i have a lg revolution with the new update 2.3.4 on it .. recently rooted with esteem and it worked downladed and flashed a rom ( Revoltrom1.5) and i didnt back up before i did so .. now my phone will boot up jus fine with this rom but its not working correctly on my phone and it wont activate by the sim card now.. how can i get everything back to stock or a rom that works please help me
go to your phone's manufacturer site or search xda for the stock rom that comes with your phone
Don't write your title with "help me"!! But, write your problem in few words, for the other people and for the future...
Thanks!
Hi!As described in the topic title i have about 10 months a stock SNS 4G I9023.
Installed 4.0.3 full custom ,seen much difference in the beggining but major issuses but now lag,battery problems.....I have readed that the 4.0.4 came out ,and i have tried to manually install it but i have came up with the blank recovery problem.Tried under lamp and bright light but nothing . I am fed up with google and it's !!#I(@#*@.So i let you(the experts) to suggest me what is the best rom,kernel for me to install ,and to update to 4.0.4. also if you can add a quide cause i am a noob!I don't care if i get my phone rooted !I wan't the best for the money i spend on my phone.
Thanx for your time
Nexus s 4G
I9023
IML74K
sorry if i made mistakes !
just flash the CWM, and you're good to go...
Hello,
can i install this rom on my optimus 3d
ICS 4.0.4 Custom Full 3D ROM
os 2.2.2
baseband l6260_modem_sic_01,1042
kernel 2,6,35,7
broj vrzije frg83g
ver softvera lg920-v10d-jul-08-2011
so far I've already installed the Acura Team 3D, LiquidBeats V3.0, KING_3D_ROM and on any i dont hawe network : (
I did successfully return to the old version
but my mob working bad , and I therefore like to change to ICS 4 rom
but I fear that it will again be without success, and I'll just lose time with no success
so I would like to say that if anyone can make this or any other rom instead factory rom
Not to forget that I bought phone in the operator store Telenor Serbia
p.s.
Sorry for bad English
Today I tried to install .. and installation and start at about 15% said that everything is ok successfully installed and reset the mob stuck on lg logo
what to do please help
Try this:
http://forum.xda-developers.com/showthread.php?t=1244490
not so in general .. I went through zipa on the SD card ..
I hold power and volume, and when I go to open the instal rom from sd
sombadi help plz
It's the same problem as mine . But me 27 % stuck in it .
I tried smart flsher and it worked . I do not how did it do it . but it worked . And now my phone ICS
Sent from my LG-SU760 using xda app-developers app
Zlocesti said:
Hello,
can i install this rom on my optimus 3d
ICS 4.0.4 Custom Full 3D ROM
os 2.2.2
baseband l6260_modem_sic_01,1042
kernel 2,6,35,7
broj vrzije frg83g
ver softvera lg920-v10d-jul-08-2011
so far I've already installed the Acura Team 3D, LiquidBeats V3.0, KING_3D_ROM and on any i dont hawe network : (
I did successfully return to the old version
but my mob working bad , and I therefore like to change to ICS 4 rom
but I fear that it will again be without success, and I'll just lose time with no success
so I would like to say that if anyone can make this or any other rom instead factory rom
Not to forget that I bought phone in the operator store Telenor Serbia
p.s.
Sorry for bad English
Click to expand...
Click to collapse
first of all you have to change the BASEBAND and the ROM.
FLASHING ZIP ROM with CWM will NOT change your ROM from version to version (2.2 ->2.3 -> 4.0) !!!!
Once you install OVER THE COMPUTER your ROM (in KDZ or FLS+BIN) then you can play with custom roms.
so if you did this before install Acura ICS rom then proibabvly you lost you IMEI.
this check when you write on your dial pad *#06#
if it is empty - you should restore it - check the developer section how to do that.
I'm just so lost imei. Then I did a restore and everything was like when I bought the mob. Then am via CWM intall king rom and everything worked but I not have network. so I did restore again and now my phone is terribly slow. I'd like to install ics rom .. so if you could explain to me in detail how to make a switch or a link where what to do. as the phone was bought in the mobail operator and is SIM lock
Zlocesti said:
I'm just so lost imei. Then I did a restore and everything was like when I bought the mob. Then am via CWM intall king rom and everything worked but I not have network. so I did restore again and now my phone is terribly slow. I'd like to install ics rom .. so if you could explain to me in detail how to make a switch or a link where what to do. as the phone was bought in the mobail operator and is SIM lock
Click to expand...
