Q&A for [ROM][OFFICIAL][Lollipop 5.0][HAMMERHEAD] PAC-ROM LP Beta-1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][Lollipop 5.0][HAMMERHEAD] PAC-ROM LP Beta-1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello fellow PACs.
(Possibly) quick question on otg and PAC ROM. (Apologizes if it has already been asked)
Recently been using a otg ready memory stick to store photos and what nots..I had noticed in settings that under the information for apps there was an option to move to USB storage.
However when I select it it gives me not enough storage space on device.. It is a 32gb stick which have tried formated in both fat32 and NTFS yet it doesn't seem to work.
Do I require an additional app to fulfil this request or must I change kernel.. Would be greatful for some advice or guidance to a post explaining it:good:
Once again apologizes if it has already been asked
b0xfr3sh said:
Hello fellow PACs.
(Possibly) quick question on otg and PAC ROM. (Apologizes if it has already been asked)
Recently been using a otg ready memory stick to store photos and what nots..I had noticed in settings that under the information for apps there was an option to move to USB storage.
However when I select it it gives me not enough storage space on device.. It is a 32gb stick which have tried formated in both fat32 and NTFS yet it doesn't seem to work.
Do I require an additional app to fulfil this request or must I change kernel.. Would be greatful for some advice or guidance to a post explaining it:good:
Once again apologizes if it has already been asked
Click to expand...
Click to collapse
What build are you running?
my95z34 said:
What build are you running?
Click to expand...
Click to collapse
Running on build lrx22g from the 2015.04.08 nightly
On stock kernal( from PAC)
b0xfr3sh said:
Running on build lrx22g from the 2015.04.08 nightly
On stock kernal( from PAC)
Click to expand...
Click to collapse
Hmm. Just tested and got the same result. I'll look more into it later. Unless you can get me a log first, lol
Bootloader compatibility
Nexus 5 using MultiROM.
ROMs:
Internal: Lollipop 5.1.1
Secondary: Cyanogenmod 12 (cm-12-20150416-NIGHTLY-hammerhead)
JorgeRamirez_P said:
Nexus 5 using MultiROM.
ROMs:
Internal: Lollipop 5.1.1
Secondary: Cyanogenmod 12 (cm-12-20150416-NIGHTLY-hammerhead)
Click to expand...
Click to collapse
If you read the error, you'll see your issue.
Related
Q&A for Lollipop - OPO - Pure Aosp 5.0 - Test Build only -16/11/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Lollipop - OPO - Pure Aosp 5.0 - Test Build only -16/11/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bugs
navendugoyal said:
This is a pure AOSP 5.0 - Lollipop - build compiled from source .
I would highly recommend it to be used only by developers and advanced users.
The build just completed and am uploading the image files for you to do whatever you please.
The idea is to get it out there so others can take a look and use it to make it better.
Please give your comments and updates if you do plan to use it on your device.
ADVISORY -
First build -likely to be highly unstable.
I am not responsible for any damages caused whatsoever.
This is for test purposes only, however it should work well.
I am out of town for next 24 hrs.. therefore can't provide too much hours into it as of now. Will await all of your responses.
images uploading - Links soon..
Regards
Click to expand...
Click to collapse
Will the bugs be of the current CM12 Lollipop that we are facing or you have rectifed some of the issues? Thanks for upcoming build btw. It would be great if you could provide us with the link to the gapps thatworks with this rom best and a little intructions on how to flash it for noobs friendly if they choose to proceed with the flashing of this dev rom.
Awesome! Thank you.
Q&A for [ROM] SlimKat [4.4.2] [BUILD 5] [Stable + Weeklies]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] SlimKat [4.4.2] [BUILD 5] [Stable + Weeklies]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello, does anyone have the weekly 7.4 (6152) download link. I've looked in the website, but can't find it. Thanks in advance.
Edit: Nvm, found a copy.
Probs installing slimkat Slim-crespo-4.4.4.build.9.0
Just FYI to anyone trying this - first a dirty flash, then a clean flash of Slim-crespo-4.4.4.build.9.0-WEEKLY-8321 with the Slim_normal_gapps.4.4.4.build.8.x-385. Both installed fine but wouldn't connect to google servers during initial setup - i'd connect to wifi or 3G data (which I verified was connected and working) and enter my google login and it would immediately say "Couldn't sign in". This was the same behavior for both the dirty and the clean flash. Then I clean flashed the Slim-crespo-4.4.4.build.8.20-WEEKLY-8172 zip with the same gapps as above, same problem. Then I flashed the full gapps, same problem. Finally, what worked, was I clean flashed the Slim-crespo-4.4.4.build.8.20-WEEKLY-8172 with the MINI gapps (Slim_mini_gapps.4.4.4.build.8.x-385) from the slimroms apge, and then that worked, and connected to google account login..... hope it helps someone else.
Hello guys, I'd like to install the latest stable version (Slimkat 4.4.2 build 5) on my gf's Nexus S. As this will be my first custom ROM install, I wonder which (minimal) slim_gapps build to use. I managed to get a copy of the 4.4.2 build 5. Or is it safe (or recommended) to use the 4.4.4 build 9?
Thanks in advance.
Hi!
Currently I have a CM11 M8 installed in my Google Nexus S.
