Database Info

[Q] Rooting gone bad

I have a Galaxy Tab 2 10.1 w/ JB 4.1.1 through AT&T that got screw up while rooting
I was following the guide here:
androidrooting.com/how-to-root-galaxy-tab-2-10-1-p5100/
I deviated from the guide in 1 way. When it says to select the '.zip' file, I assumed they meant the .md5, as .zip is not an option
When I hit start on Odin, Odin crashed. I loaded it up and tried it again. This time it 'failed'. My tablet rebooted to the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." So, I installed Kies on my computer and tried to do what it says. When the device is plugged in Kies tries to connect but comes back with the error "Device not responding. To fix the issue, reboot the device". I also tried using Odin again to continue where I left off, but it simply fails.
Any advice would be great. Please help, thanks!

tholt2121 said:
I have a Galaxy Tab 2 10.1 w/ JB 4.1.1 through AT&T that got screw up while rooting
I was following the guide here:
androidrooting.com/how-to-root-galaxy-tab-2-10-1-p5100/
I deviated from the guide in 1 way. When it says to select the '.zip' file, I assumed they meant the .md5, as .zip is not an option
When I hit start on Odin, Odin crashed. I loaded it up and tried it again. This time it 'failed'. My tablet rebooted to the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." So, I installed Kies on my computer and tried to do what it says. When the device is plugged in Kies tries to connect but comes back with the error "Device not responding. To fix the issue, reboot the device". I also tried using Odin again to continue where I left off, but it simply fails.
Any advice would be great. Please help, thanks!
Click to expand...
Click to collapse
I should also note that the upper right corner of the tablet says:
"ODIN MODE
PRODUCT NAME: ESPRESSO10
CUSTOM BINARY DOWNLOAD: YES (3 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Unsupport devtype"

tholt2121 said:
I have a Galaxy Tab 2 10.1 w/ JB 4.1.1 through AT&T that got screw up while rooting
I was following the guide here:
androidrooting.com/how-to-root-galaxy-tab-2-10-1-p5100/
I deviated from the guide in 1 way. When it says to select the '.zip' file, I assumed they meant the .md5, as .zip is not an option
When I hit start on Odin, Odin crashed. I loaded it up and tried it again. This time it 'failed'. My tablet rebooted to the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." So, I installed Kies on my computer and tried to do what it says. When the device is plugged in Kies tries to connect but comes back with the error "Device not responding. To fix the issue, reboot the device". I also tried using Odin again to continue where I left off, but it simply fails.
Any advice would be great. Please help, thanks!
Click to expand...
Click to collapse
Strange, because it should work. You didn't need to select the .zip file indeed, choosing the .md5 file was the right choice. Have you tried running Odin as an administrator?

Endiej said:
Strange, because it should work. You didn't need to select the .zip file indeed, choosing the .md5 file was the right choice. Have you tried running Odin as an administrator?
Click to expand...
Click to collapse
I have not - how would I go about doing that?

tholt2121 said:
I have not - how would I go about doing that?
Click to expand...
Click to collapse
Just right click on the Odin setup file (the .exe file) and select 'Run as an administrator'. Always run as an administrator when doing something in Odin.

Try running as admin for sure. Even though my windows account is admin, odin will not flash properly. I have to run as admin for it to flash.
Sent from a rooted candy bar

Zagnutty said:
Try running as admin for sure. Even though my windows account is admin, odin will not flash properly. I have to run as admin for it to flash.
Sent from a rooted candy bar
Click to expand...
Click to collapse
I tried it running as administrator. It still didn't work. Here is the log from Odin:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sooo.. any other thoughts on this?
I also tried using the .md5 file from this guide:
http://forum.xda-developers.com/showthread.php?t=2158914
Does the fact this is the AT&T version of the tablet make any difference

Yes the reason it isn't working may be that it was not written for the ATT Tab 2. Never try to install anything like this not written for your tablet or phone. Close does not count.
Try this proven method instead:
http://forum.xda-developers.com/showthread.php?t=2342501

Agoattamer said:
Yes the reason it isn't working may be that it was not written for the ATT Tab 2. Never try to install anything like this not written for your tablet or phone. Close does not count.
Try this proven method instead:
http://forum.xda-developers.com/showthread.php?t=2342501
Click to expand...
Click to collapse
Yes!! Thank you so much! That fixed my tablet [and rooted it]. You are amazing. It didn't strike me that my tablet had any different version.. thanks!! Now to figure out what to do with this root access...

