Related
Good morrning everybody.
Yesterday I tried to flash the circle battery found in ROM Manager into my Android 2.2 system. Clockwork Recovery suggested to run a backup, which I naturally did, and then it started to flash the battery into the system.
Until that point it worked fine and never returned an error or something else, but after the first reboot, the battery was properly replaced but nearly every app installed in my android crashes (googlemail, sms, phone, launcher pro, and so on) and my phone went into a boot loop.
Trying to restore my system with the Clockwork recovery manager also didn't work as it should, so I had to perform a full factory reset. (By the way, I got the same boot loop after trying to deinstall crapware via titanium backup)
My phone is a o2 - branded HTC Desire with Froyo, HBOOT-093.0001 and was rooted by unrevoked (S-ON).
Does anyone have an idea about that problem and know a solution? thanks in advance ;-)
cheers
PS: please forgive my when i wrote nonsense, it's 6 o'clock in the morning
Okay, I played a little bit around with my mobile phone and i figured something.
I made it to activate the plane mode before my phone decided to reboot again, so I managed to break this loop.
Now "only" "RSS-Reader, MMS, NewsReader, the Google Mail App, the "Google-Services-Framework (Prozess com.google.process.gapps)" and the Sense-Launcher crashes (maybe because I've a Mail shortcut or something on the screens, I don't know it exactly (using LauncherPro+)
I also read that flashing could set the ringtones to NULL (for the guys who aren't that deep into informatics: NULL = nothing; but NULL is not the number "0" (null-pointer-exception). I took a look into my settings but there are definitively ring tones set but unfortunately I can't take a look into my GMail app due to these crashes.
greetings
Cuupa
Try using Advanced -> Fix Permissions in CWM. It is supposed to help with FCs
Cuupa said:
Okay, I played a little bit around with my mobile phone and i figured something.
I made it to activate the plane mode before my phone decided to reboot again, so I managed to break this loop.
Now "only" "RSS-Reader, MMS, NewsReader, the Google Mail App, the "Google-Services-Framework (Prozess com.google.process.gapps)" and the Sense-Launcher crashes (maybe because I've a Mail shortcut or something on the screens, I don't know it exactly (using LauncherPro+)
I also read that flashing could set the ringtones to NULL (for the guys who aren't that deep into informatics: NULL = nothing; but NULL is not the number "0" (null-pointer-exception). I took a look into my settings but there are definitively ring tones set but unfortunately I can't take a look into my GMail app due to these crashes.
greetings
Cuupa
Click to expand...
Click to collapse
I had a similar issues on CM7 while the wrong gapps version was flashed :S
Hey guys, thanks for your reply.
@frosty_ice: from the CWM recovery menu (power + "vol-") I've only the options of
- reboot recovery
- wipe dalvik cache
- wipe battery stats
- report error
- key test
- restart adbd
- process dump
which are listed at "advanced"
When I select "fix permissions" in ROM Manager, it throws the error "Error while executing privileged commands" (translated from german, I don't know the original sentence)
I'm using ROM Manager v4.1.0.0
@metalron: I did not flashed any version of gapps, I only flashed the circle battery "SuperCircle Battery v.B" found at "Pinkolin - Pinky Desire". Does this automaticly flash other components into my system?
greetings
Cuupa said:
Hey guys, thanks for your reply.
@frosty_ice: from the CWM recovery menu (power + "vol-") I've only the options of
- reboot recovery
- wipe dalvik cache
- wipe battery stats
- report error
- key test
- restart adbd
- process dump
which are listed at "advanced"
When I select "fix permissions" in ROM Manager, it throws the error "Error while executing privileged commands" (translated from german, I don't know the original sentence)
I'm using ROM Manager v4.1.0.0
@metalron: I did not flashed any version of gapps, I only flashed the circle battery "SuperCircle Battery v.B" found at "Pinkolin - Pinky Desire". Does this automaticly flash other components into my system?
greetings
Click to expand...
