[Q] Bricked Photon Q - boots into recovery - Motorola Photon Q 4G LTE

I think I've just successfully bricked my Photon Q.
Right now I'm stuck with Clockwork recovery (v 6.0.1.3) and my system backed up.
I've tried to install CM12 (cm-12-20150330-NIGHTLY-xt897) but it gives me an error :
Code:
Installing update...
Warning: No file_contextsThis package is for device: xt897asanti_c; this device is asanti.
E: Error in sdcard 0 update zip (Status 7)
Installation aborted.
When trying to recover my system from backup it gives me :
Code:
E: format_volume: make_extf4fs failed on dev block platform msm_sdcc.1 by-name system
Error while formatting system!
Right now I'd like to install ANY CM that would actually work. Please help!

Flash the correct recovery.
Use the one in this: http://forum.xda-developers.com/photon-q-4g-lte/development/cyanogenmod-12-0-photon-q-t3034552
or this thread: http://forum.xda-developers.com/photon-q-4g-lte/development/cyanogenmod-12-1-photon-q-t3073781

Related

[Q] I need help install cyanogenmod 6

I'm new to rooting and installing custom roms. I used unrevoked 3 to root my ego, then I created an nandroid and wipe my phone. Next, I rebooted the phone to download the free version of ROM manager from the market. I used the ROM manager to download cyanogenmod 6 (stable). After downloading the rom, I did as the screen prompted me and wipe the phone and created a backup. From here the installation process begins and end with
Welcome to Cyanogenmod 6.0.0-supersonic assert failed: getprop ("ro.bootloader")="0.76.2000"//9.000"
E: Error in /sdcard/clockwork/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip
I haven't a clue what to do at this point.
Can someone please help?
"E: Error in /sdcard/clockwork/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip"
Read this link, I think it is about the same problem.
http://www.actuarialoutpost.com/actuarial_discussion_forum/showthread.php?t=195406&page=46
If I still can not post a link cause I am new, then I googled this:
mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip"
I got three hits, read the first one "maybe we need and android tweeking ...."
Also check this out. I am tempted to say you downloaded the link to the actual file that you want and not the file. Here is the link to the actual file.
http://mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-Supersonic-signed.zip
Click that link and then you download the file you need.
Ref:
http://androidforums.com/evo-4g-all-things-root/175655-cyanogen6-link.html
hey,
thanks for trying to help. I'm still having the same problem.
No app2sd partition found. Skipping format of /sd-ext. (is this the problem?????)
--Installing: SDCARD: /clockworkmod/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip
Finding update package...
Opening update package...
Installing update...
Welcome to Cyanogenmod-6.0.0-Supersonic!
assert failed: getprop("ro.bootloader") =="0.76.2000"
getprop("ro.bootloader")=="0.79.0000"
E: Error in /sdcard/clockworkmod/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-Supersonic-signed.zip
(status 7)
Installation aborted.
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue
PLEASE HELP....

[Q] How to's = Road block and dead end! Semi Bricked G2. E:Cant open / HTC stuck, etc

How to’s = DEAD ENDS or Road Blocks for my G2. PLEASE HELP!!
Let me just start from the beginning...
1st off..what I WAS running / am running or currently have on G2 :
Clockworkmod V3.0.0.5 (Was running Cyanogen Mod 7 RC1 when the crash and problems started)
VISION PVT SHIP S-OFF
HBOOT-0.82.0000
MICROP-0425
RADIO-26.03.02.26_M
EMMC-boot
Sept 2 2010 17:59:38
Okay, a few weeks ago I used ADB to manually achieve S-OFF. Was not able to achieve S-OFF thru terminal emulator, kept having su-bin issues. After S-OFF I successfully downloaded CyanogenMod 7. Flashed the new rom just fine and was running well until I started doing some downloading on the Market of different CyanogenMod Live Wallpapers / widgets, etc. After a certain download, phone froze, I rebooted and at start up I was only able to get the white HTC screen.
This is when the research on the forums and the” how to’s” began…
Booted in recovery and error message is as follows :
ClockworkMod Recovery v3.0.0.5
E: Can’t mount /cache/recovery/command
E: Can’t mount /cache/recovery/log
E: Can’t open /cache/recovery/log
E: Can’t mount /cache/recovery/last_log
E: Can’t open /cache/recovery/last_log
**YES I did back everything up after I achieved S-OFF, so not sure why having this issue.
Reading more forums and others who have had similar issues I then concluded it would be best to try and downgrade back to stock rom with no success. Issues / error messages are as followed :
Downloaded the stock_root.zip from forum and put on root of sd card, when I try and install zip from sd card in CWM phone is reading the following :
Finding update package…
Opening update package…
Installing update…
Amend scripting (update-script) is no longer supported. Amend scripting was deprecated by Google in Android 1.5. It was necessary to remove it when upgrading to ClockworkMod 3.0 gingerbread based recovery. Please switch to Edify scripting (update-script and update-binary) to create working update zip packages.
Installation aborted.
So then tried the PC10IMG.zip in CWM and am getting the following error messages :
--Installing /sdcard/PC10IMG.zip
Finding update package
E: Can’t open /sdcard/PC10IMG.zip (bad)
Installating aborted
Last try was applying the update.zip file from forum to root of sd card and when trying to install that in CWM I am getting the following :
Finding update package
Opening update package
Installing update package
File_getprop: failed to stat /system/build prop
E: Error in/sdcard/update.zip (Status 7)
Installation aborted.
EVERYTHING KEEPS FAILING!! LAST couple things…
When I restart in HBOOT …
HBOOT LOADING PC10IMG.zip
Parsing…[SD ZIP]
[1] BOOTLOADER
[2] RADIO_V2
[3] RADIO_CUST
[4] BOOT
[5] RECOVERY
[6] SYSTEM
[7] USERDATA
[8] SPLASH1
[9] TP
[10] TP
Do you want to start update now?
(Vol up = YES)
(Vol dwn = NO)
***After selecting YES, I get the following error message :
[1] BOOTLOADER –FAIL-PU
Partition update fail!
Update fail!
**** HELP HELP HELP please, someone..! I am about to just call insurance and order a new phone but that’s $130.00 I DO NOT HAVE!! I am still a bit new to this, this is my first g2 and a newbee to Android, love it, but please bear with me here! THANKs in Advance for reading and advice / help!
try updating clockwork mod
also how did you root your g2 when it has .82000 hboot
i cant find an hboot that will work with .82000
(visionary method)