Pay close attention. There are no ROMs on XDA for the ATT I497 Tab2. Do not attempt to install a ROM for another version of our Tab.

[Q] Bricked--need some assistance

Alright, going to post here because I have been searching for hours and still no solution that I can come up with. Hoping the experts here can help me with some information on how I can fix my phone (if possible at this point).
Verizon Galaxy Siii (originally with the Hyperdrive Rom) Tried to go to 10.2 CM:
4.1.2 (I believe)
Current status:
Soft Brick (? -i'm guessing it's a soft brick because I can still access download mode).
When I try to access recovery mode it states: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Download Mode Notifications:
Product Name: SCH-i535
Custom Binary Download : Yes (4 counts)
Current Binary: Samsung Official
System Status: Custom
Qualcomm Secureboot: Enabled.
Originally tried to flash 10.2 CM but got stock on the boot up screen so tried to go back to stock.
Phone had some possible hardware/software issues with the phone's screen constantly turning on and off (also the shut down pop-up menu would pop-up); ended up mid=process having my phone shutdown while installing a rom ( i think it was late at night and i was tired )
Tried a few variations to get back to an official release for the Verizon Galaxy SIII. This is what I've been I've trying to flash via odinVRBLK3_Image_WIPE\COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5)
/ --Auto Reboot & F. Reset Time are both checked--/
When I would flash the VRBLK3....tar.md5 file via Odin, it would fail, often at different times during the installation; some within a minute, some near the end of the installation.).
Odin Results:
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __Xmit Write fail
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've been reading that I need to reset the custom binary download back to : No or 0 in order for me to go back to stock? Is this true? My phone is unable to full turn on so the possibility of me using Triangle Away is not possible. Is there any other way I can get my phone back to stock--going delusional and tired from searching all day--need your help. thanks in advance!

jayun28 said:
Alright, going to post here because I have been searching for hours and still no solution that I can come up with. Hoping the experts here can help me with some information on how I can fix my phone (if possible at this point).
Verizon Galaxy Siii (originally with the Hyperdrive Rom) Tried to go to 10.2 CM:
4.1.2 (I believe)
Current status:
Soft Brick (? -i'm guessing it's a soft brick because I can still access download mode).
When I try to access recovery mode it states: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Download Mode Notifications:
Product Name: SCH-i535
Custom Binary Download : Yes (4 counts)
Current Binary: Samsung Official
System Status: Custom
Qualcomm Secureboot: Enabled.
Originally tried to flash 10.2 CM but got stock on the boot up screen so tried to go back to stock.
Phone had some possible hardware/software issues with the phone's screen constantly turning on and off (also the shut down pop-up menu would pop-up); ended up mid=process having my phone shutdown while installing a rom ( i think it was late at night and i was tired )
Tried a few variations to get back to an official release for the Verizon Galaxy SIII. This is what I've been I've trying to flash via odinVRBLK3_Image_WIPE\COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5)
/ --Auto Reboot & F. Reset Time are both checked--/
When I would flash the VRBLK3....tar.md5 file via Odin, it would fail, often at different times during the installation; some within a minute, some near the end of the installation.).
Odin Results:
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __Xmit Write fail
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've been reading that I need to reset the custom binary download back to : No or 0 in order for me to go back to stock? Is this true? My phone is unable to full turn on so the possibility of me using Triangle Away is not possible. Is there any other way I can get my phone back to stock--going delusional and tired from searching all day--need your help. thanks in advance!
Click to expand...
Click to collapse
Also experiencing the same exact thing right now. Already tried Odin on 3 computers. Right now I'm reading up on heimdall and looking for files I can use with it.

