Database Info

Broken Screen: Million Dollars Question PLEASE READ!!!

I have recently broke my XDA screen.
Does anybody know if the screen of the IPAQ 3630 is the same as the XDA? Is there any hardware modification to be done or the connectors are ALL the same?
People at Microsoft told me the Wallaby was designed after the Ipaq 3630, so most of the parts, including the screen should be the same.
Please advise. It could be helpful for a lot of people fouled by O2 with CRAZY requests for fixing the screen.

The ipaq 3600 series screen is bigger.

I have no idea about what you asked, but I would really like to know how you broke your screen?

shtali said:
I have no idea about what you asked, but I would really like to know how you broke your screen?
Click to expand...
Click to collapse
it is very easy to make the screen break ... just drop your XDA, it happened to one of my XDAs
regards, monika

i drop mine about 5x a day...(scratches on case, looseing that wen vibrates, it rattles alot)...thats why im SERIOUSLY lookin for a dummy model, but everytime i try to check on ebay, the auctions are over...so i tried going to TMO stores, or where ever they carry them, always ask the sales ppl if they could just sell me the model, an they never want to :roll: i jus tell em to order an extra one, an say sumone stole the old one....but since theyr too stcuk up to get a few extra $$$$ in there pockets, ima just have to "take" one

Basically the screen has imploded. I was talking, the screen went on power saving mode, and when ended the call it was broken.
O2 asked me too much money to repair, but I am sure the screen of the IPAQ 3630 is the same size, already checked.
Has anyone tried to open up both devices and check it?
Just want to know if connectors are the same.
Thanks

yes, my friend did open the device .... not mine but the similar unit - MDA, seems like it is a sony make, but according to his words IPAQ screen will not fit
BTW I have the same problem - I have two machines - one MDA with broken but functioning screen and XDA I do operate on a daily basis, I can make calls from both units ... but hesitating between repair and sale as is
regards, monika

gabbaid said:
Basically the screen has imploded. I was talking, the screen went on power saving mode, and when ended the call it was broken.
O2 asked me too much money to repair, but I am sure the screen of the IPAQ 3630 is the same size, already checked.
Has anyone tried to open up both devices and check it?
Just want to know if connectors are the same.
Thanks
Click to expand...
Click to collapse
You must have the only ipaq 3630 that has a screen the same size as xda1, I have one in front of me and I will eat my shirt on camera if you manage to get it into the xda1.

although I am not going to eat my shirt :lol: but I agree that screen sizes are different
regards, monika

cruisin-thru said:
I will eat my shirt on camera if you manage to get it into the xda1.
Click to expand...
Click to collapse
will it be web casted?
:wink:

I broke my screen by dropping it face down on a stone 1 week after buying it. I was insured by O2 for £4.99 a month and the next day I recieved a brand new one with all the accessories and I only had to return the main unit. I now have 2 batteries, headphones, cradles etc.

Butler said:
I broke my screen by dropping it face down on a stone 1 week after buying it. I was insured by O2 for £4.99 a month and the next day I recieved a brand new one with all the accessories and I only had to return the main unit. I now have 2 batteries, headphones, cradles etc.
Click to expand...
Click to collapse
Do you fancy selling all those XDAII extra's

Sorry, I find them really usefull, I have the cradle next to my bed and one attatched to my desktop. The spare battery is allways usefull as the main batteries are not very goo. that leaves me with a headset and a dummy SD card which i am sure are not very usefull to you. If it happens again I will contact you. Adam

[Q] Where to buy Replacement Battery?

Well since it looks like this will be the last decent QWERTY phone for a while I am getting ready to do some repairs on mine. My battery is horrible. I want to replace it. I can't find one to replace it online anywhere. Can someone point me to a website or similar replacement battery that will work? I also need to replace the vibration motor and cannot find it anywhere either. IF there is a website that has all the parts listed that would be of great help.
Thanks!

