I flashed the stock rom with odin on my samsung galaxy core gt i8262, and now it's stuck on the flashing samsung logo. Recovery mode DOESN'T work. I tried to flash a different recovery (cwm, or even the stock one) and after that it displays a yellow triangle below the samsung logo (the one that shows up first, not the flashing one) and recovery mode still doesn't work. I tried to repartition it with an official pit file and its the same as when i only flash the stock rom. What should I do?
Hi,
I'm sorry, but for your device I can't find any thread with your needs but you can try to flash stock firmware (google) and do a reset from stock recovery.
So, you have a choice to start asking in the general forum for Q&A from here:
XDA Developers> General discussion > Questions and Answers
or try something in the old Galaxy Core from here, maybe some users can direct you in the right place:
> Legacy & Low Activity Devices > Samsung Galaxy Core > Galaxy Core Q&A, Help & Troubleshooting
Good luck
Related
i hope someone can help me with this...
Last night my note 2 restarted by itself and got stuck on the Samsung logo. ive flashed a new firmware with Odin and it succeed.
now when i want to go to recovery mode it shows the teamwin.img and thats it... it wont go to the recovery mode. ive flashed a new recovery package/rom and it shows succeed as well but still cant go to recovery mode. only teamwin logo.
i really appriciate all help...
Hi,
If you flashed stock firmware again with Odin, twrp should be gone, and Stock recovery should have been restored. So I suggest you didn't flash the full firmware, or it was modified firmware.
Also, you could try flashing CWM Recovery instead for your device, or a different twrp version even.
Any help on anything further, please ask in this dedicated help thread for your device,
> Samsung Galaxy Note II GT-N7100, N7105 > Galaxy Note II Q&A, Help & Troubleshooting > [NOOB FRIENDLY] Ask the question! [N7100 and other variants]
Good luck!
Hello guys, i really need help.
I've got Galaxy S Duos 2 (GT-S7582), Pre-Rooted firmware, I've installed custom kernel and the phone can't turn on anymore (can't boot). It can get into the DOWNLOAD MODE and custom recovery mode (CWM). Using Odin I can flash firmwares but the phone freezes at the SAMSUNG GALAXY S DUOS start screen. In the upper left corner there is a RED EXCLAMATION MARK and the phone is not turning on (not booting).
Pls tell me what to to, i'm desperate
Hi,
Here is a dedicated thread for your device .... I am thinking you meant gt-s7582??
If so, read the first page of this thread very carefully... And try flashing stock firmware again,
http://forum.xda-developers.com/showthread.php?t=2776425
If you have more questions, you could try asking there, or here....
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Yes it's GT-S7582, my bad.
I'tried to flash with Pre-rooted ROM, and it' didn't work, i also tried to flash with some kind of custom rom (S5 themed) and it' didn't work.
At the end, i downloaded official firmware (S7582DDUAND1_S7582ODDANC1) and flash with it, and the red exclamation mark is gone, my phone is booting, and working like a new.
Thanks for help
Awesome! Thread closed. ?
Tried flashing a rom made for my phone from twrp manager and the flash failed. The phone is stuck in a boot loop with twrp manager open but the installations fail. Downloaded stock firmware, uninstalled kies, tried different cables and odin cannot finish flashing back to original hardware. It is connected but always fails after it cant connect to serial port, starting connection, or complete write operation failed. Should I try to find different drivers or any fixes? Ive tried Odin 3.04 and 3.07. Also, would anyone have any idea where i could find the correct drivers?
Hi there
You'd be best served asking for help from the experts who own your device, here
> Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting > [HELP THREAD] Galaxy S3 Ask any question.
Good luck
Is there any modified recovery I can flash form ODIN/Heimdall and that will boot into itself by default? Device is I9300.
Short version of problem: Stuck in bootloop, no way to enter recovery. Flashing stock ROM = still bootloop.
Long: After downgrading BlissPop 5.1.1 to an earlier version I got into a bootloop (due to not wiping everything that I should have properly).
Was rooted and had CWM recovery.
Flashed stock ROM 4.3 (NEE-I9300XXEMG4-20130809155048). But now I have bootloop with this ROM instead. Flashed again, same thing. Flashed an earlier version. Also flashed the original 4.0.4. Waited 10 minutes more with every bootloop, pulled battery.
Can't enter recovery to wipe due to power switch beeing physically scraped off from the logic board. Cell phone repair guy could not solder on a new power switch, nor was he able to put electrical current into it by a cable. So repairing is out of the question.
Found some info about how to enter download mode and from there get into recovery by pressing button combination, this does not work for me.
I can get into download mode by using USB JIg. I can also start the device by inserting it and removing after 1-2 seconds.
Is there an alternative way to perform a wipe? How do I get out of this mess?
Doesn't ODIN performed a wipe when flashing stock ROM?
How do I take Blisspop and make it flashable from ODIN?
Hi there,
You must ask in the dedicated forum for this device, but first you must see what exactly model of S3:
Here is general forum for Q&A dedicated to Galaxy S3 I9300/9305:
> Samsung Galaxy S III I9300, I9305 > Galaxy S III Q&A, Help & Troubleshooting
Or ask directly in this thread: [HELP THREAD] Galaxy S3 Ask any question.
Good luck
I'm trying to root my galaxy a8 (sm-a800f), but everytime i flash the CF-auto-root file i would just be greeted with this same message. I'm sure its the correct file, because its the only one out there. Everytime this happens, I just flash the official stock ROM again and everything is fine, I don't even lose my data.
CF-Auto-Root-a8elte-a8eltejv-sma800f.tar is the file im using, and A800FXXU1BPH4_A800FOLB1BPH4_A800FXXU1BPG3_HOME.tar is the stock rom.
I have OEM unlock enabled.
Hi there and welcome to assist,
Some users reported that CF-Auto-root don't work with that firmware. Try other methods like:
How to Root Any Device
You'll have to create an account to post in the main forums if you have any other questions.
> Samsung Galaxy A Series > Galaxy A3, A5, A7, A8 Q&A, Help & Troubleshooting
Good luck