I've had success with the images in this thread:
http://forum.xda-developers.com/showthread.php?t=1984436

BattsNotIncld said:
I've had success with the images in this thread:
http://forum.xda-developers.com/showthread.php?t=1984436
Click to expand...
Click to collapse
failed
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_I535VRBMA2_nowipe.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> __Xmit Write fail
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
""

A few things:
1) Are you using a good quality USB cable? Certain cheap aftermarket ones will cause ODIN fail issues. The one from Samsung that came with the phone is good.
2) Try a different USB port, specifically one connected directly to the motherboard (if you're using a tower pc hook it up to the back, on a laptop hook it up to the usb ports next to the video/audio inputs)
3) Make sure all the correct Samsung drivers are installed on to your PC, and reboot the PC after they are installed.
4) What version of ODIN are you using? v3.07 is what I use and I've never had issues

BattsNotIncld said:
A few things:
1) Are you using a good quality USB cable? Certain cheap aftermarket ones will cause ODIN fail issues. The one from Samsung that came with the phone is good.
2) Try a different USB port, specifically one connected directly to the motherboard (if you're using a tower pc hook it up to the back, on a laptop hook it up to the usb ports next to the video/audio inputs)
3) Make sure all the correct Samsung drivers are installed on to your PC, and reboot the PC after they are installed.
4) What version of ODIN are you using? v3.07 is what I use and I've never had issues
Click to expand...
Click to collapse
Just to add to this, if you are using a laptop it should be plugged in while doing this. Odd thing I've seen over the years is a lot of failures with ODIN on a laptop if it is not plugged in.

BattsNotIncld said:
A few things:
1) Are you using a good quality USB cable? Certain cheap aftermarket ones will cause ODIN fail issues. The one from Samsung that came with the phone is good.
2) Try a different USB port, specifically one connected directly to the motherboard (if you're using a tower pc hook it up to the back, on a laptop hook it up to the usb ports next to the video/audio inputs)
3) Make sure all the correct Samsung drivers are installed on to your PC, and reboot the PC after they are installed.
4) What version of ODIN are you using? v3.07 is what I use and I've never had issues
Click to expand...
Click to collapse
Got the process to pass but now I'm stuck at the Verizon 4G LTE rainbow screen for approximately 30+ minutes :\

jayun28 said:
Got the process to pass but now I'm stuck at the Verizon 4G LTE rainbow screen for approximately 30+ minutes :\
Click to expand...
Click to collapse
Factory reset?
Sent from my SCH-I535 using Tapatalk

Sandman-007 said:
Factory reset?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Yes, a factory reset will work for sure.
Sent from my SCH-I535 using Tapatalk 2

Locklis Health
Back to stock! Appreciate all the help!

Stuck at Samsung boot screen and can't fix it? (Ubuntu Touch)

I installed Ubuntu Touch and as it says on their wiki page, there are known issues like device fails to boot after rebooting, and I'm stuck at this point.
When I boot i get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and when trying to turn it off by holding on the power button for 5-10seconds it turns black for a few seconds and comes right back to the samsung boot screen.
They do say how to fix this in the wiki, but I got no idea how I can get access to those files and modify them
I would have posted on their development thread, but as I don't have 10 posts, I can't do that.

jeggy said:
I installed Ubuntu Touch and as it says on their wiki page, there are known issues like device fails to boot after rebooting, and I'm stuck at this point.
When I boot i get this:
and when trying to turn it off by holding on the power button for 5-10seconds it turns black for a few seconds and comes right back to the samsung boot screen.
They do say how to fix this in the wiki, but I got no idea how I can get access to those files and modify them
I would have posted on their development thread, but as I don't have 10 posts, I can't do that.
Click to expand...
Click to collapse
although i haven't tried ubuntu touch still you can try going into download mode by holding power button and volume down button both together and flash stock rom or
try going into recovery mode and restore cwm or twrp backup which you must have made
HIT THANKS IF IT HELPED

Jaspreet.master7 said:
although i haven't tried ubuntu touch still you can try going into download mode by holding power button and volume down button both together and flash stock rom or
try going into recovery mode and restore cwm or twrp backup which you must have made
HIT THANKS IF IT HELPED
Click to expand...
Click to collapse
yeah, i was thinking that, but I don't know how to? The only thing I have access to is "Download Mode", so I have been trying to find a way to install a new ROM from odin, but with no luck. I'm still a beginner to these stuff, so if you could show me a way to use twrp or cwm to install a new rom that would be great I used twrp to install Ubuntu Touch, but I needed access to Android to install twrp.
I didn't do a real backup before, but I saved all the important data online. I just want to make fresh install of Android, don't care if it's the original from Samsung or some custom rom

jeggy said:
yeah, i was thinking that, but I don't know how to? The only thing I have access to is "Download Mode", so I have been trying to find a way to install a new ROM from odin, but with no luck. I'm still a beginner to these stuff, so if you could show me a way to use twrp or cwm to install a new rom that would be great I used twrp to install Ubuntu Touch, but I needed access to Android to install twrp.
I didn't do a real backup before, but I saved all the important data online. I just want to make fresh install of Android, don't care if it's the original from Samsung or some custom rom
Click to expand...
Click to collapse
if you have access to DOWNLOAD MODE then
download stock rom from sammobile
unzip the file and then u will obtain md5 file
now use odin3 dont check anything in it
select pda and open the md5 fie
wait till it checks the file
go to download mode and plug via usb and flash
if you get a bootloop keep holding ppower and volume up button for recovery mode
wipe data and cache rebbot

