I can't flash a ROM because it keeps showing me that trebon error. I used to get the getprop error (Status 7). I checked a guide on the internet and I managed to delete that line by following the guide but now I get the Status 6 error.
I even have further problems. After the format now the phone keeps booting to CWM because all the files are deleted. I can put ROMs on my SD card using my other phone (I put the sd card in my other phone and then in this one with the files on it).
Please help me, I've tried 2 ROMs and they just won't work. They are CM11 I think and SpeedMod 2.5.1
Now I'm going to try PAC Man 4.2 build 2 and CM 10.2
By the way, flashing gapps works, I've already tried it for curiosity.
UPDATE 1: Tried PAC Man 4.2 build 2, not working at all. Tried to edit the lines, but no use.
Related
sometimes if i want to instal new rom to my device this message appear on cwm mode and the installation cannot procces :S ,
i tried to change the kernel from 7 to 8 but it still the error
some custom rom installed normally but i face problem when installing cyangomed , miui and vurrunt as example
please help me
this is the error :
opening update package..
installing update package..
check state of rfs/ext4...
assert failed :run_program("/tmp/updater.sh")==0
E:error in/emmc/cm9-galaxy sl-IM74k-alpha2.zip
(status 7)
installation aborted
it may be that if one rom has the sd card swap and another doesn't, and you have your sd cards set a certain way, the one that matches your setup will work and the other won't. if that's not how it works, then you may have a phone issue.
try to flash the stock firmware first and then flash the rom.
Sent from my GT-I9003 using XDA Premium App
There is no issues on the phone .. i can install roms normally but some roms like miui cyagnomed and vuttru make this problem .. i flash cyagnomed once and it continue installing without errors and then i flash miui rom too but i come back to custom roms and now im trying to install ics alpha2 and the message appear ... also trying to reinstall cyagnomed or miui and the message appear again ,,,,,,,
I tried to reflash stock firmwares and try again .. still the same problem
redownload the file then. I've had it happen where the download is short just a small amount of data, but it's reported as successfully completed, and then it messes up when trying to install.
Me too
supergaijin said:
redownload the file then. I've had it happen where the download is short just a small amount of data, but it's reported as successfully completed, and then it messes up when trying to install.
Click to expand...
Click to collapse
I have the same issue,
I'am on XXKPE, and when i install CM9-GalaxySL-IMM76L-Alpha11, i get error
PROBLEM SOLVED LONG TIME AGO
redownload your zip and then go to cwm and disable toggling and signature
Hi,
I have been having trouble install this rom http://forum.xda-developers.com/showthread.php?t=2452326 for my device, GT-I9003 (Samsung Galaxy SL)
The problem is that when I flash this rom, it will always display status 7 error and I have tried to modify updater script and reflash and redownload the rom multiple times with no success.
Thank you.
Daedalus1116 said:
Hi,
I have been having trouble install this rom http://forum.xda-developers.com/showthread.php?t=2452326 for my device, GT-I9003 (Samsung Galaxy SL)
The problem is that when I flash this rom, it will always display status 7 error and I have tried to modify updater script and reflash and redownload the rom multiple times with no success.
Thank you.
Click to expand...
Click to collapse
try flashing the Rom the way u downloaded and don't try any modification or dint unzip and rezip, flash a fresh download.
full wipe required to boot
in cwm go to mounts and storage and mount all that is unmounted.
Then flash the rom.
This is common to all 10.1 A1 and A2 roms.
Hello. Download and install again and all will be well.=))
catarifrangente said:
in cwm go to mounts and storage and mount all that is unmounted.
Then flash the rom.
This is common to all 10.1 A1 and A2 roms.
Click to expand...
Click to collapse
Thanks, That helped.. :victory:
Here's another possible solution for those who still get this error:
Status 7 error fix
Doesnt work!
zeyaan said:
try flashing the Rom the way u downloaded and don't try any modification or dint unzip and rezip, flash a fresh download.
full wipe required to boot
Click to expand...
