Related
Hi, I'm new to flashing roms and after installing CWM 6.0.4.7 on my xt1032 and rooting whenever i try to flash a rom it gets stuck in the boot animation. I have tried CM 11 Carbon rom and paranoid android. I don't know if I'm using the wrong GAPPS or what. Please help.
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
Ok thanks, I will try that when i have some free time. And how do you revert back to 4.3
never mind i found a post on how to testing now
Brick?
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Go back to Stock and start from Scratch.
As long as you can enter fastboot you should be fine.
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Worked
quizmaniac said:
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Click to expand...
Click to collapse
Yes thank you so much I'm back on 4.4.2 You guys are great
hello everyone
I have a question about PaulOBrien superboot root method (look in modaco forum the moto g root method 1).
I have a 16GB Moto G and updated to Kitkat via OTA.
yesterday I used the method 1 (superboot) on windows 7, to root my phone, and run it for the first time and ended on a black screen with green bars (supposedly normal). I power off the phone and turned on and load kitkat normally and noted that the phone was not rooted.
y tried the method for a second time and have the same results (ended on a black screen with green bars), but when kirkat launched, on the initial screen i saw a message "System UIDs Inconsistent. UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable." and the system didn't respond.
I performed a factory reset via stock recobey and kitkat showed the same message but let me in the "i´m feeling lucky button" worked this time. there I noticed that my device was now rooted but non app was able to access the internal memory due to some r/w permissions as I think, because when I try to copy files to the phone via USB cable, I get have the same denial, even whit ADB push i get the same message of permissions denial.
I need a way to solve this because in this actual stage the phone works but the apps have like no access to the memory making them unusable,
for example i cannot take a picture, or download a file, for some reason all google apps not work or force close every time.
I need a way to upload a .img file to the phone in order to perform a recobery or to make a fresh install via fastboot, donn't know how to make the phone let me wrhite files on it. :crying:
(note: sorry for my bad English)
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
As long as you can enter the bootloader you haven't bricked anything!!! so don't you worry!
I have two questions: when did you download the stock rom, did you check the MD5 ??? Are you sure that it wasn't a bad download ?
Additionally: are you sure that you have downloaded the appropriate ROM? Did you try to flash any other ROM?
will8578 said:
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
Click to expand...
Click to collapse
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
dreezz said:
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
Click to expand...
Click to collapse
I am having the same issue. I got this xt1032 after it was OTA upgraded to Lollipop 5.0.2 and I downgraded it to KitKat 4.4.4 Stock. Now I'm also getting stuck on the boot animations on every Custom ROM I try to flash on it.
Does anyone know if having the bootloader upgraded due to the Lollipop update has anything to do with this? mine is at Ver. 41.18.
EDIT: I was finally able to flash after Formatting Data from Recovery. Keep in mind this will basically delete everything from the internal storage and you need to put everything back there manually. Always make sure you backup your info/apps/music/fotos before Formatting Data.
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
A lot of users report issues not being able to flash rom's on 4.4.2 kitkat.
A fix is to downgrade to 4.3, then flash roms.
I dont know why. I bought my device upgraded to 4.4.2 already, and i can flash roms with no issues.
Search the forum for the topic and you will find the info you need.
Roshi69 said:
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It wont backup saying what error?
Twrp just said 'failed' in red writing after the data backup I think. And philz touch said something along the lines of Not being able to write a file into the \clockworkmod folder.
I bought the device with 4.4.2 on it and followed the guides after reading up about the problems etc but TWRP 2.7.0.0 had a lot of reports that everything was working on it so went ahead with it
Sent from my Nexus 5 using Tapatalk
Ya that's strange because philz works great for me. Do you have a USB otg to try an external backup?
Sent from my XT1032 using Tapatalk
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Roshi69 said:
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Click to expand...
Click to collapse
Why dont you use Clockwork mod recovery for flashing Rom. I have flashed 10 Roms with that and all are backed up with out any problems. TWRP has no official support for moto g, and instead of all that why don't you try Cyanogenmod ?
(sorry if my english is not perfect)
Hello,
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
I never had such problems on my Nexus..
Please help me, I don't know what's going on
TheSkweed said:
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
Click to expand...
Click to collapse
Same here. It may be possible to downgrade to 4.3 (see here), but would it then be possible to flash a 4.4.2-based custom ROM ? I'm not sure.
Heres the steps I took.
