Lollipop no lag tip - Galaxy S 4 Themes and Apps

Spand this tip
No lag in lollipop
Just Solved
Change this line in build.prop
Dalvik.vm.heapsize =560m
Increase speed and no lag lollipop
battery equilibry ?

Did you forget a "m"? 560m instead of 560?

560m sorry

Any feedback please??
I just copied it from the site:
dalvik.vm.heapstartsize size when first launch
dalvik.vm.heapgrowthlimit limit of standard app
dalvik.vm.heapsize heap for large app
increasing heapsize can improve performance because app can used more memory to unpacking resources.
reducing heapsize may improve multitasking experience. however, in some cases, large applications such as gaming, the performance can be more severe. while app nowadays is using larger resources (hd images,audio etc), which would force it to run garbage collection frequently, which would use up CPU cycles and reducing battery life as well.
Click to expand...
Click to collapse

I don`t see any difference on S4 LTE-A to be honest.
Will report back after days of use.

Don't worry~
javitolopez69 said:
560m sorry
Click to expand...
Click to collapse
It's fine thanks for the tip!

TFutoMaki said:
It's fine thanks for the tip!
Click to expand...
Click to collapse
Did anyone experience something???
no lag??

HITMAN-CREED said:
Did anyone experience something???
no lag??
Click to expand...
Click to collapse
I can't say much because my Gt-i9505 didn't lag before changing the heapsize, sorry about that :/

There is a definite improvement, great work.

Two days for battery stable?

Oh! Thanks A Lot. I Can Feel Difference In An Instance.
Thanks For This Piece Of Knowledge.
To Know More About Dalvik.vm.heapsize , You Can Check This Link Out:
CLICK HERE

javitolopez69 said:
Spand this tip
No lag in lollipop
Just Solved
Change this line in build.prop
Dalvik.vm.heapsize =560m
Increase speed and no lag lollipop
battery equilibry
Click to expand...
Click to collapse
hi
how doy you reached that "optimal" value?
thanks in advance

dalvik.vm.heapsize=840m
Lol?

add to the end of /system/build.prop [test]
Code:
#
# IZX_ADDITIONAL_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=640m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
#END

Is great this settings ?stable??

javitolopez69 said:
Is great this settings ?stable??
Click to expand...
Click to collapse
yes, pretty stable and smooth i think. i have edited these values for a snappier responsiveness.
you can try it by yourself, and for undoing the changes, simply delete this lines from build.prop.
regards

Anyone else tried?