Jaspreet.master7 said:
if you have access to DOWNLOAD MODE then
download stock rom from sammobile
unzip the file and then u will obtain md5 file
now use odin3 dont check anything in it
select pda and open the md5 fie
wait till it checks the file
go to download mode and plug via usb and flash
if you get a bootloop keep holding ppower and volume up button for recovery mode
wipe data and cache rebbot
Click to expand...
Click to collapse
It's stuck at
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XWALI4_N8010O2UALI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!

Jaspreet.master7 said:
if you have access to DOWNLOAD MODE then
download stock rom from sammobile
unzip the file and then u will obtain md5 file
now use odin3 dont check anything in it
select pda and open the md5 fie
wait till it checks the file
go to download mode and plug via usb and flash
if you get a bootloop keep holding ppower and volume up button for recovery mode
wipe data and cache rebbot
Click to expand...
Click to collapse
Hi, I have same problem My Samsung Galaxy Note 10.1 stuck at opening logo as well, further i can't able to detect my Note in ODIN(or my Laptop is not detecting any USB, even after connecting Note) , then how can i install and perform these steps. Thanks in Advance

jeggy said:
It's stuck at
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XWALI4_N8010O2UALI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
Click to expand...
Click to collapse
OK
CAN U PLZ TELL ME WHAT VERSION OF ANDROID DID YOUR TABLET HAVE BEFORE INSTALLING UBUNTU
WAS IT JB OR ICS
IF IT WAS ICS THEN U CAN TRY AND USE THE ODIN PROVIDED IN THE ATTACHMENTS
IF THAT DOES NOT HELP
YOU ARE INSTALLING UNITED KINGDOM ROM , REGION CODE O2U [ CORRECT ME ]
Try downloading the united kingdom rom REGION CODE: BTU
The latest is JB
And flash again and report
AND ALSO WHEN IN THE PREVIOUS POST I MENTIONED DON'T CHECK ANYTHING
I MEANT JUST OPEN ODIN SELECT PDA AND FLASH

Jaspreet.master7 said:
OK
CAN U PLZ TELL ME WHAT VERSION OF ANDROID DID YOUR TABLET HAVE BEFORE INSTALLING UBUNTU
WAS IT JB OR ICS
IF IT WAS ICS THEN U CAN TRY AND USE THE ODIN PROVIDED IN THE ATTACHMENTS
IF THAT DOES NOT HELP
YOU ARE INSTALLING UNITED KINGDOM ROM , REGION CODE O2U [ CORRECT ME ]
Try downloading the united kingdom rom REGION CODE: BTU
The latest is JB
And flash again and report
AND ALSO WHEN IN THE PREVIOUS POST I MENTIONED DON'T CHECK ANYTHING
I MEANT JUST OPEN ODIN SELECT PDA AND FLASH
Click to expand...
Click to collapse
I had Android 4.1.2 Jelly Bean, and the only reason I installed UK was becuase I'm from Faroe Islands, and it's not listed there, it could be the danish one, but that wasn't listed either, so I have no idea which one to choose. And this file doesn't exist anymore :/ http://www.sammobile.com/firmwares/3/?download=20586 so what should i try?

jeggy said:
I had Android 4.1.2 Jelly Bean, and the only reason I installed UK was becuase I'm from Faroe Islands, and it's not listed there, it could be the danish one, but that wasn't listed either, so I have no idea which one to choose. And this file doesn't exist anymore :/ http://www.sammobile.com/firmwares/3/?download=20586 so what should i try?
Click to expand...
Click to collapse
ok so u had Jb BEFORE
use this link http://samsung-updates.com/details/21145/Galaxy_Note_10.1_WiFi/GT-N8010/BTU/N8010XXUCMG1.html
its the same file u r trying to download only diff website
hope this will solve ur problem