*******Before device was stuck at bootloop*******
1. Bought phone (XT1032)
2. unlocked boot loader
3. Rooted
4. Flashed Philz Recovery (wouldn't backup rom)
5. Flashed TWRP and CWM with same issue.
6. Flashed 2 ROMs to try it (TweakyOne + C-Rom, Both wouldn't boot. and tried on all recoveries.
********Steps after being stuck at bootloop*******
1. Followed this amazing guide here (https://www.youtube.com/watch?v=laU6NQ0LxR0)
2. Set up the stock ROM again
3. Flashed TWRP 2.7.0.0 via Fastboot
4. Backup worked successfully
5. installed CM11 and setup successfully
6. installed Lego rom just to assure myself (currently running this ROM)
I know this is no solution at all but just wanted to share my steps to see what maybe fixed my phone. possibly the stock 4.2.2 rom I flashed was the solution. Maybe the original factory ROM that came on the phone was the issue?
ok guys, stupid question time. i have been out of the hacking game for a while and havent been keeping up with the S3 since i was running a pretty stable version of cyanogenmod. i picked up a S5 last month and the S3 has just been sitting but the wifes phone is on its last leg so i figured i would update the S3 and give it to her since it would be an upgrade to what she has now. i was running CM 4.1.2 and tried to flash the 4.3 AllianceRom. did my usual, updated CWM, downloaded the rom, checked the MD5, flashed the new modem and rom using CWM and everything looked good. then it happened. stuck at the "galaxy SIII" logo screen. nothing got me out of it. wiped everything, tried a reinstall, downloaded the rom again and did an install, nothing. tried another rom and the install failed, tried another rom and again, install failed. so i had a copy of cleanrom 5.6 which is a 4.1.1 rom and damn if that didnt hand as well. so i did a battery pull and luckly it had installed and the phone actually booted up and into android. the only downside is for some reason i cant connect to wifi with the rom. so, i still want to try either 4.3 or 4.4 on this phone so the question is, WTF am i doing wrong that it wont boot? shouldnt i be able to go from 4.1.1 to 4.3 or 4.4 by just using CWM? help a brother out.
Make sure u cwm is the most recent
Sent from my SCH-I535 using XDA Premium 4 mobile app
Mylt1 said:
ok guys, stupid question time. i have been out of the hacking game for a while and havent been keeping up with the S3 since i was running a pretty stable version of cyanogenmod. i picked up a S5 last month and the S3 has just been sitting but the wifes phone is on its last leg so i figured i would update the S3 and give it to her since it would be an upgrade to what she has now. i was running CM 4.1.2 and tried to flash the 4.3 AllianceRom. did my usual, updated CWM, downloaded the rom, checked the MD5, flashed the new modem and rom using CWM and everything looked good. then it happened. stuck at the "galaxy SIII" logo screen. nothing got me out of it. wiped everything, tried a reinstall, downloaded the rom again and did an install, nothing. tried another rom and the install failed, tried another rom and again, install failed. so i had a copy of cleanrom 5.6 which is a 4.1.1 rom and damn if that didnt hand as well. so i did a battery pull and luckly it had installed and the phone actually booted up and into android. the only downside is for some reason i cant connect to wifi with the rom. so, i still want to try either 4.3 or 4.4 on this phone so the question is, WTF am i doing wrong that it wont boot? shouldnt i be able to go from 4.1.1 to 4.3 or 4.4 by just using CWM? help a brother out.
Click to expand...
Click to collapse
You need to use the latest PhilZ Touch Recovery (https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/) (just flash it in your current recovery). It is the best, and it works great. I would first go to "Wipe Data/Factory Reset" and choose to "Clean to Install a New ROM." Then I would go into "Advanced" and wipe dalvik cache. Then I would go into "Mounts and Storage" and format boot and modem. Then I would flash the newest modem (http://www.mediafire.com/download/v0als76t6nmtpbo/DNE1.modem.zip). Then finally install your ROM and then GApps.
yes, CWM was updated just before flashing. i installed the recommended modem for the rom i was installing. not sure why it was stuck at the logo on 4.3 when i flashed a 4.1.1 rom and it booted right up just fine.
resolved. thanks guys.
Mylt1 said:
resolved. thanks guys.
Click to expand...
Click to collapse
Curious to know what you had to do to get it working?
I have two (2) S3's that I need to update and they're both running 4.1.1 ROMs.
Any info would be much appreciated.
CenFlo said:
Curious to know what you had to do to get it working?
I have two (2) S3's that I need to update and they're both running 4.1.1 ROMs.
