I have been trying to get this thing upgraded to 5.0 for a day and half now, and i just flashed it for like the 10th time with lg flash tool to try to take it to stock. The last rom i flashed ended up bricking the device. I found it in this thead: http://forum.xda-developers.com/show....php?t=2698267
All of a sudden it won't turn on, won't respond to adb or enter recovery with the volume down + power combo. tried to get it in download mode as well, no go.
All i can see in device manager is qhsusb with an exclamation point. I struggled to update this and once i finally did, the device still isn't recognized by the computer in any lg programs like mobile support tool or flash tool or by adb and wont turn on what can/should i do at this point?? I
Hi, thank you for using XDA Assist. You description does sound like a brick. I'm afraid you'll have to send it to the manufacturer to get it fixed.
Thread closed.
Related
Hi there,
i tried to flash my O3D with CWM but it seems that my batt. crashed due flashing. The strange thing is... I cant event get into S/W Update mode / Download Mode or any other Mode. If I try to get my Device as OMAP44XX device I dont get anything my phone stays off and the computer isnt recognizing (before it does).
I tried;
Smart Flash (No Phone found)
Emergency Restore (Critical Error)
LG FLash Tool (Nothing happend)
I followed all manuals step a step so I dont get any mistake but here I stay.
When I start my phone normale I become the LG Logo for around 2 seconds and then screen turns black with backlight on. If i touch the screen button backgroundlighting turns on. Im out of Ideas how to fix.
Please guys help me
Friendly Regards
Kevin
Do you have sound in windows7 if you connect (vol up+power no battery????
Sent from my LG-SU760 using xda app-developers app
Dont worry you are only halfbricked.
Read a few guides and you will make it work again.
I dont get any device recognition when I connect w/ Vol+. Not even as this texas instrument device. I already tried nearly all pinned guides but I dont get any recognition to my pc. It doesnt get shown as any device in DeviceManager and I didnt get anything with starting with VOL+ + turning in cable. Windows dont get it
Sorry Iam noot can not help you
Sorry happier ask some dev:banghead:
Sent from my LG-SU760 using xda app-developers app
Okay after a couple of PC restarts I got a new Android ICS Flash on it but after a few minutes phone shut down every time -.-
Strike
I was in the same situation. I was using WIN7. I installed WINXP SP3 ( made my PC dual boot)
I followed the links below and I was going again.
http://forum.xda-developers.com/showthread.php?t=1734330 and http://forum.xda-developers.com/showthread.php?t=1942836
all the best.
schubeir
Yepp, but I just killed all driver completly made 3 restarts then, after I installed all driver from the tutorials new killed some other device driver from optional hardware and killed the Texas Instrument driver. After that I tried again and I directly tranfered the ICS ROM but have now the problem that I cant get it Rooted and dont can change baseband I tried to flash but its still the old one... So my SIM-Card isnt accepted by my phone in ICS and I try to download the official bin again (sigh) and update to ICS if the baseband problem will be fixed. Thanks for helping me and spending me new courage
After I tried to reinstall the original kdz firtsty I got LG Logo - turn off - lg logo - turn off... loop then I tried to install it agai... now phone stays off. Didnt get any reaction out of it... any clues ?
I've looked at the similar threads , to be honest even if one of the suggestions might work , none of the people seem to have the same problem from my understanding.
So apologize ahead of time as i imagine someone has bricked in a similar fashion in some thread buried somewhere.
But have an unlocked P925g lg optimus 3d, got a few days ago.
Last night i rooted just fine , root checker says it was rooted properly.
Then i installed rom manager as i was following manbearpigs post.
When i got to flash clockwork mod , i clicked the button and it looked like it was doing some flashing , but the phone turned off to reboot??
and now when i power on the lg logo appears and then the screen goes funny.
If i try to hold the power down and 3d button , i get a green screen . However i'm very unsure of what to do next.
However when i plug into usb the phone goes black , refuses to turn back on until i take the battery out.
