I was using
Device: LG Optimus One P500
Recovery: ClockworkMod 5.0.2.7
Kernel version: 2.6.35.10
Android version: 4.2.1
Current ROM: GenetICS 9.1.7
Then I downloaded another custom ROM [4.2.1]PACman 19.9.0 [PA][AOKP][CM](seems to be deleted now). Stating thats its some updated version of previous ROM.
Downloaded through XDA app and then opened it directly with ROM Manager to install it.
But unfortunately something went wrong and my phone got stuck on boot logo i.e. LG. :silly:
Then I tried to repair it with KDZ updater using V20c-00 firmware. Everything worked fine. I rooted it through SuperOne click and installed CWM recovery through ROM Manager. :victory:
Till then everything was looking under control.
After that I tried to flash another ROM through CWM Recovery, but again i got stuck on Boot Logo. I tried to repair it once again with KDZ updater as I did it previously, but everytime KDZ updater showed error.
Now my phone is not even responding to anything means not with hard keys combos or something. :crying:
I am not able to find any solution for this, even I searched it a lot.
Please please help me.
Edit: If only LG can help me now, can anyone tell me how much it will cost?
Unfortunately, if you removed the battery after KDZ gives out an error, you have hard-bricked your phone. Only LG can help you now
There is an emergency mode you can attempt, as long as you have the software on your computer to flash factory settings on to your phone.
To access emergency mode, do the following:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
*there is also a forum post somewhere here that I learnt this stuff off of...see if you can find it
a_loo said:
There is an emergency mode you can attempt, as long as you have the software on your computer to flash factory settings on to your phone.
To access emergency mode, do the following:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
*there is also a forum post somewhere here that I learnt this stuff off of...see if you can find it
Click to expand...
Click to collapse
I have not had any luck with KDZ or LGMDP with a device stuck in Emergency Mode. I have two P506's that are stuck in Emergency Mode, thanks to KDZ. I have tried every fix I can find here and on several other forums with no luck. I don't want to discourage you, but don't get your hopes up either.
I know this is OT, but...
This is the kind of stuff that we like to see from New Members here at XDA. This is the right way to get your 10 posts. Keep it up
shinobisoft said:
I have not had any luck with KDZ or LGMDP with a device stuck in Emergency Mode. I have two P506's that are stuck in Emergency Mode, thanks to KDZ. I have tried every fix I can find here and on several other forums with no luck. I don't want to discourage you, but don't get your hopes up either.
I know this is OT, but...
This is the kind of stuff that we like to see from New Members here at XDA. This is the right way to get your 10 posts. Keep it up
Click to expand...
Click to collapse
I remember being successful with the LGMDP in emergency Mode with the P500, even though the stock rom that i used didnt quite work with the phone it got me past the boot logo and gave me access back into my recovery. Once you can at least get into the recovery you are golden (for the most part).
OT:
Thanks shinobi. I've been lurking xda for a while now since i got the p500, just recently i really wanted to post in rashed's thread for issues/bugs i found with the cm10.1 rom
a_loo said:
There is an emergency mode you can attempt, as long as you have the software on your computer to flash factory settings on to your phone.
To access emergency mode, do the following:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
*there is also a forum post somewhere here that I learnt this stuff off of...see if you can find it
Click to expand...
Click to collapse
shinobisoft said:
I have not had any luck with KDZ or LGMDP with a device stuck in Emergency Mode. I have two P506's that are stuck in Emergency Mode, thanks to KDZ. I have tried every fix I can find here and on several other forums with no luck. I don't want to discourage you, but don't get your hopes up either.
I know this is OT, but...
This is the kind of stuff that we like to see from New Members here at XDA. This is the right way to get your 10 posts. Keep it up
Click to expand...
Click to collapse
a_loo said:
I remember being successful with the LGMDP in emergency Mode with the P500, even though the stock rom that i used didnt quite work with the phone it got me past the boot logo and gave me access back into my recovery. Once you can at least get into the recovery you are golden (for the most part).
OT:
Thanks shinobi. I've been lurking xda for a while now since i got the p500, just recently i really wanted to post in rashed's thread for issues/bugs i found with the cm10.1 rom
Click to expand...
Click to collapse
No luck to me guys. As I already mentioned that there is no response from phone, not even emergency mode.
Now I tried with even JTAG still no luck.
Went to LG day before yesterday as that was the only hope. But unfortunately my phone is out of warranty and the cost of motherboard is almost equal to the cost of phone itself.
So, that means I have no other option besides keeping it with me as a precious piece of brick.
Thanks to KDZ_Updater.
rishabhgangwar said:
No luck to me guys. As I already mentioned that there is no response from phone, not even emergency mode.
Now I tried with even JTAG still no luck.
Went to LG day before yesterday as that was the only hope. But unfortunately my phone is out of warranty and the cost of motherboard is almost equal to the cost of phone itself.