Click to collapse
I think thats your issues, as far as I know you need gapps, that too the right version although most apps can be downloaded via market but then you need market and for some odd reason not flashing gapps or flashing the wrong one put me in a boot loop.. so im guessing its the same for you.
http://goo-inside.me/google-apps/
I have an LG Optimus V (Virgin Mobile) with 2.3.3 Gingerbread with aospcmod-ov-20110415-signed.zip running before becoming stuck in Android System Recovery. It happened when I tried updating the rom to aospcmod-ov-20110427. I had the proper gapps and follwed the flashing rom instructions from romrepo wiki. After that we lost clockworkmod recovery 3.0.0.6 . We then installed clockworkmod recovery 3.0.2.8 because it was the only one that would reinstall and it was recommended. Once it was installed no files from the sd card could be accessed so I removed clockworkmod recovery 3.0.2.8 . Once we removed cwm recovery 3.0.2.8 I was faced with the blue fastboot screen. To get out of the blue fastboot screen I had to use vm fastboot root. Once I did that I was able to go thru the full process of 1. Move all files you intend to flash to the root of your sd card (ex. aospCmod.zip, GAPPS.zip, kernel (optional)).
2. First you need to wipe/format your phone, in clockwork recovery: Wipe data/factory reset, wipe cache partition. Under Partitions menu (or Mounts & Storage in 3.0.0.6) in recovery: Format boot, system, data, cache. Under advanced: wipe Dalvik Cache.
3. Flash in this order:
A. AospCmod
B. GAPPS
C. Kernel (optional).
4. Reboot System
5. NOTE: On Optimus V when first logging in, if you click "Sign In" it will ask you to slide of your keyboard. Just go back and press "Skip." You can sign into your Accounts later in settings.
All of the processed went thru successfully and went to reboot and it rebooted back to Android System Recovery. I have checked my steps and tried this process continually but it keeps looping me back to Android System Recovery instead of loading the Rom.
Any suggestions would be greatly appreciated!
P.S. You can email me at [email protected]
Issue: Frequent STOPPED WORKING with com.gappas.com, com.phone.com and the other basic applications!
What I did:
1. Rooted the phone;
2. Installed ZAEM Launcher;
3. Used SD Maid to remove stock applications including the default LAUNCHER!
Now: No dialer, no contact list and the phone is actually stuck at the blank screen now.
Device:
Manufacturer: Symphony
Model: W100
Android: ICS
I realize I messed up removing the stock launcher, I didn't know it would also remove the fundamental applications.
Tried several FACTORY RESET (POWER + VOLUME UP) aka RECOVERY, but nothing worked. It seems SD Maid removed the stock applications from the RECOVERY image as well.
Please help me out. Thanks in advance.
Send a private message to this guy.
UPDATE
WORKAROUND for people with similar case.
WARNING: SD Maid will remove applications from the recovery image too, use with caution;
Steps:
1. Give it a factory reset with RECOVERY option;
2. Root the device;
3. Complete the setup wizard as far it takes you;
4. Upon setup wizard crash and NO LAUNCHER stuck situation, access SETTINGS by pulling down the top STATUS BAR;
5. Allow application installation from UNKNOWN SOURCEs & USB DEBUG MODE;
6. Use ADB to install ZEAM LAUNCHER (you can use management applications like WonderShare MobileGo as well);
After a while, you will see the ZEAM LAUNCHER appearing as the default launcher, configure and make it your own. From now onwards, this is your system default launcher and keep missing the stock one
Note:
1. With every RECOVERY RESET, you will need to install ZEAM LAUNCHER this way
2. I used ZEAM LAUNCHER, I believe you can actually go with any launcher;
SKJoy2001 said:
WORKAROUND for people with similar case.
WARNING: SD Maid will remove applications from the recovery image too, use with caution;
Steps:
1. Give it a factory reset with RECOVERY option;
2. Root the device;
3. Complete the setup wizard as far it takes you;
4. Upon setup wizard crash and NO LAUNCHER stuck situation, access SETTINGS by pulling down the top STATUS BAR;
5. Allow application installation from UNKNOWN SOURCEs & USB DEBUG MODE;
6. Use ADB to install ZEAM LAUNCHER (you can use management applications like WonderShare MobileGo as well);
After a while, you will see the ZEAM LAUNCHER appearing as the default launcher, configure and make it your own. From now onwards, this is your system default launcher and keep missing the stock one
Note:
1. With every RECOVERY RESET, you will need to install ZEAM LAUNCHER this way
2. I used ZEAM LAUNCHER, I believe you can actually go with any launcher;
Click to expand...
Click to collapse
So .. it is fixed now right ?
Anyway ..... i mean you still can use other launchers right ?
i mean Install some other Launcher for Now .......
