Hey guys
First of all: I think, I ****ed up.
So I was on a custom 5.0.2 Rom and it was really buggy (forceclose, lowmemory, etc.) and so I decided,
that it would be a good idea to go back to stock and flash Slimrom. As far, as I remember, I did the following:
1. Go into my custom recovery and delete everything (I know, I'm an idiot :crying: )
2. Go into fastboot and flash 4.4.4 via a script on my PC
3. Get problems, which I somehow resolve (pls don't ask me, how. I was pretty drunk last night.)
4. 4.4.4 is up and running. I download the stock 5.0.2 OTA files form XDA and try to flash them with TWM.
5. Everything is super buggy under 5.0.2, so I decide to flash back 4.4.4 and use the stock recovery.
6. 5.0.2 runs just fine and I begin to prepare for the custom Slimrom.
7. Install custom recovery, download Slimrom and GApps.
8. Flash Slimrom and get some weird error, that /system and /date can't be mounted. Everything ****ed up from there on...
9. Try to flash the stock 4.4.4 from before (using the script). Doesn't work, gets stuck on bootloader unlocked messege.
10. Try random **** (literally everything, I can find on the web.)
11. Write this post.
Some information, you could need:
XT1032
Fastboot version: 41.18
Unlocked (Status Code: 3)
Boots into recovery
Recovery is TWM 2.8.6.0
Things, I've tried: Flash the stock 4.4.4 system and then flash a custom rom, using TWM Didn't work
Reflash the stock "Kernel Module", found under /showthread.php?t=2649763 Didn't work
Flash an alternate "bootloader unlocked" Screen Didn't work
Please help me, guys :fingers-crossed:
Did you try manually flashing each partition for the 4.4.4 stock ROM? Since you are on a 41.18 bootloader, you should be able to flash every file except motoboot.
audit13 said:
Did you try manually flashing each partition for the 4.4.4 stock ROM? Since you are on a 41.18 bootloader, you should be able to flash every file except motoboot.
Click to expand...
Click to collapse
First of all, thank you for your quick response!
I was able to flash everything without any errors, but unfortunately, it is still stuck on the Warning screen.
Did you erase cache and userdata in fastboot?
audit13 said:
Did you erase cache and userdata in fastboot?
Click to expand...
Click to collapse
Yes, but it did not help
Edit: it gives me an error, when flashing gpt.bin.
it says:
(bootloader) Preflash validation failed
FAILED (remote failure)
So all files flahed except motoboot and gpt? The motoboot file from the stock 4.4.4 flash won't install becuase the 4.4.4 bootloader is older than the bootloader currently installed on your phone.
Even if the gpt.bin file doesn't flash, it doesn't always prevent the phone from booting a stock ROM.
Was the 5.02 ROM the GPE?
audit13 said:
So all files flahed except motoboot and gpt? The motoboot file from the stock 4.4.4 flash won't install becuase the 4.4.4 bootloader is older than the bootloader currently installed on your phone.
Even if the gpt.bin file doesn't flash, it doesn't always prevent the phone from booting a stock ROM.
Was the 5.02 ROM the GPE?
Click to expand...
Click to collapse
When trying to flash the motoboot.img, it says "permission denied" and when trying to flash the gpt.bin, it says "(bootloader) Preflash validation failed FAILED (remote failure)".
The 5.0.2 ROM was the OTA update, which in my case, is the normal motorola one. I did convert my device to a GPE, when Lollipop for the moto G GPE became availible (arround december),
but went back to the normal ROM to get the 5.0.2 OTA.
Thank you for your help :laugh:
Ok, I have used this: http://forum.xda-developers.com/moto-g/development/rom-4-4-4-stock-eu-1-click-easy-flash-t2879757 and i'm back in Stock 4.4.4. I have got no idea, how that worked but it's done
That's great that it worked.
If you want to get 5.02 OTA update, be sure to update Motorola Update Services app in the Play store before checking for updates.
Related
Hello everyone
I am new here.
I need some assistance with my moto g.
I previously unlocked my Moto G's bootloader but realised that I just wanted it on stock and locked so I didn't damage it, so I managed to relock my
phone's bootloader and got it back to a stock rom.
After installing a system update a few days ago, my phone came back with the
"Warning - bootloader unlocked!" logo after installing a system update.
