Related
Let me start by saying the Diztronic TPU is amazing and absolutely perfect in every way, except one. The top and bottom chrome bezel are getting scratched by the sharp edges of the case. It's not from dirt and dust or just rubber marks, they're actual little scratches. I'm looking to buy one of the "S-Line" cases (on amazon because I have gift card credit). Others have mentioned that the edge is not as sharp on these and I do not mind the buttons being harder to press. Are the i-Blason and Cimo brands essentially the same or what? The i-Blason looks a little more refined and is rated better. Thanks!
edit: forgot, I have an Ionic guardian and it's great as well, but just too pocket sticky for me. Definitely is great protection though.
The bezel is so weak it even scratches by sliding the phone in and out of your pocket. So, not a big deal imho!
My Diztronic case hasn't scratched my bezel? lol
FatalityBoyZahy said:
My Diztronic case hasn't scratched my bezel? lol
Click to expand...
Click to collapse
I've read threads of many other people complaining about the same issue. Even the Diztronic store on amazon has complaints of it. I remember having this issue with their cases on my Galaxy Nexus as well.
If your bezel isn't scratched yet, consider yourself lucky.
However, aside from that the Diztronic is the most solid TPU case you will find.
tomhub389 said:
Let me start by saying the Diztronic TPU is amazing and absolutely perfect in every way, except one. The top and bottom chrome bezel are getting scratched by the sharp edges of the case. It's not from dirt and dust or just rubber marks, they're actual little scratches. I'm looking to buy one of the "S-Line" cases (on amazon because I have gift card credit). Others have mentioned that the edge is not as sharp on these and I do not mind the buttons being harder to press. Are the i-Blason and Cimo brands essentially the same or what? The i-Blason looks a little more refined and is rated better. Thanks!
edit: forgot, I have an Ionic guardian and it's great as well, but just too pocket sticky for me. Definitely is great protection though.
Click to expand...
Click to collapse
This case will not actually scratch the phone, but dirt and dust will.
BravoMotorola said:
This case will not actually scratch the phone, but dirt and dust will.
Click to expand...
Click to collapse
I disagree, my phone simply does not get exposed to dirt or sand that would scratch. Take of the case and rub your finger just inside the top and bottom inside edge of it. It's fairly sharp for TPU
TPU is just plastic, it won't scratch other plastic. That would be a horrible feature for a case lol.
tomhub389 said:
I disagree, my phone simply does not get exposed to dirt or sand that would scratch. Take of the case and rub your finger just inside the top and bottom inside edge of it. It's fairly sharp for TPU
Click to expand...
Click to collapse
Feels like any other case? lol
Sent from my Nexus 4 using xda premium
i have both diztronic and i-blason.
i like the diztronic better. the i-blason is softer but it fits loose. diztronic fits like a glove. you will get more dirt/grit/crap between your phone and the i-blason case due to its fitment.
from all the phones ive owned with a shiney bezel, they all get micro scratches on them. theres no avoiding it unless you get a full body cover like xoskin/xtremeguard/bodyarmors/etc that covers the bezel. just use your phone as intended. any cases will get crap trap between your phone and case. just be sure to take it off regularly to clean it out.
I have the diztronic case on my n4 and the quality and fit is outstanding. I bought it off eBay and had it shipped to the UK from the States and it was still cheaper by a long shot than anything available here in the UK.
I use it with an invisible shield front and back protector and although it was fiddly getting it on and making sure the screen protector didn't lift, its now on and I have no lift at all.
Sent from my Nexus 4 using xda premium
AW: Diztronic vs i-Blason vs Cimo TPU cases
I can too say that diztronic is the best tpu out there.
Because different types of plastic can't have different levels of hardness and different surface finishes (like polished chrome plastic) aren't more vulnerable to scuffing. Yes, they're really small fine scratches but they're there and I wasn't expecting them.
Sent from my Nexus 4 using xda app-developers app
I have a Diztronic case and the fit is prefect. No scratching at all. The only issue I have is the screen protector lifts when the case goes on or off. The film is centered well just for some reason always snags a bit on the bottom corners.
Sent from my Nexus 4
is there really a difference between a 1$ TPU case and all the other ones ? I thought they were all made in the same factory...