Any info would be much appreciated.
Click to expand...
Click to collapse
i used the Philz touch CWM found here, http://forum.xda-developers.com/showthread.php?t=2201860 worked like a charm.
jonny30bass said:
You need to use the latest PhilZ Touch Recovery (https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/) (just flash it in your current recovery). It is the best, and it works great. I would first go to "Wipe Data/Factory Reset" and choose to "Clean to Install a New ROM." Then I would go into "Advanced" and wipe dalvik cache. Then I would go into "Mounts and Storage" and format boot and modem. Then I would flash the newest modem (http://www.mediafire.com/download/v0als76t6nmtpbo/DNE1.modem.zip). Then finally install your ROM and then GApps.
Click to expand...
Click to collapse
I did all of the above and I can't get anything to work....
I updated to Philz, updated the modem and went to install a new ROM and it's error'ing out every time?
This phone was rooted from way back and it appears that I may have lost root... It's stuck at the Samsung Galaxy S III boot screen and I'm trying to get it to boot in to recovery at this time.
Edit: Was able to get in to recovery and restoring a backup now. Somethings not right when trying to go to a newer ROM.
CenFlo said:
I did all of the above and I can't get anything to work....
I updated to Philz, updated the modem and went to install a new ROM and it's error'ing out every time?
This phone was rooted from way back and it appears that I may have lost root... It's stuck at the Samsung Galaxy S III boot screen and I'm trying to get it to boot in to recovery at this time.
Edit: Was able to get in to recovery and restoring a backup now. Somethings not right when trying to go to a newer ROM.
Click to expand...
Click to collapse
Did you update to the latest version? If your on an old version and attempt to flash a 4.4 rom you will get a status 7 error everytime
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
ShapesBlue said:
Did you update to the latest version? If your on an old version and attempt to flash a 4.4 rom you will get a status 7 error everytime
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
I thought I updated to the latest Phliz and I do believe that's the error I was getting when I tried to load the ROM.
I'll check again Monday.
I appreciate the info.
The issue was with Philz.
I upgraded to the latest TWRP and loaded the new ROM fine.
I have the Nvidia Shield 16 Gig Wifi tablet and Ive only had it for about 2 months. I wanted to unroot and completely go back to out of the box settings. I flashed the stock recovery, and boot. When i flash system.img it says insufficient space. Im really freaking out over this. I now have CWM running as recovery, but im stuck in a bootloop/softbrick. Ive had this with other tablets before but it was fixable, Im stumped with this one. I really need help here. Please and thank you for help, I need it ASAP.
ProSniper54 said:
I have the Nvidia Shield 16 Gig Wifi tablet and Ive only had it for about 2 months. I wanted to unroot and completely go back to out of the box settings. I flashed the stock recovery, and boot. When i flash system.img it says insufficient space. Im really freaking out over this. I now have CWM running as recovery, but im stuck in a bootloop/softbrick. Ive had this with other tablets before but it was fixable, Im stumped with this one. I really need help here. Please and thank you for help, I need it ASAP.
Click to expand...
Click to collapse
So, basically you left your shield tablet without a rom installed? If you have CWM recovery, you could flash a Full OTA found here http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
It happened to me to. So I downloaded a Philz built in Jan (I googled it)**** and I flashed the full 2.1 ota.
You could flash the TWRP 2.8.5.0 found here:http://forum.xda-developers.com/showpost.php?p=58864006&postcount=90 and then flash the full ota.
Then, Im thinking, you could flash stock recovery. I'd recommend flashing TWRP though, I had a problem with CWM and I could not flash full 2.1 OTA with it.
PS: Did you try wiping system from CWM and then flashing system with fastboot?
****EDIT: I found the Philz I used: https://goo.im/devs/playground/shieldtablet/Philz_Touch-01-02-2015_14.18-TN8-WiFi.zip
but Ive moved forward to TWRP since I couldn't make nandroid backups with it.
NaminatoR1254jaime.sier said:
So, basically you left your shield tablet without a rom installed? If you have CWM recovery, you could flash a Full OTA found here http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
It happened to me to. So I downloaded a Philz built in Jan (I googled it)**** and I flashed the full 2.1 ota.
You could flash the TWRP 2.8.5.0 found here:http://forum.xda-developers.com/showpost.php?p=58864006&postcount=90 and then flash the full ota.
Then, Im thinking, you could flash stock recovery. I'd recommend flashing TWRP though, I had a problem with CWM and I could not flash full 2.1 OTA with it.