So I decided to try and reflash the stock firmware and original logo.bin from the XDA Site.
However, my flashes are failing and my moto g is stuck in a bootloop with no rom to boot up to, I have adb minimal fastboot and motorola drivers
/ adb drivers installed.
What happens: I power on the phone into bootloader mode, then I try to flash the ROM I got from droid-developers site, but whenever I try to relock
my bootloader it shows the following:
...
Ready to flash signed images!
OK: (time)
I do fastboot flash partition gpt.bin and I get:
Preflash validation failed!
SST lock failure!
Also trying to issue the command to relock the bootloader gives me
SST lock failure!
I get other errors too when flashing the sparsechunk images, it gives: Invalid PIV signed image! and for motoboot and boot images it gives: Preflash validation failed!
version downgraded for boot.
etc
I cannot recover my stock rom due to these errors, I've searched everywhere (on google) and here and I am desperate to flash the stock rom back and relock bootloader again so I can use the phone.
I am really stuck and my phone will not get out of a bootloop
Any help is really much appreciated as I need to get my phone working so I can use it
You don't need to relock the bootloader. Just follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=2542219
lost101 said:
You don't need to relock the bootloader. Just follow this tutorial:
http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
I followed the tutorial, but when I get to the flashing stage, I get:
Preflash validation failed,
SST lock failure!
And version downraded for gpt.bin
it seems to be failing to flash these files.
What do I need to do?
You need to provide more information for people to help you. Have you upgraded to 4.4.4?
I had a similar issue when rooting my phone, and all I had to do was unplug the phone from the computer, restart the phone and computer, and then try again.
GrammarNazi said:
I had a similar issue when rooting my phone, and all I had to do was unplug the phone from the computer, restart the phone and computer, and then try again.
Click to expand...
Click to collapse
But did you downgrade from 4.4.4 to 4.4.2?
What model do you have?
Can you explain us all the steps?
Thanks
First unlock your bootloader again. You have to downgrade from 4.4.4 to 4.4.3 then to 4.4.2. During the downgrades you have to follow the same kind of firmware (example: 4.4.4 retail EU -> 4.4.3 retail EU -> 4.4.2 retail EU). When you're done if you want you can relock the bootloader.
Hi everyone, I hope you guys can get me a hand with this issue.
My Moto G, is briked. Its with bootloader version 41.18 (Lollipop) and its imposible to downgrade it becouse I get this message
"(bootloader) Preflash validation failed
FAILED (remote failure)¨
But is only that command, all others commands to flash the phone work properly (but I dont have any clue why its imposible to make Lollipop works, and I cant make KitKat runs with an 41.18 bootloader)
At this time, I dont care any more upgrade to Lollipop, I just want my phone back :crying:
Please help.
Thanks for you time.
unlock phone
preflash validation fail happens due to the locked bootloader . Either unlock bootloader to skip boot flash validation checks or flash stock factory image without unlockingbootloader in recovery mode . Standard recovery and factory firmware image .
I had this problem, I eventually took it back to the point of purchase after trying EVERYTHING! Have you tried flashing stock ROM ignoring the preflash validation error?
Sent from my XT1039 using XDA Free mobile app
You would have executed the following command when trying to downgrade to KitKat:
fastboot flash motoboot motoboot.img
It should not be done. Nevertheless, try installing paranoid android via a custom recovery.
fastboot flash recovery cwm-*.img
Once you are on 41.18 bootloader, you cannot flash an older motoboot.img over the existing image.
Even with a Lollipop bootloader, you can flash all images and the phone should boot.
I have an xt1032 and flash stock 4.4.4 Retail US with no problem.
ankushv said:
preflash validation fail happens due to the locked bootloader . Either unlock bootloader to skip boot flash validation checks or flash stock factory image without unlockingbootloader in recovery mode . Standard recovery and factory firmware image .
Click to expand...
Click to collapse
My bootloader is unlocked ("Status Code: 3"), but I cant flash the 41.13 bootloader, neverthles, I can re-flash the 41.18 without problem.
jasond567 said:
I had this problem, I eventually took it back to the point of purchase after trying EVERYTHING! Have you tried flashing stock ROM ignoring the preflash validation error?