Hey guys, ive never bought a tempered glass screen protector, and im wondering how case friendly they are? Im due for my upgrade on monday so id like to get one on order as long as its G2G with the bodyglove dropsuit rugged series case. Thanks
hi,
I did not have any problem but the case I use is one you find in the att store. it's not a 'slim' case by any stretch its a very thickish rubbery type thing for maxiumum protection. you could probably drop kick the phone and not even phase it.
the temperd glass with the case I'm using is no problem -- both I got in the att store when upgraded. my advice if you are shopping around online is to find people who use the case you do and ask them
munoz303 said:
Hey guys, ive never bought a tempered glass screen protector, and im wondering how case friendly they are? Im due for my upgrade on monday so id like to get one on order as long as its G2G with the bodyglove dropsuit rugged series case. Thanks
Click to expand...
Click to collapse
i use a Spigen Slim Armor with my glass screen protector without any problems, also, they look fantastic and feel very nice in the hand:good:
Sinchero said:
i use a Spigen Slim Armor with my glass screen protector without any problems, also, they look fantastic and feel very nice in the hand:good:
Click to expand...
Click to collapse
+1
I have 2 different versions of the Spigen and love the tempered glass I got from Luvvitt and Amazon
I have a Zagg Glass on mine and it fits fine into the Otterbox Defender.
I recommend Nillkin, the glass has beveled edges which will slide on the object that makes contact with the glass' edges and therefore prevent movement pressure. If you decided to go for another brand, I suggest you also look for beveled edges.
to be honest id say it fits most of the cases.. only bumpers might have some problems
Same here as Taz420nj, Zagg Glass and a Otterbox Defender case. I should have my Trident Kraken case this coming Tuesday. Best of both worlds as far as protection goes.
munoz303 said:
Hey guys, ive never bought a tempered glass screen protector, and im wondering how case friendly they are? Im due for my upgrade on monday so id like to get one on order as long as its G2G with the bodyglove dropsuit rugged series case. Thanks
Click to expand...
Click to collapse
I have this one from Cybertech. It claims to be 0.15mm thick. It is very thin so that seems possible. It is unscathed after a month.
They are very inexpensive ($6.49 w/free shipping) so I may order 2-3 more.
It hasn't interfered with any of my cases. My daily case is a Caseology but I have a few others that I sometimes use..
There have been a lot of threads and post about SPIGEN cases in particular scratching the metal frame of the N4.
What cases do NOT do this?
Thanks in advance
I'm using a Spigen Slim Armor for a week so far and no scratches on the frame. Don't see how it would either as only the soft inner tpu liner makes contact with it.
None, because it's not the case but the polished aluminum lip of the Note 4 that's the problem. Unless you live in a hermetically sealed environment, it'll probably end up scratched.
A few people have reported scratches with the Spigen cases but it'll happen with an otterbox, an UAG, a hardshell or a TPU case. For every person who doesn't have scratches, there will one someone who has scratches from using the same case.
Hey, perfect protection. I had S4 with S-View cover with Qi charging and it was fantastic. None scratches and wireless charging is awesome. I bought Note 4 (SM-N910F) Black with Samsung EP-VN910I Black. Fantastic
dr.m0x said:
I'm using a Spigen Slim Armor for a week so far and no scratches on the frame. Don't see how it would either as only the soft inner tpu liner makes contact with it.
Click to expand...
Click to collapse
My slim armor has scratched the top aluminum of my Note 4...bummer
Kawaisa said:
None, because it's not the case but the polished aluminum lip of the Note 4 that's the problem. Unless you live in a hermetically sealed environment, it'll probably end up scratched.
A few people have reported scratches with the Spigen cases but it'll happen with an otterbox, an UAG, a hardshell or a TPU case. For every person who doesn't have scratches, there will one someone who has scratches from using the same case.
Click to expand...
Click to collapse
yogi217 said:
My slim armor has scratched the top aluminum of my Note 4...bummer
Click to expand...
Click to collapse
I'm also beginning to think that it's not the case but small bits of dirt being trapped between the case and frame that might be the real issue.
On some cases it's the material and on others it's particles. Either way, the aluminum is going to get marked up. Just can't worry about it....
I wish Samsung would have just stuck to plastic instead of trying to make it feel premium. Since I always put a case on my phone, I never see or touch the outside of the naked phone and would not have to worry about the metal frame. The all plastic phone was fine with me.
just put a piece of scotch tape over the metal frame before installing the case
racinwarrior said:
just put a piece of scotch tape over the metal frame before installing the case
Click to expand...
Click to collapse
Kapton tape would work better. The adhesive is silicone based, so it will rub off easier.
Thanks for all the responses.
decided to roll naked
MrBShah said:
Thanks for all the responses.
decided to roll naked
Click to expand...