There about 20 bucks plus shipping on amazon cones with small screwdriver too
Sent from my SM-T217S using Tapatalk

matt2k12 said:
My battery is horrible. I want to replace it. I can't find one to replace it online anywhere. Can someone point me to a website or similar replacement battery that will work?
Click to expand...
Click to collapse
This was already answered no so long ago. You can replace the battery, but it's very likely that you will damage the NFC sticker in the process: http://forum.xda-developers.com/showpost.php?p=46575402&postcount=3
matt2k12 said:
I also need to replace the vibration motor and cannot find it anywhere either. IF there is a website that has all the parts listed that would be of great help.
Click to expand...
Click to collapse
Batteries are no problem: http://www.etradesupply.com/motorola/android-models/motorola-photon-q-4g-lte-xt897.html?limit=all, http://www.sinomobileparts.com/for-...lte-xt897-battery-eb41-replacement_p6167.html but overall there is surprisingly little number of Photon Q spare parts.

Zixione said:
This was already answered no so long ago. You can replace the battery, but it's very likely that you will damage the NFC sticker in the process: http://forum.xda-developers.com/showpost.php?p=46575402&postcount=3
Batteries are no problem: http://www.etradesupply.com/motorola/android-models/motorola-photon-q-4g-lte-xt897.html?limit=all, http://www.sinomobileparts.com/for-...lte-xt897-battery-eb41-replacement_p6167.html but overall there is surprisingly little number of Photon Q spare parts.
Click to expand...
Click to collapse
Does anyone have any other spare parts suppliers for this phone??

I have spare parts since one of mine has a screen driver fault, but I live in Germany so it wouldn't be economic I guess.

deepthought_s said:
I have spare parts since one of mine has a screen driver fault, but I live in Germany so it wouldn't be economic I guess.
Click to expand...
Click to collapse
....screen driver fault ?!? Contact me on PM and tell me more

flex cable
helo, how about flex cable for xt897, where to buy onlin and ship to indonesia ?..

Where to buy replacement Verizon s4 parts?

Is it possible to buy replacement parts, such as the USB connector at th e bottom of the phone somewhere? I see etradesupply sells it, but idk if I trust them. Does anyone know a good retailer?
Also witrigs had a lot of parts, but are they reliable>

thrgk said:
Is it possible to buy replacement parts, such as the USB connector at th e bottom of the phone somewhere? I see etradesupply sells it, but idk if I trust them. Does anyone know a good retailer?
Also witrigs had a lot of parts, but are they reliable>
Click to expand...
Click to collapse
You can trust etradesupply. Takes a few days to get to you, but worth the wait. I have ordered from them a few times and have gotten quality OEM replacements.

thrgk said:
Is it possible to buy replacement parts, such as the USB connector at th e bottom of the phone somewhere? I see etradesupply sells it, but idk if I trust them. Does anyone know a good retailer?
Also witrigs had a lot of parts, but are they reliable>
Click to expand...
Click to collapse
Of course at Samsung Service Center

thrgk said:
Is it possible to buy replacement parts, such as the USB connector at th e bottom of the phone somewhere? I see etradesupply sells it, but idk if I trust them. Does anyone know a good retailer?
Also witrigs had a lot of parts, but are they reliable>
Click to expand...
Click to collapse
I'd like to choose witrigs.com. I saw that the page of the USB board provides much information including product details and repair guide. I prefer the website like this.
You can see the page OEM Charging Port Flex Cable for Samsung Galaxy S4 GT-I9505.
Also i heard that the USB connector is soldered on the logic board, so it's difficult to replace. You may need the whole USB board, it's easier.

vinniej said:
You can trust etradesupply. Takes a few days to get to you, but worth the wait. I have ordered from them a few times and have gotten quality OEM replacements.
Click to expand...
Click to collapse
Witrigs is reliable. I contacted them by email and they responded within the same day. They let me know that there are currently no coupon codes, and that my item has shipped. The company is fairly new but they are on top of the game just as etradesupply is.
What i like about witrigs is that they explained why it is important to know which version of a part is needed for the Galaxy S4, as there are different models. The galaxy s4 camera are different across all models. If you buy the wrong one it won't work. Witrigs has videos and pictures explaining this on their site.
Etradesupply does not have the cameras that i needed in stock. They also are more expensive. And they did not let me know on their site that i need the certain camera for specific models of the S4.
I received my part in about 2 weeks. It came from China.