Click to expand...
Click to collapse
Yes, if I flash my Stock ROM (Retail LATAM) it's never pass the "Warning Bootloader", just keep there until I turn it off. If I flash an 5.0.2 Rom, when I start the phone, takes me back to the bootloader with "Boot up failed" message
layman806 said:
You would have executed the following command when trying to downgrade to KitKat:
fastboot flash motoboot motoboot.img
It should not be done. Nevertheless, try installing paranoid android via a custom recovery.
fastboot flash recovery cwm-*.img
Click to expand...
Click to collapse
The problem is that I cant flash any recovery, I try CWM and TWRP. Always gives me an errero when I try too boot in to Recovery Mode.
Are you flashing the correct recovery? Try the latest Philz for your model of phone. The xt1032 is also known as falcon.
What errors are you getting when trying to flash recovery in fastboot?
audit13 said:
Once you are on 41.18 bootloader, you cannot flash an older motoboot.img over the existing image.
Even with a Lollipop bootloader, you can flash all images and the phone should boot.
I have an xt1032 and flash stock 4.4.4 Retail US with no problem.
Click to expand...
Click to collapse
Yep, I try installing Lollipop firmwares with "fastboot flash ......" but no one work
I have an XT1040, and there isnt an official 5.0.2 for this version of Moto G, but it should works, no?
audit13 said:
Are you flashing the correct recovery? Try the latest Philz for your model of phone. The xt1032 is also known as falcon.
What errors are you getting when trying to flash recovery in fastboot?
Click to expand...
Click to collapse
You were right! I was flashing a wrong recovery, I have XT1040 and for this one the name is "Peregrine", I already installed CWM and TWRP (both works, but no one read the SD Card)
I found an NIGHTLESS CyanogenMOD 12 for XT1040 but when I try to install it. I get this message (installing de *.zip with TWRP and CWM):
Code:
E: Unable to mount "/data"
E: Unable to mount "/cache"
E: Unable to mount "/system"
E: Unable to mount internal storage
Any ideas? :crying:
iyurcic95 said:
Yep, I try installing Lollipop firmwares with "fastboot flash ......" but no one work
I have an XT1040, and there isnt an official 5.0.2 for this version of Moto G, but it should works, no?
You were right! I was flashing a wrong recovery, I have XT1040 and for this one the name is "Peregrine", I already installed CWM and TWRP (both works, but no one read the SD Card)
I found an NIGHTLESS CyanogenMOD 12 for XT1040 but when I try to install it. I get this message (installing de *.zip with TWRP and CWM):
Code:
E: Unable to mount "/data"
E: Unable to mount "/cache"
E: Unable to mount "/system"
E: Unable to mount internal storage
Any ideas? :crying:
Click to expand...
Click to collapse
First, format /data/media
Then, /system
Then, /cache
Then, try to install the ROM.
Are you running GPE version of Lollipop on your xt1040? If you are, you may need to re-install stock 4.4.4, including flashing gpt.bin because the partition sizes may be slightly different between stock Lollipop and GPE Lollipop.
layman806 said:
First, format /data/media
Then, /system
Then, /cache
Then, try to install the ROM.
Click to expand...
Click to collapse
I'll try, but, where I should do that? I'm kind of lost with all this.
audit13 said:
Are you running GPE version of Lollipop on your xt1040? If you are, you may need to re-install stock 4.4.4, including flashing gpt.bin because the partition sizes may be slightly different between stock Lollipop and GPE Lollipop.
Click to expand...
Click to collapse
No, I dont install the GPE in the XT1040. Maybe could be what are you saying. Yesterday, I cant remember what I was trying to install and in fastboot, while I was flashing, said "Image is too large", but in de DOS windows on PC, it says "OK"
The issue is that I cant do a downgrade of gpt and de motoboot.
So, I should install 4.4.4 KitKat, (without flashing those 2 files) and try with the recovery installing CyanogenMOD 12? Or CMod12 not uses 41.18 bootloader?
Edit: I think that I cant install KitKat, bootloader gives me "Image is too large", the DOS windows says "OK", but Im thinking that really its not OK.
I install """succesfully""" an 5.0.2 Retail of Brazil, but for the XT1033 version. Really, I dont know if is GPE, but I was able to install all the files and the fastboot dont showme the "Image is to large" message.