Jaspreet.master7 said:
ok so u had Jb BEFORE
use this link http://samsung-updates.com/details/21145/Galaxy_Note_10.1_WiFi/GT-N8010/BTU/N8010XXUCMG1.html
its the same file u r trying to download only diff website
hope this will solve ur problem
Click to expand...
Click to collapse
It's stuck at NAND Write Start!! again, could it be the version of Odin that im running? I see there are thousands of thousands of versions of Odin out there

jeggy said:
It's stuck at NAND Write Start!! again, could it be the version of Odin that im running? I see there are thousands of thousands of versions of Odin out there
Click to expand...
Click to collapse
try to use the odin i provided

Hi! Try this video:
http://www.youtube.com/watch?feature=player_detailpage&v=_PSt8b5D2dM#t=322
Also, have you installed the samsung USB drivers?

Jaspreet.master7 said:
try to use the odin i provided
Click to expand...
Click to collapse
Hi,
Did you try to use ADB to find out whether your tablet can communicate with Odin??
Try this command:
adb devices
And reply with the output.
About the Jelly bean firmware, may be you can use other countries ( e.g. Dutch or German ) which is available for your device??
By the way, which recovery do you have and can you get into it??

rtunru said:
Hi,
Did you try to use ADB to find out whether your tablet can communicate with Odin??
Try this command:
adb devices
And reply with the output.
About the Jelly bean firmware, may be you can use other countries ( e.g. Dutch or German ) which is available for your device??
By the way, which recovery do you have and can you get into it??
Click to expand...
Click to collapse
I ran that, and i got an empty list, I tried while it's in download mode and while it's turned off:
Code:
C:\Users\Jeggy\cminstaller\bundle\win32>adb.exe devices
List of devices attached
And yes I have Samsung USB Drivers installed. But I don't think my device is working anymore, I'm not getting the samsung boot screen anymore, the absolutely only thing I have access to now is download mode. I uploaded a video to youtube showing how it looks now:
http://www.youtube.com/watch?v=ZgtZPHjoudw
Or do you guys still have hope for me, as I still have access to download mode?

jeggy said:
I ran that, and i got an empty list, I tried while it's in download mode and while it's turned off:
Code:
C:\Users\Jeggy\cminstaller\bundle\win32>adb.exe devices
List of devices attached
And yes I have Samsung USB Drivers installed. But I don't think my device is working anymore, I'm not getting the samsung boot screen anymore, the absolutely only thing I have access to now is download mode. I uploaded a video to youtube showing how it looks now:
http://www.youtube.com/watch?v=ZgtZPHjoudw
Or do you guys still have hope for me, as I still have access to download mode?
Click to expand...
Click to collapse
First of all, do not panic.
You still have the download mode
Second, the problem is clear, your adb driver is not installed properly. Solve this and then use ODIN to flash a stock firmware for your device.
By the way what is your device?? N8010??

rtunru said:
First of all, do not panic.
You still have the download mode
Second, the problem is clear, your adb driver is not installed properly. Solve this and then use ODIN to flash a stock firmware for your device.
By the way what is your device?? N8010??
Click to expand...
Click to collapse
yes I have N8010. Could you list all the things I should have installed, so maybe I can try on another computer?

jeggy said:
yes I have N8010. Could you list all the things I should have installed, so maybe I can try on another computer?
Click to expand...
Click to collapse
OK, I also have N8010
I think you did not do the steps at the right moments.
First of all we need to fix the ADB issue.
Therefore you need to do the following:
1. Put your your N8010 in download mode and start your ODIN
2.Connect the USB cable to your PC then to your tablet.
3.If the adb driver is not installed correctly, it will now.
4.Check your device manager for this.
5.If OK then
6. DO adb devices..Now you should get an output.
7.Check whether your ODIN also detects your tablet ( ID:com shows in color ).
8.Go back to Odin.
9.Flash your firmware with it.
10.If succeeded, your N8010 will come back to live
Good luck