Z1c D5503 - screen replacement -- lcd + digitizer -- best deal for Europe ?

Hello,
I need to change my faulty z1c (D5503) screen (lcd + digitizer) for the 2d time in a few months (broken screen in the 1st time, water damage + alcohol isoprop ... in the 2d time) and choose the right seller.
I checked on the market + this forum and here are my findings :
1) Witrigs (100 US dollars, so quite expensive) http://www.witrigs.com/oem-lcd-with-digitizer-for-sony-xperia-z1-compact
2) Stellatech (quite expensive - 100 EUR) : http://stellatech.com/sony-xperia-z...lete-display-lcd-touchscreen,a,en,816110.html
3) Aliexpress : (24 us dollars ...) : http://www.aliexpress.com/item/For-..._73_74_75,searchweb201527_3,searchweb201560_9
Could anyone tell me if the 3) can be as good as the first 2 ?
Cheers to all

xabzzz said:
Hello,
I need to change my faulty z1c (D5503) screen (lcd + digitizer) for the 2d time in a few months (broken screen in the 1st time, water damage + alcohol isoprop ... in the 2d time) and choose the right seller.
I checked on the market + this forum and here are my findings :
1) Witrigs (100 US dollars, so quite expensive) http://www.witrigs.com/oem-lcd-with-digitizer-for-sony-xperia-z1-compact
2) Stellatech (quite expensive - 100 EUR) : http://stellatech.com/sony-xperia-z...lete-display-lcd-touchscreen,a,en,816110.html
3) Aliexpress : (24 us dollars ...) : http://www.aliexpress.com/item/For-..._73_74_75,searchweb201527_3,searchweb201560_9
Could anyone tell me if the 3) can be as good as the first 2 ?
Cheers to all
Click to expand...
Click to collapse
I bought exactly the 3rd, and it's really good!

Thanks,
This seller looks really trustful (the best seller around)
Have a nice day !

mateoo337 said:
I bought exactly the 3rd, and it's really good!
Click to expand...
Click to collapse
Can you share a pic of your Z1C with this screen pls?

i've got some through a dutch shop, costing me 77Eur, seems to me that it isn't exactly same as original sony as colors were quite different (too much saturated/red).
now it's only WITH a frame, not sure if that's easier to deal with for repair:
http://telecom2day.com/sony/sony-xp...ay-lcd-unit-met-frame-sony-xperia-z1-compact/
ps, aliepress is not fast in delivering stuff, so if you want it before the end of the year, better look somewhere else

I bought this one and mounted it myself, and i have'nt noticed any difference in quality from the original display. Just make sure to watch a video tutorial on how to change it.
Adhesive tape and correct tools was not included, but ordered from china.
http://www.ebay.com/itm/221822457294?_trksid=p2057872.m2749.l2648&ssPageName=STRK:MEBIDX:IT

Some how, I got unlucky and touch input broke down on me. Tried a lot,but phone is written off now. Went to nexus 5x and happy.

I bought a display from ebay for 30$, and it is working great. Not original though, but have'nt noticed any difference at all. Been using it for 3 months without a single problem.
It was this one: http://m.ebay.com/itm/UK-Touch-Disp...i-Compact-M51w-D5503-/221822457294?nav=SEARCH

To people who ordered from ebay: Which glue did you buy?
And what does it mean "no frame" ? Do you need to salvage this 'frame' from your broken screen?
I just broke my screen. Dropped it from 20cm at just the right angle I guess I've been doing some research, looks like you can't replace only the digitizer without special tools?