Edit2: Withi is command in Terminal of TWRP
mke2fs -T ext4 /dev/block/mmcblk0p8
Click to expand...
Click to collapse
When I try to install the CyanogenMOD's zip, says "Unable to mount /system". So I think I fix the problem with /data. But if I'm right, now what?
Since your bootloader is unlocked and you never flashed a GPE ROM, go back to the start.
If you want to install a custom ROM, flash the recovery for your phone. If you get an error message in fastboot, write it down and post it here.
If you want to flash back to a stock ROM, are you flashing every partition except motoboot.img? Are you erasing cache and userdata at the end?
audit13 said:
Since your bootloader is unlocked and you never flashed a GPE ROM, go back to the start.
If you want to install a custom ROM, flash the recovery for your phone. If you get an error message in fastboot, write it down and post it here.
If you want to flash back to a stock ROM, are you flashing every partition except motoboot.img? Are you erasing cache and userdata at the end?
Click to expand...
Click to collapse
I cant flash any stock ROM for my phone yet becouse, stocks ROMs are until 4.4.4 KitKat using bootloader 41.13. and y cant downgrade my 41.18 bootloader
I am trying to instal CyanogenMOD 12 from my recovery (CWM and TWRP works properly) but I get this message
Code:
"E: Unable tu mount /system"
Here is a photo of the error
http://imageshack.com/a/img661/1201/n9u9Jy.jpg
Edit: I try "fastboot erase system" and "fastboot format system"... Both are done succesfuly, but I stil geting the same error. (Also, I cant mount /storage/sdcard1)
Where did you get the Lollipop bootloader?
Did you try to use fastboot or mfastboot to flash a stock ROM. I have an xt1032 with 41.18 and I can flash stock 4.4.4 ROM.
audit13 said:
Where did you get the Lollipop bootloader?
Did you try to use fastboot or mfastboot to flash a stock ROM. I have an xt1032 with 41.18 and I can flash stock 4.4.4 ROM.
Click to expand...
Click to collapse
I get it when I flash with fastboot an firmware from Brasil wich have 5.0.2.
I will try installing the firmware you have, could you paste me a link please? Is with Recovery installation or with fastboot?
You need to download the stock 4.4.4 firmware for your phone and follow this guide: http://forum.xda-developers.com/moto-g/general/restore-to-kitkat-lollipop-moto-g-t3011553
Did you install the right recovery? Try using Philz for the peregrine to install custom ROM: http://forum.xda-developers.com/moto-g/4g-development/recovery-unofficial-philz-touch-t2827332
audit13 said:
You need to download the stock 4.4.4 firmware for your phone and follow this guide: http://forum.xda-developers.com/moto-g/general/restore-to-kitkat-lollipop-moto-g-t3011553
Did you install the right recovery? Try using Philz for the peregrine to install custom ROM: http://forum.xda-developers.com/moto-g/4g-development/recovery-unofficial-philz-touch-t2827332
Click to expand...
Click to collapse
I followed the first guide and in the DOS window where you put the commands "fastboot flash...." everything goes "OK", but in the phone, the fastboot says "Image is to large" when is going to flash the "system" so Im thinking that its not flashing really
After reboots, the phones dont go further than "Warning Bootloader Unlocked"
I installed Philz for Peregrine, I try to install 2 customs ROMs differetns for XT1040 and I get
Code:
Opening update package...
Installing update...
detected filesystem ext4 for /dev/block/plataform/msm_sdcc.1/by-name/system at /system: invalid argument
unmount of /system failed; no such volume
detected filesystem f2fs for /dev/block/plataform
E: Error in /tmp/update.zip
(Status 1)
Installation aborted.
I 'm about to give up
After flashing the gpt.bin file, type fastboot reboot-bootloader and continue flashing. Maybe this will help.
did you find a way to fix it yet?
im having the same issue. and not able to do anything, i tried flashing cm12 didnt work.
**Bear with me as this is my first unlocking/rooting endeavor!**
I bought a brand new Moto G (XT1031) for Boost Mobile. It came with KitKat 4.4.4 pre-installed. I researched/followed guides and was able to unlocked it.
