im using moto g xt1033 with gpe 5.1 i converted it to gpe and updated it to 5.1. i tried installing custom recovery and there are glitches occurring in recovery i ignored that and tried installing custom rom based on lollipop . i couldnt install any custom rom based on lollipop. please help me install custom lollipop in my phone.thanks in advance.
muthu138 said:
im using moto g xt1033 with gpe 5.1 i converted it to gpe and updated it to 5.1. i tried installing custom recovery and there are glitches occurring in recovery i ignored that and tried installing custom rom based on lollipop . i couldnt install any custom rom based on lollipop. please help me install custom lollipop in my phone.thanks in advance.
Click to expand...
Click to collapse
Flash a gpt.bin file of some other firmware and then flash a ROM or flash GPE 4.4.4 firmware and then continue.
andogeek10 said:
Flash a gpt.bin file of some other firmware and then flash a ROM or flash GPE 4.4.4 firmware and then continue.
Click to expand...
Click to collapse
i will get glitches when i flash 4.4.4 gpe .it wont be a problem right and i need to know that weather i can directly downgrade from 5.1gpe to 4.4.4 gpe
muthu138 said:
i will get glitches when i flash 4.4.4 gpe .it wont be a problem right and i need to know that weather i can directly downgrade from 5.1gpe to 4.4.4 gpe
Click to expand...
Click to collapse
Yes you can directly downgrade. Avoid flashing motoboot.IMG since as of now there are changes of bricking. You'll have screen flicker only on GPE 4.4.4. After flashing thee screen will not flicker any more.
andogeek10 said:
Yes you can directly downgrade. Avoid flashing motoboot.IMG since as of now there are changes of bricking. You'll have screen flicker only on GPE 4.4.4. After flashing thee screen will not flicker any more.
Click to expand...
Click to collapse
what to flash to avoid flickering
Related
Guys,
I converted my Moto G XT1033 in to GPE 4.4.4 and tried flashing CM12 and I am getting unable to mount /system partition Error.. now i flashed back to 4.4.4 stock retail Rom..
I am planning to give a try flashing the CM12 over GPE 4.4.2... So can I convert my Moto G running 4.4.4 Retail stock to GPE 4.4.2 ? I tried searching the forum, couldnt find any guide.. Can anyone help me with the steps I should skip while flashing the GPE 4.4.2 over 4.4.4 stock rom..
Thanks in Advance
padhu1989 said:
Guys,
I converted my Moto G XT1033 in to GPE 4.4.4 and tried flashing CM12 and I am getting unable to mount /system partition Error.. now i flashed back to 4.4.4 stock retail Rom..
I am planning to give a try flashing the CM12 over GPE 4.4.2... So can I convert my Moto G running 4.4.4 Retail stock to GPE 4.4.2 ? I tried searching the forum, couldnt find any guide.. Can anyone help me with the steps I should skip while flashing the GPE 4.4.2 over 4.4.4 stock rom..
Thanks in Advance
Click to expand...
Click to collapse
convert ut xt1033 using this guide here http://forum.xda-developers.com/showthread.php?t=2739919 and download the cm12 anerik build flash twrp recovery after converting ur phone then in recovery mode clear data,cache and system now flash the rom reboot ur phone it will take some time to boot up then again reboot to recovery and flash dsp fix again reboot to recovery and flash superuser beta v2.27 thats all enjoy the lolipop hit thanks if i helped
Mods.. I wrongly posted in the general section.. Kindly move it to QA section.
Hi,
My search skills are very bad so pardon me if this has been asked too many times.
I've read somewhere that downgrading is possible by manual method without flashing the gpt and motoboot file.
Once downgrade is done. is it possible to install a custom kitkat rom afterwards?
You should be fine. Flashing gpt.bin file is necessary when coming from a GPE to non-GPE ROM. GPE and non-GPE do not use the same file format for user data.
audit13 said:
You should be fine. Flashing gpt.bin file is necessary when coming from a GPE to non-GPE ROM. GPE and non-GPE do not use the same file format for user data.
Click to expand...
Click to collapse
I have a moto g global version xt1032.