Click to collapse
I think I'm doing the same. Picked up a leather pouch from Amazon (bear motion) for 10 bucks when I need it.
I have my phone in a Ringke case since the moment I took it out of the box. My boyfriend doesn't use a case at all. Yesterday I took my phone out of the case to see how the metal rim is holding up in comparison to his, which is all scratched up. They are both just as damaged! Bottom line: it's not the cases, it will happen regardless. It appears to be so sensitive that the slightest speck of dust creeping in a case, or in a pocket, or bag, ruins it.
iR¡[email protected]!* from i9505 via Tapatalk 4
iridaki said:
I have my phone in a Ringke case since the moment I took it out of the box. My boyfriend doesn't use a case at all. Yesterday I took my phone out of the case to see how the metal rim is holding up in comparison to his, which is all scratched up. They are both just as damaged! Bottom line: it's not the cases, it will happen regardless. It appears to be so sensitive that the slightest speck of dust creeping in a case, or in a pocket, or bag, ruins it.
iR¡[email protected]!* from i9505 via Tapatalk 4
Click to expand...
Click to collapse
Wow. Thanks for sharing!
IBNobody said:
Kapton tape would work better. The adhesive is silicone based, so it will rub off easier.
Click to expand...
Click to collapse
That tape is cheap on eBay; plenty $1 links for 5mm x 100 feet , but lead time is about 2 weeks; slow boat from China.
So far, I've only scratched the edges near the USB port (minor). Odd how the cases don't offer more protection around the ports. Should have just left the shipping tape on until this arrived. I've dropped a lot of phone's but haven't cracked a screen and don't want to start doing that so I'll try the generous application of the tape and hope it sticks well with swapping the case a lot because it looks like I'll be using a soft case for home and my Verus Thor for outings.
Thanks for the suggestion.
My Note 4 is 4 days old and I have removed one of my spigen cases a few times. The metal frame has got a few nicks. My iPhone 5s, which I babied, has tons of nicks and scratches. Though not completely visible unless you look for them. With these aluminum/metal phones this is normal.
I feel like the first scratch/nick on your phone is like the first scratch/dent on your new car. The first one is always the one that eats away at you the most and even if it's invisible to everyone else, you can pinpoint the exact location of the damage. I'm kind of surprised that there hasn't been a conclusive way to restore the chamfered edges yet though.
I haven't noticed it being sensitive. Mine has been naked since day 1. Owned it for a month or so and even have been bold and put it in the cup holder when driving. Not a single scratch *knock on wood*. I am looking into vinyls though, that's my current new trend. Started with my old m8, now gonna skin the note.
The Otterbox Defender and Commuter Series cases do not scratch the frame. I was very skeptical with the Defender Series, but was surprised by the results.
h3ck said:
I haven't noticed it being sensitive. Mine has been naked since day 1. Owned it for a month or so and even have been bold and put it in the cup holder when driving. Not a single scratch *knock on wood*. I am looking into vinyls though, that's my current new trend. Started with my old m8, now gonna skin the note.
Click to expand...
Click to collapse
I'm not saying that any of our phones are deeply scratched either, but there is no doubt that the coating is not durable, as reported by many users.
arjun90 said:
The Otterbox Defender and Commuter Series cases do not scratch the frame. I was very skeptical with the Defender Series, but was surprised by the results.
Click to expand...
Click to collapse
Do you think a Defender case and a tempered glass screen protector could go together? I'm considering Otterbox but only if I can use my own screen protector.
Sent from my SM-P600 using Tapatalk
Looking into buying a case tonight. Any takers?
Before you read lol this is overkill but Decided to go with tempered glass from Pleson. I've used them before on my Moto X '15 no problems!
Going to see how the tempered glass and clear case work out!
I'm going to give the protector a try only because I want to have a glass screen to slide my finger on. Plus, who needs to worry about scratches, right? I think it'll work out well because the screen seems flat. I'm still deciding if I'm going to get a case or not.
A glass screen protector is a really good idea to improve the feel. I'd try to get away with just a bumper for a case. Full disclosure, I played with them at Verizon yesterday but I don't have one.
Sent from my XT1575 using XDA-Developers mobile app
Purchased an Otterbox Defender case. I needed tough case and didn't have any experience with heavy duty cases other than Supcase's Unicorn Beetle, Otterbox's Defender, and Trident Case's Kraken. Supcase has one for preorder and I doubt the Trident will release a Kraken case for the Moto Z Droid.