More research was done. I flashed the recovery software TWRP v2.8.6 via ADB fastboot. I then flashed SuperSU v2.46 via TWRP(zip file). Back up was created with TWRP. Attempted to install CyanogenMod 12.1, however, my bootloader version is "4113" so it said it was not supported. It seemed like changing the bootloader was a bad idea, so I did not pursue that idea. I tried to install CM 12, it was successful. I proceeded to install the gapps version for CM12. I rebooted the system.
It stayed on the boot screen(blue robot head) for a hour. I shut off and restarted the phone, it sat on the boot screen for about 30 minutes. It would not load. At this point I messed something up and had to clear everything and install a clean KK 4.4.4 image. I then tried CM12 all over again, but I was still stuck on the loading screen..
So my question is what can I do? Should I try CM11?(I could not find a DL link anywhere!!)
ANY help is appreciated, I have been at it all day..
MeLoDyz said:
**Bear with me as this is my first unlocking/rooting endeavor!**
I bought a brand new Moto G (XT1031) for Boost Mobile. It came with KitKat 4.4.4 pre-installed. I researched/followed guides and was able to unlocked it.
More research was done. I flashed the recovery software TWRP v2.8.6 via ADB fastboot. I then flashed SuperSU v2.46 via TWRP(zip file). Back up was created with TWRP. Attempted to install CyanogenMod 12.1, however, my bootloader version is "4113" so it said it was not supported. It seemed like changing the bootloader was a bad idea, so I did not pursue that idea. I tried to install CM 12, it was successful. I proceeded to install the gapps version for CM12. I rebooted the system.
It stayed on the boot screen(blue robot head) for a hour. I shut off and restarted the phone, it sat on the boot screen for about 30 minutes. It would not load. At this point I messed something up and had to clear everything and install a clean KK 4.4.4 image. I then tried CM12 all over again, but I was still stuck on the loading screen..
So my question is what can I do? Should I try CM11?(I could not find a DL link anywhere!!)
ANY help is appreciated, I have been at it all day..
Click to expand...
Click to collapse
First of all format data, system, cache, delvic cache and install the zip
pradeeppk said:
First of all format data, system, cache, delvic cache and install the zip
Click to expand...
Click to collapse
I have always went into advance wipe on TWRP and wiped the dalvik cache, data, cache, & system before each install of CM. I even wipe the cache in-between the install of CM and gapps.
I have never formatted before.
So I tried it and it deleted my zip files and my back up..
Now I have no OS so I cannot put new zip files of CM/gapps on the phone. I cannot back up because that was deleted -.-
EDIT: was able to flash a stock 4.4.4 OS back and get it to boot.. no idea what to do now ..can someone link me to CM11?
**UPDATE**
Tried lots of things..ended up updating the bootloader to 4119..which enabled me to finally install CM 12.1. BUT..CM would not boot again! Tried putting the stock rom back on, but failed, would not boot..
Now I cannot load any OS, I get stuck on the "warning your device is unlocked" screen. I can still get to the boot loader and recovery though..
I tried to flash back to stock with multiple guides I found via google, but none worked...
calling anyone to extend some help, or is my phone dead?
That's why flashing a "soak test" - scratch that - "test drive" bootloader is a bad idea.
You'll need to flash the KitKat firmware with mfastboot and skip gpt, motoboot, and logo img/bin's.
Sent from my XT1031™
ATTACK said:
That's why flashing a "soak test" - scratch that - "test drive" bootloader is a bad idea.
You'll need to flash the KitKat firmware with mfastboot and skip gpt, motoboot, and logo img/bin's.
Sent from my XT1031™
Click to expand...
Click to collapse
are you referring to steps like this:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
if so I have tried that and it fails
Yes, flash everything but "gpt", " motoboot" and "logo".
Sent from my XT1031™
ATTACK said:
Yes, flash everything but "gpt", " motoboot" and "logo".
Sent from my XT1031™
Click to expand...
Click to collapse
ah I see, thanks!
I was able to boot stock 4.4.4, however, the screen is a bit glitchy with a line constantly coming down. From what I have read it seems that is caused by the bootloader version 41.19 (that I upgraded to). Is there anyway to get 41.13 back?
..and I guess putting CM on this phone is a no go for whatever reason?
MeLoDyz said:
ah I see, thanks!