Click to collapse
Well i have the same problem , though how it started is weird. i got CM11 working on the same model , when i tried retsore backup via recovery mode, it suddenly froze, said no data found , and eversince i cant do anything with the phone.i can only start recovery mode, or download mode . i cant flash it because ODIN doesnt add my phone , i have reinstalled samsung drivers several times with no luck . is there any other way to fix this ? can it be fixed at all ?:crying::crying::crying::crying::crying:
Copy cm11 to ext SD card using a card reader and flash it via cwm recovery. Good luck.
Sent from my GT-I9003
I'm trying to install cm 10.1 beta 7 on my HTC Pico using TWRP 2.4.1.0 but it gave me error why?
can anyone know how can i install dis rom?
now im on cm 9.1
plz reply
Which error? Most errors in recovery are due to bad zip, so try downloading again, or try deleting some apps from the zip first, then flash.
cm 10.1
I don't know which error. but I download the packege direct on my mobile using uc browser.
should i download cm 10.1 via laptop then move through data cable then flash?
Well except giving it a try, maybe your connection f****d up at some point, and the zip came out corrupt, also you can try deleting some apps from the zip and giving it a chance at least until the new one downloads
yes u r r8 when I'm download the package that time error comes at least 3 or 4 times.
that's why it gave me error?
Hi.
So my GT-I9003 is running on 2.3.6 Stock. I flashed Bagaria CWM so as to flash a CyanogenMod ROM. However, when I tried it, CWM gave a Status 7 error.
I then changed the updater-script as mentioned on one of the XDA Forums. This time when I tried flashing, CWM began the process and mid-way, the device went blank after which it rebooted on its own.
There was no error displayed, whatsoever.
Any help regarding this process is appreciated. Also, if an alternated process needs to be followed, please do mention it.
Thanks.
FYI - I tried CM 7 and CM 10 (Stable versions) and both didn't work.
To avoid status 7 error do All wipes, format system and flash from internal sd. No need to change anything in the roms.
Need help. I try to flash cm 10.1 in my 6802 but I found E:Error/sideload/pakage.zip
Status 7
Then i select reboot in cmw recovery phone freeze at there. Have to force boot and start to repeat samsung logo again and again. Then format data factory reset in stock recovery and after boot I loose a lot of function in stock rom like call issu,minimise,screen loock,app force close and i also loss root acess . Su binary outdated and alao failed to update.
samirryc said:
Need help. I try to flash cm 10.1 in my 6802 but I found E:Error/sideload/pakage.zip
Status 7
Then i select reboot in cmw recovery phone freeze at there. Have to force boot and start to repeat samsung logo again and again. Then format data factory reset in stock recovery and after boot I loose a lot of function in stock rom like call issu,minimise,screen loock,app force close and i also loss root acess . Su binary outdated and alao failed to update.
Click to expand...
Click to collapse
Redownload the package. The package might be corrupted or have incorrect signature.
Give me the authentic link.
krasCGQ said:
Redownload the package. The package might be corrupted or have incorrect signature.
Click to expand...
Click to collapse
I have . custom rom all were same prob but after flashing custom kernel of xda. 2 rom supposed cayanogen 4.4.4 kit kitkat r2 smart cyanogen 7.2 which doest support sim 2 and ext sd card and another custom rom by anish. but 10.1 still unsupported. give me advice.
Most disgusting image verification system.Trying more dn an hour.but failed.
samirryc said:
I have . custom rom all were same prob but after flashing custom kernel of xda. 2 rom supposed cayanogen 4.4.4 kit kitkat r2 smart cyanogen 7.2 which doest support sim 2 and ext sd card and another custom rom by anish. but 10.1 still unsupported. give me advice.
Most disgusting image verification system.Trying more dn an hour.but failed.
Click to expand...
Click to collapse
Maybe you should disable zip signature verification and try to flash again. Or try TWRP, since CWM development has been discontinued.
Status 7 error occurs when the package checks for device type and mismatch (not the proper device you should flash it on), MD5 checksum mismatch or broken package.