rtunru said:
OK, I also have N8010
I think you did not do the steps at the right moments.
First of all we need to fix the ADB issue.
Therefore you need to do the following:
1. Put your your N8010 in download mode and start your ODIN
2.Connect the USB cable to your PC then to your tablet.
3.If the adb driver is not installed correctly, it will now.
4.Check your device manager for this.
5.If OK then
6. DO adb devices..Now you should get an output.
7.Check whether your ODIN also detects your tablet ( ID:com shows in color ).
8.Go back to Odin.
9.Flash your firmware with it.
10.If succeeded, your N8010 will come back to live
Good luck
Click to expand...
Click to collapse
That one which is selected gets there when connecting to the pc, and when removing the usb it gets removed, and the other that is unknown I got no idea what it is, probably just some random driver I'm missing, I installed Windows 8 myself.
Even with the "Samsung Mobile USB" driver in the device manager I get an empty list when running adb devices
I just tested running adb devices with my phone and it worked right away:
Code:
C:\Users\Jeggy>adb devices
List of devices attached
47901ea687d530a8 device
And this is while having my tablet connected
EDIT
and when it said "NAND Write Start!!" it did change something on the tablet itself, I got a blue loading bar(The same one as when rooting but this time not moving) under "Do not turn off target!!" but it started at 100% and never changed

jeggy said:
I just tested running adb devices with my phone and it worked right away:
Code:
C:\Users\Jeggy>adb devices
List of devices attached
47901ea687d530a8 device
And this is while having my tablet connected
Click to expand...
Click to collapse
This means that your PC and tablet are connected and the ADB driver is installed correctly.
At this point you must see the comm:id field ofOIDIN changes color.
At this point you can choose your firmware and then click on start.
EDIT
and when it said "NAND Write Start!!" it did change something on the tablet itself, I got a blue loading bar(The same one as when rooting but this time not moving) under "Do not turn off target!!" but it started at 100% and never changed
Click to expand...
Click to collapse
Are you sure you are using a total package firmware and NOT the one with 3 packages??
In the latter case you need to fill PDA, modem and CSC in ODIN

rtunru said:
This means that your PC and tablet are connected and the ADB driver is installed correctly.
At this point you must see the comm:id field ofOIDIN changes color.
At this point you can choose your firmware and then click on start.
Are you sure you are using a total package firmware and NOT the one with 3 packages??
In the latter case you need to fill PDA, modem and CSC in ODIN
Click to expand...
Click to collapse
It does change color and get "0:[COM4]", and I don't know which 3 packages you are talking about, I am trying the one I got from samMobile which is a .tar.md5 file and is a 1.5GB file. I never tried CSC and don't know what it is and how to get one
http://khp.randompoop.net/uploads/AndroidHelp123.png

[Q] Odin Write Operation Failing on GT-N7000

My phone appears to be in a bootloop as it is stuck on the Samsung Galaxy Note GT-N7000 Screen. I cannot access recovery mode, I can only access Downloading Mode. It started when I used Rom Manager to flash CWM to my device and do a backup. I have tried flashing a stock ROM to my device but ODIN (v3.9) gives me the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ORALT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
And shows a FAIL at the top in red.
Does anyone have any suggestions? Any help would be much appreciated.
Thank you.
Update:
After searching around it appears I may need to use PIT file, is this the case and does anyone know where I would get one for my device?

ivel97 said:
My phone appears to be in a bootloop as it is stuck on the Samsung Galaxy Note GT-N7000 Screen. I cannot access recovery mode, I can only access Downloading Mode. It started when I used Rom Manager to flash CWM to my device and do a backup. I have tried flashing a stock ROM to my device but ODIN (v3.9) gives me the following error:
And shows a FAIL at the top in red.
Does anyone have any suggestions? Any help would be much appreciated.
Thank you.
Update:
After searching around it appears I may need to use PIT file, is this the case and does anyone know where I would get one for my device?
Click to expand...
Click to collapse
Sure HERE you can download ODIN 1.85 + PIT file. Make sure to choose the correct PIT size 16/32GB

ivel97 said:
My phone appears to be in a bootloop as it is stuck on the Samsung Galaxy Note GT-N7000 Screen. I cannot access recovery mode, I can only access Downloading Mode. It started when I used Rom Manager to flash CWM to my device and do a backup. I have tried flashing a stock ROM to my device but ODIN (v3.9) gives me the following error:
And shows a FAIL at the top in red.
Does anyone have any suggestions? Any help would be much appreciated.
Thank you.
Update:
After searching around it appears I may need to use PIT file, is this the case and does anyone know where I would get one for my device?
Click to expand...
Click to collapse
I don't think so that the problem is the PIT file. Because it fails after SetupConnection. Are you sure you are you using the original usb cable. You can try with other usb cables to confirm it.

root-expert said:
I don't think so that the problem is the PIT file. Because it fails after SetupConnection. Are you sure you are you using the original usb cable. You can try with other usb cables to confirm it.
Click to expand...
Click to collapse
Suggested ODIN version for GT-N7000 is 1.85 (as I linked it). Could also be related to a wrong version of ODIN.