Click to collapse
If you want to install gingerbrad ROM's you must update your phone to gingerbread, you can do this with official LG program or with kdz installer http://forum.xda-developers.com/showthread.php?t=1287236 and then install rom.Or if you want to install xbsall ICS port go http://forum.xda-developers.com/showthread.php?t=1956347.
Gutted Mate!!
But you Cannot UPGRADE from GingerBread ( Thats what you Had on phone originally ) To ICS through your phone using Clockwork Mod
your phone will try, but you will just end up confusing it like you have done,
http://forum.xda-developers.com/showthread.php?t=1956347
follow this thread and read every post from Page 1, then read all post in links to other helpfull threads like this one
http://forum.xda-developers.com/showthread.php?t=1244490
i found this helped
http://forum.xda-developers.com/showthread.php?t=1942836
but tbh i cant really stress enough,, that you need to read read read lol,, and if still not sure read some more :good:
Good Luck buddy
hi i have a lg p500 rooted and i have CWM installed i have installed to different custom roms 1 jb and ics and both did not let me use mobile , i worked out it was a baseband problem, so now i want to install gb official on my phone going the whole official lg way so i can get the new baseband but my phone has never connected with my pc properly and i cant use the mobile support tool properly, next problem i wont brick my phone right, going from a rooted 2.2 to a non- rooted 2.3 with a cwm recovery instead of the normal 1, thanks :cyclops: , sorry for my noobiness
RECENTLY I STARTED HAVING BATTERY PROBLEMS WITH MY SAMSUNG GALAXY S DUOS
I LOOKED UP ON THE WEB AND SAW THAT CUSTOM ROOM'S MAY SOLVE MY PROBLEMS
I INSTALLED A CYANOGEN OS BUT STILL THE BATTERY PROBLEM PERSISTED
THEN I BOUGHT A NEW CHARGER
IT SEEMED THAT THE NEW CHARGER SOLVED MY PROBLEM
SO I DECIDED TO SWITCH BACK TO MY STOCK FIRMWARE
I THOUGHT THAT WHY NOT TRY STOCK FIRMWARE OF ANOTHER DEVICE
BUT BY DOING THIS I ENDED UP WITH THE-->>"FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE" ... BLAH... BLAH... BLAH
THEN I DOWNLOADED STOCK FIRMWARE FOR MY DEVICE ONLY AND FLASHED IT
IT GOT RUNNING
BUT AFTER A FEW DAYS I GOT BORED WITH THE LAGGY STOCK FIRMWARE
SO I SEARCHED XDA FOR ANOTHER CUSTOM ROM FOR GT-S7562
I DECIDED TO FLASH THE PMP LIGHT ROM ESPECIALLY MADE FOR GT-S7562
BUT AFTER FLASHING IT I HAD GSM CONNECTION PROBLEMS
SO BACK TO STOCK ROM AGAIN
BUT THIS TIME WHEN I FLASHED THE STOCK ROM IT GOT STUCK AT THE SAMSUNG LOGO
I COULDN'T GO INTO RECOVERY MODE THEN
SO I CORRUPTED THE DEVICE AGAIN AND INSTALLED THE STOCK FIRMWARE
BUT AGAIN BOOT LOOP NO BOOT SOUND AND NO RECOVERY
I TRIED MANY THREADS
I TRIED http://forum.xda-developers.com/showthread.php?t=2426426
I TRIED http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791
AND MORE AND MORE THAN THE NUMBER OF NERVE CELLS IN MY BODY
SO...
PLEASE ANY HELP WOULD BE APPRECIATED
I WROTE THIS WHOLE THREAD WHILE CRYING:crying::crying::crying:
hey download stock rom files alone ..... like pit and csc etc ....
and flsah them this will work
i'm very bad in english ...sorry :silly:
I have tried before but without success any way thanks i will try it once again
boy maztoul said:
hey download stock rom files alone ..... like pit and csc etc ....
and flsah them this will work
i'm very bad in english ...sorry :silly:
Click to expand...
Click to collapse
didn't work !!