The Defender is what I expected; A durable inside case surrounded by a softer shell. Had the same terrible plastic screen protector as every other Otterbox case. Popped it off the case, removed the adhesive with the edge of a blade.; With a tempered glass screen on the phone itself the fit is a bit snug, but the inner case still closes and everything still lines up correctly so everything is good on that end. What I didn't expect is the belt carrier is actually decent; the phone can attach in every orientation (face up/down, rotated 180 degrees about the face). It adds a bit of bulk, but I will gladly take it over a simple shell or soft case.
masterjay21 said:
Before you read lol this is overkill but Decided to go with tempered glass from Pleson. I've used them before on my Moto X '15 no problems!
Going to see how the tempered glass and clear case work out!
Click to expand...
Click to collapse
How did these work out for you??
blynkofaneye said:
How did these work out for you??
Click to expand...
Click to collapse
Dudee they just came today and the Pleson Case fits perfectly like a glove! You cannot use the case with the included removeable wood plate. The Pleson tempered glass is a perfect fit! Now I'm looking for a bumper that allows Moto Mods.
Driosenth said:
Purchased an Otterbox Defender case. I needed tough case and didn't have any experience with heavy duty cases other than Supcase's Unicorn Beetle, Otterbox's Defender, and Trident Case's Kraken. Supcase has one for preorder and I doubt the Trident will release a Kraken case for the Moto Z Droid.
The Defender is what I expected; A durable inside case surrounded by a softer shell. Had the same terrible plastic screen protector as every other Otterbox case. Popped it off the case, removed the adhesive with the edge of a blade.; With a tempered glass screen on the phone itself the fit is a bit snug, but the inner case still closes and everything still lines up correctly so everything is good on that end. What I didn't expect is the belt carrier is actually decent; the phone can attach in every orientation (face up/down, rotated 180 degrees about the face). It adds a bit of bulk, but I will gladly take it over a simple shell or soft case.
Click to expand...
Click to collapse
That sounds amazing I'll try that Otterbox Case as well. I expect added bulk but is it overbearingly weighty?
masterjay21 said:
Dudee they just came today and the Pleson Case fits perfectly like a glove! You cannot use the case with the included removeable wood plate. The Pleson tempered glass is a perfect fit! Now I'm looking for a bumper that allows Moto Mods.
Click to expand...
Click to collapse
Awesome. Is the bumper pretty low-profile? Damn, I thought it might make the Style Shell not usable, bummer. Let us know if you find a case that will accommodate the shell/mods! Can you post pics of the bumper/screen protector? Would love to see real-world pics.
blynkofaneye said:
Awesome. Is the bumper pretty low-profile? Damn, I thought it might make the Style Shell not usable, bummer. Let us know if you find a case that will accommodate the shell/mods! Can you post pics of the bumper/screen protector? Would love to see real-world pics.
Click to expand...
Click to collapse
The case i purchased in the above photos is a clear case bro! Feels pretty nice in hand too. And when i find a moto mod bumper case I'm definitely post pics ASAP. Even a video
masterjay21 said:
The case i purchased in the above photos is a clear case bro! Feels pretty nice in hand too. And when i find a moto mod bumper case I'm definitely post pics ASAP. Even a video
Click to expand...
Click to collapse
Only one I've found so far that works with mods is one of the official ones from VZW. Appears to be pretty similar to the rest of the bumper cases out there, but twice the price:
http://www.verizonwireless.com/accessories/two-tone-bumper-for-moto-z-force-droid-edition
masterjay21 said:
Before you read lol this is overkill but Decided to go with tempered glass from Pleson. I've used them before on my Moto X '15 no problems!
Going to see how the tempered glass and clear case work out!
Click to expand...
Click to collapse
Was about to order this exact set up. Questions:
1) The case is all clear right? The pics make it look like the sides are rose gold.
2) Any issues installing the screen protector? I've never had a glass and the reviews say that its prone to bubbles.
HotShotAzn said:
Was about to order this exact set up. Questions:
1) The case is all clear right? The pics make it look like the sides are rose gold.
2) Any issues installing the screen protector? I've never had a glass and the reviews say that its prone to bubbles.
Click to expand...
Click to collapse
No problems it had bubbles but i forced them out.
And glass is the best new craze bro! It's worth it trust me! This screen can crack ice seen it better the tempered glass than a scratched screen.
The Case is all clear like water.
https://dbrand.com/shop/moto-z-force getting this and tempered glass.