I would like to know how much SlimKat is faster and lightweight than CM11?
Does it uses considerably less RAM memory?
Thanks!
hitchhikerkiller said:
Hi!
Currently I have a CM11 M8 installed in my Google Nexus S.
I would like to know how much SlimKat is faster and lightweight than CM11?
Does it uses considerably less RAM memory?
Thanks!
Click to expand...
Click to collapse
Yes it's "faster" on benchmarks, but by only 100's of points.., and yes it is lightweight (nearly 100mb smaller).., and ram usage is very similar per how I used them..
Sent from my A0001 using XDA Premium 4 mobile app
Setting.Out said:
Yes it's "faster" on benchmarks, but by only 100's of points.., and yes it is lightweight (nearly 100mb smaller).., and ram usage is very similar per how I used them..
Sent from my A0001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks Setting.Out!
I decided install SlimKat on my phone yesterday (Google Nexus S/crespo) and I could check this with my own eyes.
It is slightly faster.
It is lightweight in size.
And the TOTAL RAM available in Settings, that was 386MB in CM11, is 409MB in SlimKat.
[Q&A] [Nexus5] [31.07>>SOKP-V-1-KK444-KTU84Q] [SOKP》》SONIC OPEN KANG PR
Q&A for [Nexus5][31.07>>SOKP-V-1-KK444-KTU84Q][SOKP》》SONIC OPEN KANG PROJECT][AIO][Weekly Builds]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Nexus5][31.07>>SOKP-V-1-KK444-KTU84Q][SOKP》》SONIC OPEN KANG PROJECT][AIO][Weekly Builds]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Does someone have SOKP 4.4.4 download link?
Please can someone put a download link for SOKP 4.4.4, thanks, I can't find it anywhere.
Someone please put download for SOKP 4.4.4
Does someone has the downloaded 4.4.4 version of the SOKP? If you do, please upload it and put the download link here, thanks.
Crashing report for sokp
So I flashed the sokp rom which as some of you may know is based on cyangogen 12.1 currently. however after flashing gapps and supersu through the latest version of twrp, services, apps, and processes started to crash and after only 6-10 min android system would crash and I would be forced to restart the device.
My guess is kernel issues, but has anyone else run into this issue
ps. im on the nexus 5
Problem fixed
I posted somthing earlier about multiple apps as well as android system crashing in sokp.
I would just like to say that the problem has been fixed in the 5.1.1 update.
and ps- nice Jobb on 5.1.1 :
ROM doesn't install
Whenever I try to download R3.1, it gives me this error. Could you please help me, thanks. I've re downloaded the rom numerous times in case I had an unreliable connection. Can someone please help me? Thanks
Please uptade the layers theme manager, every time I tried updating it showed Error: 505. I guess it's something to do with the app built into the ROM.
Q&A for CM12S released!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CM12S released!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Installation Failed
was using nightly before flashing the cm12 offical ota and using fanco kernel. Help please
For Oxygen OS to CM12s
Everyone on Oxygen OS can also flash this zip if you have the latest version of TWRP
I just did it and it works fine for me.
Steps to Follow : -
1. Downloaded cm-12.0-YNG1TAS0YL-bacon-signed.zip
2. paste it to ur phone
3. reboot into recovery
4.wipe dalvik cache,cache, system ,data ( do not wipe internal storage and usb otg)
5. Flash cm-12.0-YNG1TAS0YL-bacon-signed.zip(if you flash Super SU before reboot it is all right)
6. Reboot
HAve fun guys
Regarding.....CM12S released
Hi, does this give Lollipop 5.1??
Currently, having L5.1 with Unofficial CM12.1....curious to know.
Can some one pls reply
Cheers
SriVasYntBlruK said:
Hi, does this give Lollipop 5.1??
Currently, having L5.1 with Unofficial CM12.1....curious to know.
Can some one pls reply
Cheers
Click to expand...
Click to collapse
No this does not give 5.1
It is 5.0.2
Q&A for [ROM]Pico KK4.4.4 FIUI ROM 2.22
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM]Pico KK4.4.4 FIUI ROM 2.22. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Trickster22 said:
Hey I ported this rom to Samsung Galaxy Ace i ( s5830i ), it is armv6 device but luckily rom booted up but browser and wifi are not working and statusbar is always white and icons in settings app are wierd too. Help me
Click to expand...
Click to collapse
hi~ Im nic，from FIUI team.
and i saw your E-mail, and I will try to help u to fix something.
statusbar always strange， maybe u can try to write "fiui.argb.oder=1" in build.prop
Code:
fiui.argb.oder=1
cuz some old devices's RGB is different of new devices. so we tried to fix it. but i dont know is it work on ur devices. just try.
_Nic said:
hi~ Im nic，from FIUI team.
and i saw your E-mail, and I will try to help u to fix something.
statusbar always strange， maybe u can try to write "fiui.argb.oder=1" in build.prop
Code:
fiui.argb.oder=1
cuz some old devices's RGB is different of new devices. so we tried to fix it. but i dont know is it work on ur devices. just try.
Click to expand...
Click to collapse
Thank you for reply sir. I will try this solution for statusbar but what about browser and wifi. Do I need to copy some specific libraries from port rom to make them work? And in Settings app Icons are weird too