So, that means I have no other option besides keeping it with me as a precious piece of brick.
Thanks to KDZ_Updater.
Click to expand...
Click to collapse
Now my Phone has the same issue like you'r one. :crying:
Tried every hard button combo. no luck. Now woried because my phone also out of warranty.
Have you repaired your one?
How much cost you new motherboard buddy?
warlock911 said:
Now my Phone has the same issue like you'r one. :crying:
Tried every hard button combo. no luck. Now woried because my phone also out of warranty.
Have you repaired your one?
How much cost you new motherboard buddy?
Click to expand...
Click to collapse
Cost of motherboard from LG was 8800/- Indian Rupees. And the total cost of phone was 9999/- Indian Rupees.
But I got it repaired in 1800/- Indian Rupees with JTAG. Thanks to a local mobile repair shop.
But I am afraid that this service may not be available in your country.
I am also from India buddy. But I don't think so I could fund jtag in my city.
What is your location?
warlock911 said:
I am also from India buddy. But I don't think so I could fund jtag in my city.
What is your location?
Click to expand...
Click to collapse
I am living in delhi. What is your location?
I am from gwalior.
How much time taken by a jtag technician / shop to repair your mobile.????
warlock911 said:
I am from gwalior.
How much time taken by a jtag technician / shop to repair your mobile.????
Click to expand...
Click to collapse
It took around 1 hour.
Hmm
One hour... But 800 buks ... Let Mr see if it is available in my city.
Thanks
lg phoenix p505 softbrick fix
had an lg phoenix that kept giving status 7 errors when I tried to flash in recovery, failures in fastboot, and normal boot just went to black screen
Then I found "how-to-fix-lg-phoenix-fastboot-issues" a page that has working KDZ instructions (after a fashion), now it boots to an ugly fuzzy blue bad driver ancient version of android, but hey, it's alive again!
I would post the link, but spam filter prevents it. it was over at lg-phones dot org.
help
I am having same problem.
Can you tell me contact of mobile of repair shop
rishabhgangwar said:
Cost of motherboard from LG was 8800/- Indian Rupees. And the total cost of phone was 9999/- Indian Rupees.
But I got it repaired in 1800/- Indian Rupees with JTAG. Thanks to a local mobile repair shop.
But I am afraid that this service may not be available in your country.
Click to expand...
Click to collapse
search web for OCTOPUSBOX or MEDUSABOX, this are sites for JTAG sales but they offer software for free, maybe you will have luck
or bring it to repair shop, it will cost you around 20$
Could you pls tell me if this procedure helps in my situation?
a_loo said:
There is an emergency mode you can attempt, as long as you have the software on your computer to flash factory settings on to your phone.
To access emergency mode, do the following:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
*there is also a forum post somewhere here that I learnt this stuff off of...see if you can find it
Click to expand...
Click to collapse
Hi a_loo!
I Have a LG P500 2.3.3 V20e.
I rooted it today without any problem. Loaded ROM manager, flashed ClockworkMod recovery.
Then I downloaded from Cyanogen cm-7.2.0-p500.zip and placed it on the SD card.
And from ROM manager I did an "install ROM from SD card."
It worked for a while the it froze with a cyanogenmod 7 image. None of the controls & buttons and working.
I'm rather new and trying not to panic.
I'd really appreciate your assistance.
kocag said:
Hi a_loo!
I Have a LG P500 2.3.3 V20e.
I rooted it today without any problem. Loaded ROM manager, flashed ClockworkMod recovery.
Then I downloaded from Cyanogen cm-7.2.0-p500.zip and placed it on the SD card.
And from ROM manager I did an "install ROM from SD card."
It worked for a while the it froze with a cyanogenmod 7 image. None of the controls & buttons and working.
I'm rather new and trying not to panic.
I'd really appreciate your assistance.
Click to expand...
Click to collapse
Thanks to the post I was able to boot into recovery, then reload my old ROM from backup. Issue is closed.
Can u Plz upload the stock rom for lg in Kdz format
Sent from my GT-I9082 using Tapatalk 2
---------- Post added at 02:35 PM ---------- Previous post was at 02:29 PM ----------
Can u Plz upload lg stock rom in Kdz format
Sent from my GT-I9082 using Tapatalk 2
Bricked Lg P500
I hard bricked my LG P500 today. It seems there is no hope... No life at all. Oh well... Life sucks I'm in South Africa and don't want to spend money on older phone. I probably did something wrong with LG KDZ, trying to flash stock ROM.
After I flashed a power-on-logo zip(to fix the stripes), my device bricked. It does not even turn on the screen. What can I do? HELP!
Don't reply this, see xda thread [Q] N8000 Boot (not OS boot animation) cleared.http://forum.xda-developers.com/showthread.php?t=2682004
And managers please delete this.(thread)
Kavin Zhao said:
After I flashed a power-on-logo zip(to fix the stripes), my device bricked. It does not even turn on the screen. What can I do? HELP!