I'd pay someone here if i could , but i'll take any help i can get.
Appreciate any help.
I don't KNOW, but just an idea:
May be your phone is stuck in download mode?
With this latest ICS (original, not ported) my phone shows black screen when in download mode (no message SW UPDATE and something in Korean).
Did you try to plug your phone to PC? Does your comp see it?
From what I read flashing wrong CWM might cause problems...
Also try to read Ressurection thread by xbsa, it helped me couple times
Don't give up!
Sent from my LG-P920 using xda app-developers app
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
just try the LG flash tool to flash without reinstalling drivers, if it doesn't flash you have to uninstall all LG drivers, reboot your computer, install again LG drivers and flash Bin files using Flash tool, you don't have to flash Bin and fls files at the same time, first Bin file, if there is no network close LG flash, open it again and flash Fls at second time to get the right baseband (sometimes it not necessery to flash this fls files)
or just follow this guide
http://www.technopat.net/forum/android-telefonlari/9128-lg-optimus-3d-ultimate-flash-guide.html
odanhammer said:
My computer does see the phone if i take the battery out , and push the volume down while it connects. However when it connects , it cannot find drivers that it find originally.
I'd be happy just to have the phone back to froyo right now , however i am not giving up , just asking for advice. Will reply once i look at the resurrection post you suggested.
Click to expand...
Click to collapse
To get to download mode you need to keep battery in, remove sim and SD card. Hold vol+ and plug USB cable. You should see message SW UPDATE and some Korean. My phone now doesn't show it, just blank screen. But LG Flash sees it and u can flash bin fls.
Sent from my LG-P920 using xda app-developers app
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Android1993 said:
Remove drivers and use the LGMobile Support Tool to install the drivers, if your phone is connected it should detect it and finish the install process. I believe the P925G is a Rogers device? You might have to select Rogers as your carrier to find the drivers.
Click to expand...
Click to collapse
ok so i've deleted all lg related material from my computer, when i connected the phone to the computer with battery in , nothing happens.
Without battery , it detects automatically , then it continues a loop of picking it up and dropping off .
So i moved to my laptop , attempted to follow the guide kupuku posted, however after getting the went logo on the phone , it never gets past that stage no matter what i do.
I've also tried LG support tool , it doesn't detect my phone on either my computer or laptop , even after installing/reinstalling the proper drivers.
LG does have a live chat which isn't open and the phone number can not be reached from my area.. i imagine its a 1800 number for asia or something as i do live in Canada.
My only other choice is to take the phone down to a guy that can get it out of boot loop for close to what i paided for the phone a few days ago.
Least to say , that option is something i want to do , nor can i afford to do.
once again i apprecaite the help that has been given , and for any that will be given.
edit:
Ok so i got lg mobile support to work by doing recovery and entering my imei number. Its currently at 4% but its been close to an hour and a half. Might restart and see if that works , but my phone is doing the logo boot repeat pattern still , even during this update. so not sure what exactly is happening.
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
babaghanush said:
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
Click to expand...
Click to collapse
Find flow ROM with expansion .exe and try it to sew from a computer.
could you further elaborate please
lykosha said:
Find flow ROM with expansion .exe and try it to sew from a computer.
Click to expand...
Click to collapse
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
babaghanush said:
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
Click to expand...
Click to collapse
Try to find driver on the web-site of producer. Set them. Overload a vehicle in Bootloader. In the controller of devices on компе must be determined your device. Then on a computer start sewing - .EXE.
Did you get this problem resolved? I have the exact problem with the exact phone!!!
thank you very much
Hello everyone i need help!
I have LG G3 Sprint(LS990), its a long story how i get into this problem so ill be short.
I flashed my phone few times and got bricked my phone. now i stuck on LG logo loop it continuously shows me LG logo. Recovery and Download modes not working anymore so i cant flash a ROM right now. after few days of researching i find the way how to make download mode work with laf.img i got everything i need LG driver installed , adb installed on my computer and i got that laf.img for lg g3 ls990 the only problem right now i have is that i can't connect my LG to PC, windows doesn't see any changes in device manager when i connect cable.