Thanks. I actually installed lost101's optimized 5.02 which i did not think was a gpe version. however, I downgraded to 4.4.4 using a script to 4.4.4 gpe. I am getting ota for 5.0.1. If I do want to update to it sometime, will it work?
If you are on stock 4.4.4 with stock recovery and unrooted, OTA should work.
Guys help me Ibricked my moto g .Here is what i did
I have a XT1033 on stock lollipop with unlocked bootloader. So i first flashed cwm using fastboot, booted fine in recovery and back to system.
Then i again entered fastboot mode and flashed TWRP 2.8.5 for XT1032(There was no specific for xt1033). Booted fine into recovery , took a backup of entire rom .It was fine till now. Then when i booted into system the phone was stuck at boot logo. It kept on restarting again and again and when i entered fastboot mode to enter into recovery the recovery partition was also corrupted and it was stuck at teamwin logo.
but the bad things didnt end here.When i flashed stock firmware using fastboot the system sparsechunk files falshed with an error "FILE IS TOO LARGE". I tried both 4.4.4 and 5.0.2 but its still stuck at bootlogo.
PLEASE HELP ME DEVS
here u go
Happened with me once
Follow this:
1.Flash gpe 4.4.2 firmware( u may have xt1033 but still flash it)
2.Don't update the gpe to 4.4.4 or ur device will hardbrick(don't cry afterwards)
3.flash asian 5.0.2 firmware from fastboot
4.enjoy!
is it safe to flash gpe 4.4.2 over over 5.0.2
And if i flash it am i supposed to flash it with or without gpt.bin and motoboot.img
and also while flashing asian 5.0.2 are these two commands needed to be flashed.
srisurya95 said:
Happened with me once
Follow this:
1.Flash gpe 4.4.2 firmware( u may have xt1033 but still flash it)
2.Don't update the gpe to 4.4.4 or ur device will hardbrick(don't cry afterwards)
3.flash asian 5.0.2 firmware from fastboot
4.enjoy!
Click to expand...
Click to collapse
is it safe to flash gpe 4.4.2 over asian 5.0.2(because flashing a gpe rom changes partitions on the device)
And if i flash it am i supposed to flash it with or without gpt.bin and motoboot.img and after flashing gpe 4.4.2 do i need to boot into OS or i need to directly flash 5.0.2 over it
and also while flashing asian 5.0.2 are these two commands needed to be flashed.
please reply
thanks
PS: Can you provide me the link to gpe 4.4.2 firmware and the fastboot commands i am not able to find them
sjandroiddeveloper said:
is it safe to flash gpe 4.4.2 over asian 5.0.2(because flashing a gpe rom changes partitions on the device)
And if i flash it am i supposed to flash it with or without gpt.bin and motoboot.img and after flashing gpe 4.4.2 do i need to boot into OS or i need to directly flash 5.0.2 over it
and also while flashing asian 5.0.2 are these two commands needed to be flashed.
EDIT:- after flashing,boot into OS
please reply
thanks
Click to expand...
Click to collapse
Flashing fastboot files will never hard brick the device...just don't play with OTA's
and yes while flashing 4.4.2 skip gpt and motoboot and while flashing asian 5.0.2 no need of skipping
srisurya95 said:
Flashing fastboot files will never hard brick the device...just don't play with OTA's
and yes while flashing 4.4.2 skip gpt and motoboot and while flashing asian 5.0.2 no need of skipping
Click to expand...
Click to collapse
sorry but you didnt answer all my questions-
1 will flashing gpe 4.4.2 change partitions on device which will result in errors while flashing asian 5.0.2 over it
2 do i need to boot after flashing 4.4.2 gpe
and please provide the link for gpe 4.4.2 with fastboot commands because they are different from stock motoroms
sjandroiddeveloper said:
sorry but you didnt answer all my questions-
1 will flashing gpe 4.4.2 change partitions on device which will result in errors while flashing asian 5.0.2 over it
2 do i need to boot after flashing 4.4.2 gpe
and please provide the link for gpe 4.4.2 with fastboot commands because they are different from stock motoroms
Click to expand...