Related

ro.ril.hsxpa=3

what does this do
ro.ril.hsxpa=3
qbills314 said:
what does this do
ro.ril.hsxpa=3
Click to expand...
Click to collapse
this will enable hsupa. Fast upload speeds.
klquicksall said:
this will enable hsupa. Fast upload speeds.
Click to expand...
Click to collapse
HSUPA is already enabled with ro.ril.hsxpa=2
http://forum.cyanogenmod.com/topic/9781-buildprop-roril-meanings/
That I, true I think, setting it to 2 does as well. But inspire's problem is its set to 1 stock which caps upload speed.
mike1986. said:
HSUPA is already enabled with ro.ril.hsxpa=2
Click to expand...
Click to collapse
Is this default enabled in your ARHD Roms? Or need i the [Mod] to enable it?
RogerPodacter said:
That I, true I think, setting it to 2 does as well. But inspire's problem is its set to 1 stock which caps upload speed.
Click to expand...
Click to collapse
The stock ROM has had this value set to 2 since the OTA update in April.
henrybravo said:
The stock ROM has had this value set to 2 since the OTA update in April.
Click to expand...
Click to collapse
3 on all of mine... Including the new Gingerbread leak that came out recently.
id10terrordfw said:
3 on all of mine... Including the new Gingerbread leak that came out recently.
Click to expand...
Click to collapse
You know there are duplicate fields in the stock build.prop. One entry is "2", the other one says "3". The way I understand it the one that says 2 overrides the one that says 3 due to placement in the file....it's a goofy quirk of the stock build.prop. I don't think anyone knows why there are these duplicate fields with different values.
meiguoguizi said:
You know there are duplicate fields in the stock build.prop. One entry is "2", the other one says "3". The way I understand it the one that says 2 overrides the one that says 3 due to placement in the file....it's a goofy quirk of the stock build.prop. I don't think anyone knows why there are these duplicate fields with different values.
Click to expand...
Click to collapse
This drives me nuts and I want to delete the second values sooo bad Lol
Can anyone confirm that 2 works better than 3?
Sent from my Microwave
seh6183 said:
This drives me nuts and I want to delete the second values sooo bad Lol
Can anyone confirm that 2 works better than 3?
Click to expand...
Click to collapse
2 and 3 work the same. The stock ROM is set to 2, even though there is a duplicate entry further down the build.prop set to 3. As meiguoguizi said, when there are duplicate values, the top value wins. I have confirmed this by playing around with the duplicate hsxpa entries and checking the "P" or "U" in the radio version.
meiguoguizi said:
You know there are duplicate fields in the stock build.prop. One entry is "2", the other one says "3". The way I understand it the one that says 2 overrides the one that says 3 due to placement in the file....it's a goofy quirk of the stock build.prop. I don't think anyone knows why there are these duplicate fields with different values.
Click to expand...
Click to collapse
LOL I think I know all about build.prop. I have triple checked the stock update that am running, 3 is the only setting. But hb is right, I can't see any difference between two or three.
Sent from my Desire HD using XDA Premium App
id10terrordfw said:
LOL I think I know all about build.prop. I have triple checked the stock update that am running, 3 is the only setting. But hb is right, I can't see any difference between two or three.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Interesting. There must be different versions of "stock" floating around. The attn1 updated rooted stock ROM and the supposed new GB leaked ROM had these settings at the top:
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.gprsclass=10
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.ril.hsxpa=2
ro.ril.def.agps.mode=1
ro.ril.att.feature=1
ro.ril.radio.svn=3
ro.ril.disable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.sdr=0
ro.ril.enable.gea3=1
ro.ril.enable.ucsq=2

Tweaks for build.prop?

I'm trying to get tweaks for the build.prop? I can't find any thread for the NS. I mostly want a tweak for touchscreen responsiveness and some battery tweaks if possible.
xda<3 said:
I'm trying to get tweaks for the build.prop? I can't find any thread for the NS. I mostly want a tweak for touchscreen responsiveness and some battery tweaks if possible.
Click to expand...
Click to collapse
youre not going to find any. you can change your screen resolution, or maybe some data speed tweaks..
Yeah or rom toolbox offers some as well
Sent from my Nexus S using XDA App
simms22 said:
youre not going to find any. you can change your screen resolution, or maybe some data speed tweaks..
Click to expand...
Click to collapse
umm well i found some for the motorola atrix that worked like a charm for my nexus s.. My screen is much more responsive
xda<3 said:
umm well i found some for the motorola atrix that worked like a charm for my nexus s.. My screen is much more responsive
Click to expand...
Click to collapse
nice!
by why was your screen not that responsive in the first place?
if you use the ondemand governor, and set the sampling rate to 15000 and up threshold to 98, ui gets a speed boost.
simms22 said:
nice!
by why was your screen not that responsive in the first place?
if you use the ondemand governor, and set the sampling rate to 15000 and up threshold to 98, ui gets a speed boost.
Click to expand...
Click to collapse
Sometimes I would have to tap twice on an icon to get it open.. Could be that I was taping too quick before the page could load? idk. But it seems better now. It wasn't thaaaat bad though.
data speed tweaks have got me nothing . maybe worse sometimes

[ROOTMOD] Kernel Adjustments v1 [STICKYME]