So here is the question: how can i make my Phone connect to PC while im stuck in fastboot. (i already tried few different Windows PC and Linux also used 5 different cables starting from original one end with other phone cables but still can't make my LG get connected to PC so i can flash a laf.img file to make my download mode work. If you have any other solution ill be happy to accept and try it. Hope for quick response, as its the only phone i got at the moment and its been a few days already that i don't have phone, so my friends start think that im dead or lost already :crying:
P.S sorry for poor English
Hello and welcome to XDA Assist.
Go HERE and post a thread there and I'm sure the Sprint G3 experts will help you there
Good Luck!
i rooted my phone and i wanted to switch rom for it,i flashed h850 rom rebooted device and it wont boot...i figured im on qualcomm 9008 mode in my computer so what can i do?
please please help me!!
thanks in advance..
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Dark Nightmare said:
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Click to expand...
Click to collapse
You probably didnt understand me well.. I cant put it in any mode...it wont turn on on any condition..
You said you rebooted twice, that tells me the device powers on, therefore, by doing a battery pull, holding the recovery or download mode button combos and powering up should get you into the desired mode. IF its not powering on at all:
1. Try charging the battery externally and try again.
2. See if the device is being recognized by a pc, if so there is hope that resting the device and trying again may work or we can see what mode it is in via adb/fastboot to get the device into a recoverable mode.
So....
Dark Nightmare said:
You said you rebooted twice, that tells me the device powers on, therefore, by doing a battery pull, holding the recovery or download mode button combos and powering up should get you into the desired mode. IF its not powering on at all:
1. Try charging the battery externally and try again.
2. See if the device is being recognized by a pc, if so there is hope that resting the device and trying again may work or we can see what mode it is in via adb/fastboot to get the device into a recoverable mode.
So....
Click to expand...
Click to collapse
The computer recognizes my device as qualcomm 9008
I have the same problem. My phone is dead only shows Qualcomm 9008.
Silly... If it's not for your phone why would you flash it??? Might have to wait for the official kdz from lg assuming you can some how get it into download mode. Or simply use your insurance for a new device. Expensive lesson learned
Maybe you can try the lg mobile support tool, since a tot file is available LG may have the stock kdz file available now, so try the recovery option for the mobile support tool.
Pretty sure that Qualcomm message thing is the true hard brick...
Sent from my pretty nifty brand new LG V10
This might sound stupid and it is usually for devices which have problems turning on or similar. I think is better to try anything that not trying all the options.
Why dont you try removing the battery, then close the module part without the battery. Press and hold the power button for at least 30 seconds. then release it. then put the batttery back on and try to make it boot into download mode. Chances are slim but the chance still there. This worked with my Samsung galaxy s5 after i flashed a rom that claimed to be for all models including the tmobile version when it clearly was for the g900f version . and i decided to try what i have done with other types of electronics and it worked.
Just tried on my phone. No go. Still dead. Trying lg repair. Hope I can get it fixed and not cost a arm and a leg.
Here is a guide to recover from 9008 mode
Here is a tool to extract kdz from tot
I've not read through these all the way, but if the PC sees it at all, it's not truly bricked... It might just be a pain in the ... to get it fixed. Those 2 links are good starting points for you. I hope you get this resolved.
I have the same error... My LG g5 H860 no turn on only connect in the PC on mode Qualcomm HS-USB QDLoader 9800.
Any idea or solution to resolve this?
Thx
BR
Dark Nightmare said:
Put it into download mode and restore the device via LGUP+TOT file, or if you made a backup, just reboot into recovery and restore your backup...
Click to expand...
Click to collapse
same issue just that my lgg5 tm is stuck on the firmware update for trying to root via lgup/tot file now not even lg bridge reads the phone it wants to then it says can not odetect nothin has worked