I was able to boot stock 4.4.4, however, the screen is a bit glitchy with a line constantly coming down. From what I have read it seems that is caused by the bootloader version 41.19 (that I upgraded to). Is there anyway to get 41.13 back?
..and I guess putting CM on this phone is a no go for whatever reason?
Click to expand...
Click to collapse
Nope - cant downgrade bootloaders.
As far as CM goes, I really wouldn't know, I don't use it. I prefer stock AOSP or Paranoid Android. There's a really nice build of Paranoid Android at Android Forums by Seraph08
http://androidforums.com/index.php?threads/851868/
Sent from my XT1031™
I have the same device as you, and I decided to upgrade my bootloader, and I was able to successfully get CM 12.1 latest nightly installed and working. Here's what I did:
First I started with full stock 4.4.4, flashed TWRP and upgraded my bootloader.
Then afterwards I installed one of the CM11 snapshots and then from there I flashed the latest CM12.1 nightly and everything seems to be working except data breaks sometimes, it usually fixes itself with a reboot.
Ninja3047 said:
I have the same device as you, and I decided to upgrade my bootloader, and I was able to successfully get CM 12.1 latest nightly installed and working. Here's what I did:
First I started with full stock 4.4.4, flashed TWRP and upgraded my bootloader.
Then afterwards I installed one of the CM11 snapshots and then from there I flashed the latest CM12.1 nightly and everything seems to be working except data breaks sometimes, it usually fixes itself with a reboot.
Click to expand...
Click to collapse
That worked for me I am on CM12.1 now!, thanks
Any idea if it is possible to get CM12.1 on a boost XT1031 with 41.13 bootloader, WITHOUT upgrading the bootloader?
Please, I have a XT1033 in which I can't install anything. If I try to flash the stock rom or a custom recovery, nothing happens. When I flash the stock rom, it gives ok for most of the files (except for gpt and motoboot, preflash validation failed), but when I reboot to the system, NOTHING HAPPENED, system and userdata was left untouched. I would appreciate any help. Thanks in advance.
Hi,
Silly question, i know, but is your bootloader unlocked?
Did you try to convert to GPE?
Yes, my bootloader is unlocked and I don't know if someone did try to convert it to GPE because this phone is not mine.
Could be a bad eMMC.
Sent from my XT1031
Just erase recovery, system ,cache and userdata via fastboot and flash twrp.
Try using latest 5.1 Firmware Images and mfastboot: https://www.androidfilehost.com/?fid=24052804347778493
Provide logs, copy and paste command prompt - screen-shots - the more information the better.
I'm unable to flash stock rom on my moto g turbo xt1557, with the fastboot method,
the actual problem is when i try to flash gpt.bin in the command getting the error
preflash validation failed remote failure.
since i've flashed this rom earlier it was succesfull at that time then i have installed twrp to try lineage os.
as now i want to revert back to stock , im unable due to the following error.
i'm trying the latest version of the stock rom which is availables\ still getting the error.
Please help.:crying :crying::crying:
Thanks :good::good::good:
vishal4950 said:
I'm unable to flash stock rom on my moto g turbo xt1557, with the fastboot method,
the actual problem is when i try to flash gpt.bin in the command getting the error
preflash validation failed remote failure.
since i've flashed this rom earlier it was succesfull at that time then i have installed twrp to try lineage os.
as now i want to revert back to stock , im unable due to the following error.
i'm trying the latest version of the stock rom which is availables\ still getting the error.
Please help.:crying :crying::crying:
Thanks :good::good::good:
Click to expand...
Click to collapse
Just skip that and do all commands,
Ojas25.8 said:
Just skip that and do all commands,
Click to expand...
Click to collapse
Dude. You mean to skip the flashing of gpt.bin
I have tried that too. Skipping the gpt.bin makes firmware flashing successful.
But after that problem is that phone get stuck on boot logo. Waited untill 30mins still no response.
vishal4950 said:
Dude. You mean to skip the flashing of gpt.bin
I have tried that too. Skipping the gpt.bin makes firmware flashing successful.
But after that problem is that phone get stuck on boot logo. Waited untill 30mins still no response.
Click to expand...
Click to collapse
Did you factory reset in stock recovery first? It's essential...