I've taken the liberty to root my GS4 and have some time spent on tweaking kernel parameters.
For these settings you need to be rooted and have downloaded a kernel tweaking app, such as Trickster Mod.
I believe these settings should make some pretty significant changes to your experience.
Follow the screenshots for the configurations:
Any heat issues?
akira02rex said:
I've taken the liberty to root my GS4 and have some time spent on tweaking kernel parameters.
For these settings you need to be rooted and have downloaded a kernel tweaking app, such as Trickster Mod.
I believe these settings should make some pretty significant changes to your experience.
Follow the screenshots for the configurations:
Click to expand...
Click to collapse
Since the changes have you noticed any significant heat or rapid battery drain?
john.082896 said:
Since the changes have you noticed any significant heat or rapid battery drain?
Click to expand...
Click to collapse
Still testing. I am charging the device now and I'll report later but i'm guessing hardly anything noticeable.
Thanks for the post!
I am however curious about the use of ZRAM as this phone should easily have enough built in RAM to where that is not needed..
ZRAM generally gets used when a system is RAM deficient.. ZRAM will also be noticeably slower than using the built in RAM as well...
Looking forward to you reporting back..
raqball said:
Thanks for the post!
I am however curious about the use of ZRAM as this phone should easily have enough built in RAM to where that is not needed..
ZRAM generally gets used when a system is RAM deficient.. ZRAM will also be noticeably slower than using the built in RAM as well...
Looking forward to you reporting back..
Click to expand...
Click to collapse
I think you may be confused about ZRAM.
ZRAM is used for swapspace instead of placing the swap on the "disk" it is placed in RAM for a performance boost.
akira02rex said:
I think you may be confused about ZRAM.
ZRAM is used for swapspace instead of placing the swap on the "disk" it is placed in RAM for a performance boost.
Click to expand...
Click to collapse
I don't think I am confused... Why use swap space for RAM when this phone already has plenty?
Then again, I may be confused..
http://en.wikipedia.org/wiki/ZRam
Going to give this a shot for a little while.
Baldilocks said:
How do you get to the Interactive Control screen?
Click to expand...
Click to collapse
I believe you have to set the CPU governor to interactive, apply by pressing the check at the top right, then going into governor control at the bottom.
tysj said:
I believe you have to set the CPU governor to interactive, apply by pressing the check at the top right, then going into governor control at the bottom.
Click to expand...
Click to collapse
Yeah, I found that right after I posted. Thanks!
---------- Post added at 01:49 AM ---------- Previous post was at 01:24 AM ----------
This mod has reduced stutter and sputter by like 90% on my device. Will keep pushing it.
Thanks. Really seems to help alot on mine. I did leave the min cpu at default speed though.:thumbup:
Only downside is that after reboot you have to change the settings again.
Sent from my Galaxy S4 using Tapatalk 2.
You can set at boot in the settings from the menu.
Baldilocks said:
Only downside is that after reboot you have to change the settings again.
Sent from my Galaxy S4 using Tapatalk 2.
Click to expand...
Click to collapse
bri315317 said:
You can set at boot in the settings from the menu.
Click to expand...
Click to collapse
Indeed. Just hit the menu capacitive button to get to the menu pictured below:
Your menu looks so different in terms of the interactive controls... I have none of those values or menus but an even longer list.
Why does your say you have power savings enabled? Why not turn power savings completely off? I still run my galaxy for like 2 days with Music playing like an 8 hour day.
Been running this since last night..
I am not really noticing any difference but will keep testing..
Disclaimer:
I already had 101 apps / processes frozen, animations set to zero, force GPU enabled and am using a different launcher. I think most, if not all, of my lag was done away with by doing that..
raqball said:
Been running this since last night..
I am not really noticing any difference but will keep testing..
Disclaimer:
I already had 101 apps / processes frozen, animations set to zero, force GPU enabled and am using a different launcher. I think most, if not all, of my lag was done away with by doing that..
Click to expand...
Click to collapse
Yea my phone was fast to begin with but with this my battery life has been amazing
Sent from my SAMSUNG-SGH-I337 using xda premium
Hers mine. Geared more towards battery. Never had lag issues even from day one prior to rooting.
ATT S4 Rooted. Beastin.
4.2.2
slider2828 said:
Your menu looks so different in terms of the interactive controls... I have none of those values or menus but an even longer list.
Why does your say you have power savings enabled? Why not turn power savings completely off? I still run my galaxy for like 2 days with Music playing like an 8 hour day.
Click to expand...
Click to collapse
On the general settings, after you've selected interactive you have to hit the check mark on upper right. Then click governor control at the bottom, you should see the interactive settings.
Cant wait to find out what settings gives best battery life and performance.
Yeah. Gotta keep hitting that check mark or nothing takes.
Sent from my Galaxy S4 using Tapatalk 2
Seems to not go into deep sleep on interactive. Is this happening to uou?