I've got mine from Ebay, it came with glue also. It has the same colors like the original one and it's working flawless for 5 months now.
Here is the link for the display I've bought.

Hello,
let me throw another hat in the ring: I bought my screen assembly from parts4repair, they sell them starting at 32 €. I bought the one for 42 €, as it is supposed to be the original replacement part. I did not realize any different colors. Delivery took about 6 weeks and packaging was really good (stable, well protected).
In another thread I already posted about this little project, here it is again:
I did completely disassemble my Z1compact recently and replaced back housing and the screen, using adhesive stickers (they were even said to be the original, real deal. I cleaned the contact areas with cleaning alcohol prior to reassembling the phone, so everything was just as intended). Everything worked fine, looked just as new - but after only 2 days, the adhesive did already start to loosen again in different areas!
I told a friend of mine about the problem (he fixes mobile phones the whole day long, as a profession), and he answered that they never use the stickers, but a special kind of silicone! The important part is, that it is a silicon which hardens without releasing acid (normally acetic acid is fumed out), so the electronic circuits do not become damaged. I bought one like this: Silicon Adhesive and everything worked fine It's been two months now and there are no problems, it's even water proof again.
Some comments: The silicone needs at least 24h to harden, I placed my phone under 4 heavy books in order to apply steady pressure during that time. That may have been a little bit too heavy, however, because the screen is a little bit lower than before and I can see small, somewhat "lighter" areas right where the contacts of the screen are, just the kind like pressing your finger on a lcd display too much. So better use only 2 books during hardening the silicone
Happy tinkering!

I got the same problem with my phone - I broke digitizer on my weekend trip... I don't know guys if it's an option for you, but in Poland you can replace screen much cheaper:
https://www.w-support.pl/klienci-indywidualni/koszt-naprawy.html (sorry, it's in polish... w-support is official Sony service - whole screen replacement costs 399 PLN (less than 100€)
If you want to do it yourself - you can look at our biding service - allegro:
http://allegro.pl/listing/listing.php?order=m&string=d5503+lcd&search_scope=category-19285&bmatch=base-relevance-w2-ele-1-3-0812
I bought LCD with digitizer, tools and glue for about 200PLN (less than 50€) and the seller claims it's an original one... Of course there may be some problems with foreign shipment but I think it shall work in EU for most of the sellers.
I let you know in a few day - I am waiting for delivery right now...

czarny1975 said:
I got the same problem with my phone - I broke digitizer on my weekend trip... I don't know guys if it's an option for you, but in Poland you can replace screen much cheaper:
https://www.w-support.pl/klienci-indywidualni/koszt-naprawy.html (sorry, it's in polish... w-support is official Sony service - whole screen replacement costs 399 PLN (less than 100€)
If you want to do it yourself - you can look at our biding service - allegro:
http://allegro.pl/listing/listing.php?order=m&string=d5503+lcd&search_scope=category-19285&bmatch=base-relevance-w2-ele-1-3-0812
I bought LCD with digitizer, tools and glue for about 200PLN (less than 50€) and the seller claims it's an original one... Of course there may be some problems with foreign shipment but I think it shall work in EU for most of the sellers.
I let you know in a few day - I am waiting for delivery right now...
Click to expand...
Click to collapse
any news?
i need to buy a new screen and i need to find the best value for money @Morfarj @eEnzo0 are you still happy with your screens?

broky said:
any news?
i need to buy a new screen and i need to find the best value for money @Morfarj @eEnzo0 are you still happy with your screens?
Click to expand...
Click to collapse
Mine is working flawless

I just bought a 30E sceen from ebay and it pretty bad because of the gamma levels...tried to adjust with white balance and it got a bit better..but still nowhere near as good as the original. For a 30euro screen i think i'll live with it..

