Hello, i have GOCLEVER QUANTUM 700, i forgot my pattern code, i need factory reset from boot loader but i can go to bootloader, i try volume up and power on button holding but its not working, please if you can help me
Recovery
To do a hard reset you must enter recovery. not bootloader.
To enter recovery power off your device and turn it on by holding VOL + and POWER in the same time.
If you don't enter recovery try holding both VOL + and VOL - and POWER.
If that doesn't work try VOL - and POWER.
One of the three should get you into recovery.
In recovery you can do a hard reset.
janekmuric said:
To do a hard reset you must enter recovery. not bootloader.
To enter recovery power off your device and turn it on by holding VOL + and POWER in the same time.
If you don't enter recovery try holding both VOL + and VOL - and POWER.
If that doesn't work try VOL - and POWER.
One of the three should get you into recovery.
In recovery you can do a hard reset.
Click to expand...
Click to collapse
Thanks for your reply, i try every method but dont have any effect, maybe that model dont have recovery mode? I have other android smartphones HTC and SAMSUNG and when i'm holding volume+ and power on key its go recovery mode
You are doing something wrong...
1986rom said:
Thanks for your reply, i try every method but dont have any effect, maybe that model dont have recovery mode? I have other android smartphones HTC and SAMSUNG and when i'm holding volume+ and power on key its go recovery mode
Click to expand...
Click to collapse
Every android phone/tablet has a recovery partition. You just get to it differently.
Try every possible button combination until you get into recovery.
Once you are in recevory select wipe data partition and you are good to go.
I try every possible way
janekmuric said:
Every android phone/tablet has a recovery partition. You just get to it differently.
Try every possible button combination until you get into recovery.
Once you are in recevory select wipe data partition and you are good to go.
Click to expand...
Click to collapse
I try every possible way ther is something wrong with this tablet.
AADB Perhaps
1986rom said:
I try every possible way ther is something wrong with this tablet.
Click to expand...
Click to collapse
Can you remember if you enabled ADB debugging in settings? If it is enabled it is very easy to go into recovery and I will tell you.
Related
Has anyone discovered a way to enter recovery without using ROM Manager? Like on other phones, we can hold down the volume and power buttons and it'll do it, but that only resets the G2x. Other options? All Google Apps were erased from stock when my phone crashed, so I have no way to restore the stock I have saved on my SD card.
Did you use NVFlash to flash CWM? If so, then you can indeed boot into recovery by holding the volume down and power buttons simultaneously. Just hold them for about 10 to 15 seconds and it should boot into recovery and not factory reset your phone.
From this thread by TGA_Gunman, http://forum.xda-developers.com/showthread.php?t=1056847
Booting into ClockworkMod Recovery
Power off your phone.
Hold Vol Down + Power.
Keep holding them, as soon as you see "ANDROID" in Green with the new boot logo let go of the buttons.
Click to expand...
Click to collapse
VisedMonk said:
Did you use NVFlash to flash CWM? If so, then you can indeed boot into recovery by holding the volume down and power buttons simultaneously. Just hold them for about 10 to 15 seconds and it should boot into recovery and not factory reset your phone.
From this thread by TGA_Gunman, http://forum.xda-developers.com/showthread.php?t=1056847
Click to expand...
Click to collapse
Yeah, I found it out the hard way, but it worked eventually! I wish I would have tried that the first time this happened to me. Thanks
Can someone tell me how to get into the stock recovery?
Power up in to H-boot (power + volume down) and choose recovery from there. It could be power + volume up, can't remember 100%
Why do you need stock recovery? nothing interesting there as far as I could tell....
borodin1 said:
Power up in to H-boot (power + volume down) and choose recovery from there. It could be power + volume up, can't remember 100%
Why do you need stock recovery? nothing interesting there as far as I could tell....
Click to expand...
Click to collapse
I Tried... I hit Recovery from Bootloader and all I got was a Triangle with Exclamation piont. Had to pull battery and power on.
Press volume up + power together in recovery to see options.
borodin1 said:
Press volume up + power together in recovery to see options.
Click to expand...
Click to collapse
Do you meen press volume up and power when your in the bootloader? I could not get into stock recovery from bootloader.
No. When you're in bootloader, scroll down to recovery using volume keys and select it using power button. Phone will reboot into recovery. Then, while you are seeing pic of a phone with exclamation point, press volume up and power button simultaneously to show text.
Sent from my HTC Sensation 4G
boot loop
I'm actually having a simular problem. I installed Apex onto my C Spire Milestone X. Loaded into a boot loop and i tried to get into recovery mode. It jus gave me a triangle wit (!) in it. How can i reset my device? Please help!!!!
most likely u need to load the htc bootloader / cid maybe even hboot...