And before doing this kind of thing you should always make nandroid backup !
And i removed my stock launcher for like ages ago .... first install the launcher you like > Set as default >> then remove the stock launcher !
SKJoy2001 said:
WARNING: SD Maid will remove applications from the recovery image too, use with caution;
Click to expand...
Click to collapse
There is no "recovery image" unless you make one in cwm or so.
The system apps are on the system partition the only way to remove a system app (if you don't want to just freeze it), is to delete it from there.
Upon factory reset, the /data partition (and some others) get wiped and the apps in /system/app (like the launcher) get reinstalled.
You can put apps there yourself and they will survive a factory reset.
sakibhasaN said:
So .. it is fixed now right ?
Anyway ..... i mean you still can use other launchers right ?
i mean Install some other Launcher for Now .......
And before doing this kind of thing you should always make nandroid backup !
And i removed my stock launcher for like ages ago .... first install the launcher you like > Set as default >> then remove the stock launcher !
Click to expand...
Click to collapse
Yes it is working now with another launcher. I didn't know SD Maid would affect the recovery image and things will be lost forever! Is there a way to flash custom ROM on W100?
Thanks for your time.
Dark3n said:
There is no "recovery image" unless you make one in cwm or so.
The system apps are on the system partition the only way to remove a system app (if you don't want to just freeze it), is to delete it from there.
Upon factory reset, the /data partition (and some others) get wiped and the apps in /system/app (like the launcher) get reinstalled.
You can put apps there yourself and they will survive a factory reset.
Click to expand...
Click to collapse
Yeah, that is where I wonder. After uninstalling the stock launcher with SD Maid, even a recovery didn't reinstall the launcher!
sakibhasaN said:
So .. it is fixed now right ?
Anyway ..... i mean you still can use other launchers right ?
i mean Install some other Launcher for Now .......
And before doing this kind of thing you should always make nandroid backup !
And i removed my stock launcher for like ages ago .... first install the launcher you like > Set as default >> then remove the stock launcher !
Click to expand...
Click to collapse
Hi,
Sorry, I was on the go waiting for bus and couldn't respond enough.
Yeah I applied the work around and the devices is fantastic now.
My mistake was that I couldn't realize SD Maid would remove the stock applications in a ways where they cannot be restored even with a RECOVERY! Bad, very very bad... lol
The device was stuck after turning on, where it would look for the launcher to manage the system interface, it was a partially HUNG situation, as there was no launcher to manage the interface and other basic operations. I used WonderShare MobileGo to install a 3rd party launcher, Zaem Launcher, and within 5 seconds, when the system had another try to initiate the default launcher, Zaem Launcher kicked in, ad it registered itself as a launcher and there were no stock launcher, so the system assumed it the launcher to start This was nice... very very nice.
But I know, if I give the device another RECOVERY, POWER + VOLUME UP, the same thing will happen again and I would have to follow the same workaround to make the device usable.
So far I can understand, the only thing that can bring the device to it's original state is a way to flash an intact ROM, preferably the stock ROM came with it. But the trouble is, this device has RECOVERY LOADER 3E which is well known no to be penetrated Please let me know if you have a way to replace this RECOVERY LOADER so other ROMs can be flashed on this device.
Thank you again Sir for your kind respons.
You are confusing something, SD Maid did not remove anything that can't be restored.
If you remove a system app, with any tool that can do that, a FACTORY RESET won't restore it.
You will either have to flash the ROM again, thus restoring the original content of /system/app, or copy the missing file over there again manually.
Dark3n said:
You are confusing something, SD Maid did not remove anything that can't be restored.
If you remove a system app, with any tool that can do that, a FACTORY RESET won't restore it.
You will either have to flash the ROM again, thus restoring the original content of /system/app, or copy the missing file over there again manually.
Click to expand...
Click to collapse
Dear Sir,
Yes you are correct and am sorry for my little knowledge in this. However, I wanted to mean what you said, check my earlier post, the only way seems to be flashing a ROM.
I said this because, I thought FACTORY RESET and RECOVERY are not the same thing. A factory reset is suppose to clean the user data only while a recovery should bring the device back to it's manufacturer state, by flashing the system with original set of OS and applications.
Although, in the recovery mode, it says FACTORY RESET, but it does more than that, I hope So I said I did recoveries, not factory resets. Still, I think you are correct, and you already know what I meant to describe.
Thank you again Sir for your time.