czarny1975 said:
I got the same problem with my phone - I broke digitizer on my weekend trip... I don't know guys if it's an option for you, but in Poland you can replace screen much cheaper:
https://www.w-support.pl/klienci-indywidualni/koszt-naprawy.html (sorry, it's in polish... w-support is official Sony service - whole screen replacement costs 399 PLN (less than 100€)
If you want to do it yourself - you can look at our biding service - allegro:
http://allegro.pl/listing/listing.p...y-19285&bmatch=base-relevance-w2-ele-1-3-0812
I bought LCD with digitizer, tools and glue for about 200PLN (less than 50€) and the seller claims it's an original one... Of course there may be some problems with foreign shipment but I think it shall work in EU for most of the sellers.
I let you know in a few day - I am waiting for delivery right now...
Click to expand...
Click to collapse
I'm too from Poland and price for LCD replacing is...funny. Trying to find cheapest LCD to make it working for 2 months.. Any suggestions?
Wysłane z mojego D5503 przy użyciu Tapatalka

Yeah, that's great!

I made a post HERE about a water damaged screen, long story short after buying two cheap screens online and sending them both back for a refund because I wasn't happy with either of them I bit the bullet and sent my phone to Sony for a genuine OEM replacement to be fitted. Neither of the cheap screens came with the ASF and didn't have the foam that was attached to the back of my original.

XperienceD said:
I made a post HERE about a water damaged screen, long story short after buying two cheap screens online and sending them both back for a refund because I wasn't happy with either of them I bit the bullet and sent my phone to Sony for a genuine OEM replacement to be fitted. Neither of the cheap screens came with the ASF and didn't have the foam that was attached to the back of my original.
Click to expand...
Click to collapse
you must really love your z1c to pay that money,hope you enjoy it!
so it s a big difference sony OEM screen vs the cheap ones?
i replaced mine with cheap one(two times) and both times found the colours <<washed>> and low brightness too in comparison with OEM.

broky said:
you must really love your z1c to pay that money,hope you enjoy it!
Click to expand...
Click to collapse
A few People have said to me just buy a new one, but I do love it and want to keep it to use as my spare when I finally do, I want another Compact but the last few just haven't done it for me. It's killed me using my old Xperia Ray this last week and still have another week and a half to go. Going to flash GB to it this weekend and see if that makes it more bearable.
broky said:
so it s a big difference sony OEM screen vs the cheap ones?
i replaced mine with cheap one(two times) and both times found the colours <<washed>> and low brightness too in comparison with OEM.
Click to expand...
Click to collapse
The first screen had lifted a little so that made me question the adhesive too, from reading online I then thought it was because I hadn't cleaned the frame properly, so made sure I had before laying the second screen, but that eventually started to lift too. I found the same as you in regards to the screen, the colours just weren't right and had to use full brightness which then obviously chews through the battery. I even reflashed my phone to see if that made a difference, as we know there are two different panels used I thought maybe when the phone gets reflashed it may configure it for the display that's attached but it didn't.
If the X Compact had a better spec I would have bought it and a cheap screen for the Z1C as that would be going in the wardrobe along with the Arc S and Ray hopefully never to be seen again for another 50 years, but as it's going to be my daily for a little while longer I just want it perfect.
UPDATE:
Just heard back from Sony today and not good news. First of all they emailed me to say a quote was available to view in my support which basically said it was uneconomical to repair and offered an equivalent phone for a cost of £250+, baffled by their quote and comments I then got straight on the phone as all my Z1C needs to function is a screen , the operator told me to get the phone back to a guaranteed status the technician had wanted to replace more parts. To a degree I can see where they are coming from but having already had two screens on with no issues other than the poor quality of them it's quite annoying.
So as my hand has been forced a screenless Z1C will be going on ebay as soon as I get it back, and I'll be ordering a Z5C tonight.

Help with lcd replacement kit!

