babymatteo said:
Terminal Emulator is an easier way to flash TWRP imo. But hey.
Click to expand...
Click to collapse
Terminal method worked. Thanks everyone for helping me out.
TWRP Install Fail
Hello,
I am having similar issues, but mine results in the following:
sending 'recovery' (6292 KB)... OKAY [ 2.706s]
writing 'recovery' ... FAILED (remote: (InvalidState))
I have unlocked my TF700T and I have followed all of the instructions I have seen posted everywhere. This is where I am stuck.
Any advice?
BadWolf428 said:
Hello,
I am having similar issues, but mine results in the following:
sending 'recovery' (6292 KB)... OKAY [ 2.706s]
writing 'recovery' ... FAILED (remote: (InvalidState))
I have unlocked my TF700T and I have followed all of the instructions I have seen posted everywhere. This is where I am stuck.
Any advice?
Click to expand...
Click to collapse
this is the tf300t forum. Make sure you are installing a tf700t TWRP
cmendonc2 said:
this is the tf300t forum. Make sure you are installing a tf700t TWRP
Click to expand...
Click to collapse
I noticed that after I hit reply. I was using all of the correct TF700t TWRP and whatnot. I found this in a google search because it was similar to my issue. It turned out that even though I thought I had unlocked my device, it did not unlock. I fixed that and now I am all set.
BadWolf428 said:
Hello,
I am having similar issues, but mine results in the following:
sending 'recovery' (6292 KB)... OKAY [ 2.706s]
writing 'recovery' ... FAILED (remote: (InvalidState))
I have unlocked my TF700T and I have followed all of the instructions I have seen posted everywhere. This is where I am stuck.
Any advice?
Click to expand...
Click to collapse
The warning invalid state normally applies to the bootloader being locked make sure your bootloader is unlocked.
Sent from my Nexus 5 using Tapatalk

[Q] HTC One S can't pass the HTC logo

Hello
a few days ago I used "HTC ONE S AIO KIT" to install Jelly bean 4.2.2 on my HTC ONE S
I successfully installed the jelly bean and everything was fine
during the process, I created a backup from my phone in the ClockworkMod
today, I booted to ClockworkMod recovery > backup and restore > restore > and selected the backup file I created
the phone restarted and got stuck on the HTC ONE logo
I did everything I could in the past 2 hours, searching everywhere
even tried this command "fastboot flash boot "C:\...\boot.img"" but nothing worked - after doing this, the ClockworkMod gave me an error that said "can't mount /sdcard"
appreciate any help
Ok , I just updated to latest version of clockwork and still can not fix "can't mount sdcard" error
I have been doing this for 6 hrs now
can someone please help me ?
dnotoco some
jimlee2 said:
Ok , I just updated to latest version of clockwork and still can not fix "can't mount sdcard" error
I have been doing this for 6 hrs now
can someone please help me ?
Click to expand...
Click to collapse
install ruu original and unlok again is the most easiest for you
ZALACAYN2 said:
install ruu original and unlok again is the most easiest for you
Click to expand...
Click to collapse
thanks for the reply
I can't find the RUU for Fido/Rogers HTC ONE S
I searched for factory every where, I made a backup before but now I can't access the SD card to see if it it still there or not
jimlee2 said:
thanks for the reply
I can't find the RUU for Fido/Rogers HTC ONE S
I searched for factory every where, I made a backup before but now I can't access the SD card to see if it it still there or not
Click to expand...
Click to collapse
Well that is a pickle. Not having a RUU to fall back on.
Good news is you can still fastboot in bootloader.
So you can try different roms until one works. So at least you have a phone that works.
Push a rom to your phone
http://forum.xda-developers.com/showthread.php?t=1667929&highlight=adb+push
Flash a boot.img
http://forum.xda-developers.com/showthread.php?t=1752270&highlight=fastboot
fixing sd card mounting
http://forum.xda-developers.com/showthread.php?t=1630459
tivofool said:
Well that is a pickle. Not having a RUU to fall back on.
Good news is you can still fastboot in bootloader.
So you can try different roms until one works. So at least you have a phone that works.
Push a rom to your phone
http://forum.xda-developers.com/showthread.php?t=1667929&highlight=adb+push
Flash a boot.img
http://forum.xda-developers.com/showthread.php?t=1752270&highlight=fastboot
fixing sd card mounting
http://forum.xda-developers.com/showthread.php?t=1630459
Click to expand...
Click to collapse
I followed all these steps but I am not able to get it fixed
is it possible to help me via google talk or something? thanks
I get this error now when I try to flash a recovery
Code:
C:\Fastboot>fastboot flash recovery op
enrecovery-twrp-2.4.1.0-ville.img
sending 'recovery' (7820 KB)... OKAY [ 1.426s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.251s
I searched the forum and tried different methods to fix it but still no luck
I am going crazy over this problem
jimlee2 said:
I get this error now when I try to flash a recovery
Code:
C:\Fastboot>fastboot flash recovery op
enrecovery-twrp-2.4.1.0-ville.img
sending 'recovery' (7820 KB)... OKAY [ 1.426s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.251s
I searched the forum and tried different methods to fix it but still no luck
I am going crazy over this problem
Click to expand...
Click to collapse
Where did you download that recovery from?
Sent from my Nexus 7 using Tapatalk HD
khan.orak said:
Where did you download that recovery from?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
from the original twrp site
Ok. Are you flashing the boot. img from the extracted rom zip that you are installing. I never used the c:/ blah blah. I always put the boot.img file in the same folder as adb and fastboot then with the phone in fastboot usb type fastboot flash boot boot.img in the command prompt on the computer. It sounds like you might have a bad recovery. Have you tried to flash a new recovery?
Sent from my HTC One using xda app-developers app