Sent from my Nexus 6 using Tapatalk
Driosenth said:
Purchased an Otterbox Defender case. I needed tough case and didn't have any experience with heavy duty cases other than Supcase's Unicorn Beetle, Otterbox's Defender, and Trident Case's Kraken. Supcase has one for preorder and I doubt the Trident will release a Kraken case for the Moto Z Droid.
The Defender is what I expected; A durable inside case surrounded by a softer shell. Had the same terrible plastic screen protector as every other Otterbox case. Popped it off the case, removed the adhesive with the edge of a blade.; With a tempered glass screen on the phone itself the fit is a bit snug, but the inner case still closes and everything still lines up correctly so everything is good on that end. What I didn't expect is the belt carrier is actually decent; the phone can attach in every orientation (face up/down, rotated 180 degrees about the face). It adds a bit of bulk, but I will gladly take it over a simple shell or soft case.
Click to expand...
Click to collapse
Mine arrives Tomorrow
Sent from my XT1650 using Tapatalk
I got this pair:
Screen Protector: https://www.amazon.com/gp/product/B01K1D37OG
Case: https://www.amazon.com/gp/product/B01JH36W98
Both fit and feel like they came from the factory. Very satisfied with both so far. I'll likely also get VZW's bumper "case" for when I'm carrying it around with mods.
[Edit]
After more reading on Verizon's bumper I think I'll hold off until someone else makes a decent mod compatible case.
Just pre ordered this https://www.amazon.com/gp/aw/d/B01HP44TUK/ref=ya_st_dp_summary
Sent from my XT1650 using Tapatalk
I use the cimo tpu case. It's cheap, durable, and stylish.
Apparently I can't post links from the labs app, but it's easy to find on Amazon.
I posted a more complete review in it's own thread, but for belt clip holster types...
Good: https://www.amazon.com/gp/product/B01H2K0M58/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 (Great fit with the Incipio Battery Pack on the phone)
Bad: https://www.amazon.com/gp/product/B01HCN4PB2/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 Too long... AGOZ one listed above it perfect length for a naked phone at almost exactly 6 inches of internal length (~15.5 cm). The MND, on the other hand, is about 6.75 inches in length (16.75 cm)... the naked phone swims in that much length.
Moto Z Force Droid Case Hard Back Bumper Hybrid Slim Cover
Found this case on ebay:
http://www.ebay.com/itm/like/351813033892?lpid=82&chn=ps&ul_noapp=true
Stumbled upon this and thought it may be good to share with the members here.
https://www.amazon.com/Protector-Nillkin-Anti-Explosion-Hardness-Tempered/dp/B01J1D7RTI
Bought one and tried - verdict: it's less prone to fingerprints. Now I'll be looking for a bumper case next
Does it lift on the sides? I have their front screen protector and it lifts on the edges.
Bought one from http://m.aliexpress.com/item/32701520282.html
And it was probably even easier to set up than the front. Unfortunately it does lift on the edges as well. I have yet to find one that doesn't have that effect. Then again the 2.5d glass makes it difficult like that.
An alternative
Hello people of honor
I found a very cheap alternative back protector on ali today.
https://www.aliexpress.com/item/2-P...-8-Clear-Ultra-Thin-Slim-Fit/32756887262.html
It says the material is carbon fibre. According to pictures, it's partialy transparent. Also it should help with grip (hearing the phone is very slipery, still awaiting mine). The question is, how will it look on the phone. Could be somewhere betweeen good and an absolute abomination.
I ordered one today, I'll post here when I get mine (and my phone) if I remember & won't feel lazy.
Ohhhh that actually looks nice! Looking forward to seeing how it looks.
Is there a completely clear thin back film? I just want one to protect from scratches while still using a case
Notchr302 said:
Is there a completely clear thin back film? I just want one to protect from scratches while still using a case
Click to expand...
Click to collapse
The link from OP does come with front and back layer.
faizalotai said:
The link from OP does come with front and back layer.
Click to expand...
Click to collapse
Tempered glass is NOT what I'm looking for. That's intended to use without a case. I need the old standard thin protector to leave no bulk while still using a case
Notchr302 said:
Tempered glass is NOT what I'm looking for. That's intended to use without a case. I need the old standard thin protector to leave no bulk while still using a case
Click to expand...
Click to collapse
My bad..lol
mine using this one
https://www.amazon.com/gp/product/B01J1D7KU4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
the back layer thinner than front 0.3mm layer
I bought nillkin 0.2mm tempered glass protector for the front and it also came with a plastic protector for the back. I bought the carbon fiber back protector and it is garbage. The hole cutouts are off and it doesn't stick to the back that well. I'm just using the one included with nillkin.