Major Galaxy S5 camera improvement

Yesterday, I noticed an improvement under low light conditions, by switching over to mdp composition type, instead of c2d, without needing picture stabilization.
Here's a preview of my build.prop setup with MDP (mobile display processor) active.
Code:
debug.sf.hw=1
debug.sf.swaprect=1
ro.sf.compbypass.enable=0
debug.egl.hw=1
debug.egl.buffcount=4
debug.gr.swapinterval=0
debug.composition.type=mdp
persist.hwc.mdpcomp.enable=true
persist.sys.composition.type=mdp
debug.mdpcomp.maxlayer=0
debug.disable.bwc=1
debug.mdpcomp.logs=0
debug.mdpcomp.maxpermixer=-1
debug.mdpcomp.mixedmode.disable=1
debug.mdpcomp.idletime=0
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
com.qc.hardware=1
debug.qc.hardware=1
dalvik.vm.heapsize=36m
debug.hwc.dynThreshold=1.5
dev.pm.dyn_samplingrate=1
dev.pm.dyn_sample_period=500000
persist.demo.hdmirotationlock=false
The attachments below show the improvement.
Impressive Quadrant Score
I've also gotten 25000+ consistently with this modification. I'm a photographer, so I'm very happy with the Galaxy S5's performance now. I do a lot of multimedia multitasking on the go and at times the phone lagged pretty bad. The battery has improved as well. Here are a few more build.prop modifications I'm using that may contribute to the camera and system performance.
Code:
ro.hwui.panel_bit_depth=32
hwui.use_gpu_pixel_buffers=true
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,m=y,o=v
Here's my Quadrant score screenshot. ☺
I'm not quoting your long op, but those images look exactly the same!
ldeveraux said:
I'm not quoting your long op, but those images look exactly the same!
Click to expand...
Click to collapse
wat
you should look on a computer screen
tygib said:
wat
you should look on a computer screen
Click to expand...
Click to collapse
And you think MDP looks better? OK good luck with that...:good:
ldeveraux said:
And you think MDP looks better? OK good luck with that...:good:
Click to expand...
Click to collapse
I never said anything about either one looking better than the other. I commented on you saying they look exactly the same, which they don't. Congrats on being a sarcastic dumbass when you're wrong. :good:
tygib said:
I never said anything about either one looking better than the other. I commented on you saying they look exactly the same, which they don't. Congrats on being a sarcastic dumbass when you're wrong. :good:
Click to expand...
Click to collapse
I don't care
ldeveraux said:
I don't care
Click to expand...
Click to collapse
You cared enough to type out a reply after hitting quote reply, so obviously you do care. Thanks for trying though.

What is "ro.sf.compbypass.enable=1" in build prop??

What is "ro.sf.compbypass.enable=1" in build prop??
Dont know, i just know it does improves call quality or smth or improves gaming performance when set to 0 along wuth a bunch of other stuff
Liogy said:
What is "ro.sf.compbypass.enable=1" in build prop??
Click to expand...
Click to collapse
It affects Rendering / GPU.
hmm okay nice to know.
jwoegerbauer said:
It affects Rendering / GPU.
Click to expand...
Click to collapse
Thanks
Kenora_I said:
Dont know, i just know it does improves call quality or smth or improves gaming performance when set to 0 along wuth a bunch of other stuff
Click to expand...
Click to collapse
Thanks...

Categories

Resources