Thanks for the suggestions. I have tried different versions of ODIN. I'll have a go with different USB cables.

root-expert said:
I don't think so that the problem is the PIT file. Because it fails after SetupConnection. Are you sure you are you using the original usb cable. You can try with other usb cables to confirm it.
Click to expand...
Click to collapse
I don't have the original Samsung charging cable that came with my device. I looked online for some and found one that claims to work for all Note models, does that sound right?

root-expert said:
I don't think so that the problem is the PIT file. Because it fails after SetupConnection. Are you sure you are you using the original usb cable. You can try with other usb cables to confirm it.
Click to expand...
Click to collapse
I bought a new cable for the Note, still getting the same error. Any suggestions?

ivel97 said:
I bought a new cable for the Note, still getting the same error. Any suggestions?
Click to expand...
Click to collapse
Kill all kies proccess and try again. Also enable usb debugging.

root-expert said:
Kill all kies proccess and try again. Also enable usb debugging.
Click to expand...
Click to collapse
I uninstalled keis (not the USB driver) and I can't enable USB debugging because the phone is in a boot loop.

Then make sure that you have installed the correct drivers. Also try to download odin from other sites.

root-expert said:
Then make sure that you have installed the correct drivers. Also try to download odin from other sites.
Click to expand...
Click to collapse
Tried both. Sorry.
I think I'll just give up and take it to a phone repair shop, see what they can do. :crying:

ivel97 said:
Tried both. Sorry.
I think I'll just give up and take it to a phone repair shop, see what they can do. :crying:
Click to expand...
Click to collapse
Remove your bettery and leave it for 5 minutes. Then go again to download mode and flash with odin. Also you can try defferent usb ports and ensure that you don't use a usb hub! Finally nesure that you are running odin as admin.

root-expert said:
Remove your bettery and leave it for 5 minutes. Then go again to download mode and flash with odin. Also you can try defferent usb ports and ensure that you don't use a usb hub! Finally nesure that you are running odin as admin.
Click to expand...
Click to collapse
ODIN got a little further this time. Still stuck on cache.img, though.
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> cache.img
Click to expand...
Click to collapse

ivel97 said:
ODIN got a little further this time. Still stuck on cache.img, though.
Click to expand...
Click to collapse
Now you have to check that the file you have downloaded is correct. Maybe you can check the md5 checksum or something. Or simply redownload it. Which step fixed your issue?

root-expert said:
Now you have to check that the file you have downloaded is correct. Maybe you can check the md5 checksum or something. Or simply redownload it. Which step fixed your issue?
Click to expand...
Click to collapse
Changing USB port I think, maybe in conjunction with new cable because I've tried changing ports before. Also made sure I started in admin. Odin checks the md5 checksum automatically but I'm downloading it again. Got the stock firmware off sammobile.com . Using the UK Orange version - XXLT9. I think that is the right one from memory. Can't check build setting because I'm stuck in bootloop. Pain.
EDIT:
Damn. Just tried again with ODIN 1.85 and it gets stuck on setup connection again. Same with v3.09.

ivel97 said:
Changing USB port I think, maybe in conjunction with new cable because I've tried changing ports before. Also made sure I started in admin. Odin checks the md5 checksum automatically but I'm downloading it again. Got the stock firmware off sammobile.com . Using the UK Orange version - XXLT9. I think that is the right one from memory. Can't check build setting because I'm stuck in bootloop. Pain.
EDIT:
Damn. Just tried again with ODIN 1.85 and it gets stuck on setup connection again. Same with v3.09.
Click to expand...
Click to collapse
Do the same with the battery

root-expert said:
Do the same with the battery
Click to expand...
Click to collapse
Taking out the battery fixed the setup connection error. Thanks!!! Still failing on cache.img, though. Waiting for the stock Rom from sammobile.com to finish downloading and I'll try again.