[Completed] stuck in team win recovery all data wiped nexus 7 1st gen

So here is the problem, I have team win recovery v2.4.0.0, I wiped all the system and cache. After that I tried to install the rom I got witch is Autodroid-Grouper-4.4.4.build.1.2 and it failed
it goes like this :
Format and Mount System, Mount Data...
symlinks and permissions...
set_metadata_recursive: Some changes failed
E:Error in /sdcard/donwload/autodroid-grouper-4.4.4.build.1.2.zip
(status 7)
Error flashing zip '/sdcard/donwload/autodroid-grouper-4.4.4.build.1.2.zip
updating partition details...
now I can't connect the tablet to my computer to transfer a different rom in it because the tablet boot in team win
what should I do
XDA Visitor said:
So here is the problem, I have team win recovery v2.4.0.0, I wiped all the system and cache. After that I tried to install the rom I got witch is Autodroid-Grouper-4.4.4.build.1.2 and it failed
it goes like this :
Format and Mount System, Mount Data...
symlinks and permissions...
set_metadata_recursive: Some changes failed
E:Error in /sdcard/donwload/autodroid-grouper-4.4.4.build.1.2.zip
(status 7)
Error flashing zip '/sdcard/donwload/autodroid-grouper-4.4.4.build.1.2.zip
updating partition details...
now I can't connect the tablet to my computer to transfer a different rom in it because the tablet boot in team win
what should I do
Click to expand...
Click to collapse
Hello, and welcome to XDA!
TWRP should allow for adb access, you should be able to push a different ROM zip to your device. Such as:
Code:
adb push name-of-rom.zip /sdcard/
Then there is also the fire-breather method:
> Nexus 7 > Nexus 7 Q&A, Help & Troubleshooting > [GUIDE] Flashing a Factory Image with fastboot / return to stock
If you go this way, read and understand everything before continuing. Any questions about it, can go in that thread (once you have an XDA account).
Hope this helps, and good luck!

Failed to verify whole-file signature when updating with recovery

Hi,
I've downloaded the lastest nightly version for Nexus 5 for installing CyanogenMod into it. The problem is that when I loaded the zip into my phone using adb and the command "adb sideload <file>", it couldn't verify the file and gave me this message:
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
Click to expand...
Click to collapse
I've been searching for a solution but I couldn't find anything.
What am I doing wrong?
Thanks!
Well, it was simply my fault to not being properly informated...
The thing was that I didn't have my recovery image updated, so it couldn't install me a newer version because it didn't support it.
What I did was simply install a proper CWM recovery and thus, I was able to install my newly CM.
Hi Please can you send me the link to link to install cwm recovery. I have same issue stuck in e: signature verification failed

Question Problem updating arrowOS

I get an error when I install the system update.
I want to update manually via recorvery but I get an error: E: recvmsg failed (No buffer space available) do you have any ideas for this? System arrowOS
and assert failed: update_dynamic_partitions(package_extract_file("dynamic_partitions_op_list")) E:Error in /sideload/package.zip (status 1)
MAybe your downloaded file is corrupted?
No, I have that with every update. It only works when you reload the system. I reset the settings and everything and the same
It seems you are updating via sideload, maybe damaged data cable?
I changed the cable and the same
Why not just use OTA update?
TWRP latest beta and arrow recovery support that.
Never had any issue like that even when I manually updated in TWRP.
I just tried via OTA but an error pops up
Installation via TWRP: Updater process ended with ERROR: 1, Error installing zip file '/external_sd/Arrow-v12.1-vayu-Official-20220821-VANILLA.zip, Failed to mount '/system_root' (No such file or directory)
Jason355 said:
Installation via TWRP: Updater process ended with ERROR: 1, Error installing zip file '/external_sd/Arrow-v12.1-vayu-Official-20220821-VANILLA.zip, Failed to mount '/system_root' (No such file or directory)
Click to expand...
Click to collapse
Yup you're download is corrupt
I tried variously it does not work
Jason355 said:
Installation via TWRP: Updater process ended with ERROR: 1, Error installing zip file '/external_sd/Arrow-v12.1-vayu-Official-20220821-VANILLA.zip, Failed to mount '/system_root' (No such file or directory)
Click to expand...
Click to collapse
Flash MIUI Fastboot-Image, then ArrowOS. /system_root' (No such file or directory) <= not good.
If you are fast enough, you can boot directly into fastboot after successfully flashing MIUI and flash TWRP and ArrowOS. I did this on another phone a few months ago and it worked
Tried different ways to restore and nothing has helped. I downloaded Crdroid and solved the problem. Thanks to everyone for the answers <3
Jason355 said:
Tried different ways to restore and nothing has helped. I downloaded Crdroid and solved the problem. Thanks to everyone for the answers <3
Click to expand...
Click to collapse
That just means your download was 100% corrupted.

Categories

Resources