PS: Did you try wiping system from CWM and then flashing system with fastboot?
****EDIT: I found the Philz I used: https://goo.im/devs/playground/shieldtablet/Philz_Touch-01-02-2015_14.18-TN8-WiFi.zip
but Ive moved forward to TWRP since I couldn't make nandroid backups with it.
Click to expand...
Click to collapse
Okay I have to thank you a ton for getting my tablet working again. Only problem now, I cant system update anymore, I get an android guy with a red warning sign in him. Any suggestions?
ProSniper54 said:
Okay I have to thank you a ton for getting my tablet working again. Only problem now, I cant system update anymore, I get an android guy with a red warning sign in him. Any suggestions?
Click to expand...
Click to collapse
Probably because you have custom recovery still or you are rooted.
The android red guy happens bc you are rooted (it'll happen even if you have stock recovery).
To system update, you have to be without custom recovery AND unrooted.
EDIT: Im theoretically speaking. I am rooted, therefore, I dont update via OTA.
i tried to recover to factory but i am stuck at system.img which dun seem to be copying into my tablet i manage to flash twrp in and wat else can i do to make it working again?
thanks
Hey androids, I submitted this question as a reply to the guide thread already earlier... just thought it might get noticed in this forum alittle quicker... any help would be appreciated
I'm working on a recalled tablet that I rooted to keep using, and up until recently the ROM i had installed on it worked famously (bliss pop with android 5.1.1). Now, I was having some issues with it and thought "Well, i'll try out a different rom!"
So, I already had root (obviously) and I had already successfully installed a rom to this tablet... Using TWRP (both the 2.8.x.x I used previously and the newest one available for the shield) I have backed up, wiped, and flashed the images to 3 different roms + gapps for the appropriate versions...
first, I was going an issue with it mounting the \data partition so it wouldn't flash anything... then I repaired and rewiped the partitions, and got (what appeared to me in the logs) a clean and successful install of the roms. Each time I successfully flashed a ROM and GAPPs zips I would go to boot the ROM and my table would sit on the "NVIDIA" boot screen forever, never advancing to boot the ROMs.
I was worried that I had made a mistake and bricked the thing (though, it's been on borrowed time anyways being a recalled tablet). But I was able to force shutdown the tablet and reboot it into TWRP for another try. Each time I cleared the previous flash, wiped the cache and system partitions, and would get another clean install... but each time, it would get stuck on that same boot screen....
Anyone have any suggestions? thoughts? ideas? fixes? answers?.... anything? lol
Thanks folks!
Assuming you are trying to flash MM custom roms: You need the MM bootloader.
edisso10018 said:
Assuming you are trying to flash MM custom roms: You need the MM bootloader.
Click to expand...
Click to collapse
Is the newest TWRP *not* a MM bootloader?
TWRP is a recovery. A bootloader is a bootloader.
This is covered in every rom thread that updated from L to M.
lafester said:
This is covered in every rom thread that updated from L to M.
Click to expand...
Click to collapse
I'll re-look, the guides i've read have only covered flashing TWRP, then using them to flash the ROM and GAPPs... Which is what I did the first time I rooted it and put on a custom ROM... though maybe I didn't delete the original bootloader the first time and did so accidentally this time?
Thanks for the heads up though people, we'll see if I can straighten it out now that I know what I'm looking for
edisso10018 said:
Assuming you are trying to flash MM custom roms: You need the MM bootloader.
Click to expand...
Click to collapse
Ok, so I've downloaded the shield recovery zip, flashed the boot.img to the boot... nothing, then I read on one of the guides here that the "blob.img" is the bootloader... but the zip has a blob, without the .img
So I then attempted to add .img, and flash it to "boot" in TWRP, and there was an error, saying the file is too large...
do you (or someone else) know where to find a guide on where to find/how to flash a MM bootloader?
thanks
Ok, so I found guide with links to the latest firmware update; I flashed it, rebooted, and now I've gotta past the "Nvidia" boot screen into the Bliss boot screen... It's been here for a couple minutes now, gonna give it alittle bit and then try to install the other ROM I had tried.
MilesD37 said:
Ok, so I found guide with links to the latest firmware update; I flashed it, rebooted, and now I've gotta past the "Nvidia" boot screen into the Bliss boot screen... It's been here for a couple minutes now, gonna give it alittle bit and then try to install the other ROM I had tried.
Click to expand...
Click to collapse
Im stuk with the same probem, can you sendme the Link to the gide please