root-expert said:
Do the same with the battery
Click to expand...
Click to collapse
Redownloaded the stock firmware from sammobile and tried again. Failing after cache.img.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000ORALT3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

ivel97 said:
Redownloaded the stock firmware from sammobile and tried again. Failing after cache.img.
Click to expand...
Click to collapse
Have you already try to flash .pit file. I recomend you don't because if odin fail to flash it your phone will f*** up. So this is your last resort. You can try different roms. You can try to use heimdall for windows to flash your firmware. Heimdall is more reliable

root-expert said:
Have you already try to flash .pit file. I recomend you don't because if odin fail to flash it your phone will f*** up. So this is your last resort. You can try different roms. You can try to use heimdall for windows to flash your firmware. Heimdall is more reliable
Click to expand...
Click to collapse
Not tried to flash .pit file. I'll try heimdall, thanks.

Trying to unroot my Note 5 help!! please

so i have Kies not running in the background and have downloaded the appropriate Firmware from SAM Mobile but odin is still giving me issues saying...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Odin has been Admined, and i followed a couple of youtube videos but still once again i keep failing. HELP PLEASE.

[email protected] said:
so i have Kies not running in the background and have downloaded the appropriate Firmware from SAM Mobile but odin is still giving me issues saying...
Odin has been Admined, and i followed a couple of youtube videos but still once again i keep failing. HELP PLEASE.
Click to expand...
Click to collapse
Need some more info on your setup.
Laptop or desktop, location of USB ports (hubs and front USB can be problematic), OS, ODIN version.

NotATreoFan said:
Need some more info on your setup.
Laptop or desktop, location of USB ports (hubs and front USB can be problematic), OS, ODIN version.
Click to expand...
Click to collapse
Im currently using my Samsung R580 Laptop with 2 USB 2.0 and 1 3.0 USB. Odin Version 3.10.7
and my Model number for the Phone is N920TZWATMB Currently with Noble Kernel V0.1
Knox Counter: 1
If you need any more information please ask.

re: odin flash firmware
[email protected] said:
so i have Kies not running in the background and have downloaded the appropriate Firmware from SAM Mobile but odin is still giving me issues saying...
Odin has been Admined, and i followed a couple of youtube videos but still once again i keep failing. HELP PLEASE.
Click to expand...
Click to collapse
Did you make sure to enable the "OEM Unlock" in settings>developers options before odin flashing?
If it's not enabled enable it and do the odin flash again.
By the way, you did not need to odin flash stock firmware to unroot.
All you needed to do is to go into your app drawer and open supersu
then in it's settings you simply disable it.
If you wanted to leave the phone unrooted then after disabling supersu
you can simply uninstall it.
Good luck,
Have a great day!

My OEM Unlock switch has been on since a while ago. The thing is when ever i try to update my phone to the latest firmware it stays at 0 on my computer. Ive tried that method before but i still have problems with the random reboot.

[email protected] said:
My OEM Unlock switch has been on since a while ago. The thing is when ever i try to update my phone to the latest firmware it stays at 0 on my computer. Ive tried that method before but i still have problems with the random reboot.
Click to expand...
Click to collapse
Have you tried all the USB ports? USB 3.0 ports can be picky and sometimes ODIN and ADB commands don't work properly. Also make sure to either use the official Samsung cable or at least one that can Fast Charge when plugged into the phone. The cheaper cables will sometimes cause communication issues.
Also, what version of Windows? I'm currently on Windows 10 x64, but also used ODIN on my Galaxy S5 when I was on Windows 8.1 x64.

I have tried all my cables and the original samsung died on me cuz of the nephews

Can i get an mod to lock this post? I found what i was doing wrong. Thanks to all those who tried helping!

[email protected] said:
Can i get an mod to lock this post? I found what i was doing wrong. Thanks to all those who tried helping!
Click to expand...
Click to collapse
can you share what you were doing wrong? i am having the same issue and might be doing the same.
Thanks

ogsmokey said:
can you share what you were doing wrong? i am having the same issue and might be doing the same.
Thanks
Click to expand...
Click to collapse
I downloaded the latesr smart switch and looked at the latest update. Then look for the same update on Sammobile. So from COJ5 to COI5.

The latest version is coj5 in order to go back to stock you have to flash it via odin and make sure you factory reset after that if it bootloop after flashing
Sent From My SM-N920T Using Tapatalk
TEKHD ROM[Advanced Hybrid Edition ll][UrV4.1]