Hi .... But Sorry to say that W100 Still dosen't have any Custom ROM / Recovery ...
As you may already know MMX A90 and W100 is the Same ......
And Micromax Said They will release Jelly for A90 Soon and they will Also release There A90 Kernel Sources .......
So be sure to see some development for Your W100 in the near future ! :highfive:
And i sent many Emails to Symphony asking for the original files for W50/W100 and they diden't replay to me .....
But for Now you have to stick to what you have !
sakibhasaN said:
Hi .... But Sorry to say that W100 Still dosen't have any Custom ROM / Recovery ...
As you may already know MMX A90 and W100 is the Same ......
And Micromax Said They will release Jelly for A90 Soon and they will Also release There A90 Kernel Sources .......
So be sure to see some development for Your W100 in the near future ! :highfive:
And i sent many Emails to Symphony asking for the original files for W50/W100 and they diden't replay to me .....
But for Now you have to stick to what you have !
Click to expand...
Click to collapse
Hi,
Thanks for the reply. I think Google's stock JB ROM is worth a try but cannot find a way to flash it on W100 through RECOVERY MODE
Also do you think if copy all the contents from the /system partition of another W100 to mine, my W100 will come back to the stock apps situation as it were?
Yes it will work! But just take the files you only need ™
Sent from my Lenovo A60 using Tapatalk 2
Hi guys, been using this great phone.for.2 months already. Used a couple of roms in the past but returned to rooted, locked bootloader stock rom with the latest update. I just had a question is it possible to make the settings menu white witout being deodexed? Or at least without modification of system files. Please.note I do not have any sort of recovery installed. Just rooted so I can use greenify and Uninstal bloatware. I really like the white menu, been searching and only foind it in custom.roms. anyway I can do that on stock? thanks in advance. I've decided to.use.stock as I could.find lots.of.bugs.on the.custom roms. Aand.I really like the stock ui. ANY advice?
Hey mate, sorry to inform you but I think you have to deodex. However I think there is another way, I understand you prefer clean stock rom, I can't unlock my bootloader and it is indeed the fastest rom do the following, search on the themes and apps for Honami white settings and you will find a port that even has cpu control.
Go to your apps folder (use root Explorer); delete your settings and settings.odex, and now copy the files you downloaded from the port and copy them with correct permissions. Then reboot and I think you are all done. Also search for an app or way do delete your cache, including dalvik so you avoid errors. I'm thinking about doing this myself so try it and tell me if something went wrong so I can help
Q&A for [ ROM ][ Apr 14 ] Stock Rooted YNG1TAS0YL
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ ROM ][ Apr 14 ] Stock Rooted YNG1TAS0YL. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
You are my savior!!! :angel: I tried all version and all methods to mount cm12 on multirom as a secondary but nothing works :crying:, nothing except your version!!!! :victory: As primary i have your cm11 XNPH05Q may depend on this?
Can you tell me the default read ahead buffer size, scheduler, tcp congestion Control??? Thanks
Me too, same problem, i install this rom as secondary on multirom, have you resolved in some way?
YNG1TAS0YL Radio - will it give access to FM radio???
Sir Calkulin, ive just flashed the cm12s stock rom manually, will the YNG1TAS0YL Radio help me access to FM radio? or is this somethin else.. In case this update does help me access FM radio then how do i go about it.. my device is unrooted with bootloader still intact..
I'm a noob so please help me out here..
nitsleo85 said:
Sir Calkulin, ive just flashed the cm12s stock rom manually, will the YNG1TAS0YL Radio help me access to FM radio? or is this somethin else.. In case this update does help me access FM radio then how do i go about it.. my device is unrooted with bootloader still intact..
I'm a noob so please help me out here..
Click to expand...
Click to collapse
What FM radio? They're is no hardware in the OPO for it. The radio referred to is the mobile phone radio.
hi, i'm not able to get rid of the developer options crash in the settings menu. It was a clean install, initially it works, as soon as I reboot starts to fc and never works. I didnt flash any super su zip.
A question about changing the temperature unit.
Thanks for this great rom.
Just a quick question on how to change temperature unit from Fahrenheit to Celsius?
Hello!
As reported in the downloadthread there is a problem with the developer options. I have tried two installs, one as update and a second clean one, the result is the same. Setings get a fc when choosing developer options.
Any solution to this?
Best regards!