Blacking06 said:
I'm actually having a simular problem. I installed Apex onto my C Spire Milestone X. Loaded into a boot loop and i tried to get into recovery mode. It jus gave me a triangle wit (!) in it. How can i reset my device? Please help!!!!
Click to expand...
Click to collapse
That is the stock recovery. Hold power and press vol up (I think, been a while since I've used it) to get the menu.
You should flash a recovery first, man.....if I understand the problem correctly
I upgraded my ROM from 1.3x to 2.1x using goldcard. After i ran the RUU, it said that the phone update went successful and now the phone just keeps turning on and off without even letting me go to hboot. Please help??
if u have nandroid back up just try to restore, if u dont re flash your rom just make sure that you wipe sytem, wipe cache and try to restore factory settings on the recovery menu just to make sure.
how can i wipe the cache and files, my phone does not even start up the hboot, pc could not even detect my phone. please help.
access recovery menu by pressing volume up + home button + power on at the same time hold it until your phone boots up, then release power button when the phone power up but keep pressing volume up + home button until it reaches recovery menu if it still doesn't work tell me we still have ways for that.
trich025 said:
access recovery menu by pressing volume up + home button + power on at the same time hold it until your phone boots up, then release power button when the phone power up but keep pressing volume up + home button until it reaches recovery menu if it still doesn't work tell me we still have ways for that.
Click to expand...
Click to collapse
Just confused, pressing "home button" included? also afaik its volume down+Power button.
Also, is recovery menu available even if you havent install CWM? i know its needs debugging to install CWM.
jerdict said:
Just confused, pressing "home button" included? also afaik its volume down+Power button.
Also, is recovery menu available even if you havent install CWM? i know its needs debugging to install CWM.
Click to expand...
Click to collapse
sorry "tol" kinda sleepy when i posted this, your right its volume down+Power, if the phone is already rooted there is a recovery menu already but not CWM, but you can install CWM using ODIN just find a CWM tar.md5 file so you can install this using odin.
its not working. i cannot get to recovery by pressing volume key + power key. any other way to do that?
Maybe your phone already bricked. Jtag will help you to resurrect your phone.
just rooted my one x
followed the steps here to install TWRP recover
but what i cant figure out is how to use it exactly.. from the project page it looks to be an app
and yes i am new to this **** lol
you can go to recovery using bootloader ( power off and press power +vol down ).. or use below command through adb ( device connected to pc ) - adb reboot recovery
Not good if you think custom recovery is just some app. You should do research and learn the importance and usage of custom reocvery.
kancherlapraneeth said:
you can go to recovery using bootloader ( power off and press power +vol down ).. or use below command through adb ( device connected to pc ) - adb reboot recovery
Click to expand...
Click to collapse
im new to rooting too. i also did the above but i thought it was (volume up + home button+ power button= recovery mode) ?
No, the correct combo is volume down + power to get to the bootloader, then select recovery from the menu (using the volume keys to move the cursor and the power key to select).
Sent from my Evita
First, before you do anything, read about what TWRP is and maybe watch some videos about the features or something so you don't come back with a formatted sdcard and no idea what to do
Sent from my HTC One XL using XDA Premium 4 mobile app
jmusg21 said:
im new to rooting too. i also did the above but i thought it was (volume up + home button+ power button= recovery mode)
Click to expand...
Click to collapse
It seems that you are getting your information from the wrong source. That is the completely wrong button combo, and keep in mind that every Android device has different button combos.
On this device, its power+vol down (release power after a few seconds, but keep holding vol down until the white screen comes up) to get into bootloader. From bootloader, select recovery. There is no button combo to boot directly into recovery.
Don't follow directions for other devices.
hi all
for solve all problems after update to nougat ..
just go to recovery by long press on (power and vol+ and vol-)
togather .. it will boot to revovery .
erease chache
then wipe data
(you have to make back up to your data)
then reboot
it will now start as new device
you will not find any problem .
(I TEST THIS WAY IN MY DEVICE)
it sccess ?
Yes, you just described factory reset. And to enter recovery indeed you need to press power and vol+ and vol- all simultaneously, but after you see the logo you should put your finger off the power button.
911-Future_Maker said:
Yes, you just described factory reset. And to enter recovery indeed you need to press power and vol+ and vol- all simultaneously, but after you see the logo you should put your finger off the power button.
Click to expand...
Click to collapse
LOL i have to say its tuff to get in to recovery if we dont follow your RULE
nandakis4 said:
LOL i have to say its tuff to get in to recovery if we dont follow your RULE
Click to expand...
Click to collapse
What do you mean? The phone won't reboot to recovery if you keep pressing the power button after the logo.
Way easier solution:
- After the update go to Google Play Store
- Check for updates
- Update all apps (this will include Chrome and maybe Google services)
- Reboot
Afterwards no issues at all.