Click to collapse
yes u have to boot
Hello forum, basically, when I got my moto G, it was on 4.3, so I did all the bits, and the step i did after all the rooting unlocking etc was upgraded my bootloader to the lollipop one (ending in 8 i believe) - which i wish i didnt do, and cant downgrade to 4.4.4 (or can I without bricking)......right back to the story.......the problem now is, whenever i try uninstalling apps, or wiping data in any app etc, my phone does a reboot, I installed the brazillian 5.0.2 flashable rom (the optimised one) which worked perfectly, did all the correct wipes etc, but it reboots when uninstalling apps......, and thought i would try dirty unicorns....works well except the rebooting problem...... help....what can I do????????
I read somewhere that maybe to solve it, you gotta change runtime from dalvik to ART, but there is no option to change this....
There are no 5.0.2 uk images available that i have read (so i cant completely get back to complete factory settings)
I really wished i kept the KK bootloader!!!! so who can help me????? I want to try some of the great CM11 builds!!!
Since your bootloader is unlocked and you have the lollipop bootloader, I suggest flashing the stock 4.4.4 (not 4.4.2) ROM for your xt1032 (you will not be able to flash the motoboot file so don't bother trying), upgrade the Motorola apps via Play store, and take the 5.02 OTA update.
FInd your stock ROM here: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1
audit13 said:
Since your bootloader is unlocked and you have the lollipop bootloader, I suggest flashing the stock 4.4.4 (not 4.4.2) ROM for your xt1032 (you will not be able to flash the motoboot file so don't bother trying), upgrade the Motorola apps via Play store, and take the 5.02 OTA update.
FInd your stock ROM here: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1
Click to expand...
Click to collapse
do i have to update to 5.0.2 again? as i want to try cm11 again
@audit13 is this a flashable zip, or do you need to do it via fastboot? as its got a bootloader included in the zip (4.4.4 kitkat bootloader)
The files from filefactory need to be unzipped and flashed via fastboot or mfastboot.
You do not need to do anything with the stock ROM if you want to install a custom ROM. All you need to do is install a compatible custom recovery and a custom ROM. I suggest flashing right to the latest CM12 rather than using CM11.
I suggested flashing back to the stock for your phone and upgrading to 5.02 via OTA to see if the uninstall problem goes away.
yep understood @audit13 read your other posts on this matter too, the reason I want to use a cm11 rom, is I had a moto g about 8-9 months ago, and there was a rom i loved, and it was cm11 based......will i brick if i do flash this cm11 rom? i know about flickering bug, and possible hard brick if i went back to versions below 4.4.4 ...... and i love cyanogenmod roms, as i dont get irritating moto updates etc
Flashing CM11 should not be a problem as CM11 ROMs do not touch the bootloader or modem.
so basically, downgrade to the 4.4.4 firmware file, and cm11 and im done? yeah?
You can try to flash cm11 directly over stock 5.02. If it doesn't work, you may have to flash back to stock 4.4.4, install recovery, and then flash cm11.
I have converted my moto g to gpe. I've literally love the speed of 5.1 and can't go back.. Since all ROMs for 5.1 are buggy(at least for me) I've decided to try official ota gpe. I know I should revert back to stock kitkat gpe which is easy but I'm afraid the ota update for lollipop might brick my device since it's not gpe and that it already has lollipop bootloader from dual sim moto g. Is it possible to do this without running into fatal issues ?
It's not worth the risk. Moto G is getting old now, if you brick; there might not be a firmware image to get you out of it. I will create a flashable zip when a TWRP backup is available.
lost101 said:
It's not worth the risk. Moto G is getting old now, if you brick; there might not be a firmware image to get you out of it. I will create a flashable zip when a TWRP backup is available.
Click to expand...
Click to collapse
alright then, i will wait for a stable lollipop 5.1 build. Thanks !
YOu can flash the 4.4.4 firmware and OTA it to 5.0.1
but if u flash 4.42 firmware,ur phone will be hard bricked
So whats u have to do is
flash 4.4.4---->flash 5.0.1---->flash 5.1
voila