I have installed this ROM everything is working, except from i can't find the email app (Boxer) nor can i go into the developer options it comes up with a error report.
Here's what i did when i installed CM12S:
In TWRP recovery mode I did the following:
-Wipe data
-Wipe cache
-Wipe Dalvik cache
-Wipe Internal storage
-Wipe System
-Format data
So after that, no OS is installed.
Then:
-Reboot to recovery
-Transferred your ROM Plus the zip files along with the radio files flashed both files to my USB
Then In recovery mode:
-Connected the USB Flash through OTG cable
-Went to Mount and ticked the OTG
-Went Back
-Selected Install zip and selected to install the rooted stock CM12S zip and then afterwards I flashed the Radio files zip of CM12S.
Then:
-Rebooted and after the boot of the device, I turned off the device and rebooted to recovery mode again.
Then:
-Wiped data
-Wiped Cache
-Wiped Dalvik Cache
-Wiped Internal storage
-Format data
Then I rebooted and after the device booted I left the phone 3-5 minutes to settle.
-Settings
-Backup and Reset
-Unticked the 2 boxes
-Reset device
I then let the phone boot up and left it to settle to let it run the background processes run for 3-5mins.
Should I use the Official ROM then re-root the Phone again or have I missed something?
I haven't used any custom kernels i used the stock one installed that shouldn't cause any issues should it?
Nor do I have the F2SP partition I just used the default stock one installed on the phone.
BootLoop
I flashed it, but i got bootloop.
My device is stock 05Q, Rooted, TWRP Recovery.
Why this problem happen?
Someone please help me. I really want this update...
Hi, I notice an problem, when i flash an kernel like a boeffla beta2 or AK 140 and reboot, when go to the developers options, the application settings crash, and the root don't work. For example when i open titanium backup it say i don't have a SU binary installed and the same thing also happens with other app require root. The procedure i use to flash a kernel is, do an wipe cache and dalvik cache, flash a .zip kernel and reboot.
What can i do for install an kernel without this problem?
Sorry for my bad english, i'm italian.
EDIT: the developers options crash also without the istallation of an kernel, when i reboot the phone for the first time after the os12 flash the developers options crash.
so we can flash it as we do for the OTA or we should have a costum recovery ?
So just to be clear, I flash:
1) the ROM
2) the Extras
3) Reboot and we're good to go?
Missing Boxer
I too flashed this OTA ROM and am missing Boxer. The stock email was wiped away but nothing to replace it but Gmail. Tried flashing again and still nothing. Developer working fine for me. Any ideas?
Hi!
I have two very noob questions.
First:
Can i make clean install, whit keep my personal data, my app locations in the home screen and more.... ( I think no )
Second:
What does it mean "FC"? I am not an English pesron but i try to search that and I think this is not mean " finger cross, or football club..... ;-D"
RZeeyy said:
Hi!
I have two very noob questions.
First:
Can i make clean install, whit keep my personal data, my app locations in the home screen and more.... ( I think no )
Second:
What does it mean "FC"? I am not an English pesron but i try to search that and I think this is not mean " finger cross, or football club..... ;-D"
Click to expand...
Click to collapse
First: No - you'll have to install apps from scrartch, or use something like Titanium Backup or Helium if you want the data kept (not system apps though)
Second: FC = Force Close
Calkulin cm12s settings FC when going to dev options (seems to work)
Hi everybody, i had problems with access to developer options (integer causing com.android.settings crash) and thanks to GenghisZ's answer, i was able to repair this error without flashing rom again.
I have looked in /etc/init.d at 99firstboot you mentioned
I have moved file 99firstboot to another folder to disable it at startup
As it was creating persist.sys.root_access (with a '3' valuethat was causing the error?) in /data/property, i have also moved this file somewhere else.
After that, i have rooted it manually and it seems to work well.
I hope it can help other people... If you have this problem maybe we can try this.
I'm not a developper but i know linux a little.
Thanks for amazing site and read you soon
Hi maxx35000 ,
im currently using your latest build of your rom. The rom is great. my problem is that when i reboot , i dont get signal for both sim 1 & 2. i have to set it to flightmode. another problem im facing is when i go to settings and set lockscreen or change any settings in develepor options. The error is "Settings has stopped.". I already tried to clear data / wipe cache / dalvik. also i tried to flash fresh firmware then install your rom. Please help me. Thank You.