Ok guys I just ordered the cheapest lcd replacement kit(lcd+digitizer without frame) in just 1500₹(~22dollars) from eBay.
Link- https://m.ebay.in/itm/For-OnePlus-O...zer-Without-Frame-1-1-/272463439560?hash=NDY=
P.s.- I applied coupon so don't ask ques like how I got it in such less.
And it is sort of unbranded...
So my ques is that anybody tried any unbranded/generic brand lcd replacement? Is it worth the price and will it work fine? Should I cancel the order if you have better options?
I can get refund if it doesn't work but that's only in like 90% of the cases so what are your suggestions on it?
Thanks!

Looks like you could potentially end up with issues with this screen, if not now, later. If you venture over to /r/mobilerepair, the sidebar has some very good part sources. In my experience, most of the parts of ebay and amazon were "reject" parts that have been refurbished. That said, for a lot of legal reasons, it's hard to find replacement parts with oem logos. Never skimp on yourself when buying repair parts, as you really do get what you pay for in this industry.

Mydnytefantasy89 said:
Looks like you could potentially end up with issues with this screen, if not now, later. If you venture over to /r/mobilerepair, the sidebar has some very good part sources. In my experience, most of the parts of ebay and amazon were "reject" parts that have been refurbished. That said, for a lot of legal reasons, it's hard to find replacement parts with oem logos. Never skimp on yourself when buying repair parts, as you really do get what you pay for in this industry.
Click to expand...
Click to collapse
So what do you suggest?
Delivery from aliexpress takes 20 days to here so I don't think I can actually order from that.
Finding an oem one in resilient price is challenge.

Mr.Ak said:
So what do you suggest?
Delivery from aliexpress takes 20 days to here so I don't think I can actually order from that.
Finding an oem one in resilient price is challenge.
Click to expand...
Click to collapse
You're going to have to forget the idea of buying OEM, OEM replacement parts don't exist. The closest thing you'll find are OEM-grade or oem-equivalent. Have you ever repaired your OPO or any phone before? If not, I would suggest this one:
http://m.repairsuniverse.com/oneplus-one-lcd-touch-screen-assembly-with-frame-replacement.html
It has the frame attached, so there won't be any excessive getting or prying at glass, just transfer all the little stuff over.

Mydnytefantasy89 said:
You're going to have to forget the idea of buying OEM, OEM replacement parts don't exist. The closest thing you'll find are OEM-grade or oem-equivalent. Have you ever repaired your OPO or any phone before? If not, I would suggest this one:
http://m.repairsuniverse.com/oneplus-one-lcd-touch-screen-assembly-with-frame-replacement.html
It has the frame attached, so there won't be any excessive getting or prying at glass, just transfer all the little stuff over.
Click to expand...
Click to collapse
Yes sir,I do have experience with repairing phones,hardware and stuff and I can easily detach lcd from the frame.
I know eBay is not that trustable but can you see the link that I have given and tell me if it looks promising.
Thanks!
Edit: How can I see if the lcd replacement is OEM-equivalent or not? By it's price,brand or what?
Because the one I have ordered on eBay is unbranded but also the link you gave,doesn't carry any brand name either.
Thanks again.

If i'm not mistaken for OPO there only two manufacturers that makes those LCD replacement...JDI (original manufacturers) and LG (if i'm not mistaken)....there no way to find out which manufacturers that makes those LCD by looking that ebay or something but you can find out when you look closer once it got in your hand....
there two way to find out whether you bought a good LCD or not....
1. look at the hardware button - none original will have a dim/fade light on hardware button....
2. screen brightness - you will notice the differences when you moved the brightness to 100% or to the lowest...

iPusak Gaoq™ said:
If i'm not mistaken for OPO there only two manufacturers that makes those LCD replacement...JDI (original manufacturers) and LG (if i'm not mistaken)....there no way to find out which manufacturers that makes those LCD by looking that ebay or something but you can find out when you look closer once it got in your hand....
there two way to find out whether you bought a good LCD or not....
1. look at the hardware button - none original will have a dim/fade light on hardware button....
2. screen brightness - you will notice the differences when you moved the brightness to 100% or to the lowest...
Click to expand...
Click to collapse
Thanks! I just hope it work fine.