Don't reply this, see xda thread [Q] N8000 Boot (not OS boot animation) cleared.
And managers please delete this.(thread)
Click to expand...
Click to collapse
Your device is hardbricked!
Visit Samsung service because nobody can fix this...
One of my friends also had the same problem, he wasted his one month searching the Internet, visiting professional software developers and engineers.
Rarely some phones luckily turned on back.
You can visit this tutorial for fix:
forum.xda-developers.com/showthread.php?t=2625332
or search google for:Galaxy Note 3 Hardbrick.
Hope best of luck for you.
f_u_006 said:
Your device is hardbricked!
Visit Samsung service because nobody can fix this...
One of my friends also had the same problem, he wasted his one month searching the Internet, visiting professional software developers and engineers.
Rarely some phones luckily turned on back.
You can visit this tutorial for fix:
forum.xda-developers.com/showthread.php?t=2625332
or search google for:Galaxy Note 3 Hardbrick.
Hope best of luck for you.
Click to expand...
Click to collapse
Thank you, I (unexpectedly) got into the download mode, thanks to Tanker(need to press the key combination longer than usual, screen will stay off until you enter download mode, and can only enter download mode). I didn't thought that would exist in such a situation. And not turning on the screen really confused (and scared) me.
Also, N8000 is Note 10.1 (that's not important)
Hi i used app to root my phone and used a app to unlock boot loader. when I used the app to root my phone it worked for a little bit then it would reboot. well when it was rooted i got a app and unlocked boot loader and used clockworthmod and tried to go into recovery when i did that it wouldent power i have tried press buttons wont work. when i connect to PC i get DLOAD MODE the light on the phone will stay solid orange but when it sits for a few mins. it will start blinking and the PC doesn't recognize it. is there any way to fix. PLZ help answer quick. THX
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Im in deep problem and im unable to solve
its about my acer liquid e39 and just to make it clear im a nood to the whole flashing of android
now wat happen i have a habit to always keeping the settings( unknown sources ) on
the the other day i download a antivirus for my phone named (e mobile security and antivirus) from a torrent site
it worked grate but then i realized the the licences expired from 2014 so i decided try and download a new one
well i was hoping i could fined one in which i did.
now after i downloaded it i placed it in (Android Data com.eset.ems2 ) folder
any way after doing so the antivirus keep tell me the the downloaded file was a molar so i ignore it and poof that wen the phone start acting up things starts to force close and the phone start to restart by it self i have tried
uninstall an remove the program
factory reset the pone and the virus was still there thats wen the idea to flash a different single sim stock ROM
not realizing i should have backed up the original ROM
ive download a stock rom from (xda) did 3 times yep 3 times and a triple sim stock ROM also
after using the sptool to flash on the stock rom
Firmware (Acer_AV0K0_E39_1.011.00_EMEA_GEN1S )when it was done i unplug the usb and turnd on the phone it took awhile then i saw the welcome screen i sow so glad to see it :good: until i touched the screen trying to press next nothing happen
1. the touch was not working at all but it detect my sim card
i flash the phone 3 times and got the same problem
i open the sp flash tool to flash (Acer_AV0K0_E39_1.019.00_EMEA_CUS1)
Saw the welcome screen and the touch was working very well after finishing the set up the phone is telling me
2. Invalid imei
3. No sim card detected in slot 123
yet the card is in the phone and wen i remove the card the phone is saying( sim1 has been changed, the phone will restart immediately)
can someone plz help me fix the issues im having:crying::crying::crying:
Hello and thank you for using XDA Assist,
please create a thread here:
Android Q&A, Help & Troubleshooting
I hope there will be someone, who is able to help you.
Kind regards
Trafalgar Square
XDA Assist
So recently I have put myself in a sticky situation where I have bricked my s6 edge + By a stupid attempt to remove root through the supersu app. I have wiped the phone with the stock recovery options and it still wont boot. I am unable to get into download mode for some unknown reason so i can't just Odin a new os or whatever (as you can probably tell I have a very basic knowledge on phone rooting etc..) To make things even better is that my volume up button is broken but sometimes work if you smash it!
Please help me guys
Thanks
ollieshikarii said:
So recently I have put myself in a sticky situation where I have bricked my s6 edge + By a stupid attempt to remove root through the supersu app. I have wiped the phone with the stock recovery options and it still wont boot. I am unable to get into download mode for some unknown reason so i can't just Odin a new os or whatever (as you can probably tell I have a very basic knowledge on phone rooting etc..) To make things even better is that my volume up button is broken but sometimes work if you smash it!
Please help me guys
Thanks
Click to expand...
Click to collapse
You have already asked your question in the correct forum here
http://forum.xda-developers.com/s6-edge-plus/help/guys-help-t3450797
Thread Closed
Moderation Team