[Completed] Lenovo tab2 a7-10 [mtk-8127] bricked

Hey,I dont know how to put it...
But I had somehow managed to mess the partition of my device when i was trying to restore a backed up rom (probably faulty one).
> it is stuck on lenovo logo.
> i can go to fastboot but cant flash cache or system as fastboot get stuck on erasing...
G:\T2-A7-10F_USR_S041_150112_ROW\Target_bin>fastboot flash cache cache.img
erasing 'cache'...
> and if i try to reflash other recovery it says cant parttiion doesnt support flash
G:\T2-A7-10F_USR_S041_150112_ROW\Target_bin>fastboot flash recovery recovery.img
sending 'recovery' (4514 KB)...
OKAY [ 0.141s]
writing 'recovery'...
FAILED (remote:
partition 'recovery' not support flash)
finished. total time: 0.156s
It has a custom (buggy) philz recovery flashed, from a ****ty blog as it was the only one available.
I am unable to mount external sdcard too.
also i've tried sp flash tool
but it doesnt detect the device
when i load the scatter file and press download and then when i connect the tab in power off condition it just hangs for sometime and then does nothing.
I want to flash the files back so I can get it in working conditions.
thank you
Hello,
Welcome to XDA.
I'm not finding a forum for your device. Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help.
There are probably some threads in that forum that apply to your device so you may want to go through the forum to see if one of them can help you.
Good luck.

OnePlus 6 No OS No TWRP, stuck on fastboot screen

Hello,
I'm a young user of a OP6, I did root it well, installed TWRP but everything ****ed up when I did erase everything w/ TWRP.
My situation now: No OS, no TWRP, stuck on fastboot mode.
What I've tried:
1- Flashing TWRP.img again, getting this error code :
C:\WINDOWS\system32>fastboot flash recovery "D:\Users\Documents\Rooter\twrp-3.2.3-1-enchilada.img"
target reported max download size of 536870912 bytes
sending 'recovery' (28728 KB)...
OKAY [ 0.618s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 0.624s
2- Tried to write it on boot_b (fastboot flash boot_b twrp-3.2.3-1-enchilada.img)
Works but while booting getting :
C:\WINDOWS\system32>fastboot boot "D:\Users\Documents\Rooter\twrp-3.2.3-1-enchilada.img"
downloading 'boot.img'...
OKAY [ 0.620s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.641s
3- Same steps with OP6 OS, same problems
I'm stuck and begging for help (french/english) and not a simple redirect.
I can't access to adb devices and neither to /sdcard/ .
Thanks a lot for your advices to save my phone
Reyz
Reyzhia said:
Hello, I'm a young user of a OP6,.........
Click to expand...
Click to collapse
I don't have this device but, I believe that one or more of the following threads should be helpful for what you are looking for that's specific to your device. Don't be afraid to ask for some member guidance within one of them too.
https://forum.xda-developers.com/showthread.php?t=3851802
https://forum.xda-developers.com/showthread.php?t=3828416
https://forum.xda-developers.com/showthread.php?t=3792643
https://forum.xda-developers.com/showthread.php?t=3796051
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900T device.
Ibuprophen said:
I don't have this device but, I believe that one ..
Click to expand...
Click to collapse
Thanks you much for your reply, I did set my slot on A and i m now trying to reboot normally (it s taking long but wil wait 1/2 h), I dont really know if I should flash TWRP..
Reyzz
Reyzhia said:
Thanks you much for your reply, I did set my slot on A and i m now trying to reboot normally (it s taking long but wil wait 1/2 h), I dont really know if I should flash TWRP..
Reyzz
Click to expand...
Click to collapse
Closing thread, my phone is alright now
Thanks for helping <3
Reyz
Reyzhia said:
Closing thread, my phone is alright now
Thanks for helping <3
Reyz
Click to expand...
Click to collapse
Hey how do u solve it? i have the same problem as you,
Thanks,
Best Regards,
Haikal Rahman
xxhyekal said:
Hey how do u solve it? i have the same problem as you,
Thanks,
Best Regards,
Haikal Rahman
Click to expand...
Click to collapse
I hope you've solved the problem by now, but if not, you can use fastboot to load twrp directly by typing
fastboot boot twrp.img
(replace twrp.img with the actual filename).
Once twrp loads, you can sideload or use adb push to transfer the twrp.img file to the phone and install it from twrp.
You don't flash the twrp.img file ... instead boot twrp.img temporarily .... 'fasboot boot twrp.img' ... then you can flash the zip file in TWRP
Go to this post to unbrick your device
https://forum.xda-developers.com/oneplus-6/how-to/op6-collection-unbrick-tools-t3914109
Good luck

Categories

Resources